PDF TOC in Japanese illegible

Hi all,
I generate Japanese PDF documents with DocBook and Apache FOP (Version 1.0). For the Japanese text I embed MSP Gothic and also MS PMincho.
Both fonts are available on Windows 7 by default. When I look into the properties of the PDF document, all fonts are embedded correctly after the build process.
The Japanese text is displayed correctly in the complete document.
The problem I have is that the table of contents (TOC) on the left hand side in the Acrobat Reader is not displayed correctly. This problem only occurs in documents with Japanese letters. In documents with Latin letters, this problem does not occur. Currently I use Adobe Acrobat Reader version 11.0.3 to open the Japanese PDFs.
The problem with the table of contents in Japanese is as follows:
If the text is too long to fit into the line of the TOC, no line breaks occur but the line breaking option is activated. Additionally, the line height is too small so that only half of the line is displayed in the TOC.
Please see the attached screenshot for a demonstration of this problem:
However, to make this problem even more complicated, this problem does not occur on every PC where the PDF file is viewed. It seems to be arbitrary whether or not this problem occurs as we tested it on PCs with the same operating system (Windows 7) and with the same versions of Adobe Acrobat and sometimes it occurs, sometimes it doesn’t. Therefore this problem is hard to reproduce.
Please see the attached screenshot for a demonstration of the correct view:
Has anyone had this problem, too? Is this a known or common problem? Does anyone have a workaround for this problem?
Any help is appreciated.
Thanks a lot in advance. Best regards,
tester

tester4545123 wrote:
It seems to be arbitrary whether or not this problem occurs as we tested it on PCs with the same operating system (Windows 7) and with the same versions of Adobe Acrobat and sometimes it occurs, sometimes it doesn’t.
That is always a tough thing, and most difficult to diagnose! The first thing I would suspect in such a case is that the Adobe Reader settings (Preferences) may be different on different systems?
Are these documents confidential, or can you share such a PDF with us? (See http://forums.adobe.com/thread/918624)

Similar Messages

How can i translate a pdf document in japanese language to english language

how can i translate a pdf document in japanese language to english language

Hi trueman9299,
ExportPDF uses OCR (optical character recognition) to convert image (scanned text) to editable/selectable text, but it doesn't translate from one language to another.
Best,
Sara

PDF TOC Issues

I am using RoboHelp 8 and the topic titles are truncated in my PDF table of contents. For example, the topic title is Java SDK and it appears as SDK in the TOC. Why are the topic titles truncated and how do I fix this issue? The TOC appears quite good in the Word ouput, but the PDF output is terrible.
One other thing - in the PDF TOC I am getting blank lines with just the leader (..........). The Word doc is not formatted this way. Is tehre any method for fixing this?
Also, I noticed that images are not exported when the PDF/Word document are built. Is there a method for including these images in the build?
Thank you in advance.

I was getting a "Missing Font" message and the explanation on the forum is that a bug in 10.6.7 caused the OS to UNEMBED fonts in PDF files!
Don't know who said that, but it's incorrect.
I built a simple text document with three lines of text. Opened three fonts not on the system, applied one each to a line of text and saved a PDF using Apple's built in PDF generator.
I then disabled the fonts and deleted them. With no fonts to find and the comment being true that fonts are not embedded, the PDF should display incorrectly. It didn't. I looked exactly as it should, meaning the fonts had to be embedded in the file.

Writing into a pdf file in japanese

We have to write to a PDF file using java. For this purpose, we are using a free package downloaded from the internet. We are now able to write to PDF using this package. We also have to write Japanese text to PDF. This package is not supporting that. I feel, we need to set a few things like encoding type, base font, Mapping files etc. Please direct me to any source where i can get help.

I am able to display the Japanese charatcers in the PDF file when using Japanese Regional Settings on Windows OS. But this Japanese text appears only when the Text is selected on the PDF file.
When Changed to English Regional Settings, the Japanese text is not written correctly in the PDF file.
I am using iText along with itextAsian.jar. JDK version is 1.4.2
Does anyone have a clue how to write into the PDF using Japanese in English Locale?

