PeopleSoft Server Administration and Installation Rel 8.48 Training Batch

<strong>PeopleSoft Server Administration and Installation Rel 8.48 </strong>training batch is starting from 10 November 2008 at ERP Guru.
<p>
ERP Guru is India's only Oracle Approved Education Center for PeopleSoft and JD Edwards training.
</p>
For more information visit http://www.erpguru.net/peoplesoft-class-schedule.html
Edited by: user10434723 on Oct 20, 2008 10:43 PM

Well after creating the sys database with the wizzard (with a swaplanguage to DUTCH) i ran:
rel849n.sql
copied from file project: PPTLS84CUR
opend config mgr and changed display in DUTCH (+ install workstationclient)
copied from file project: PPTLS84CURML Dutch only
copied from file project: PPTLS84CURDEL
run datamover PTPATCH.dms (since we also unzipped/installed patch 8.49.18)
copied from fileproject: PTPATCH848 (english and common)(since we also unzipped/installed patch 8.49.18)
copied from file project: PTPATCH848ML (dutch)(since we also unzipped/installed patch 8.49.18)
run datamover msgtlsupg.dms (bootstrap mode)(since we also unzipped/installed patch 8.49.18)
run datamover msgtlsdutupg.dms (bootstrap mode)(since we also unzipped/installed patch 8.49.18)
Build PPLTLS84CUR (with specified settings)
Run pt849tls.dms
Run PSLANGUAGES.DMS
Run tlsupgnoncomp.dms
update PSLANGUAGES SET INSTALLED = 1 WHERE LANGUAGE_CD = 'DUT'
run PT849TLSDUT (no bootstrap but as OPRID PS)
then I run into cannot insert duplicate key errors
I added to PT849TLSDUT the following delete statements
XX start addingXXX
DELETE FROM PSFILEDEFN WHERE FILEID IN (SELECT XLIFF_FILEID FROM PSXPTMPLTRINFO WHERE TMPLLANGCD = 'DUT' AND TMPLDEFN_ID='STDHEADER');
DELETE FROM PSFILEDATA WHERE FILEID IN (SELECT XLIFF_FILEID FROM PSXPTMPLTRINFO WHERE TMPLLANGCD = 'DUT' AND TMPLDEFN_ID='STDHEADER');
DELETE FROM PSXPTMPLTRINFO WHERE TMPLLANGCD = 'DUT' AND TMPLDEFN_ID='STDHEADER';
DELETE PSFILEDATA WHERE FILEID IN (SELECT FILEID FROM PSFILEDEFN WHERE UPPER(USERFILENAME) LIKE 'HEADER_STD_LOWER_DUT.XLF%');
DELETE FROM PSFILEDEFN WHERE UPPER(USERFILENAME) LIKE 'HEADER_STD_LOWER_DUT.XLF%';
XXX end addingXXX
run PT849TLSDUT again and it ran without errors,
I continued...
but both msgtleng.dms and ptstreng.dms run into several cannot insert duplicate key errors.
This is where I got stuck.
Is it because of the swap language?
Or did I miss something else.
Hope you respond as soon as this afternoon.
Cheers Detlev

Similar Messages

  • Failed to start server domain and process scheduler in the App/Batch VM

    Hi,
    after the modification of /etc/tnsnames.ora in the App/Batch VM :
    [psadm2@psovmab LOGS]$ more /etc/tnsnames.ora
    H91TMPLT=
    (DESCRIPTION=
    (ADDRESS_LIST=
    (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.133)(PORT=1521)))
    (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=H91TMPLT.corp.peoplesoft.com))
    I can't start server domain and process scheduler :
    NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 197; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 198; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec BBL -A :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 495; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    Thanks

