"PENDING" Status in PROCESSING_STATUS_CODE field RCV_TRANSACTIONS_INTERFACE

Iam Working in R12 Instance,I created Purchase Order and it was apporved,now iam working in RCV_TRANSACTION. iam having data in rcv_headers_interface and rcv_transaction_interface as follows
rcv_headers_interface
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID, processing_status_code, receipt_source_code,
transaction_type, auto_transact_code, test_flag,
last_update_date, last_updated_by, creation_date,
created_by, expected_receipt_date, comments,
validation_flag, transaction_date, org_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL, 'BATCH', 'VENDOR',
'RECEIVE', NULL, 'N',
SYSDATE, fnd_global.user_id, SYSDATE,
fnd_global.user_id, SYSDATE, 'test',
'Y', SYSDATE, 204
rcv_transactions_interface
in below table i inserted two rows with different po_line_id,po_location_id,po_distribution_id
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id, processing_status_code,
transaction_date, GROUP_ID, last_update_date,
last_updated_by, creation_date, created_by, transaction_type,
processing_mode_code, transaction_status_code, quantity,
to_organization_id, source_document_code, po_header_id,
po_line_id, po_line_location_id, po_distribution_id, comments
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL, 'PENDING',
SYSDATE, rcv_interface_groups_s.CURRVAL, SYSDATE,
fnd_global.user_id, SYSDATE, fnd_global.user_id, 'RECIEVE',
'BATCH', 'PENDING', 1,
207, 'VENDOR', 81203,
102032, 193877, 199240, 'TEST'
and i run the "Receiving Transaction Processor",It completed with Normal Status,but in base tables data was not inserted,i got "ERROR" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table and in rcv_interface_error iam getting "Error: Default Operating Unit has not been defined for the Org . (OU=)" in error_message field and "RCV_NOT_IN_ORG" in error_message_name field. and i assign responsibility level operating unit after that concurrent program completed normally and iam getting
"PENDING" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table,why its is having pending status,weather i having to run any workflow,
Edited by: user8114609 on Apr 19, 2010 9:46 PM

Hi Jyoti,
Actually value is not set for "MO_SECURITY_PROFILE",so i tried to set the value at responisibility level,now in working in "vision operaions" opeating unit but in the list its is not coming,only vision "operations-supplier management" only coming.,weather its a setup program, please guide me this
Thank u for ur help
regards,
Viji

Similar Messages

Database msdb cannot be opened due to inaccessible files or insufficient memory or disk space - in recovery pending status

came in this fine monday morning and it looks like developers were running some kind of trace that filled the primary DATA folder with about 80,000 5mb trace files. now that process has stopped and the logfiles have been cleaned up, but when attempting to connect to the server using the management console i get the error:
Database 'msdb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (.Net SqlClient Data Provider)
when i check the status it is in recovery pending mode. i have a backup from yesterday but im not sure if this database became corrupt before that backup or not because this process was ongoing over the weekend. the last timestamp on the msdb and log files is 7am this morning..
I am not sure how to proceed recovering the msdb database with limiting interruption to the users. any advice is extremely appreciated. this is sql server 2008. i can login via sqlcmd and see it is in recovery pending status:
1> select state_desc databasestatus_sysdtabase from
2> sys.databases where name ='msdb'
3> go
select state_desc databasestatus_sysdtabase from
sys.databases where name ='msdb'
databasestatus_sysdtabase
RECOVERY_PENDING
(1 rows affected)
1>

For someone experiencing a similar problem this answer is unacceptable. You're basically telling me to reboot the server to fix this. You vaguely mention using process explorer to find out who is using the file. Can you please provide
some more information on that? I have a similar problem and rebooting the server to fix it is not an option. This problem keeps reoccurring.
OS Error 32 means file has an open handle by someone else. If that is a user process then you can catch it via Process Explorer. If it's a kernel mode object then it's difficult to catch that and restart is the only choice.
http://sqlserver-help.com/2014/08/07/tips-and-tricks-os-error-32the-process-cannot-access-the-file-because-it-is-being-used-by-another-process/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Payment pending status

Hi there,
I wanted to order a skype number but I have problem while processing to pay. Then I tried again and again by choosing new number but I didn't noticed that that it reserved the number and each time I failed, the payment status changed to pending. I only know that when I check my payment history. Now I can fix my problems and want to process to pay for only one number. And my question is if it will process to pay for 3 number for my account and will it charge me for 3 number? I don't need 3, I only need one. Can anyone show me how to delete my pending status.?
Thanks.

Hi, Bigtone13, and welcome to the Community,
Payment processing matters must be resolved by Skype Customer Service. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As you know you wish to contact Customer Service, skip past Step 2 of the instruction and proceed to Step 3, Continue Support Request. You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started!
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Sending message while order get Pending Status

Hi,
We r using status profile for releasing order. If order fails the condition, it remains in the Pending Status. So we need to send these order to Sales Rep for review. How to send email to Sales Rep?