Pdf generation in japanese

Hi
I am able to generate a pdf file using java.The pdf file should have japanese strings in it.When i give some japanese text it appears as inverted question marks in the pdf file.
FYI :My default regional settings is Japanese.I am using iText libraries
Please help.

I want to downlaod the output generated by the following code
Document document = new Document();
try {
PdfWriter.getInstance(document, new FileOutputStream("download.pdf"));
document.open();
document.add(new Paragraph((String)session.getAttribute("downloadResult")));
document.close();
catch(DocumentException de) {
System.err.println(de.getMessage());
catch(IOException ioe) {
System.err.println(ioe.getMessage());
Can you please help me how I can allow the user to download the result.

Pdf TOC doesnt work in ADE

Can someone help me with this query at the earliest possible?
We are using ADE to read pdfs due to some DRM restriction. However the TOC in the left pane stays as a list and has no links actively mapped to the content. The strange thing is the links are perfect when used in Adobe Reader.
Does ADE not support TOC in pdf files?
Is there any workaround to fix this issue?
Any help on this is truly appreciated.

ADE does not incorporate all of the features in Reader. The HELP section
of ADE has more information on what features are included and which ones
are not.....
===================

Poor implementation: image bugs and PDF TOC non functional

I have just completed my new eBook, which I made the mistake of writing in Pages 5 (latest version).
First, the Table of Contents is no longer active in teh exported PDF.
Second, I had an awful lot of buggy behaviour in this picture-rich book. Pictures mirroring; randomly changing pages; being swapped; losing the "keep with text" option; not being able to go where I want them; etc.
But worst of all, when I try to go back by exprting to Pages 09, that seems ot work.. expcet Pages 09 then says "The document <name> couldn't be opened".
I seem stuck. Any workarounds, anyone?
Michael
PS I already announced the new book, as I was sure I;d be releasing imminently...
http://www.speedlighter.ca/e-books/ebook-impactful-travel-photography/

Ok. It's 3am and I can't sleep. Peter, do you need my help with Mavericks? Mine purrs despite the name.
I may be off base here, but do I remember correctly a post from this year or last where someone ran up against a aggregate image size ceiling in Pages ’09 while creating a book. If that condition is in fact true, and Pages v5 increased this ceiling, but fails to check for it in Pages ’09 exports, could this be a contributing factor in the current issue?

Japanese Language Text in PDF Output of Purchase Orders

Hi,
We are using a custom smartform to create a purchase order output and send it as an email to the Vendor.
Std Program /SMB40/FM06P is used. We have setup the configuration for External Message and this is working fine.
We have the following 2 issues
1. We wish to over-ride the email address picked up by the Program. By default SAP picks up the vendors email address maintained in Vendor master. Is there any way to overide this?
2. The purchase order contains Japanese language texts. These Japanese texts are not getting updated correctly in the PDF file. They are displayed as junk characters.
Please note that if I view print preview of purchase orders in mE23N the display is perfectly fine. Also I executed a report in the background and then converted the spool to a PDF file. The PDF file displays Japanese characters correctly.
Any inputs on the above is welcome. Issue no 2 is more seriously affecting us.

Hi,
For issue # 1. Check OSS note OSS 852250... you need to include this logic en get_addr_key in print program: /SMB40/FM06PE02
IF is_nast-parnr NE space AND
       is_nast-parnr NE is_xekko-lifnr.
      "-- Get address from partner -
      SELECT SINGLE * FROM lfa1 INTO ls_lfa1
      WHERE lifnr = is_nast-parnr.
      MOVE ls_lfa1 TO cv_addr_key.
Notice that line:
MOVE ls_lfa1 TO cv_addr_key
Should be
MOVE ls_lfa1-adrn TO cv_addr_key
About issue # 2.
I am facing the same problem, have you been ablo to resolve it?
Thanks

