Percentage Bar

I am using APEX 4.2 and I have a classic report that I'd like to show as many record as possible per page. I'd also like to show a percentage column for each record. I've calculated it in the code and chosen to use the PCT_GRAPH option in the Column Attributes. It is the perfect size for what I want to do. However, it doesn't look like the percentage bars I have seen in demos. I chose a dark blue as the background and light blue as the foreground.
In IE9 I get a solid dark blue bar with a tiny light blue strip at roughly the 50% mark regardless of what the percent calculation is.
In Firefox I get the solid dark blue bar with a tiny light blue strip at the correct percent position.
1) Why is IE9 not marking the percent correctly when Firefox is?
2) Why are the bars not being filled?
I am getting things that look like |_______________|____|
I want it to look like ||||||||||||||||||||||||||||||||____|
Any thoughts?

The data is different.
But I found the problem after comparing the two pages. Apparently at some point I set all my columns and headings to be aligned to the center of each column. The progress bar was moving from the center out. My data % was so small it looked like a pin point line at roughly the 50% mark. I have no idea why FF and IE displayed the line wildly differently. I changed the column alignment to left and the graphs appear as expected in both IE and FF. Thanks so much for being a sounding board!

Similar Messages

Problem with Stacked Percentage Bar

Hello,
We are having a lot of trouble with the Stacked Percentage Bar chart. Our chart has 2 series, one for Yes values, and one for No values. The query for each series is a PL/SQL returning a SQL query. Right now, nothing shows up on the graph. It is just an empty area. Here are the queries for the 2 series:
YES SERIES:
DECLARE
tmpSQL varchar2(2000);
BEGIN
-- CONSTRUCT SQL STATEMENT
tmpSQL :=
'select null link,
FIELD1 label,
COUNT(' || :P23_ITEM1 || ') value
from
TABLE1, TABLE2
where
TABLE1.ID = TABLE2.ID
AND
(' || :P23_ITEM1 || ' = 1 ) group by '
|| :P23_ITEM1 || ', FIELD1 ';
return tmpSQL;
end;
NO SERIES
DECLARE
tmpSQL varchar2(2000);
BEGIN
-- CONSTRUCT SQL STATEMENT
tmpSQL :=
'select null link,
FIELD1 label,
COUNT(' || :P23_ITEM1 || ') value
from
TABLE1, TABLE2
where
TABLE1.ID = TABLE2.ID
AND
(' || :P23_ITEM1 || ' = 2 ) group by '
|| :P23_ITEM1 || ', FIELD1 ';
return tmpSQL;
end;
We'd appreciate any help.
Thanks,
Nora

Here's my result with six values in a single series. I double clicked the last bar to change its colour from the default grey (which was visible) to magenta.
Numbers 2.0.3, iBook G4, OS X v10.4.11
(Shot in the dark:) Try double clicking the value label, then changing the order position of this item.
Regards,
Barry

Stacked Percentage Bar label and value

Hi,
I have created a stacked percentage bar using 4 series. I have 2 questions.
First question: Since it is a percentage bar, the height for all seriers are the same (100%), but each series has a value (eg. 463). Under series attribute, I checked on "show value", but when I run the page, the values for each series don't show up. Is there a way of showing these values?
Second question: If the labels are too long, they get cut and don't show the full text, is there a way to enlarge the space so all text for the labels fit in the graph?
Thanks a lot!

If the values on the bars are not displaying you probably have the "sparse matrix" problem. Stacked bar charts do not work correctly unless there is a row for every possible value of the "order by" variable in every series. You can test this by running the query for each series in sqlplus. You must get the same number of rows from each query.
The best way to fix this is to create a "stub" table that contains all of the distinct values of the "order by" column in your source table. Use this stub table as a pivot for a left outer join with the source table in your series query. Sometimes you need to nvl to handle nulls in the result. When every bar has a value in every series query then the values will be displayed on the bars.

Battery Percentage Bar ???

I have a new iPhone 5C. Up until today I had no problems. This morning the battery percentage bar was all black but said 100%. I plugged it in and the bar was all green and still said 100%. When I remove the charger plug it goes back to being all black but keeps saying 100%. Can anyone assist with this issue please? Thanks.

Sharfaraz wrote:
Hi Lugi, thanks for your reply. I just wanted clarify here as some sites are claiming the downgrading is possible.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Downgrading "may" be "technically" possible through jailbreaking, which WILL VOID any and ALL warranty you may have and support from Apple and these forums ( Please read the ENTIRE article I linked to ).
You also put yourself at significant risk of turning your iPhone into a very expensive paperweight.
Sharfaraz wrote:
Anyway I was wondering if I restote via Itunes will the fast discharging of battery improve?
I have found two articles online that may help with the battery drainage issue until Apple releases an update that fixes the issue: 1.)http://www.macobserver.com/tmo/article/how-to-manage-and-control-cellular-data-u sage-on-your-iphone.
2.) http://www.macobserver.com/tmo/article/how-to-improve-iphone-battery-life-in-ios -711?utm_campaign=tmo_waylf.
I can not say how good or valid the information in these links may be as I don't have an iPhone.

