People Search without My Sites

Hi,
We are building our corporate intranet and trying to implement people search in our SharePoint 2013 Enterprise edition environment. The environment has been updated up to August CU and I am implementing host-named site collections. The challenge faced is
that we don’t want to implement My Sites at this point. However all reading material points to having My Sites to implement people search. I have set up the User Profile service and imported users from Active Directory. All I want is to be able to search the
User Profiles and display results. Is there any other option besides implementing My Sites? Would setting up the My Site host collection without actually setting up My Sites do the trick?
Thanks for your help in advance.
Mera

You need to setup a MySites host in order to take advantage of profiles.  You do not need to have mysites enabled for people search to work.  If you're worried about MySites being enabled you can keep self site creation turned off and turn off
the social features.
MCITP-EA | "Never test how deep the water is with both feet"

Similar Messages

  • User has been deleted from UPS, however its getting display in People Search in search site - why ?

    Hello,
    I have deleted user into UPS, however its still being display in people search.
    I believe search crawl will delete the information from people search - However I am not sure whether its correct approach to run delete information from people search.
    If user is not available in UPS then why user's information is being display in site ? and by when it may delete automatically?
    Thanks and Regards,
    Dipti Chhatrapati

    Hello Both, Thank you for your response !
    Kindly consider following points where I am confusing.
    Incremental Crawl is scheduled every 30 minutes - I have rechecked after 15 hours of deleting the user and still this user is available in People search.Few days back I ran the incremental crawl manually in order to delete the users from
    people search that has worked - that means - incremental scheduler is not working as per the expectation ???
    Full Crawl is scheduled on weekly basis - so user information will be deleted automatically when full increment will run next time ? 
    Also, there is My site clean up job that keeps user data for 14 days even though user has been deleted from UPS.that means user information will be deleted only after 14 days of deleting user from UPS ?
    It will be much appreciated if this will be clear from my head !!!
    Note: UPS doesn't sync disabled account since it has been specified in connection filter.
    Thanks and Kind Regards,
    Dipti Chhatrapati

  • Why have my bookmarks been turned into Bing Searches for those sites? Why do I get a Bing Search when I manually type in the address?

    Ever since I installed FireFox 4, I seem to have lost the function of my bookmarks. They simply open up Bing Searches for those sites. I don't even like Bing, why does it keep getting installed into my Firefox?
    When I type in the address manually into the address bar (NOT the search bar), I get a Bing Search for the address as well.

    I think an add-on has hijacked your browser. If this started with Firefox 4, are you sure you installed the official package from http://www.mozilla.com/ ?
    In past threads similar to this, people mentioned a Zugo Search Bar, but I haven't dug into it deeply.
    First, make a backup of your Firefox settings for safekeeping: [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does running Firefox without add-ons fix it?
    If so, you could disable them all and then gradually restore the ones that are most valuable to you.
    If not, there might be some external software intercepting Firefox's communications.

