PE7 Timeline and Share time problem
I compiled a video that on the timeline shows as 9 minutes 42 seconds, but when I try to Share the compiler tells me is 14 minutes long (too long for You Tube). Why is there a difference between these two? If I look at the timeline carefully I can see a "ghost" that runs longer than the video and is about the same as what the compiler is telling me will be the uploaded time, but I cannot find anything that causes the extension and PE will not let me do anything with it -- is this related to my problem.
Then, when I split the video into two parts, with one being 7 minutes and the other about 3, the compiler does not recognized that I have shortened the video -- still shows the same (too long) time that I saw in the first attempt. Any ideas why this happens?
Any/all help appreciated.
After an editing session, before Export/Share, I always hit the "\" key (back slash) to zoom out the Timeline to fit the screen. This will show everything that is on the Timeline, including any "strays." These are fairly easy to get, due to what I think is a "quirk" in the way PE edits. It is not a Bug, but just a quirk. If you have Snap on, and move a Clip too "hard" against the preceeding Clip, say by one frame passed the Tail of that Clip, a frame (or two) will be lopped off and go to the end of the Timeline. This is not readily evident. Then, after editing and tightening up your Clips, these "strays" will be hung out at the end, and you will likely not see them, except by playing your Timeline completely, until it stops, by hitting the "\" key or by hitting the End key and looking carefully.
Good catch on Paul's part, and glad you got it sorted out,
Hunt
Similar Messages
-
IP device tracking and idle timer problem
Hi,
We are deploying 802.1X in our network and have encountered problem with a type of payment terminal.
The problem is that the terminal do not 'speak' to the network after the first initial DHCP request, the terminal waits for incoming packets from a counter to start the payment process. After the idle-time the MAC is flushed from the switch and the port is not authorized any more.
To solve this we set 'authentication control-direction in' on the port and use 'ip device tracking' to keep the client on the network, ip device tracking sends an arp request every 30 seconds to clients.
Our ISE is sending Radius:Idle-Timeout = 300 and the timer start to count down when the client is authenticated.
In Wireshark, I can see that the ARP request is going out and the ARP reply coming back in but this does not update the inactivity timer for the client. So after 5 minutes the port is gone, and there is no way to get the port up again from the network. Traffic from the client brings up the network.
This looks like a bug to me, anyone seen this, or a similar behaviour?
Running:
ISE 1.2p6
IOS 12.2(55)SE6
From Trustsec 1.99 Wired 802.1X Deployment Guide:
Tip Enable IP Device Tracking with inactivity timers to keep quiet endpoints connected. When IP Device Tracking is enabled, the switch periodically sends ARP probes to endpoints in the IP Device Tracking table (which is initially populated by DHCP requests or ARP from the end point). As long as the endpoint is connected and responds to these probes, the inactivity timer is not triggered and the endpoint is not inadvertently removed from the network.
From CLI output
SW03#sh auth sessions int fa0/4
Interface: FastEthernet0/4
MAC Address: xxxx.xxxx.5289
IP Address: 10.10.10.64
User-Name: XX-XX-XX-XX-52-89
Status: Authz Success
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
Session timeout: N/A
Idle timeout: 300s (server), Remaining: 2s
Common Session ID: 0A17BD07000000A925152A7B
Acct Session ID: 0x00000458
Handle: 0x090000A9
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
SW03#
SW03#
SW03#
SW03#sh auth sessions int fa0/4
Interface: FastEthernet0/4
MAC Address: Unknown
IP Address: Unknown
Status: Running
Domain: UNKNOWN
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A17BD07000000AA251A0019
Acct Session ID: 0x00000462
Handle: 0x800000AA
Runnable methods list:
Method State
dot1x Running
mab Not runHere is the port config.