Hello
Create 'Z' Report and [send that report by mail|http://www.sap-img.com/fu016.htm]
Thanks & Regards
JP

I want to cancel all pending status in my payment

I want to cancel all pending status in my payment

please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

OEM10g with pending status

Hi,
I've recreated EM, I've deleted all manually before, because drop or recreate command hangs in "Getting temp tablespace". It is 10.2.0.1.0 in Centos. I've deleted sysman user, and so on ... I've created EM again and it is ok, but when I go to the url, I enter with sys user and it shows "Pending Status".
I've searched in google, people speaks about tzregion in emd.properties, but it is ok ...
When I do emctl status dbconsole, it shows that it is running, and if I do the same for agent, it shows running and ready.
Can someone help me? Thanks beforehand.

Hi
What u can do login with ID who make approval
Then
Administrator > Approval procedure > Approval Status Report
Check Mark only Pending
So will display all transaction which are in Suspend Mode
Right click and choose cancel.
That will no further carry in pending stage...
as per me there is no way to delete pending records....
Thanks
Kevin

Async call gets stuck with pending status

Hi,
I am working on Tasklayer where need to invoke Async. call, the .bpel file has Invoke activity and below that it has pick activity with branches one for OnMessage and another is also OnMessage but, this is for fault. Now, when it invokes the Async. what i see in the instance is that the OnMessage activity gets stuck in Pending status, it doesn't proceed further. Kindly let me know if any one has faced similar issue.
Thanks & Regards,
Sanjay

Hi Sanjay,
you are saying that u r calling an asyc process.
So as an async process do not send the response back to parent through same port, you have to send the fault back to parent by invoking it(parent).
Here you can send the fault by using existing callback port otherwise you can define separate port for fault can send through that(you have to do it in WSDL).
So here for the first case no need to have the pick as u r getting both success and fault through same port. If you are going for separate one you have to have pick(one for success and other for faulted one)
So as Steven said you have to have a catch and invoke to send the fault back to parent.
Regards
PavanKumar.M

Po Requisition workflow pending status issue

Hi
We have updated some quantity from 200 to 250 for a requisition line and sent for approval,at this time the user who updated the qty did not have the email address in oracle user name.So requistion status is always showing as pending.We have updated the oracle User with email address and ran Sync WF local tables concurrent program.
But we still could see requisition line in pending status.
Could anyone please tell me how to restart the requistion or any other solution to solve the issue.
Our apps version is 11.5.10.2
Thanks

Hi user;
please follow below and see its helpful:
Stuck POAPPRV Workflow Records At The Email PO Process Activity [ID 417722.1]
View Approval Workflow Hangs With No Error for Approved Purchase Orders and Requisitions [ID 413272.1]
APPROVE PO, WORKFLOW PROCESS, PROCESS HANGS [ID 1056081.6]
Workflow Is Not Completing For PO Supplier Change [ID 554024.1]
Regard
Helios

How to see all the PO payment status with searching field project defin.

Dear all experts,
could you help me on the following issue?
In a large capital project, there are many POs, and all the POs are paid partially
for example, down payment 30%, 30% when the machine is received, 30% when the machine is commissioned, 10% is for warranty after a year.
how can i see the all the POs payment status with searching field project definition. for example, i have paid how much for which PO. i want to see the list by searching the project definition.
is it possible to achieve? or how can i do it?
Please share your opinion or give me some suggestions.
thanks a lot.
Judy

thanks for all of your replies.
i have activated FM. and i have a PO triggered by the project.
i enter the down payment for the PO using F-48.
i can see the down payment in the PO history.
but i can not see it using the committment item report, such as CJIA
is it correct or not? do i need to change something?
thanks a lot.
Judy

Users sent items in pending status

All users on a certain post office periodically have their sent items get stuck in pending status. I researched this and found the following:
I noticed the Domain where the post office resides which is on our 8.0.3 MTA keeps closing
The post office resides on a SLES 11 box.
I have to go in and stop the post office rcgrpwise stop and restart the post office rcgrpwise start
I have done and rebuild on the post office and MTA, issue is still happening
Any idea on why this keeps happening and how to fix? Thank you
This is the only Post Office on that domain that is having this issue.

Couple other things to note:
1. On occasion when I try to putty to the server hosting the post office I get connection errors
2. When using a browser to log into the server using http we get the following error "Network Error:Connection reset by peer:socket write error

No Pending status on IM's.