  • SharePoint 2013 Search Display Template People Search Mobile Phone

    Hello,
    I'd like to customize the people search result page. I already added some custom profile properties without any problem. But, when adding the MobilePhone field nothing is display.
    I've created a new display template based on the "Item_Person.html" file. 
    Added the "MobilePhone" field in the ManagedPropertyMapping section
    <mso:ManagedPropertyMapping msdt:dt="string">&#39;WorkPhone&#39;:&#39;WorkPhone&#39;,&#39;MobilePhone&#39;:&#39;MobilePhone&#39;,&#39;Room&#39;:&#39;Room&#39;,&#39;Werkgebieden&#39;:&#39;Werkgebieden&#39;,&#39;AboutMe&#39;:&#39;AboutMe&#39;,&#39;AccountName&#39;:&#39;AccountName&#39;,&#39;BaseOfficeLocation&#39;:&#39;BaseOfficeLocation&#39;,&#39;Department&#39;:&#39;Department&#39;,&#39;HitHighlightedProperties&#39;:&#39;HitHighlightedProperties&#39;,&#39;Interests&#39;:&#39;Interests&#39;,&#39;JobTitle&#39;:&#39;JobTitle&#39;,&#39;LastModifiedTime&#39;:&#39;LastModifiedTime&#39;,&#39;Memberships&#39;:&#39;Memberships&#39;,&#39;PastProjects&#39;:&#39;PastProjects&#39;,&#39;Path&#39;:&#39;Path&#39;,&#39;PictureURL&#39;:&#39;PictureURL&#39;,&#39;PreferredName&#39;:&#39;PreferredName&#39;,&#39;Responsibilities&#39;:&#39;Responsibilities&#39;,&#39;Schools&#39;:&#39;Schools&#39;,&#39;ServiceApplicationID&#39;:&#39;ServiceApplicationID&#39;,&#39;SipAddress&#39;:&#39;SipAddress&#39;,&#39;Skills&#39;:&#39;Skills&#39;,&#39;UserProfile_GUID&#39;:&#39;UserProfile_GUID&#39;,&#39;WorkEmail&#39;:&#39;WorkEmail&#39;,&#39;WorkId&#39;:&#39;WorkId&#39;,&#39;YomiDisplayName&#39;:&#39;YomiDisplayName&#39;</mso:ManagedPropertyMapping>
    3. Added a variable:
    var has_MobilePhone = !$isEmptyString(ctx.CurrentItem.MobilePhone)
    4. Copied the "WorkPhone" display section and changed the values to MobilePhone
    <!--#_
    if(has_MobilePhone == true) {
    _#-->
    <div id="MobilePhoneField">
    <!--#_
    var encodedMobilePhone = ctx.CurrentItem.MobilePhone;
    var displayMobilePhone = Srch.U.getSingleHHXMLNodeValue(hhProps, "MobilePhone");
    if ($isEmptyString(displayMobilePhone)) { displayMobilePhone = encodedMobilePhone }
    _#-->
    <div id="MobilePhoneValue" class="ms-srch-ellipsis" title="_#= encodedMobilePhone =#_">MobilePhone: _#= displayMobilePhone =#_ </div>
    </div>
    <!--#_
    _#-->
    Unfortunally the mobilephone does not appear in my search results. 
    What did I missed?

    First of all thank you for this quick reply.
    I changed all the properties from MobilePhone to CellPhone, but without result.
    <mso:ManagedPropertyMapping msdt:dt="string">&#39;WorkPhone&#39;:&#39;WorkPhone&#39;,&#39;CellPhone&#39;:&#39;CellPhone&#39;,&#39;Room&#39;:&#39;Room&#39;,&#39;Werkgebieden&#39;:&#39;Werkgebieden&#39;,&#39;AboutMe&#39;:&#39;AboutMe&#39;,&#39;AccountName&#39;:&#39;AccountName&#39;,&#39;BaseOfficeLocation&#39;:&#39;BaseOfficeLocation&#39;,&#39;Department&#39;:&#39;Department&#39;,&#39;HitHighlightedProperties&#39;:&#39;HitHighlightedProperties&#39;,&#39;Interests&#39;:&#39;Interests&#39;,&#39;JobTitle&#39;:&#39;JobTitle&#39;,&#39;LastModifiedTime&#39;:&#39;LastModifiedTime&#39;,&#39;Memberships&#39;:&#39;Memberships&#39;,&#39;PastProjects&#39;:&#39;PastProjects&#39;,&#39;Path&#39;:&#39;Path&#39;,&#39;PictureURL&#39;:&#39;PictureURL&#39;,&#39;PreferredName&#39;:&#39;PreferredName&#39;,&#39;Responsibilities&#39;:&#39;Responsibilities&#39;,&#39;Schools&#39;:&#39;Schools&#39;,&#39;ServiceApplicationID&#39;:&#39;ServiceApplicationID&#39;,&#39;SipAddress&#39;:&#39;SipAddress&#39;,&#39;Skills&#39;:&#39;Skills&#39;,&#39;UserProfile_GUID&#39;:&#39;UserProfile_GUID&#39;,&#39;WorkEmail&#39;:&#39;WorkEmail&#39;,&#39;WorkId&#39;:&#39;WorkId&#39;,&#39;YomiDisplayName&#39;:&#39;YomiDisplayName&#39;</mso:ManagedPropertyMapping>
    var has_CellPhone = !$isEmptyString(ctx.CurrentItem.CellPhone)
    <!--#_
    if(has_CellPhone == true) {
    _#-->
    <div id="CellPhoneField">
    <!--#_
    var encodedCellPhone = ctx.CurrentItem.CellPhone;
    var displayCellPhone = Srch.U.getSingleHHXMLNodeValue(hhProps, "CellPhone");
    if ($isEmptyString(displayCellPhone)) { displayCellPhone = encodedCellPhone }
    _#-->
    <div id="CellPhoneValue" class="ms-srch-ellipsis" title="_#= encodedCellPhone =#_">CellPhone: _#= displayCellPhone =#_ </div>
    </div>
    <!--#_
    _#-->
    Can you please tell me what I need to change?