Just to clarify, everything is working except that the terminal is losing the authentication. The terminal works again if traffic is initiated from the terminals menu, like with ping.
interface FastEthernet0/4
description Standard
switchport access vlan xxx
switchport mode access
switchport block unicast
switchport voice vlan xxx
switchport port-security maximum 2
switchport port-security
switchport port-security aging time 5
switchport port-security violation restrict
priority-queue out
authentication control-direction in
authentication event fail action next-method
authentication event server dead action reinitialize vlan xxx
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
authentication violation restrict
mab
no snmp trap link-status
dot1x pae authenticator
dot1x timeout tx-period 5
storm-control broadcast level pps 100
storm-control multicast level pps 100
storm-control action trap
spanning-tree portfast
service-policy input users -
CUIC, Handled Calls and Handled Time problem
Hello,
Our costumer uses Outboud Predictive Dialer, UCCE. Everthing works fine but in CUIC reports we do not have almost any information about Handled calls and Handled Time (example in attach).
Any hints are much appreciated!
DusanHi,
alright.
One day you will outgrow CUIC anyway, so if I were you I would start thinking about creating a custom reporting solution (if you are a Microsoft shop, it's SRSS, if Java, then perhaps BIRT).
G. -
Find My iPhone and incorrect time problem
I just tried out the Find My iPhone feature on iCloud (Mac Mini) and played a sound on my iPhone just to see if it worked, which it did. My query is I immediately got an email from Apple to say a sound was played on my iPhone but the time was totally incorrect. I played the sound at 1830 hours but the email said it was played at 1030 hours (8 hours earlier).
The time on my iPhone and Mac Mini are both correct. How do I make the Find My iPhone display the correct time?
Thank you.That's about right, 8 hours from California time. Check your preferences for this site
And see what your timezone is set to: -
Hello. As a film project, I am creating an "Epic Rap Battle of History", a parody video of a popular series on YouTube. In my film/video, I would like to use compositing so that there will be two of one character in one shot. I have used Premiere Pro CC for the main character sequences, but when I imported this project in After Effects, there was no audio at all from the song, and the canvas displaying the composition was moving very slowly, at about 50% of the video's actual speed. Also, in the top right corner, it says, "Not Real Time", and displays something like 7.39/29.96. I have looked at different web pages, and nothing seems to work.
I would appreciate it if someone could explain how to fix this all up for me, or especially if someone who has had experience creating an Epic Rap Battle could actually list a step-by-step process on how to create one.
If this helps, I am a beginner to Adobe, and work on a iMac tower. Thank you for your feedback.Start here to learn After Effects: http://adobe.ly/AE_basics
-
Time Zone and WLS6SP1 and date time problem
Hi,
We are having our development WebLogic server on a Solaris 2.8 machine. The time
zone of that machine is GMT+5
How ever when we start weblogic in the telnet console, we see this
LD_LIBRARY_PATH=.......
<Jul 5, 2001 1:19:46 AM GMT-05:00> <Info> <Security> <Getting boot password from
user.>
Enter password to boot WebLogic server:
It shows the time as GMT-5.
All our application client machines are at GMT+5.30.So when we update from our
application, the datetime fields go as one day lesser(we have our own serializable
component which does the updating). If i enter Dec 10 2000 in our applet client
and try updating, it goes as Dec 9 2000 into the database.
We tried on a NT machine which had GMT+5.30 as the time zone and it showed GMT+5.30
while starting weblogic. And the dates are updated properly.
Does WLS on Solaris take the timezone,etc from some other place?
Is there any workaround for this?
Thanks in Advance,
RamkumarWe had the same thing using ReflectionX to connect. Users connection with Telnet
caused weblogic to log with the default timezone ( which included the effects of
daylight savings time ), while those users who connected with Rexec caused weblogic
to use GMT in its logging. This was with weblogic 6.0 sp2
"Joe" <[email protected].spam.com> wrote:
>
How are you starting up your server? We had a similar situation at our
site, and
it was due to the fact that we were using exceed to log into our sun box.
Exceed
was grabbing the users timezone info off of his/her local windows box.
is this what is happening for you?
"Ramkumar" <[email protected]> wrote:
Hi,
We are having our development WebLogic server on a Solaris 2.8 machine.
The time
zone of that machine is GMT+5
How ever when we start weblogic in the telnet console, we see this
LD_LIBRARY_PATH=.......
