Percentile_Disc Function in OBIEE 10g - Help needed at the earliest
Hi All,
I have a requirement of using PERCENTILE_DISC function in OBIEE 10g repository. I tried NTile function, to fetch the percentile. But that is not what am intending to see.
I have a requirement something similar to this, to be implemented in repository. Could anyone throw some light in this regard?
PERCENTILE_DISC(.25) WITHIN GROUP (ORDER BY F.Days asc) OVER (PARTITION BY A.NAME, B.PLACE)
Here F = Fact
A = 1st Dimension
B = 2nd Dimension
Days = Is calculated as TIMESTAMPDIFF(SQL_TSI_DAY, A.DATE, B.DATE). Established Inner Join, to fetch this calculation in to the FACT
Appreciate your responses at the earliest. Thanks once again.
Regards,
Sarat Nallapati
Hi,
I don't have any idea on percentile_disc.
But,in OBIEE we have a function PERCENTILE()
It will give the percentage of each value in the total sum of all the values.
once check it.
Regards,
Lakshmipathi.
Similar Messages
-
Help needed at the earliest( PP, SD, MM or BW)
Hello guys,
I have done my Master of Science in Supply Chain Systems from a university in NY, and want to enroll for training in SAP, although, I have a difficult deciding the module I should go for. My background permits me to learn PP and MM. I am also looking at SD and BW.
I do not want to make a decision based solely upon my background here because I am not keenly interested in making a career in Supply Chain systems. Will it then be best for me to learn BW?
I also wanted to know as far as the job market is concerned , which module has the most demand and jobs out there? Also from what I understand, BW will be having jobs in other areas than only manufacturing, as opposed to MM or PP because it is Business Intelligence.Please Help me make a decision in this regard,
Thanks a lot for your help.
Amit .Hi,
Since you are not very keen on leveraging your background, the decision should be based on going onto technical or functional roles. BW is a techno functional role where you need to know bit of both sides, but more on technical side.
PP, MM, SD are functional roles which need more business knowledge. APO is the best choice based on your back ground as it really take advantage of your knowledge in supply chain systems. PP also aligns with your back ground.
But other than APO and PP, you may not find much advantage for your background. SAP R/3 is a transaction oriented system where pure academic knowledge may not be much use. At the same time, once you are trained properly, you can work on any module.
Good luck.
Regards
Anil -
Obiee 10g - How to Increase the default size of Bubble chart radius axis
Hi,
I have an requirement of creating bubble chart in obiee 10g.
When i was developing the bubble chart i noticed that there is no option of increasing the size of the bubble.
When the measure value is low the bubble is not getting displayed.
Kindly help me with any solution.
Regards,
AbdulHi Alok_Aswal,
In SQL Server Reporting Services 2008, the Bubble chart has several custom attributes which allow us to control the size of the bubbles. "BubbleMaxSize" and "BubbleMinSize" attributes allow us to define the size of the bubble in the chart series. The values
set are in percent of the whole chart size. We can find those attributes in the property pane by selecting bubble series and expanding 'CustomAttributes' properties.
And based on my research, the Marker size has a wide range, but for some reason once we get to around 8 the bubble in the legend will not grow any bigger. So in your scenario, we can set the Marker size to 8pt, then set the appropriate “BubbleMaxSize" and
"BubbleMinSize" based on the chart size to make the size of both the bubble are the same. For example, we can also set “BubbleMaxSize" and "BubbleMinSize" to 8, then manually adjust the chart size until both the bubbles have same size.
Beside, we can delete the original legend, and drag a tablix to the right of the chart. And then insert the corresponding data and color to tablix to let it looks like a legend. For more details information, you can refer to the link below to see Mike’s
post:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cbf2f48e-fe40-4c1b-b82a-d40fd269f2ef/setting-custom-colors-on-a-column-stacked-bar-chart?forum=sqlreportingservices
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Help needed with the Apple firewall.
Back before I upgraded to Leopard when I set the firewall to stealth and then had grc.com scan my iMac G5 - well it was invisible according to grc. Fully stealthed. Now when I do the same thing it shows that ports 135-139, 445 and 593 are slealthed, and 548 is OPEN! Everything else is just closed. It tells me that it not only receives pings, but it also ANSWERS them.
