Pearl 8120 failing to load University's web based security page

I have a 8120 Blackberry pearl and it is connecting to the wireless and receiving an IP address however it won't redirect to the web based security screen that is used to log on. I tried the IT guys on campus but they were clueless.
Can Anyone Help?

You don't happen to go to Texas A&M do you? I tried to do this same thing on our campus (connect to VPN) and it doesn't work. The help desk central guys said they have recieved several emails recently regarding connecting new Blackberries (apparently 8120's or 8830's) to the network, and they couldn't get it to work. They believed it was a disagreement between the software and the network. I feel the same thing because I can see the network, I enter my password and username and try to connect, but it doesn't want to work for some reason. It says connection failed for some reason. If you find anything out just reply back to this. If I find anything out, I will also reply back, or maybe start a new thread. Jay
UPDATE: Okay, looked up a few things....this may alleviate the problem. Instead of connecting via the WiFi screen as usual, you may have to connect via the VPN screen. To get to this, go to Settings>Options>Security Options>VPN>Log In.
I haven't tried this yet, but I will soon to see if it works. There has got to be a way to get this thing to connect, I just don't know how to yet. More tomorrow...
Message Edited by jay47 on 09-15-2008 11:44 AM

Similar Messages

Export Release Build Flash Builder 4.5 fails to load over the web.

Exported Release Build Application fails to load over the web. You can reproduce using the following steps:
1. Create New Flex Project in Trial Flash Builder 4.5.
2. Use the default Flex 4.5 sdk.
3. Configure as a web application.
3. Place the following MXML code in the main application file:
<?xml version = "1.0" encoding = "utf-8"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark"
xmlns:mx = "library://ns.adobe.com/flex/mx"
minWidth = "955"
minHeight = "600">
<fx:Declarations>

</fx:Declarations>
<s:TextArea text = "Hello World!" width = "100%" height = "100%">
</s:TextArea>
</s:Application>
3. Save the main application file and Export Release Build to bin-release.
4. Place all files in bin-release on IIS web server in a web accessible location.
5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
Actual Results:
Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
Expected Results:
Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
Workaround (if any):
Deploy on an Apache web server.
The tests were run on IIS 7.x (7.0 for one, and 7.5)
Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
Flash Player 10.3.181.14
Example failing website:
http://staging.ibenergy.com/Test.html
Any idea as to why my exported release build fails? Any help would be appreciated.

Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
The URL you mentioned gives me a 403 forbidden error.
-Anirudh

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page.
I have tried everything posted to the forums and the Knowledge Base for several weeks now with no luck. I can power push router and gain access to router's web-base interface but only for a few minutes than it quits loading part way through and or does not load at all. If I turn off the wireless side I can access the router at will with no problems. My warranty is almost over. I am at my wits end. I would like to get it replaced under warranty if I can. (^8
Solved!
Go to Solution.

Thank you for your recommendations peanuts. (^8
I bought the router back in December 10, 2006.
I updated the firmware to v1.00.20 back in June 2007. After I did a successful firmware upgrade I reset the router to factory default settings and then reconfigured it. It has worked Ok till a couple of months ago.
I have read everything I can find here on the support forum and in the Knowledge Base several times.
I have tried changing all the different settings to the different recommendations posted here and in Knowledge Base with no success. Each time I would do a long reset back to factory defaults, let it soak for a few hours and then make one change at a time and let it soak.
I have been monitoring 6 other wireless AP(s) around me (none mine) for a couple of months too. None of them are strong enough to connect to. My SSID is different from them. I have tried all the channels. My router is passworded and MAC'd.
It is looking like it is time to call support and try to get a replacement under warranty while it is still in affect.

Error in router's web-based setup page (WRT54G V5)

Hi,
My router’s web-based setup page is unable to load fully.
There seems to be an error with some document.setup.save file.
I have tried to reset my router but the router’s web-based setup page is still unable to load fully.
Please help.
Thanks.

Try Internet Explorer, it usually works.
JavaScript must be enabled.
Temporarily turn off your computer's software firewall, and see if that corrects your problem.
Hope this helps.

WPA Security, Crashing OS, Locked out of Web-Based Setup Page. AAAaaarrrrrrgggg!