  • How to create a Display template for people search results

    Hi,
    I've just installed Sharepoint 2013 and started to play around with it. Seems to be many improvements - among these are the ability to create Display templates.
    On my publishing page there is a default "employee lookup" app which returns prefferred name, title and department as default when I try to search.
    I would love to return mobile number aswell so I have tried to do the following:
    I made a copy of Display _Catalogs/Masterpages/Display Templates/Search/Item_Person.html
    Edited that one with the following:
    1. Added 'MobilePhone':'MobilePhone' to the "Managed Property mapping" in the top of the html   document:
    <mso:ManagedPropertyMapping msdt:dt="string">'AboutMe':'AboutMe','AccountName':'AccountName','BaseOfficeLocation':'BaseOfficeLocation','Department':'Department','HitHighlightedProperties':'HitHighlightedProperties','Interests':'Interests','JobTitle':'JobTitle','LastModifiedTime':'LastModifiedTime','Memberships':'Memberships','MobilePhone':'MobilePhone','PastProjects':'PastProjects','Path':'Path','PictureURL':'PictureURL','PreferredName':'PreferredName','Responsibilities':'Responsibilities','Schools':'Schools','ServiceApplicationID':'ServiceApplicationID','SipAddress':'SipAddress','Skills':'Skills','UserProfile_GUID':'UserProfile_GUID','WorkEmail':'WorkEmail','WorkId':'WorkId','YomiDisplayName':'YomiDisplayName'</mso:ManagedPropertyMapping>
    2. Set a var in the <body> with:
    var has_MobilePhone = !$isEmptyString(ctx.CurrentItem.MobilePhone);
    Created the following based on "DepartmentField":
    if(has_MobilePhone == true) {
    _#-->
    <div id="MobilephoneField">
    <!--#_
    var encodedMobilePhone = $htmlEncode(ctx.CurrentItem.MobilePhone);
    var displayMobilePhone = Srch.U.getSingleHHXMLNodeValue(hhProps, "MobilePhone");
    if ($isEmptyString(displayMobilePhone)) { displayMobilePhone = encodedMobilePhone}
    _#-->
    <div id="MobilePhoneValue" class="ms-srch-ellipsis" title="_#= encodedMobilePhone =#_"> _#= displayMobilePhone =#_ </div>
    </div>
    <!--#_
    Saved the document to the masterpage galary and edited the search result page to (people search core results webpart) to "use a single template to display items" and selected my display template.
    Now the search result is still working but I get no mobile numbers to show up in the user info (only in the details which is default).
    Anyone has some bright ideas of what i'm missing?. I'm not used to code (which might be the cause :-)). If you also have an idea on how to make the value of the number = Mobile: <mobilenumber>. So the "Mobile:" static text is displayed
    aswell.
    Thanks a lot for your time.