    Hi,
    - Which user are you connected with when running psadmin ?
    psadmin2
    - the output :
    {[psadm2@hrapp appserv]$ ./psadmin
    PSADMIN -- Tools Release: 8.50.02
    Copyright (c) 1988, 2009, Oracle. All rights reserved.
    PeopleSoft Server Administration
    1) Application Server
    2) Process Scheduler
    3) Search Server
    q) Quit
    Command to execute (1-3, q): 1
    PeopleSoft Application Server Administration
    1) Administer a domain
    2) Create a domain
    3) Delete a domain
    4) Import domain configuration
    q) Quit
    Command to execute (1-4, q) : 1
    Tuxedo domain list:
    1) APPDOM
    Select domain number to administer: 1
    PeopleSoft Domain Administration
    Domain Name: APPDOM
    1) Boot this domain
    2) Domain shutdown menu
    3) Domain status menu
    4) Configure this domain
    5) TUXEDO command line (tmadmin)
    6) Edit configuration/log files menu
    7) Messaging Server Administration menu
    8) Purge Cache
    9) Preload File Cache
    10) Clean IPC resources of this domain
    q) Quit
    Command to execute (1-10, q) : 1
    PeopleSoft Domain Boot Menu
    Domain Name: APPDOM
    1) Boot (Serial Boot)
    2) Parallel Boot
    q) Quit
    Command to execute (1-2, q) [q]: 1
    psappsrv.cfg has changed archiving old one...
    Copying APPDOM/Archive/psappsrv.cfg to APPDOM/Archive/psappsrv_123109_1116_13.cfg
    Attempting to boot bulletin board...
    tmadmin - Copyright (c) 2007-2008 Oracle.
    Portions * Copyright 1986-1997 RSA Data Security, Inc.
    All Rights Reserved.
    Distributed under license by Oracle.
    Tuxedo is a registered trademark.
    INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec BBL -A :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 774; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    Attempting to boot ... INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSWATCHSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSAPPSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSAPPSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSQRYSRV -o ./LOGS/stdout -e ./LOGS/stderr [email protected] -- -D APPDOM -S PSQRYSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSAMSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -D APPDOM -S PSSAMSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSBRKHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKHND_dflt:BrkProcess -- -D APPDOM -S PSBRKHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSBRKDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSBRKDSP_dflt:Dispatch -- -D APPDOM -S PSBRKDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSPUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBHND_dflt:PubConProcess -- -D APPDOM -S PSPUBHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSPUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSPUBDSP_dflt:Dispatch -- -D APPDOM -S PSPUBDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSUBHND -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBHND_dflt:SubConProcess -- -D APPDOM -S PSSUBHND_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSSUBDSP -o ./LOGS/stdout -e ./LOGS/stderr -s PSSUBDSP_dflt:Dispatch -- -D APPDOM -S PSSUBDSP_dflt :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec PSMONITORSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 55021 -D APPDOM -S PSMONITORSRV :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec JSL -o ./LOGS/stdout -e ./LOGS/stderr -A -- -n //hrapp.xflash.com:9000 -m 5 -M 7 -I 5 -j ANY -x 40 -S 10 -c 1000000 -w JSH :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    exec JREPSVR -o ./LOGS/stdout -e ./LOGS/stderr -A -- -W -P /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository :
         NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 821; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8
    NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 773; check TUXDIR=/opt/oracle/psft/appbatch/bea/tuxedo, LANG=en_US.UTF-8}
    -Are you able to connect onto the database from there with the same user ?
    {[psadm2@hrapp appserv]$ sqlplus sysadm/SYSADM@H91TMPLT
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 31 11:40:12 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>}
    thank you in advance
    JM

  • Server Administration Software installation failure

    When I try to install the Server Administration Software on my MacBook, I get the following error message when I select the "Macintosh HD" as the installation target.
    +"You cannot install Server Administration Software on this volume. You are not allowed to install the software on this disk for an unknown reason."+
    Since I have a couple of Xserves and Xraids to manage, this is of interest to me.
    * ServerAdminTools10.4.11.dmg
    * Mac OS X 10.5.2
    * Macintosh HD - 193.34GB available
    I attempted the installation with two different accounts that are flagged as Admin on this laptop. Clues on how to proceed would be very much appreciated.

    Hi
    This could be a problem with the installer disk? In the meantime you can copy from your existing servers (presumably with the same versions of the Server Administration Software) the Server folder in /Applications.
    They should work.
    Hope this helps, Tony

  • Tomcat server administration and jsp

    hai,
    1)what is the default username and pwd of the tomcat server administration page
    2)How can i set the virtual path in Tomcat server
    3)where i have to save java files
    3)Where i have to store all my .jsp,.html files.
    4)how to call these .jsp files from the browser.
    5)how can i call my java files in my jsp pages.
    Thanks

    in the following site you can get good idea about tomcat and configuration.
    http://www.archive.coreservlets.com/
    Please look at Chapter 1 and click on
    installation and configuration information link

  • Mac Mini OSX Server Version and installation

    I am very interested in the New Mac Mini with OSX server configuration.
    But I would like to know what is the difference between the "Retail" OSX server version and the "Bundled" OSX server version which came with the Mac Mini ?
    Can the "Bundled" server version be installed on another intel-based Mac ( in case of hardware failure in the Mac Mini ) ?