I tried several times to enable WPA security on my WMP54GS router by using the "Secure Easy Setup" button in the Wireless Network Monitor Panel. I pressed the lighted Cisco logo on the router as directed, I clicked on the "next" button on screen, and Windows crashed. (That is, my system rebooted and Windows reported that it had recovered from a serious error.) I am running XP. I also tried to enable security using the router’s web-based setup page. I followed the instructions, and a new web screen appeared stating "error on page." I tried again to enable security using the web-based setup page, but now it won't let me in using the default password (admin). I tried resetting the router by pressing the reset button for 30 seconds, but I still cannot access the web-based setup page. Sooooooo, I'm out of ideas. Can anyone help?
Thanks.

Hi
When configuring your wireless settings, use a wired computer and not a wireless computer. Because it will not be able to apply the new settings. Its like trying to troubleshoot a automobile malfunction while you are driving the car itself.
Just helping out...
"Success usually comes to those who are too busy looking for it"

Can not login to my EA4500 router's web based setup page

Hello All-I have a EA4500 router. I attempted to login to my router' web based setup page late last year using my IE11 browser.I received an error message stating that I cannot login with that browser. I need an updated IE,Google Chrome or Mozilla Firefox to be able to visit that site. I attempted about 3 more times and received the same error message. I switched to Google Chrome that worked very well up to tonight(3/31/2004). Cisco web page is preventing me from opening my setup page. I believe I should be contacting Customer Support about this problem but none of their support options cover this problem. Thanks in advance.

IE 11 isn't compatible. Use Google Chrome if you don't want to uninstall IE 11 and go back to IE 10.
You can force the local login by disconnecting the cable from the router's internet port and then logging in.
If the Smart Wifi is giving you trouble and you don't mind reconfiguring your router. Then you could disable Smart Wifi services.
To disable Smart Wifi Services:
Reset the router to factory defaults (recessed button for 30 seconds or through the router UI)
For setup choose "I want to skip Setup and configure my router manually"
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Web based admin pages broken on Mac?

Have new WRT54GL v 1.1, 4.30.7 firmware.
I have noticed intermittent problems with the web-based admin pages, using both Firefox and Safari on the Mac. Odd bit is these don't happen all the time and I'm not sure yet what triggers the problems.
Most commonly seen in Firefox: On the page for basic wireless settings, drop-down menu for selecting the channel will not work. It will display the currently selected channel, but clicking on the menu will either not drop down at all, or it will drop down briefly with no channel selections visible.
In Safari: Many of the drop-down titles and item will shows the intended text prefixed with the word "Capture" or bracketed in "Capture(itemName)." I've seen a few variations on this. Also, many item titles and text are simply missing from many of the pages when viewed in Safari.
Questions (some rhetorical, some practical):
* Anybody else seen these or similar problems?
* Known solutions/work-arounds?
* Does this happen with any browsers on the PC?
* Is there something fundamentally wrong with how WRT54GL's scripting builds these user interface items - or is the problem more related to how the Mac browser handles the rendering?
-Lee

I don't have any problems with this firmware on my WRT54Gv2 using MacOS or Windows and any browser I have.
Those problems are usually either cache problems, i.e. there are some incomplete files in the browser cache.
Could be disabled JavaScript. (It is worth to check the JavaScript error log to see if there is problem)
Could be a hardware/memory problem. Sometimes this happens after a firmware upgrade which did not correctly go through. A re-flash of the same firmware could help then.
The Safari texts you see are normal. There JavaScript works a little different. I have the same on mine. (but I must admit I cannot tell you if I can configure the router with Safari as I have never tried it so far. I usually use only Firefox.)
You can try a PC and see if it is the same there. I guess it is.
Anyway, you are not alone with this problem. I would try to clear the cache, if that makes no difference, download the 4.30.7 firmware and re-flash the router. If that still makes no difference return it to the store if you can and get a replacement. You could ask them to hook it up there to a computer to see if it is any better there...

Web based setup page is blank

wrt54g wireless router
when i go to 192.168.1.1 and log in as admin,(all fine to this point), BUT THEN, when the web based page comes up, no words on pge, can not make selections. PLEASE HELP, what do i do. have tried using start up disk but no help.