    Hello,
    I did the same with my new SharePoint 2013 (I would like to display the mobile phone too) but without any chance. Have you done anything else ?
    This is my User Property "CellPhone" :
    http://www.cladstrife.com/CellPhone_Prop.png
    The ManagedPropertyMapping :
    <mso:ManagedPropertyMapping msdt:dt="string">'AboutMe':'AboutMe','AccountName':'AccountName','BaseOfficeLocation':'BaseOfficeLocation','Department':'Department','HitHighlightedProperties':'HitHighlightedProperties','Interests':'Interests','JobTitle':'JobTitle','LastModifiedTime':'LastModifiedTime','Memberships':'Memberships','PastProjects':'PastProjects','Path':'Path','PictureURL':'PictureURL','PreferredName':'PreferredName','Responsibilities':'Responsibilities','Schools':'Schools','ServiceApplicationID':'ServiceApplicationID','SipAddress':'SipAddress','Skills':'Skills','UserProfile_GUID':'UserProfile_GUID','WorkEmail':'WorkEmail','WorkId':'WorkId','YomiDisplayName':'YomiDisplayName','CellPhone':'CellPhone','HomePhone':'HomePhone'</mso:ManagedPropertyMapping>
    The "if_exist" variable :
    var has_cphone = !$isEmptyString(ctx.CurrentItem.CellPhone);
    And the "display" code :
    <!--#_
    if(has_cphone == true) {
    _#-->
    <div id="CPhoneField">
    <!--#_
    var encodedCPhone = $htmlEncode(ctx.CurrentItem.CellPhone);
    var displayCPhone = Srch.U.getSingleHHXMLNodeValue(hhProps, "CellPhone");
    if ($isEmptyString(displayCPhone)) { displayCPhone = encodedCPhone}
    _#-->
    <div id="CPhoneValue" class="ms-srch-ellipsis" title="_#= encodedCPhone =#_"> Mobile: _#= displayCPhone =#_ </div>
    </div>
    <!--#_
    _#-->
    If I delete the test lines in the display code (if(has_cphone == true) it show "Mobile:" but without any mobile number.
    Thanks for your help if any idea :)
    Best regards
    Gabriel

  • People Search results links are incorrect?

    Hello Everyone,
    Just setup People Search on SP2013 SP1 (July 2014 CU).  I have not used it in the past.
    I am finding that after I search for a staff member the results show fine.  However if I click on the user link to go to their MySite page I get the "Sorry, something went wrong" page with "User not found".
    When comparing the URLs I see this difference:
    Url from search result -
    https://.../Person.aspx?accountname=DOMAIN%255Cusername
    Url to the users MySite -
    https://.../Person.aspx?accountname=DOAMIN%5Cusername
    It appears is adding a 25 in the url preventing the "\"?
    Can anyone confirm if this is a bug in SharePoint 2013 SP1 (July 2014 CU)?
    I came across these articles which leads to think so.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/17005728-3e68-49f5-8882-85cc8260e53b/people-search-error?forum=sharepointgeneral
    http://sharepoint.stackexchange.com/questions/97882/my-sites-link-in-search-resuls-is-incorrect-escaped

    Yeah, that's a known issue caused by the MS14-022 security patch.
    It is hoped that it's in the September CU according to Stefan's comment in the link below:
    http://blogs.technet.com/b/stefan_gossner/archive/2014/08/13/august-2014-cu-for-sharepoint-2013-has-been-released.aspx

  • Site Search for Multiple Sites in 1 Account

    Is it possible to have multiple sites in 1 account with search results from selected pages?
    Eg, Site 1 only show Site 1 pages and Site 2 only show Site 2 pages in the results. When searching in Site 1, the results pull from all pages.
    Is there a way to selected certain pages for certain searches (without securing an entire site)?

    Hi Trina,
    That's not possible at this stage.
    -mario

  • People Search question in Ent Search 2013

    There's a recommendation for breaking our s3://My_Site_host_URL into its own Content Source for People Search
    How does the Seach know to connect Standard Names (ex: AnneW or A. Weiler below) to document search. Do I have to map that in Managed Properties manually, or it happens automajically?
    http://technet.microsoft.com/en-us/library/dn535606(v=office.15).aspx
    •         sps3://My_Site_host_URL, which is for crawling user profiles
    However, if you are deploying "people search", we recommend that you create a separate content source for the start address sps3://My_Site_host_URL and run a crawl for that content source first. The reason for doing this is that after the crawl
    finishes, the search system generates a list to standardize people's names. This is so that when a person's name has different forms in one set of search results, all results for that person are displayed in a single group (known as a result block). For example,
    for the search query “Anne Weiler”, all documents authored by Anne Weiler or A. Weiler or alias AnneW can be displayed in a result block that is labeled "Documents by Anne Weiler". Similarly, all documents authored by any of those identities can
    be displayed under the heading "Anne Weiler" in the refinement panel if "Author" is one of the categories there.