    The difference is that this is server software, it is not the Mac OS X client software for day-to-day use on a Pro or Consumer Mac.
    The bundled software according to the Mac mini Server specs page is on an Install/Restore DVD. These are usually machine specific so it will not be usable by directly placing it in the ODD of another Mac, it should spit the disc out as unusable. But there are ways to connect the Macs and install the software to another Mac. However, the End User Agreement licenses the software for installation on only one Mac at a time.
    Dah•veed

  • Lion Server Admin, Server, connection and authentication issues.

    I'm going out of my mind... I'd appreciate any help
    Mac OS X Server 10.7.2
    Mac Mini Server (no optical drive.  dual hard drives) 2.66 C2D / 4GB RAM
    So... I open Workgroup Manager, select menu: Server > Connect.  Then Enter:
    Address = Server.local
    User Name = Server Administrator
    and my password.
    Press the Connect button and it successfully opens the Workgroup Manager window and I can edit users etc. all perfecty fine.
    I can also confirm that the Server Administrator user has "administer this server" ticked on.
    Now the trouble begins...
    I open Server (ie. the new Lion Server application).
    It shows me the "Choose a Mac" window.  Two entries:
    1. "This Mac - Server"
    2. "Other Mac"
    I click the first entry & it slides down the sheet for entering username and password.  I enter exactly the same details as above and the sheet shakes left and right, essentially behaving as if I'd entered the wrong password.  Despite the fact that it's the same password as above.
    I try it from another machine as well, just to be sure, and I get the same result.
    Then I open Server Admin.
    At some point recently, I recall having essentially the same problem.  An attempt to connect to the server shook the authentication sheet essentially suggesting wrong password.
    More recently, Server.local now doesn't even show up in the Available Servers section.
    If I try Add Server from the Server menu. Then Enter the same details above I get a  "Could not connect..." message.
    So... I'm kinda baffled.  What on earth is going on?  The three different apps are telling me different things.  One works perfectly, one says it's running fine but I can't authenticate, and the other says it doesn't even exist.
    For what it's worth, I've tried using Workgroup Manager (the one thing that will connect and authenticate) to change/reset the password for the Server Administrator user, but no matter what I set it to I'm still getting all the same results as above.
    If anyone can give me any help here I'd be very grateful!!
    Thanks!
    David.

    Is there really no one who can help me with this? 

  • Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator."

    I am the Server Administrator and have server 2012 Standard running on a single computer for our small (50 employee) company.  It's primary role is to house one software application that manages our data.  Our employees need to remotely access this
    server to use this software program.  For the last 4 months we have successfully done that using Remote Desktop.
    Unfortunately our RDS trial period ran out on our Server, and so I have recently installed 21 RDS User CALs on to the server to still be able to access this server remotely.  When I installed them, using the Install Wizard, I selected 'User CALs' as that
    is what they are.  However, when I try to use remote desktop and access the server remotely, I get the message: "remote session was disconnected because there are no remote desktop license servers available to provide a license"
    Do I have to install the RDS User CALs as Device CALs instead even though they are USER CALs?? Did I forget to check a box or something?  Please help!  We are a Non-Profit and really can't afford Microsoft's $260 support fee when I have a feeling
    this has got to be an easy solution.