Percentage Bar chart with more than 1 measure

Hi everbody,
i have a new big problem.
point of departure: i want to create a bar chart (stacked vertical) with more than 1 measure.
Vertical axis should be from 0% to 100%. Horizontal there are diverse, let's say departments.
Now it becomes tricky: Every department once more has its own under-departments.
So far so good. The measure is the number of employees per under-department.
So: in one bar you can see the complete number of employees per department AND the number of employees of one under-department in each block of this bar.
-> That's the idea!
Now: The whole chart should be presented in percentage.
-> Therefore i need to divide the particular block by the complete number of employees per bar and multiply it by 100.
My question is: How can i create a kind of dynamic variable, which adatps itself to the particular department
Edited by: 941338 on 27.06.2012 04:53

Looks like you need a dynamic variable to hold the value to calculate futher, for that using prompt(this should follow your criteria to get value) with prsentation variable, use the presentation variable in the report to calculate.
If it is helpful, please mark as correct or helpful

The "OTHER" data on the percentage bar on the iphone

Prob be discussed before but...
iv had my iPhone for about 3 months now and the "other" data has never really been above 0.45GB, but today after syncing it has gone straight up to 1.20GB!
I have done all the usual stuff to get it back down like, delete all the old messages, recent calls, old emails and trash folders, browser history, cookies etc. then synced again, but its still at 1.20GB.
Does anyone know how to lower the size of it, or what data is classed as other?
many thanks!

Hey, thanks for the advice. I tried that just now but it didnt seem to make any difference... well worth a try tho!
Thanks for the advice to restore too, i have just done that now and it has fixed the problem, not just with the "other" file but the whole phone seems to be like brand new and really fast again!
Thank you very much guys!

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

How to configure a status process

I would like to configure a control process using a percentage bar for a VI

Hello Novice Programmeur,
The file that I sent to you, is a ".LLB" file : It allows to save all VIs, objects and external subroutines, excluding those in the folder vi.lib, to a library. It allows to save a hierarchy of VIs (Main VI and SubVIs) in one file. This kind of file can be open by LabVIEW.
You will found in the attached zip file the same program with the main VI and SubVIs. Launch and execute the VI "ProgressBarExample".
Best Regards,
Sanaa TAZI
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif
Attachments:
test.zip ‏54 KB

Issues With Tablet Sensitivity

I just recently purchased my touchscreen notebook and installed a digital art program (Krita) with no problem. I plugged in a wacom tablet that I've had for years and it seemed to have installed fine, it made a beeping noise to indicate it had been plugged in and I can move around the mouse fine. But the computer doesn't recognize sensitivity at all. I tried taking it back out of the usb and plugging it back in but that also didn't work. My wacom tablet is an intuos4. Is this an issue on my end? Or is the older tablet not compatible with my new notebook? If it's somethig to do with instalation of the tablet or the new computer, is there something I can do to fix it?

Manuel Manev wrote:
Hi all, I have the following question - bought iphone 5c used a couple of days ago and have 2 issues so far - I have problems charging it - the battery would drain to 0% and will plug it in but will not charge, instead after a while the phone would turn on and stay 1% forever. Tried another charger and it charges but when it is off and charging it does not show the percentage bar on the screen. Secondly - when I turn it on, seems like there is weird light from the top and the screen seems to be no very responsive, when the phone is on.
Return the phone and get your money back, Then purchase one from an authorized Apple dealer.
Could be you bought a lemon.

IPad2 with 4.3 software that won't erase & reset

I've been trying to erase & reset my iPad2 for 3 hours with no progress. The percentage bar hasn't even started. It's just the blank spot waiting to show how much is completed. It won't let me manually turn it off or restart it. Any ideas of why or what I should do?

RECOVERY MODE STEP BY STEP
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

I can't install widows 7 using bootcamp ?

Hi there...
I tried to install windows 7 using bootcamp, but when the its Expanding the widows file it stop as it shows on the percentage bar on 68% ???
I tried so many time But i get the same problem.. When its working fine by using the parallel...
And this is my macbook pro retina, Mid 2014, Processor 3 GHz Intel Core i7, 16 GB 1600 MHz DDR3, with 1 TB Flash Storage. ( Buy it Tow week ago )
please let me know if there is any solution >>

The DVD may be working, but the ISO created from it may not be created correctly.
Please see How to install Windows using Boot Camp - Apple Support and specifically see Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support which allows an ISO to be created from the DVD used by Bootcamp Assistant on your Mac.