<Jul 5, 2001 1:19:46 AM GMT-05:00> <Info> <Security> <Getting boot password
from
user.>
Enter password to boot WebLogic server:
It shows the time as GMT-5.
All our application client machines are at GMT+5.30.So when we update
from our
application, the datetime fields go as one day lesser(we have our own
serializable
component which does the updating). If i enter Dec 10 2000 in our applet
client
and try updating, it goes as Dec 9 2000 into the database.
We tried on a NT machine which had GMT+5.30 as the time zone and it
showed GMT+5.30
while starting weblogic. And the dates are updated properly.
Does WLS on Solaris take the timezone,etc from some other place?
Is there any workaround for this?
Thanks in Advance,
Ramkumar -
When I try and Share (export) a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching their heads.
Okay, after several hours on the phone w/ Apple Care includiing nearly 10 hours on Wednesday, we finally figured out why I would get a Quicktime Error -50 when I tried to share a project out of FCP X. The problem was in the music track that I had in the project. I ripped a track from an audio CD, put in my iTunes then imported into the FCP timeline just as Apple says to do.
The problem is; iTunes default rippping codec is AAC. FCPX can't handle AAC compression. I had to re-rip the audio CD to a uncomressed AIFF file, bring that back into my project and then FCPX could share the file and do it's own copression.
This was a new discovery for Apple and FCPX. -
Hello,
I'm very frustrated. I need to delete photos from my iphone to increase the storage so I can update the operating system. Since first using the phone I bought extra iCloud storage and ensured the photo streaming button for the iCloud was turned on.
Unfortunately it seems to have a mind of its own and will download and share some photos but the majority have not been downloaded.
I've resorted to manually putting them on photo stream (the one you share with friends) so the photos will be on my iPad. It also takes ages for my iphone to put them on the photo stream. It's downloaded one album x3 ..??!!? I've tried deleting the duplicated photos but it's now frozen on me....
I haven't dared delete the photos from my camera roll in case I loose them all and I'm therefore stuck in the situation of being unable to download the new operating system or take anymore photos/download music/apps. It *****!
Please Help!
Are there any other options for me to be able to download my photos when I don't have a computer/laptop? Is there a permanent online storage option I can use?
Thanks
BeckyAmazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini -
I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.
Have a look here > http://support.apple.com/kb/TS1646
-
I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.
Contact App Store support. They're the folks who can help with Account issues.
Regards
TD -
Problem with DAQmx and Real Time PCI-7041/6040E.
Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM -
I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks
You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
Cheers, Tom -
family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
My daughter shares my apple id on her ipod touch. i recently got an i pad and now i'm getting all of her instant messages and face time calls. Is there a way to change her contact information for those two areas so i don't get them on my i pad but keep the same apple id for purchases? Thank you
See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
Maybe you are looking for
-
Swing Timer issues on a faster machine.
Hi everyone, I'm having some trouble using Swing Timers. I have built a system which uses three javax.swing.Timers, these are as follows: timerLeft = new Timer(timerDelay, new ActionListener() { public void actionPerformed(ActionEvent evt) {if(pathPo
-
Bad wifi performanc​e
I am having an issue with my wifi. I somehow have horrible wifi reception (sometimes I cannot connect like 3-5 metres away. Are there any possible soultions as I have also discussed this on crackberry and yet to find a solution that works. I've tried
-
Screen recording - recording part of the screen or low resolution
I want to record part of the screen in quick time x, has anybody found a way to do this? As a work-around, I tried reducing the screen resolution to 640x480 or 800x600 but the recorder doesn't seem to pick anything up at this resolution. After record
-
OESB File Adapter (Read .xml file to Write .xml)
Hi All, The fileRead adapter of reading xml format file not writing the content to another xml file. In detail, I have a xml file of type (myschema.xsd) to pick using read operation will transform to output directory as xml format (pls find attachmen
-
How to Get Contribute CS4 to Update Available Styles when CSS is Updated
I am using a style sheet on my website. I recently updated the style sheet, adding a new style, in Dreamweaver. When I go into Contribute, the style is not showing up. How can I force Contribute to get the updated data from the latest version of t