Problem while exporting to PDF with japanese character in Crystal Report X1

Hi,
I am using Crystal report X1 with classic ASP on a Windows 2003 Enterprise Server, SP 2. In my application, I have to export the report into PDF, CSV, DOC formats. I am have Japanese strings in the report. While exporting to PDF, empty boxes has displayed in the place of Japanese string and in CSV file, question mark has been displayed instead of Japanese string. But the Doc file is exported correctly. I have not installed any language support software either in server or in client machine. I have used MS Gothic and Arial Unicode MS fonts for the text-objects which has Japanese strings.
Please give me a solution so that I will get PDF file with Japanese strings instead of empty box or question mark.
Do I need to install any language support pack software?
Thanks in advance.
Regards,
Manju

Hi Don,
Thank You for your reply. I have resolved the issue of exporting to pdf from crystal report X1 having Japanese data after installing the language pack.
But when I am exporting to CSV or TXT, i am getting ??? instead of Japanese characters. I have tried "export" through crystal report designer and got ??? instead of Japanese.
The Crystal report version I am using is Crystal report X1 11.0.0.1282
Crystal Report Desinger is installed in Windows Xp machine
Font set for Text object is Arial Unicode MS, MS PMincho, MS PGothic
Does the Crystal report X1 11.0.0.1282 has the UTF-8 support for CVS / txt
Please provide me a solution
Thanks in advance,
Regards,
Manju

PDF output does not match Frame TOC

My Frame TOC is accurate, the tags are correct. My PDF output has the correct Units in place. However, in the PDF TOC on the left nav, the Unit 5 Lessons appear in Unit 4, the Unit 6 Lessons appear in Unit 5, Unit 6 has no Lessons, Unit 7 is correct. I have spent a full day troubleshooting this. Does anyone have an idea what the problem might be?

Strange things can happen thanks to the PDF setup > Bookmarks tab, though I suspect you have already checked that. I've occasionally shot myself in the foot by using two styles for level 2, for example, and not noticing that one of them had decided to sidle into the .pdf navigation as level 3 …
Counsel of despair, if you have full Acrobat, would be to adjust the bookmarks manually so you can hand over the deliverable. Hope someone will come up with a more convincing answer, though!

PDF file displays boxes instead of Japanese characters

Hi,
I am creating PDF files with a custom third-party set of sortware tools (Infragistics NetAdvantage).
This particular PDF document contains Japanese text using the Meiryo font and this font is embedded into the PDF file. It works fine in Windows (using the Adobe Acrobat Reader application), even on a machine where Meiryo is not installed.
But when viewed on the iPad, the text is displayed as a bunch of empty boxes.
Also, I'm not sure if it's related, but when viewing the same document on Window XP using FoxIt (instead of the Adobe Acrobat Reader), the text is not shown at all - there's just an empty space and not even boxes.
I would love to attach a sample PDF file here, but I don't see any way to do that... is there a way to attach files to these questions?

So the empty boxes are indeed shown by built-in preview, and Adobe Reader is also not able to render the content and it appears as blank.
After investigation , it turns out that system fonts on ipad does not have the required glyphs ( ~ symbol ) to render these characters. This is Apple’s bug and you may have to report this issue , indicating that it is not rendered in Preview / i-books on the ipad.
Sorry for the inconvenience.
Thanks,
-vaibhav

BO Publication - PDF format doesn't show Chinese/Japanese language characte

Hi All,
When I try to Publish a report to PDF the Chinese/Japanese language characters disappear. Same report when published as Excel shows all the language characters.
Any suggestions to resolve the issue?
Thanks,
Hema

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Flipping/Sliding; PDF export losing TOC

When viewing my book in iPad, as opposed to classic animation of flipping, the pages are sliding both in portrait and landscape mode. Is there a setting to create this experience? I thought that it would be a default one. I tested other books; they are nicely gives the actual page flipping experience
When I exported my book to PDF, TOC is lost in the PDF. Any idea why?

thanks for the pointer....Here is what it says
If you use Pages, as an example, and create a (industry) standard epub, you'll have the page turn animation built in. iBooks Author outputs a 'hybrid' epub with scroll/swipe navigation by default only and as a result, page turn animation is not available.
So the short answer is - "no - you can't do this"? I am little confrused....