Since an "upgrade" is appears that both Mac & Windows users no longer get a "Pending wheel" when sending IM's to someone who is offline. (Windows Topic: http://community.skype.com/t5/Windows-desktop-client/No-pending-logo-for-IMS/m-p/2366625/highlight/true#M212617) No longer showing the Pending, is simply NOT GOOD ENOUGH. It's hardly rocket science to write some code to KEEP the PENDING status AND still send the message once the user is online again, whether I am or not. This is a ridiculous "upgrade" and I sincerely hope that the Skype Dev Team acknowledge that they dropped the ball on this important feature and reinstate it as a "bug fix" asap. Conversations with my nearest and dearest have been complicated because if this unannounced and infuriating change. I already know from having discussed it with a few other Skype users that they're also finding it impossible to understand WHY this upgrade has removed an ESSENTIAL feature of Skype Instant Messaging. Please reinstate it asap.

Second. I acquired this problem starting with the forced upgrade, which consisted of the Skype server refusing to log in my favourite old version of Skype without explaining why. Eventually I found the reason, so I installed new Skype... only to lose the “pending” notification. Not only that, now some users appear permanently “online” even though their devices are switched off. Coupled with the lost “pending” notification, now I can’t see anymore when they are alive or not. Without a deliberate response from them, I can't see whether they are offline or simply not ready to respond. Huge difference. I’m very sad that our messages are now synced behind our backs. The Internet user has less and less control over their digital life: no feature, no function can be taken for granted, as they may lose it any day. Sad to see that nobody cares. I’m feeling very lonely in the 6-billion-people world right now. Nobody wants things that I want. Nobody even wants to join me in crying. Time... to die... “Today’s Big Brother is not about keeping people in and making them stick to the line, but about kicking people out and making sure that when they are kicked out that they will duly go and won’t come back…”
~ Zygmunt Bauman: “Liquid Fear” (2006). Cambridge: Polity Press.

Indexing Pending Status

Hello All ,
Indexing is always showing pending status for the document.
Need to specify any property for this?
Regards,
Art

Hi Art Tech ,
You can see the topic for Cache Monitor with the parameters:
http://help.sap.com/saphelp_nw04s/helpdata/en/70/795647ef46bb4185afc32920cee1a0/frameset.htm
You can see the topic for Content Management System with the parameters:
http://help.sap.com/saphelp_nw70/helpdata/en/1f/2df44eeebf8145b67b31f513a83fc5/frameset.htm
More information about Indexing Pending Status you can search in KM Administration Guide :
http://help.sap.com/saphelp_nw70/helpdata/en/ec/171e3e7181b60ae10000000a114084/frameset.htm
Regards,
Lubi

Indexes in 'Pending' status...

Hi all,
we are facing problem with our TREX 7.0. I created two indexes with relevant data assigned to them and clicked on 'Reindex' (with standard crawler set) but both of them are stuck in 'Pending' status with no files processed even several hours after.
Might this have anything to do with access rights to the system TREX is runnig on? (separate from the box where portal is running) Where can I get some more information regarding what is happening behind all that. I suppose something must have happend...
Any help/advice will be very much appreciated.
Regards,
Frank

Bingo! Good job my friend!
Full points for you!
Regards,
Frank

In which transaction can I change the status of a field?

Hi,
In which transaction can I change the status of a field?
In transaction FB75 (enter customer credit memo) on the Details TAB, the G/L account is defaulted.
How can I change this field, so that I can enter a new G/L account?
Thank you for your feeback.
Kind regards,
Linda

hi Linda,
this is the reconciliation account of the customer. As another commenter already pointed out, you can change this in the master data of the customer (tcode FD02, Company code data).
From Release 4.7 (and up) there is another option: in the master data of this G/L account you can set up, if you can change this G/L by posting. This is a checkbox in the G/L master data (tcode FS00). If you tick it, you'll be able to change this reconciliation account it in FB75 (and elswhere by customer postings).
"I see that in transaction Fd02, the reconc. account is also grey (cannot be changed)."
You have to check the field status settings in SPRO!
hope this helps
ec

How long a wait in "Product Return Pending" status?

I finally sent back my MBP 2.0 week 15 for service (whine, heat, etc.). The repair seems to have gone quickly, as per Apple's support page, but it is now stuck in "Product Return Pending" status for the last three days. Those of you that sent it in for repair, how long did you waited in the "Product Return Pending" status? Is it possible it has not been updated but it is on its way?

I sent it straight to Apple, not through the stores. I just hung up with AppleCare and, well, they were not able to explain why if it was already set as if the repair was completed, it was still "open". The explanation they gave me is that they were re-checking the unit, and could not confirm a shipping date. hmmmm. They did tell me the logic board and inverter (which was not mentioned in the original call) were replaced (three days ago).
I don't mind if Apple re-checks my unit and holds it a little bit longer. That's fine with me. As long as it comes back ok... but, I would appreciate some information as to when I should be in to receive it.
Thanks all for your quick responses...

"PENDING" Status in PROCESSING_STATUS_CODE field RCV_TRANSACTIONS_INTERFACE

Similar Messages

Maybe you are looking for