I've tried changing the settings on the firewall then restarting the computer but that makes no difference to grc. I sent com.apple.alf.plist to the trash but that made no difference either. I even tried using Brickhouse and Noobroof with no help, which is understandable since they are just new front ends for the Apple firewall.
I have Pacifist, so I guess I could just reinstall the firewall files but I don't know what to install.
This bird is not sleeping it's DEAD! It just feels broken since nothing I do changes it's functioning.
Can anyone suggest a way out of this mess. Right now I'm feeling very exposed and I'd love to have my old firewall back.
Message was edited by: Harold FinkHello
Using the method suggested by Aron:
prha.creation_date >= :start_date
AND
prha.creation_date < :start_date + 1Oracle will be able to use any indexes present on creation_date. Using the TRUNC(prha.creation_date) method, oracle will only be able to use an index if it is a function based index using TRUNC. Also, the bind variable data types should be of the date data type and if they are not, then the TO_DATE function should be used, but the TO_DATE function does not need to be and should not be used on a date data type.
prha.creation_date >= TO_DATE(:start_date,'MM/DD/YYYY')
AND
prha.creation_date < TO_DATE(:start_date,'MM/DD/YYYY') + 1HTH
David -
Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
NeptuneThank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience? -
Help needed regarding the updation of "Relationships" in BP
Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore. -
Can I install OBIEE 10g and 11g on the same machine?
While I'm waiting for new hardware, I wanted to get started on installing OBIEE 11g on my laptop. Can I do this if I already have 10g installed?
I want to make sure if I install it that it will not impact my current 10g setup. I'm not sure if it overrides certain files and folders or if I can do a separate installation to have both.Hello everyone.
I have OBIEE 10g on my Production box pointing to the Oracle Database 11g R1 which is also having OWB integrated in it.
Now, I am planning to upgrade OBIEE 10g to 11g and Oracle Database from 11g R1 to 11g R2, so that OWB will also be upgarded, as it is integrated in 11gR2.
I am confused about, how to run RCU on the database, as OBIEE 10g schemas and packages will already be there in the database.
If I run RCU again, what will it do???
Has anyone done this before? or any good document available ?
Many Thanks,
Ahsan. -
Help Needed regarding the Header Information
Hi,
I am doing a File to IDOC Scenario for CREMDM. The problem I am Facing is that the Basic type is as CREMDM but it should be CREMAS. I am invoking the Function Module IDOC_INPUT_CREDITOR_MDM and I have made a 'Z' out of that. I have also Used a Custom Process Code to link with this Z Function Module, but it is giving me the Error that " Wrong Function Module Called up". In this Z Function Module I have also checked the Exception of "WRONG FUNCTION CALLED".
<b>Can someone tell me the details of how I can know from where the Header Information is being populated and how i.e. the EDI_DC part.</b>
I did the same thing (i.e. made a Z Function Module and a Z Process Code for DEBMDM) and it is working. In case of the CREMDM scenario, there is a check in the Function Module which checks the IDOCtype and it is giving an error there, whereas in the Header it is coming as CREMAS04 but the Function Module is Giving me an Error.
<b> Can someone Suggest me how I can go about a file to IDOC Scenario for CREMDM and which Function Module i need to Invoke.</b>
Thanking in anticipation.
Warm Regards
SomnathHi,
Since this is file to idoc scenrio,the header inforamtion will be populated with the information provided in the mapping part i.e,it will be dependent on the fields mapped during the message mapping in XI .
so the edc_dc control record parameters should be populated with the parameters mapped during the messsage mapping,depending on the file parameters or the constant defined during mapping.
and in your case if the message type is CREMDM then the basic type has to be CREMDM04,which u hav to chk with the xi ppl who performed the mapping.since it is mapped to CREMAS04 u r getting a error in function module.so try changing basic type to CREMDM04.
regards
jithesh -
Hi reply needed at the earliest
hi,
i want this problem sorted out, if any one can help it will be so kind of,
i have declared a internal table with a varialbe v_val as type i and i have have appended values randomly as ( 1,8,6,9,4,2,5,3 and 7)
the list is printed.
now i want this random list to be displayed in DESCENDING ORDER, WITHOUT USING SORT STATMENT.