    Hi Kali,
    Form the article, it seems SharePoint search mechanism will automatically generates a list to standardize people's name. You could test it in your envrionment via the steps below:
    Access Search Administration page >  Content sources.
    Remove sps3://myhost in Local SharePoint sites, create a new content sources named "people", and add sps3://myhost to it. Start a full crawl.
    I use Anne Weiler as example. Make sure the User Profile has been imported. Also upload some documents authored by A.Weiler or alias. Start a cremental crawl in related content resource.
    Access search center, and test the issue. Use the keyword "author:Anna Weiler" "author:A.Weiler" and "author:alias" and see the results.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • People Search Error

    Since upgrading to SharePoint Server 2013 SP1 (April 17th release) our search for people returns results but the links to the User Profile My Site page are invalid (double URL Encoding). If, from the search results page, a user clicks on a person the link
    looks like:
    https://mysite.contoso.com/Person.aspx?accountname=Domain%255CUserName. The account name link should just be Domain%5CUserName, converting the backslash to %5C, however, it looks like the results are reformatting the link from % to %25 resulting in %255C.
    I'm not sure why it started doing this. The images next to the search results appear so the user profile phot link is correct and is not double encoded. Another place where this is occuring is in the video viewer page (videoplayerpage.aspx) the image
    next to the User Information above the Related web part is a broken link
    https://mysite.contoso.com/User%2520Photos/Profile%2520Pictures/username_MThumb.jpg?t=63515195352. As you can see when generating the link it has already converted the space to %20 but it then for some reason reformats it again convering the % in %20 to
    %25 resulting in %2520 which doesn't go anywhere. Does anyone know why the already formated links are reformated?
    Thank You

    I can confirm the workaround proposed by Trevor of modifying Search.ClientControls.js delivers the base result desired, although I think there may be an issue with that in that it's going to be tricky to push out the modified JavaScript and ensure
    that it gets updated in downstream proxies & end users browser caches. I had some user reports firsthand and seen other reports where the modified JS is not seen to have been updated on the end users client.
    This is to be expected as the symptom of the change not seeming to kick in is definitely an effect originating downstream from the server - if it's not the local workstations client caching, it could be downstream proxies.
    For the uninitiated, Chris O'Brien has a good post from a while back on some of the principles of SP clientside cache behaviour in regards to JS:
    http://www.sharepointnutsandbolts.com/2011/11/avoiding-bugs-from-cached-javascript.html
    If you needed to validate/bust the caching, you could use Fiddler on any workstation and change the expires headers for the file in question, or modify the "?Rev=" querystring part in the following line on your SharePoint page output and you
    should see the expected patched script:
    <script type="text/javascript" src="/_layouts/15/search.clientcontrols.js?rev=JRaJplErXEdDXuBoRMcg2Q%3D%3D"></script>
     Unfortunately that script reference is not directly referenced the standard SP 2013 Masterpages (not that that would help for people using OOTB masterpages anyhow) but rather generated on the fly. I've not caffeinated enough today to follow that
    trail any deeper.
    People Search is one of those places where key SharePoint stakeholders will notice breakages right away- profiles & social are obviously critical in SharePoint.  I think the best thing would be if an official patch for this were expedited
    at high priority by MS, before we all descend too much further down the rabbit hole of trying to work around this bug. :)  
    Keith Tuomi | Twitter: @itgroove_keith | Blog:
    http://yalla.itgroove.net
    Please click "Propose As Answer" if a post solves the problem or "Vote As Helpful" if a post has been useful to you.