Convert OTF to PDF and print PDF from Spool

Hi,
I have searched all the forums and service market place but could not find solution to my problem.
I am using Function module
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = p_spool
      no_dialog                = 'X'
      dst_device               = 'ISJB'
      pdf_destination          = 'S'
    IMPORTING
      pdf_bytecount            = lv_bytecount
      pdf_spoolid              = lv_spoolid
      otf_pagecount            = lv_pagecount
      btc_jobname              = lv_jobname
      btc_jobcount             = lv_jobcount
    TABLES
      pdf                      = gt_pdf
    EXCEPTIONS
      err_no_otf_spooljob      = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_dstdevice        = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
this generates spool in SP01. Ideally it should generate a PDF spool file but it generates a BIN file of Format G_RAW. When I display the spool it displays all kinds of japanese characters which does not make sense,.
I setup printer ISJB with device type JPPDF (PDF converted for Japanese characters). Does any one know where the problem could be? Why I could not print the Spool in PDF?
Thank you,
Jagadish

Hi,
check out this program which will convert spool to pdf
REPORT zsmartform_spool_g.
*************Types Declaration ****************************
TYPES : BEGIN OF gty_tab,                          " Spool Requests
        rqident   TYPE tsp01-rqident,              " Spool request number
        rqdoctype TYPE tsp01-rqdoctype,            " Spool: document type
        rqo1name TYPE tsp01-rqo1name,             " TemSe object name
       END OF gty_tab.
*********Work Area ****************************************
DATA: form_name TYPE rs38l_fnam,      " Used to get the function module of Smartform
      wa_outopt TYPE ssfcompop,       " SAP Smart Forms: Smart Composer (transfer) options
      gs_tab    TYPE gty_tab.         " Spool Requests
*******Internal Table Declarations ************************
DATA: gt_tab TYPE STANDARD TABLE OF gty_tab,       " Spool Requests
      gt_pdf TYPE STANDARD TABLE OF tline,         " SAPscript: Text Lines
      gt_spoolid TYPE tsfspoolid,                  " Table with Spool IDs
      gt_otfdata TYPE ssfcrescl.                 " Smart Forms: Return value at end of form prnt
*********Variable Declarations ****************************
DATA: gv_bytecount   TYPE i,               "#EC NEEDED " PDF Byte Count
      gv_file_name   TYPE string,                    " File name
      gv_file_path   TYPE string,                    " File Path
      gv_full_path   TYPE string,                    " Path
      gv_binfilesize TYPE i,                         " Bin File size
      gv_rqident   TYPE tsp01-rqident,               " Spool request number
      gv_name TYPE tst01-dname,                      " TemSe object name
      gv_objtype TYPE rststype-type,                 " TemSe: Object type name
      gv_type TYPE rststype-type.                    " TemSe: Object type name
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = 'ZPDF_G'
    IMPORTING
      fm_name            = form_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Get Spool IDs
wa_outopt-tdnewid = 'X'.
wa_outopt-tddest = 'LP01'.
CALL FUNCTION form_name
    EXPORTING
      output_options   = wa_outopt
      user_settings    = 'X'
    IMPORTING
      job_output_info = gt_otfdata
    EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Assign the spool id
gt_spoolid = gt_otfdata-spoolids.
Generate spool and pdf for the output of the form
PERFORM sub_generate_spool_pdf.
END-OF-SELECTION.
*&      Form sub_generate_spool_pdf
      Generate Spool and PDF output
FORM sub_generate_spool_pdf .
DATA: ls_spoolid LIKE LINE OF gt_spoolid.
*----Get the Spool Number
CLEAR ls_spoolid.
READ TABLE gt_spoolid INTO ls_spoolid INDEX 1.
IF sy-subrc = 0.
    gv_rqident = ls_spoolid.
ENDIF.
