PE 10 TRIAL: all clips inserted get changed to "created with PE 10 trial version"

Installed PE 10 trial version. when I add clips, immediatly they get changed to " created with Adobe Premier Elements trial version". It happens all the time. Inserting one two or any number of clips, they all get changed to "created with Adobe Premier Elements trial version". I can save the project and when I open it up it's the same results. Any ideas as to what to try to solve this problem?

>clips are from a canon powershot a710 camera
Video from a still camera will "often" use the MJPEG (Motion JPEG) codec... but, read on...
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
And... more on learning the program
Importing Video http://forums.adobe.com/thread/1065281
Saving & Sharing http://forums.adobe.com/thread/1051093
-v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
Right click PDF link in the upper right corner and select to save to your hard drive

Similar Messages

TS3276 Hello all, I am getting the following message with some emails I receive:- HTML enabled email client required to read this email. I don't really understand this and don't know what to do to allow me to open the email. Any help? Thanks, Alex

Hello all, I am getting the following message with some emails I receive:- HTML enabled email client required to read this email. I really don't understand this message, am non techy, would anyone know how I can open and read the email? Thanks very much for any help, Alex

In Mail I suggest you try 'View->Message->Plain text alternative'.
Why? In multipart/alternative messages, such as this, the text/plain version should precede the text/html version, but Toyota have swapped them around. By default mail clients display the second version, assuming it to be HTML.
Very strange.

Adobe Premiere shows "Created with Adobe Premiere trial version"

Adobe Premiere shows "Created with Adobe Premiere trial version" I thought it's a fully function trial isn't that right? I made one project to test the program and it didn't have that on the screen but when i started working on the second one it started showing the message on all the videos "fyi i just downloaded it today"
I appreciate your help

It may depend on which Codec you are using. I know we had to reduce the functionality of Premiere in the past due to licensing concerns. Was there differences in the encoding you used for the video between the two projects?

Why do I get a "can't import spreadsheet because it was created with an unsupported application version" alert when the updated version was purchased direct from the Mac App Store? The spreadsheet is now lost somewhere!

Why do I get a "can't import spreadsheet because it was created with an unsupported application version" alert when the updated version was purchased direct from the Mac App Store? The spreadsheet is now lost somewhere!

Pages 4.3 should still be in an iWorks folder within your Applications folder.
http://www.apple.com/feedback/pages.html

Hi all, i just updated my iphone 3gs with 5.0 ios version and now i cannot configure the iphone with it because itunes is not recognizing my iphone

hi all, i just updated my iphone 3gs with 5.0 ios version and now i cannot configure the iphone with it because itunes is not recognizing my iphone

Contacts are NOT part of the iTunes backup. If you had read the User Guide when you got your phone, you would have learned that Apple recommends you synch your contacts for safekeeping to your computer (Outlook, Address Book) or a cloud service. Using the phone as your only source of your contacts is foolish as the phone can easily be lost, damaged, stolen, or the data become corrupt.
If you've been using your phone as strongly recommended, your contacts are safe and sound on your computer or cloud service ready to be synched back to your phone. Of course, you should be backing up your computer regularly as well.
If you haven't been doing this, your contacts are likely gone.

Movie Clips Actions Get Out Of Synch With Audio

My movie is five about minutes long with audio and an offscreen timeline move clip containing action script to control other movie clips or play the root directory. After about a minute or so, movie clips get out-of-synch with the audio, apparently its getting bogged down.
My swf file doesn't seem that big, about 2.2MB and my move clips aren't that complex, although up to three levels deep.
My version is Flash 8 Professional and my laptop was on the high end about 18 months ago.
Am I missing something or expecting too much from Flash?
Thanks,
Mike (who seems to know enough to be dangerous)

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

Changing Role created with Customizing Auth. Utility

I created a role in PFCG using the Customizing Auth. option under Utilities by referencing a project view that I created in the IMG. My intent was to create a security role with access to all of the SPRO tcodes and related security objects. I then modified that role so that it only granted display access to these transactions.
Later, I discovered that this role also granted access to SE38, SE37, SA38 and other critical transactions. I know this will raise concerns with my auditors so I attempted to delete these transactions from my role. I was unable to do this because my role was created with the Customizing Auth. option.
Does anyone know of a way that I can remove these tcodes from the S_TCODE object?
Thanks,
Dennis Beausoleil
<telephone_number_removed_by_moderator>
Edited by: Julius Bussche on Feb 23, 2010 12:04 PM
Please use your business card options for such details.