    Hi,
    1. Did you create an RDS deployment or just install the RD Session Host and RD Licensing Role Services on your server?
    2. If yes to #1, have you set the licensing mode and licensing server name in Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab?  Did you make your RDSH server part of a collection?  The RDSH server must
    be part of a collection in order for the deployment settings to apply.
    3. If no to #1, then please set the licensing mode/specify the licensing server name via group policy setting.  For example, you could use gpedit.msc and configure the following settings:
    Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    Use the specified Remote Desktop licensing servers
    Set the Remote Desktop licensing mode
    Thanks.
    -TP

  • You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

    Hi all
    Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
    Right now, our developers are using the Domain Admin account to promote their website code using MSI files.  I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common.  The
    same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
    Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
    to complete this installation for all users of the machine. Log on as administrator and then retry this installation
    The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain?  We've gone as far as explicitly giving them local admin access on this server and still
    nothing changes.
    Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
    Thanks much for your help!
    Ryan

    Hi,
    You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
    of the application for specific user.
    Description of the Software Restriction Policies
    http://support.microsoft.com/kb/310791
    HOW TO: Restrict Users from Running Specific Windows Programs
    http://support.microsoft.com/kb/323525
    How to Implement Group Policy Security Filtering
    http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SQL Server Express 2014 Installation Completes with Failures and Repair Does Nothing to Help

    I am attempting to install SQL Server Express 2014 on a development machine and as usual old versions of SQL and the remnants of them are a plague to the installation.
    I have used to Revo Uninstaller to scrub the old installations and with my first attempt after some additional work on the registry I was able to get an instance to install and remarkably I was able to connect to the instance. However, I removed an application
    reference to SQL Server 2008 after the SQL Express 2014 installation (through Control Panel > Programs > Programs and Features) and it stopped working immediately.
    So I removed (uninstalled using Revo Uninstaller) every reference to any SQL Server application as well as removed all of the registry references (using Revo) and I can now install SQL Server Express 2014 with 
    "Feature" failures [Reporting Services, Database Engine Services, Full-Text and Semantic Extractions for Search and SQL
    Server Replication]  and of course it doesn't work.
    Now when I attempt "Repair" the installation the process ends normally (no errors) and reports  "Success" however SQL still has no instance and the services are not running nor are they visible when I open the "SQL Server Configuration
    Manager".
    This is the "Repair" log:
    Overall summary:
    Final result: Passed
    Exit code (Decimal): 0
    Start time: 2014-12-21 17:21:37
    End time: 2014-12-21 17:29:10
    Requested action: Repair
    Machine Properties:
    Machine name: EDWARD-PC2
    Machine processor count: 4
    OS version: Windows 7
    OS service pack: Service Pack 1
    OS region: United States
    OS language: English (United States)
    OS architecture: x86
    Process architecture: 32 Bit
    OS clustered: No
    Product features discovered:
    Product Instance Instance ID Feature Language Edition Version Clustered Configured
    SQL Server 2014 Management Tools - Basic 1033 Express Edition 12.0.2000.8 No Yes
    SQL Server 2014 Management Tools - Complete 1033 Express Edition 12.0.2000.8 No Yes
    SQL Server 2014 Client Tools Connectivity 1033 Express Edition 12.0.2000.8 No Yes
    SQL Server 2014 Client Tools Backwards Compatibility 1033 Express Edition 12.0.2000.8 No Yes
    SQL Server 2014 Client Tools SDK 1033 Express Edition 12.0.2000.8 No Yes
    SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
    Package properties:
    Description: Microsoft SQL Server 2014
    ProductName: SQL Server 2014
    Type: RTM
    Version: 12
    SPLevel: 0
    Installation location: C:\Users\Edward\Downloads\SQLEXPRADV_x86_ENU\x86\setup\
    Installation edition:
    User Input Settings:
    ACTION: Repair
    AGTDOMAINGROUP: <empty>
    AGTSVCACCOUNT: <empty>
    AGTSVCPASSWORD: <empty>
    AGTSVCSTARTUPTYPE: Manual
    ASCONFIGDIR: Config
    ASSVCACCOUNT: <empty>
    ASSVCPASSWORD: <empty>
    CLTSTARTUPTYPE: 0
    CLTSVCACCOUNT: <empty>
    CLTSVCPASSWORD: <empty>
    CONFIGURATIONFILE:
    CTLRSTARTUPTYPE: 0
    CTLRSVCACCOUNT: <empty>
    CTLRSVCPASSWORD: <empty>
    ENU: true
    FAILOVERCLUSTERGROUP: <empty>
    FAILOVERCLUSTERNETWORKNAME: <empty>
    FTSVCACCOUNT: <empty>
    FTSVCPASSWORD: <empty>
    HELP: false
    IACCEPTSQLSERVERLICENSETERMS: false
    INDICATEPROGRESS: false
    INSTANCENAME: <empty>
    ISSVCACCOUNT: NT AUTHORITY\Network Service
    ISSVCPASSWORD: <empty>
    ISSVCSTARTUPTYPE: Automatic
    QUIET: false
    QUIETSIMPLE: false
    SQLSVCACCOUNT: <empty>
    SQLSVCPASSWORD: <empty>
    UIMODE: AutoAdvance
    X86: false
    Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\ConfigurationFile.ini
    Detailed results:
    Feature: Management Tools - Complete
    Status: Passed
    Feature: Client Tools Connectivity
    Status: Passed
    Feature: Client Tools SDK
    Status: Passed
    Feature: Client Tools Backwards Compatibility
    Status: Passed
    Feature: Management Tools - Basic
    Status: Passed
    Feature: SQL Browser
    Status: Passed
    Feature: Documentation Components
    Status: Passed
    Feature: SQL Writer
    Status: Passed
    Feature: LocalDB
    Status: Passed
    Feature: SQL Client Connectivity
    Status: Passed
    Feature: SQL Client Connectivity SDK
    Status: Passed
    Feature: Setup Support Files
    Status: Passed
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\SystemConfigurationCheck_Report.htm
    However this is what the "SQL Sever Configuration Manager" look like:
    Why does this appear to not be working properly? I can not connect the the "local" instance and I would guess that the service either does not exist or is not running.
    Edward Walker