did try various methods but unfortuantely couldnt get the solution, pls kindly someone write the rest code for the same at the earliest possibility, will be really nice of you. Thanks.i tried this code..it worked...
types : begin of tp_aa,
val type i,
end of tp_aa.
data : itab type table of tp_aa with header line,
itab1 type table of tp_aa with header line.
data : g_val type i,
c_n type i.
itab-val = '4'.
append itab.
itab-val = '3'.
append itab.
itab-val = '6'.
append itab.
itab-val = '9'.
append itab.
itab-val = '1'.
append itab.
itab-val = '8'.
append itab.
describe table itab lines c_n.
do c_n times.
loop at itab.
if g_val le itab-val.
g_val = itab-val.
move itab to itab1.
endif.
endloop.
append itab1.
delete itab where val = g_val.
clear g_val.
enddo.
loop at itab1.
write itab1-val.
endloop. -
Group By clause in oracle 10g help needed
Hi
we have a requirement that get the AR aging details at customer level.I have written the following query to fetch the correct rows at invoice level.But now i need to sum the amounts and i should show at invoice level and customer level.Could you please help me how can i group by customer level.
Here is the query i used
select ps.org_id
, sob.SET_OF_BOOKS_ID
, sob.CHART_OF_ACCOUNTS_ID
, gcc.SEGMENT1 Company
, gcc.SEGMENT2 Location
, gcc.SEGMENT3 Department
, gcc.SEGMENT4 Account
, gcc.SEGMENT5 Future_1
, gcc.SEGMENT6 Future_2
, gcc.SEGMENT7 Future_3
, gcc.CONCATENATED_SEGMENTS gl_cc_concat_kff
, ps.trx_number
, ps.trx_date
, ps.due_date
, ps.invoice_currency_code
, sob.currency_code SOB_Currency_Code
, ps.class
, ps.amount_due_original
, ps.amount_due_original * nvl(ps.exchange_rate, 1) acctd_amount_due_original
, ps.amount_due_remaining
, ps.acctd_amount_due_remaining
, ps.status
, ps.cust_trx_type_id
, ps.customer_site_use_id
, ps.customer_trx_id
, ps.cash_receipt_id
, ps.gl_date
, rctlda.CODE_COMBINATION_ID
, ps.customer_id
, nvl(rcta.ATTRIBUTE5,ps.CUSTOMER_ID) End_Customer_Id
, rc.customer_number
, rc2.CUSTOMER_NUMBER Brand_Cust_no
, round((sysdate-ps.due_date))
from gl_sets_of_books sob
, hr_operating_units ou
, ar_payment_schedules_all ps
, ra_customers rc
, ra_cust_trx_line_gl_dist_all rctlda
, gl_code_combinations_kfv gcc
, ra_customer_trx_all rcta
, ra_customers rc2
where sob.set_of_books_id = ou.set_of_books_id
and ou.organization_id = ps.org_id
and ps.status = 'OP'
and ps.org_id is not null
and ps.CUSTOMER_ID=rc.CUSTOMER_ID
and ps.CUSTOMER_TRX_ID=rctlda.CUSTOMER_TRX_ID
and rctlda.ACCOUNT_CLASS='REC'
and rctlda.latest_rec_flag = 'Y'
and rctlda.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID
and ps.CUSTOMER_TRX_ID=rcta.CUSTOMER_TRX_ID
and gcc.CODE_COMBINATION_ID=39446
-and ps.trx_number = '1-15O0A8O'
--and rc.CUSTOMER_NUMBER='1-10PA5KX'
and nvl(rcta.ATTRIBUTE5,ps.CUSTOMER_ID)=rc2.CUSTOMER_ID
Could any one help me how to get the same columns with sum( ps.amount_due_original ) for each customer.I tried to use group by clause but it is again giving invoice level.
But my req is for each customer invoice amount should be summed and it should give the total
Thanks
Yif you need to have the sum of invoice related to each customer then may also need to check for the
CUBE
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10002.htm#sthref9448
and example here
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10002.htm#i2066443
and ROLLUP
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/statements_10002.htm#sthref9445
I couldn't follow with all your SQL statement, or I could rewrite it for you again
Thanks
Edited by: user9532576 on Jul 21, 2009 9:24 AM -
SAP PS Module Report, Help needed for the Right Logic.