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Converting a web-based text page to XMP

I have a live, web-based text feed that contains all of the metadata I want to capture. I want to tag this metadata to video and image files, and I want that information to stay with the video and image files throughout the production process (ie. the metadata information should be available in transcoded copies of the video files and so on).
I'd also like to use this metadata to create data-driven graphics in Photoshop. At this stage I can get basic datasets working in PS, but I have to cut-and-paste the info from some cells into a .csv file first. Ideally I'd like to eliminate this manual step as it introduces the possibility of human error, which is what I'm trying to eliminate in the first place.
Photoshop can't read the whole text file as a dataset because I think it's in an array (I'm not sure, I don't get it), and from my understanding datasets will only work with .csv files.
It should be a relatively simple process to grab information from a live, web-based text feed and convert it to useable metadata, but I find the XMP SDK completely indecipherable. Apologies for my ignorance but I have no coding experience whatsoever and it seems like it's written in an alien language. Can someone please offer some advice as to how I go about this? Attached is a copy of the text file I'm trying to use.
Thanks to anyone with enough smarts or nerd power to crack it... it's beyone me, I've wasted weeks staring at a blank page and I'm more confused now than when I started.

Hi,
what you are planning to do seems technicaly possible with our XMP C++ SDK. But you really need programming skills in C/C++ to realize this project.
Regards,
Samy

Need access the E1000's web-based setup page.

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?
Solved!
Go to Solution.

Yes, there is. You'll have to reset the router back to defaults, which will reset the password back to the default password for your router. Unfortunately , you'll also have to reconfigure the settings, since all settings go back to factory default. Just hold press the recessed "reset" button for your router for about 30 seconds, then release it. After the router has re-initialized itself, you'll be able to log in to the web GUI again with the default password.

Pearl 8120 - failing syncronisation with Outlook...

Hello,
Since a few days I have my new BB 8120, unfortunately I can’t set up the mobile…especially with the first synchronisation and my otlook data like adresses and meetings.
Each time DM wants to connect with the internet. I should verify my internet connection for synchronisation setting.... But I am in the net and DM recognises my device. Unfortunately just the synchronisation with outlook doesn't work....
I am using an DM 4.7 (no automatic update), USB cable and PC with XP. Actually I haven’t installed any firewall or antivir to allow a synchronisation, moreover I tried DM 5.0 and other PC's... It's always the same ....
I need the synchronisation for the sync with my outlook data’s, the most important feature for me!
Does anybody you have an idea! Would really great, if you could help me….

Hi and Welcome to the Forums!
Here is a KB that discusses that error.
I can't tell, from your post, exactly what you have already tried. Hopefully something will be useful.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Load Balancer and Web Dispatcher "keepalive page"

I would like our monitoring and load balancer to be able to perform http status check against SAP web dispatchers.
Is there a built in "keepalive" page that can be queried within Web Dispatcher, or will a URL rule be needed?

Dear Andrew,
We need to provide access to our intranet to some outside companies for them to also use some of our portal applications. As per your answer, I understand that I can configure Web Disptacher to talk to the Cisco Load Balancer of our portal. In this case Web Dispatcher will work just as a reverse proxy. But when I discussed this with one of our basis resource, he told me that when we install and configure Web Dispatcher, it always ask for the Message Server URL and Port number, even if I just want to use Web Dispatcher as a Reverse Proxy. If his concerns are valid, I do not think I will be able to configure Web Dispatcher to access the cisco Load Balancer because I cannot put Cisco load banacer URL and port instead of the Message Server URL and Post Number. Can you kindly share your comment on the same?
Now the second part of my question, if Web Dispatcher cannot be configured to talk to Load Balancer(as mentioned by our basis resource), I will have to use two load balancers. One web Dispatcher in DMZ as a Load Balancer *** Reverse Proxy for the external users. Second the internal Cisco Load Balancer for the intranet users. So the same portal will be accessed by two load balancers. My question here is, in this set up, can the portal work efficieintly here by distributing equal loads two both the server instances?
Thank You,
mansooralip1

Charter web based email page does not load interface, chrome does

Charter support says the page uses flash and java. I have tried updating everything. reloading everything. chrome and IE both load it normally.
It worked yesterday. Today, it doesn't work.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Unable to access the Router's Web-Based Setup Page

Hey, I found a little problem when I tried to change the configurartions to my Linksys WRT54GS ver- 6.0 router. Problem is that I can not acces to setup, nor can I connect to Internet trough wire. Can somebody help me with my problem?
Pasi

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Pearl 8120 failing to load University's web based security page

Similar Messages

Maybe you are looking for