  • MySite Deletion Emails, UPS, People Search Results

    SharePoint 2013
    We exclude disabled accounts from the UPS for a number of reasons - we don't want the overhead of non-employees, we don't want (requirement) these users to show in people search results, etc.
    Problem - Managers who receive the MySite Deletion email cannot access the account because the account does not exist.
    How do we solve this problem?
    If we include disabled accounts in the UPS, can we filter that information so that only accounts disabled within the last X number of days are included? And if that's attainable, how do we then filter out disabled accounts from people search results
    for those users who were imported?
    Is there a better way to accomplish this?
    There seem to be a large number of threads on this topic, but no real definitive answer or best practice, other than just saying 'import disabled accounts into the ups', which isn't a blanket resolution and will not work for us.
    Thanks
    SPNoob

    Not sure what you mean by "manager cannot access the account..." When you filter disabled accounts in UserProfile Sync the following things happen
    The disabled user will be missing from the next User Profile Sync.  They will be marked as "Missing from Import".
    When the MySite CleanUp job runs users who are missing from IMport will have their profiles deleted.  Their mySite will also be added to a list which will delete the site after 14 days.  Their manager in AD will also be made the secondary site
    collection admin of the mysite and sent an email with a link to that mysite.  The manager won't be able to login to the mysite home page, but will be able to access all the lists and libraries on the mySite to retrieve any IP stored there.
    After 14 days the MySite will be deleted.
    The user's information will remain in the UserInfo table of each site collection where they contributed content.  That way their name will still show for CreateBy and ModifiedBy entries on content.
    That's how the process works.  If you can explain what you mean by manager cannot access the account I'll try to help and explain further.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Internal error when person doing people search has matching name as search query

    I'm trying to find a solution for peculiar problem in our SP 2010 people search. We get this error 
    Internal server error exception: System.Threading.ThreadAbortException: Thread was being aborted.
       at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 
    when person doing the search has matching name. e.g. I as a person have name: jane doe. If I do people search either using jane or doe, I get internal error. If I search john or any other phrase, people searches return correct result. Has anyone encountered
    similar problem and found a solution for that?

    Hi mummo:
    Perhaps you can refer to the following Web site.
    http://blogs.msdn.com/b/allenwang/archive/2011/04/05/sharepoint-2010-people-search-error-dataformwebpart-prepareandperformtransform.aspx

  • Two people sharing one iWeb-site and contributing?

    Is there any possiblities in iWeb for me and my brother to create an photoalbum with iWeb and share the same photoalbum from different .mac-accounts?
    Tip me of other solutions if not possible Thnx.

    Not easily without some extra messing around with files behind the scenes.
    Have you tried flickr? http://www.flickr.com Many people swear by this site and, since it's internet based instead of being based on a file in your computer, you can place photos there from multiple users logging into the same account.

  • Search by current site context

    I an working on SharePoint 2013 online search.
    I am using "u" parameter in the url to filter results according to current site context, every child site is configured to redirect to search center site with "u" (url of the current site) in the url. thinks are forking fine but on my search
    center result page If I do another search, it goes to same result page but "u" parameter is removed now and it search accross all sites, Can I keep that "u" parameter in url?
    Flow
    I am in a sub site and search for "news", I am redirected to search center result page along with current site url in query string, results are fine and by staying on the search result page I search for "news com", I am redirected to same
    search result page but without "u" in query string and it search in all sites. I want to keep that "u" parameter in the query string.

    Hi Shafaqat,
    How did you set the “u” parameter?
    What did you mean that you were redirected to search center result page with current site url? Whether the URL of the result page contains the “u” parameter.
    I did a test as the followings:
    Go to a site->Site Settings->Search settings.
    Under “Search Center URL:”, type my search center’s url.
    In the “Which search results page should queries be sent to?” section, un-check ”Use the same result page settings as my parent”, and select “send queries to a custom results page url”. The redirct the result page to
    http://[my search center]/ /Pages/results.aspx?u=[current site url]
    Search several times, all worked well.
    If you provide your settings steps, it will make others easy to reproduce this issue and find a solution for you.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Jquery Popup Winodw in People search reult dispay templete