Hi,
I have to develop a PS module Report . This spec of this report is when you enter , project # , month , date , proj type it should display all the projects and only the billing levels with different fiels like ITD cost, ITD sales, ytd cost, sales, awards etc etc.
Right now Iam getting the O/P : in the following manner, There are many fields I am just showing the desired ones which have to be changed.
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- --- -
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
14148.001 wbs1 -
123 -
456
14148.001 wbs2 -
567 -
890
But for me the desired output must be only for project and the billing levels. It shouldnt be for WBS elements xxxx.001 and xxxx.002.
Desired output:
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- 690 -
1346
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
The ITD costs and YTD costs must be added 123 + 567 = 690 and
456+890 = 1346.
And these values must come on the project level.
P.S: I can restrict the values for wbs elements , means I can filter them at PRPS table by giving prps-stufe LE 2. Then I wont get the wbs level, But I want the values of these to be added up and then show it on the project level.
Please go through this code and let me know where exactly I need to put the right logic to work in the desired manner.
Thanks in advance
Dan
Code Below************************
[code]TABLES: PROJ, "Project Definition
PRPS, "WBS Elements
prhi,
CEPC, " Profit Center w/ Group Head info
BPGE, "Plans (12, 13, etc.)
COSP, "Primary Cost Element (Bill Sales, DPC)
COSS, "Secondary Cost Element (Shrd Sls,Sal,etc)
COSB, "Results Analysis Cost Elements (Unbil Sls)
COOI, "Commitments management: Line items
JEST, "Project Status
TCJ04, "Person Responsible for Project
zpclasses, "Project classes.
New Added
CRCO, " Assignment of Work Center to Cost Center
CRHD. " Work Center Header
Record Layout of extracted data
TYPES: BEGIN OF EXDEF, "Data definition of extract data
X_BU(2) TYPE C, "Business Unit
X_CNTR(10) TYPE C, " Profit Center
X_PROJ(24) TYPE C, "Project def (Prj)
X_CREP(30) TYPE C, "Contract Rep.
X_BDREP(25) TYPE C, "BD Rep. name
X_GRPH(15) TYPE C, "Tech Rep employee name
X_ACTREP(15) TYPE C, "Acct Rep employee name
X_PMGR(15) TYPE C, "PM employee name
X_TTLE(35) TYPE C, "Title
X_CLNT(20) TYPE C, "Client
X_POCN(20) TYPE C, "Prime Contract Number
X_TYPE(13) TYPE C, "Order Type Sarnoff
X_OPEN(10) TYPE C, "Open Date
X_CLOSE(10) TYPE C, "Close Date
X_CGT(4) TYPE C, "CO, GV, TC
X_DISTR(2) TYPE C, "Distribution Channel
X_CONTR(6) TYPE C, "Percentage contribution
X_AWRD(14) TYPE C, "Award (Plan 11)
X_P12R(14) TYPE C, "Auth Revenue (Plan 12 @ Rev)
X_P12C(14) TYPE C, "Auth Cost (Plan 12 @ Cost)
X_P13R(14) TYPE C, "Auth Revenue (Plan 13 @ Rev)
X_P13C(14) TYPE C, "Auth Cost (Plan 13 @ Cost)
X_ITDS(14) TYPE C, "ITD Sales
X_ITDC(14) TYPE C, "ITD Costs
X_YTDS(14) TYPE C, "YTD Sales
X_YTDC(14) TYPE C, "YTD Costs
X_MTHS(14) TYPE C, "Current Month Sales
X_MTHC(14) TYPE C, "Current Month Costs
X_ITDB(14) TYPE C, "ITD Billed Sales
X_YTDB(14) TYPE C, "YTD Billed Sales
X_MTHB(14) TYPE C, "Current Month Billed Sales
X_COMM(14) TYPE C, "Commitments
X_STAT(6) TYPE C, "Active or Inactive (REL, TECO, or CLSD)
X_ZPROJCLASS(12),
X_MTHIC(14) TYPE C, "Current Month Incremental Costs
X_YTDIC(14) TYPE C, "YTD Incremental Costs
X_ITDIC(14) TYPE C, "ITD Incremental Costs
X_ZSCURVE(10) TYPE C, "S-CURVE Status
New Added
X_CM_COST(20) TYPE C,
X_AM_COST(20) TYPE C,
X_TL_COST(20) TYPE C,
X_KP_COST(20) TYPE C,
X_PM_COST(20) TYPE C,
END OF EXDEF.