>
Dennis Beausoleil wrote:
> I created a role in PFCG using the Customizing Auth. option under Utilities by referencing a project view that I created in the IMG. My intent was to create a security role with access to all of the SPRO tcodes and related security objects. I then modified that role so that it only granted display access to these transactions.
>
> Later, I discovered that this role also granted access to SE38, SE37, SA38 and other critical transactions. I know this will raise concerns with my auditors so I attempted to delete these transactions from my role. I was unable to do this because my role was created with the Customizing Auth. option.
>
> Does anyone know of a way that I can remove these tcodes from the S_TCODE object?
>
> Thanks,
>
> Dennis Beausoleil
> <telephone_number_removed_by_moderator>
>
> Edited by: Julius Bussche on Feb 23, 2010 12:04 PM
> Please use your business card options for such details.
Dennis,
In PFCG authorization change, inactivate the S_TCODE auth object then manually add S_TCODE and enter/paste the desired transactions with the exception of SE38, SE37, SA38 and other critical transactions.
Good Luck!

After opening HFM forms in excel the colour in all other file get changed

Hi,
Once we open (import) HFM web form in excel via smartview and refresh it, color in all other excel files (normal excel file) change to black and we have to close all the excel file to to get rid of this issue. Its happening onlywith few users. Is there any setting in excel or in hyperion smartview to fix this problem?
Thank you in advance for your help.
Regards,
Aj

I also think its not SV related issue and it is purely excel issue. I checked all the options in excel but could not find what causes such changes. Only some users are facing such problem and all the excel option setting are identical in two computer one with problem and other without any such problem.
Regards,
Aj

How to get rid of 'created with adobe elements 9 trial version' message off my video?

I have created a film using the trial version and this message is right in the centre of the whole thing! Does anyone know how I can get it off?
Help :S
Hann x

Hanna,
Some considerations with the trial of CS5: obviously, only 30 days of usage, nothing MPEG-2 is supported, and many other flavors of MPEG are also not supported. This means that you will NOT be able to ingest anything MPEG-2, likely nothing AVCHD, or similar, and you will NOT be able to use Encore for any DVD/BD authoring in the trial. Though there is no watermark, the CS5 trial is very, very limited, and one can really only edit DV-AVI, and Export to DV-AVI, or very similar.
Neale's suggestion is the best solution, IMHO. There are also freeware editors, like Womble, that might work for you, but there is a learning curve, due to the GUI.
Good luck,
Hunt

All i'm getting is a screen with a red X saying to go to the apple website!

Today my iPod suddenly wouldn't play anything, then it would skip ahead to the next song by itself, still not playing any of them, then after a bit of this, it completely died and now the only screen I get (when I hold down menu and select) is a red X and the url of the apple site. Nothing I do makes anything else happen, and when I plug it into my computer to charge it, I get the same screen, my iTunes doesn't even recognize that it's plugged in.
It didnt get wet or dropped, I was listening to it just fine when this happened.
Furthermore, I cannot read my serial number because the numbers have worn off and they're really small besides, so I can't use any of the support features because they all require your serial number! There are no service centers in my state, and I don't have my box or anything that came with it when I bought it either (over a year ago) so is there ANYTHING I can do?

Everything is working properly now...no need to respond!!!!

My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
Erase and Install Snow Leopard
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. When completed quit DU and complete the Snow Leopard installation.

How can I get past the problem with the Illustrator trial download?