    Hello,
    To my knowledge, Revo is not a supported way to uninstall SQL Server.
    Please try to uninstall all you can using Control Panel -> Programs and Features, then perform a manual uninstall to
    remove remnants. Try the following procedure:
    1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
    2. Backup the registry.
    3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
    SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
    After performing above procedure, try to reinstall SQL Server again.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How are Windows Server Backup and Command Line Tools used in vCSHB installation?

    How are Windows Server Backup and Command Line Tools used during the installation of vCSHB?  Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment?  Are these tools not used in some deployments?

    You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
    Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

  • Netweaver administration and SAP Web Application Server r the same?

    Hi All,
    I am a Basis Consultant & new to Netweaver,..
    I am interested in Netweaver administration..
    1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
    2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
    Thanks in Advance ,
    Malti

    Hi Malti,
    You must first download and read this document and then read 'help.sap.com' for what is netweaver.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
    The above mentioned document is a crisp guide to what is WAS.
    Further I got this from the sdn/netweaver webpage
    SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
    You have lots of reading to do now.. hope that helps
    Regards,
    Siddhesh

  • Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin server roles on servers.

    I'm getting the following errors while trying to provision a PS 2010 PWA on our SharePoint 2010 farm. Our PS instance has been working for a while now, and houses two other PWAs. But today,
    when trying to create this one, I get "Failed - see the Application event Log" and the following in the Event Viewer:
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6980
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: server
    Description:
    Provisioning 'PWA/SDN': To create databases we need dbcreator and securityadmin server roles on servers 'DB1' and 'DB1'.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6980</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676727</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">DB1</Data>
    <Data Name="string2">DB1</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6993
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Provisioning 'PWA/SDN': Failed to provision databases. An exception occurred: To create databases we need dbcreator and securityadmin server roles on servers..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6993</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676728</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">To create databases we need dbcreator and securityadmin server roles on servers.</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6958
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Provisioning 'PWA/SDN': Database provisioning failed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6958</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.225Z" />
    <EventRecordID>1676729</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 4/2/2014 2:09:08 PM
    Event ID: 6971
    Task Category: Provisioning
    Level: Error
    Keywords:
    User: DOMAIN\DB_Access
    Computer: sharepoint
    Description:
    Failed to provision site PWA/SDN with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and
    securityadmin server roles on servers.
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
    --- End of inner exception stack trace ---
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType& originalDatabaseState, Guid& adminGuid)
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-SharePoint Products-Project Server" Guid="{b2178104-1b5b-4c20-8c8f-960678ced9e5}" />
    <EventID>6971</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>20</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-02T19:09:08.226Z" />
    <EventRecordID>1676730</EventRecordID>
    <Correlation ActivityID="{90131653-B0A4-4FAF-A43C-7DF07CBC3332}" />
    <Execution ProcessID="11040" ThreadID="12384" />
    <Channel>Application</Channel>
    <Computer>sharepoint</Computer>
    <Security UserID="S-1-5-21-2280669542-4145173436-3058324265-4222" />
    </System>
    <EventData>
    <Data Name="string0">PWA/SDN</Data>
    <Data Name="string1">Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision databases. ---&gt; Microsoft.Office.Project.Server.Administration.ProvisionException: To create databases we need dbcreator and securityadmin
    server roles on servers.
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType&amp; originalDatabaseState, Guid&amp; adminGuid)
    --- End of inner exception stack trace ---
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureDatabases(ProjectProvisionSettings provset, SPSite pwaSite, String adminName, String adminEmail, ProjectDatabaseStateType&amp; originalDatabaseState, Guid&amp; adminGuid)
    at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)</Data>
    </EventData>
    </Event>
    Anybody ever get any events like this before? I'm not finding much or nothing on Google or on other forums, so I thought I would run it past and see if anyone has experienced anything of a similar
    nature. And yes, the farm account obviously has creator/secadmin permissions, at this point of our deployment....
    I look forward to any and all feedback. Thanks and good afternoon!