CLEAR gt_tab.
SELECT rqident rqdoctype rqo1name INTO TABLE gt_tab
           FROM tsp01 WHERE rqident = gv_rqident.
IF sy-subrc = 0.
    CLEAR gs_tab.
Get the TemSe: Object name into variable gv_name
    READ TABLE gt_tab INTO gs_tab INDEX 1.
    IF sy-subrc = 0.
      gv_name = gs_tab-rqo1name.
    ENDIF.
ENDIF.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
    EXPORTING
      authority     = 'SP01'
      client        = sy-mandt
      name          = gv_name
      part          = 1
    IMPORTING
      type          = gv_type
      objtype       = gv_objtype
    EXCEPTIONS
      fb_error      = 1
      fb_rsts_other = 2
      no_object     = 3
      no_permission = 4
      OTHERS        = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Check if temse object name type is 'OTF' or 'LIST'
IF gv_objtype(3) = 'OTF'.
    PERFORM get_otf_spool_in_pdf.
ELSE.
    PERFORM get_abap_spool_in_pdf.
ENDIF.
Generate F4 functionality from spool to pdf
PERFORM write_pdf_spool_to_pc.
ENDFORM.                    " sub_generate_spool_pdf
*&      Form get_abap_spool_in_pdf
      Generate the Spool number
FORM get_abap_spool_in_pdf .
REFRESH gt_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = gv_rqident
    IMPORTING
      pdf_bytecount            = gv_bytecount
    TABLES
      pdf                      = gt_pdf
    EXCEPTIONS
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_abap_spool_in_pdf
*&      Form get_otf_spool_in_pdf
      Generate OTF data from the Spool Number
FORM get_otf_spool_in_pdf .
REFRESH gt_pdf.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = gv_rqident
    IMPORTING
      pdf_bytecount            = gv_bytecount
    TABLES
      pdf                      = gt_pdf
    EXCEPTIONS
      err_no_otf_spooljob      = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_dstdevice        = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_otf_spool_in_pdf
*&      Form write_pdf_spool_to_pc
      Generate PDF format
FORM write_pdf_spool_to_pc .
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    CHANGING
      filename             = gv_file_name
      path                 = gv_file_path
      fullpath             = gv_full_path
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
----DOWNLOADING THE PDF DATA***
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize            = gv_binfilesize
      filename                = gv_full_path
      filetype                = 'BIN'
    TABLES
      data_tab                = gt_pdf
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " write_pdf_spool_to_pc

There was a problem reading this document (109) on Japanese PC

We have an app written with Delphi 2006 and using Rave Reports to generate PDFs. A Japanese user of our software cannot open the PDFs (with Acrobat reader) our software produces when they run our software on a Japanese version of Windows (probably Win7). I have the same problem if I try to open the same PDF (which they have sent us) with Acrobat reader on an English-language Win XP machine :
There was an error processing a page. There was a problem reading this document (109)..
Ctrl-OK produces "object label badly formatted"
PDF files produced on English installations of our software read fine on our PCs and on the Japanese user's PC
Does anyone have any idea where this error is coming from?
Thanks,
Ross

Hi Pat,
Thanks for looking at this.
Yes, there are almost certainly Japanese characters. If you look at the second (readable) version I sent you can see where part of the date has been rendered incorrectly - this is because they have their regional settings arranged so that the Japanese year character is used, and the version of Delphi we use doesn't support those multibyte characters.
It seems unreasonable for Acrobat Reader to choke on this however.
Here'a binary dump of the relevant part of the file

PDF TOC in Japanese illegible

Similar Messages

Maybe you are looking for