    Hi All
     I want show Jquery popup window in people search reult dispay templete. i used the below code to open popup window in  reult dispay templete.
    <button id="NameFieldLink" class="temp" style="font-size: 12px;text-decoration:none;color:#0072c6;border:0px solid #fff;background:transparent;margin-left: 1px;height: 15px;padding: 0 10px 17px 0px;text-align: left;cursor:pointer;font-family:
    Arial, Helvetica, sans-serif;" title="">_#= DisName =#_</button>
    The below jquery code used to open popup in control search template
    ctx.OnPostRender = [];
     ctx.OnPostRender.push(function () {
    $(".temp").on("click", function(event)
     event.preventDefault();
     $('#fadeout').show();
     $('#pop1').find('.tab-content-people').html($(this).closest('.emp-card').find('.pop-content').html());
     $('#pop1').show();
     return false;
    the problem is  while clicking on name button, page is getting postback. how to load the popup window without postback.
    Please help me .
    with Regards Sivam

    Hi,
    According to your post, my understanding is that you wanted to load the popup window without postback.
    Postback can be disabled by adding the following line to the function which handles the click event of the server side button.
    $('#cmdShowDialog').click(function(event) 
       event.preventDefault();
    More information:
    http://csharp-guide.blogspot.com/2012/06/aspnet-jquery-dialog-prevent-postback.html
    http://blog.amtopm.be/2009/03/18/jquery-modal-forms-break-aspnet-postback-functionality/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Consuming 2013 people search results on a 2010 farm

    Hi,
    We currently have two 2010 farms A and B.  Farm A contains all service applications as well as our Portal site collections.  Farm B contains My Sites and uses the search service from farm A.  This all works fine.
    We want to upgrade to 2013 so we've built a new 2013 farm.  We want to migrate My Sites from farm B and user profiles from farm A onto the new 2013 farm.
    The problem is search.  We want to leave the search service on 2010 farm A since all of the regular content is there, but then how can I federate people search results from the 2013 farm?
    Another possibility might be to use the 2013 search service to crawl the 2010 farm A.  If this is the best option how would I set this up?
    Thanks.
     - Ed.

    Hi,
    I recommend migrate the content from 2010 to 2013: 
    http://technet.microsoft.com/en-us/library/cc263299(v=office.15).aspx  This is your best option.
    Here's where you'll upgrade the service application databases,
    http://technet.microsoft.com/en-us/library/jj839719(v=office.15).aspx
    Make sure to start here though, just to dbl check the various steps of prepping for the database attach: 
    http://technet.microsoft.com/en-us/library/cc263026(v=office.15).aspx
    In order to do either of the scenario's you mentioned, you'd have to create trust between the two farms, here is a great blog post about this topic and cross farm services in SharePoint 2010:
    http://technet.microsoft.com/en-us/magazine/hh528474.aspx
    Cheers,
    Stacy Anothersharepointblog.blogspot.com

Maybe you are looking for

  • How to add attachment in me21n ?

    Hi, i would like to add attachment (doc , excel...) while creating a manual PO ? I have seen the SAp icon but as far as i did understood the functionnality, you can just retrieve an already created document... How to add a new one directly in ME21N ?

  • Controlling image order in photo stream

    I'd like to understand how iPhoto/iCloud controls the order of images in the Photo Stream.  And specifically why does it seem to automatically reorder my images. Today I loaded of images into iPhoto from the last two weeks of travel.  The images came

  • Podcasts on my ipod a mess!

    I listen and watch a number of podcasts on my ipod, and since iTunes 7, they no longer stay organized. When they're downloaded, they all just appear on a list, and I have no idea which podcast the episodes belong to. Anyone else have this problem? Mo

  • DVD Player Quit

    I attempted to play the DVD "Star Wars Episode II", and DVD Player quit with a message "encountered a system error -47". According to Apple article 9805, this was a "File is busy" error. I ejected the DVD and it was able to play normally after reinse

  • EXCEPTION HANDLE IN BULK COLLECT

    HOW WILL I HANDLE EXCEPTION IN BULKCOLLECT SUPPOSE IF NO DATA IS FOUND I WANT TO SET A VARIABLE IS 0 THEN THERE AFTER OTHER STAEMENT ARE PROCESSED ELSE ALL STATEMENT ARE PROCESSED.