    I figured out the answer to this myself. For those few who might run into something akin to my error...
    During the off-hours of where I work, I re-applied the farm account credentials to all dB server VM SQL services that had the account for a log-on (i.e., MSSQLSERVER, SQLSERVERAGENT, etc.) as well as all SharePoint services on our WFE/App Server VM (a two
    server farm is what we host), in that order. Then I rebooted the dB server first, followed by the SharePoint server. Upon coming back, everything was working fine again. I was able to provision a site, no probelm, and it seemed to even be a little snappier
    when doing so.
    One note: doing this procedure gave me a "One or more services have started or stopped unexpectedly" error in the Health Analyzer, for the SPTimerV4 service. When you get this, simply enter into the item and click on "Reanalyze Now;" this will quickly clear
    the error out of the Analyzer, and all should be right with the world! :)

  • Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Have you tried deleting the account and re-adding it on the phone?
    What version of Exchange server are you running?

  • Installation Biztalk Server 2013 and SQL on different machines

    I want to know if I can install a Biztalk server 2013 and SQL on different machines?

    BizTalk Server 2103 and SQL Server (SQL Server
    2012 or SQL Server 2008 R2 SP1) can be installed and configured on different machines.
    For more instruction about this installation, refer to following MSDN installation guide for BizTalk :
    Installation Guides Related to BizTalk Server 2013 and 2013 R2
    from the above list download -
    "Installing BizTalk Server 2013 and BAM in a Multi-Computer Environment.docx" document for your requirement.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Upgrade to version 10.5.x, error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??

    Hi; Attempting to upgrade to version 10.5.x, but I keep on getting an error - "There is a problem with the Windows Installer Package". I'm installing as Administrator, and have done an uninstall of the earlier version. Any ideas??
    Needing to upgrade to allow connection of a 4S iPhone to the Laptop.
    Thanks!! - Tim.

    Repair your Apple Software Update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you can't find ASU in all program, you can do it in CONTROL PANEL, ADD N REMOVE PROGRAMS.

Maybe you are looking for

  • HP Smart Web Printing Select Button does not appear

    Just started to use Smart Web Printing. The Select Button as shown in the help file does not appear on the screen. Instead, a small box "x Select area to remove" shows within the area to print. Printer: HP Photosmart C6380 System: Windows Vista SP2 H

  • Itunes will not install requesting adminstrator, which I am  help

    I am trying to install update for itunes.  I keep getting need to log on as administrator, which I am.  Please help.

  • Find purchasing org based on PO no.

    Hi Guys and girls. I am doing some changes to the sus PO smartform (standard form BBP_SUSPO) and one af the requirements is that the footer type should be determined by purchasing org. But now I cannot find any tables where I can find the purchasing

  • Business Rules Performance

    Hi all, We have problem in giving access to the business rules.This is the scenario, once you open the business rule navigate to access privileges tab and then once you hit 'ADD' its taking about 2-3 minutes to open the user list window.Is that somet

  • Please answer, if i buy an iPad and a newer one comes out.

    Say i were to buy the new iPad, and next year a newer iPad comes out. could i return my previous iPad and get the newer one? or what would happen? Please answer!