Preloader and Document Class BIG question (yeap please help)

Hy,
I know that this its a question posted many, many times, but
after searching the net, reading a lot of books and searching this
forum too, I cant get out with a solution. If I'd say for sure
there is no possibility to create something like this, I just go
back to old methods but is not the scope of Adobe with AS3 to
encourage the use of OOP principle or not?
The problem:
I have a single fla file (AS3) with a single frame on
timeline, frame that its there when you will create the file with
flash. In the library I have different symbols, that for simplicity
are only jpg image, (BitmapData) checked for export for
ActionScript and exported on frame one. An external .as file called
DocumentClass its off course my Document Class
This its all that I want to do with the fla, the goal its to
create, animate etc. only with AS3 in external classes, no timeline
script. I don't want to load external files, XML, or else in this
movie. I just want a single swf after compilation, no additional
files.
Ok, how do I create a preloader that will take care of
starting the logic after the whole swf its loaded and in the same
time shows the user a percentage or a load bar or something that
its not the blank screen when the swf its downloading. I want to do
this without another swf that load this swf, or timeline scripts,
or place all the content on second frame and then gotoAndStop to
the third frame. All this are not solution but cheap tricks, that
are against all this OOP principle that I just continue to read in
books and here from guru programmers.
The big question is:
It is possible to create a preloader, when use a document
class with your fla? And if yes, how?
I know that the Document Class its not instantiated if its
not fully loaded, if that's true when the document class will be
fully loaded? maybe after the whole movie its loaded? And, if its
true, it will never show a percentage bar "while" the movie its
loaded. And if that's true WHY use a document class anyway?
Thank you for reading this and I really wait to get some
answer.

I am pretty sure you cannot do self preloader with one frame
and all the objects in the library. I guess the key here is
one-frame design. Screen refreshes (renders) only when all the
scripts in the frame are executed - this is a very important thing
to understand about how Flash works. Yes, you can force screen
refresh with updateAfterEvent() method but it is attached to a
handful of events only (MouseEvent and TimerEvent) but, again, all
this functionality is available only after first frame scripts are
executed. Thus, it seems like the only way to create preloader from
within SWF is to use multiple frames and set library objects to
load in later (not first) frame.
quote:
And if that's true WHY use a document class anyway?
Well, preloader is the last thing that would be on my mind in
terms of using AS3 ability to link DocumentClass to the top movie.
This feature allows for very sophisticated architectural
approaches. It has no connection to preloader as to any other
features developer wants to implement. Neither it depends on or
negates timeline. As a matter of fact, although I love one-frame
applications, I find on numerous occasions that my application
would be more efficient if I used several (at least two) frames.
gotoAndStop is not deprecated. It is a valid MovieClip class'
method. After all, having only one frame doesn't mean not having
frames at all - there is one already. Frames are fundament of
Flash. AS3 did introduce frameless entities like Sprite, etc. but
it doesn't mean that frames are going anywhere.
I would agree that timeline code is inferior to
classed/packaged (read: better organized) code but, still, how is
it not OOP? Frame is an Object, right? Why using timeline is cheap
and not a solution?
On a side note, I see too many times how some authors (and
managers) are pushing their agenda (or close mindedness) onto their
audience with no real substantiation. Claiming that timeline in
Flash is not valid architectural decision from OOP standpoint is
totally wrong. As wrong as strict adherence to design patterns. I
don't think there is sharply defined "right" or "wrong" in
programming. One finds the best optimal solution. The goal is to
create something that works fine. Unless, of course, the process is
the goal - but very few of us can afford focusing on the process.

How do I get back features from older Firefox versions?

Some features of older version FF are gone from FF 4.0.
3 I particularly miss:
(1) Percentage bar in upper left corner page of Inbox messages. GONE!
(2) I could click on arrow on right side panel (annoying ads) and hide said panel and widen my Inbox message area. This useful feature now GONE!
(3) Most important of all I could click on an e-mail picture file and preview thumbnail of photo before downloading it. Someone in their wisdom decided that that wasn't useful or timesaving; now that's GONE!
My question is are there any plug-ins or add-ons available to get these features back in Version 4.o?
If so, I'd like specific instructions on how to do this.

I know that Firefox doesn't do e-mail, but I view my e-mail through SmartZone which I access through Firefox browser.
If there is a way to view messages in SmartZone without going through either Firefox or Internet Explorer I'd love to know about it.
Thanks.

Bootcamp Not Working

Hello I have a iMac Late 2010 model and I'm trying to install Windows on it and every time I do I follow all the Steps seen videos everything but when it gets to the part that it shows the Percentage bars for Windows 7 it restarts and when it starts up again it will stay on a Black screen and not do anything I restart it and hold Option/Alt and choose the Windows Drive and it doesn't do nothing it tell me Windows shut down unexpectedly and to choose Start Windows Normally Etc and it doesn't work if any one had this problem and got it fixed please help me out here cause I need a .exe program and Macs don't run that so Please help.
Thanks for all your help
Message was edited by: ADKIc3mAnX

Asked (and answered) 100s of times.
There is a tab for "Support" and there is a forum and support section for Boot Camp.
http://www.apple.com/support/bootcamp - you'll find tech support article links

Percentage Bar

Similar Messages

Maybe you are looking for