I have tried to download the free trial multiple times and it always just freezes. Anybody else having that problem? Any solutions?

mom,
Have you installed the Creative Cloud management (in the list of apps on the cloud download page, find the adobe manager. That must be downloaded and installed first. Most browsers will jump to that install when you select one of the other apps first. But some browsers are having a problem doing so. Once the manager is installed and running, you can find illustrator listed in the manager. Click the install link next to the Illustrators name. That will download and install illustrator for you)?
Beyond that, this may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
Creative Cloud membership support

Cannot get an invoice created with IWork Numbers to open correctly in Excel

I used the Template in Numbers to create an invoice,and it's great.
However, I cannot seem to open this file in Excel no matter how I send it, no matter how I save it.
Have saved as windows friendly, have saved as Excel file.
I have to be able to have these opened by others with Excel and/or OpenOffice and, Office staff must be able to work with the file to update/modify invoices.
I even tried Pdf and Adobe Acrobat Pro thinking they would be able to do data entry that way-No luck.
Desperately need a solution or a year of working with IWork is going to be lost.
We have now added staff, and in other locations, and have to be able to work across platforms.
No problems importing Office files of any type, but have to be able to export as well and have cells and formatting remain workable.
I can open the files in Excel but they are unusable, in several pages, basically no invoice template left.
Thanks for any help.
Charles1

If you are getting three Excel worksheets, the export is working as designed. You have to remember that the heart of an Excel worksheet is a monolithic table. Everything is aligned in a tabular grid. Numbers, on the other hand, allows you to have multiple tables on the same sheet that have different column and row widths and the tables can be placed wherever you like, offset from the other tables by whatever amount you desire in any direction you desire. The invoice template is a good example; the two tables are very dissimilar in format and in column widths. If Numbers was to export the two tables from the invoice template into a single sheet of an Excel workbook, which column widths would it use? The ones from the first table or the ones from the second? No matter which it chose, the result would be quite different from what is in Numbers. Now include some text boxes, graphics or charts. With the tables moved around and resized to align to the Excel grid, these other items would also have to be moved around. But to where. It would be impossible to make an exported file look anything like it did in Numbers except in specific instances. This is why Numbers creates separate Excel sheets when it converts to Excel.
I know that diatribe did not help you solve your problem. To solve your problem, everything must be designed as one table in Numbers. Here is how you can do it. It is a bunch of steps but is really simple to do.
1) Select all the rows from the first table.
2) Drag them sideways out of the table and drag them to the second table, inserting them just below the first row. I think this is explained in the Numbers User's Guide.
3) Add a new row below the rows you just inserted (this will become your new row 8)
4) Select the cells in row 1. Copy. Paste to your new row 8.
5) Delete row 1
6) Go to the Table Inspector and turn on Name (check the checkbox). Name it Invoice.
7) Back at the table, deselect the table if it is still showing the column letters and row numbers in order to see the table name
8) Click twice on the table name above the table to select it. It will box it in, it does not select the text.
9) On the toolbar, change the font size and color and set it to left justification.
10) Delete the textbox with the word "Invoice" in it.
11) Delete the textbox with "sincerely yours ... Your name". Or, if you want to keep it, add another footer to the table, increase the height of that new footer and type "Sincerely yours," and your name in there. Note that you use option-return to create the linefeeds in the cell.
12) Select the table and slide it up toward the top of the sheet.
13) Adjust the column widths as best you can. I increased the column width of column B and right justified the text in cells A1-A6 and C1-C6 to get it looking okay. You might, instead, choose to insert a column or two and merge some cells together to align everything like you want it. And you might choose to add a row or increase the gridline width between the top half and the bottom half. I did not do those last few things. You can play around to get the design you like best.
The export looked almost exactly like the Numbers document.
Message was edited by: Badunit

"Created with Adobe Premiere Trial Version" banner on my project

I downloaded the Premiere Pro trial and I completed my project but I don't want to export it because of a banner through the middle of all my clips.
Will that banner be there when I export?
Thanks.

Never ever seen any Adobe watermarks.
Is this a new thing?

PE 10 TRIAL: all clips inserted get changed to "created with PE 10 trial version"

Similar Messages

Maybe you are looking for