Data declarations
FIELD-SYMBOLS <MNT> .
DATA: ETAB TYPE EXDEF OCCURS 100 WITH HEADER LINE.
DATA: X1_PM_COST(20) TYPE C,
X1_TL_COST(20) TYPE C,
X1_AM_COST(20) TYPE C,
X1_CM_COST(20) TYPE C,
X1_KP_COST(20) TYPE C.
DATA: KOKRS_FIXED LIKE PROJ-VKOKR VALUE 'DSRC', "Controlling Area
TOTAL_AWARD LIKE BPGE-WTGES,
TOTAL_AUTHR12 LIKE BPGE-WTGES,
TOTAL_AUTHC12 LIKE BPGE-WTGES,
TOTAL_AUTHR13 LIKE BPGE-WTGES,
TOTAL_AUTHC13 LIKE BPGE-WTGES,
TOTAL_ITDSALES LIKE BPGE-WTGES,
TOTAL_ITDCOSTS LIKE BPGE-WTGES,
TOTAL_ITDICOSTS LIKE BPGE-WTGES,
TOTAL_YTDSALES LIKE BPGE-WTGES,
TOTAL_YTDCOSTS LIKE BPGE-WTGES,
TOTAL_YTDICOSTS LIKE BPGE-WTGES,
TOTAL_MTHSALES LIKE BPGE-WTGES,
TOTAL_MTHCOSTS LIKE BPGE-WTGES,
TOTAL_MTHICOSTS LIKE BPGE-WTGES,
TOTAL_ITDBILLED LIKE BPGE-WTGES,
TOTAL_YTDBILLED LIKE BPGE-WTGES,
TOTAL_MTHBILLED LIKE BPGE-WTGES,
TOTAL_COMMITMENT LIKE COOI-WTGBTR,
HOLD_PRART LIKE PRPS-PRART,
COUNT_PROJECTS TYPE I,
MNT_INDX(20) TYPE C,
HLD_INDX(3) TYPE N,
YYYY_MM(10) TYPE C,
TEMP-DATE(8) TYPE C.
Selection Screen
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN BEGIN OF BLOCK XEXTRPM WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS MONTH(2) TYPE N OBLIGATORY.
PARAMETERS YEAR(4) TYPE N OBLIGATORY.
SELECT-OPTIONS: EXTRPRJ FOR PROJ-PSPID. " Range of Projects
SELECT-OPTIONS: EXTRTYP FOR PRPS-PRART. "Project Types (CO,GV,etc.*)
SELECT-OPTIONS: EXTRPCTR FOR PROJ-PRCTR. " Range of Profit centers
SELECTION-SCREEN SKIP 2.
PARAMETERS: OPT1 RADIOBUTTON GROUP OPTN,
OPT2 RADIOBUTTON GROUP OPTN DEFAULT 'X'.
select-options : s_pc for proj-zprojclass. "project class
SELECTION-SCREEN END OF BLOCK XEXTRPM.
Select Tables
START-OF-SELECTION.
write: / 'Sales data (Unshared) extracted on: ', sy-datum.
uline.
CLEAR: COUNT_PROJECTS,
TOTAL_AWARD,
TOTAL_AUTHR12,
TOTAL_AUTHC12,
TOTAL_AUTHR13,
TOTAL_AUTHC13,
TOTAL_ITDSALES,
TOTAL_ITDCOSTS,
TOTAL_YTDSALES,
TOTAL_YTDCOSTS,
TOTAL_MTHSALES,
TOTAL_MTHCOSTS,
TOTAL_ITDBILLED,
TOTAL_YTDBILLED,
TOTAL_MTHBILLED,
TOTAL_COMMITMENT,
ETAB.
PROJ Table Project Definition
SELECT * FROM PROJ "Project Definition
WHERE PSPID IN EXTRPRJ AND " Range of Project Numbers
PRCTR IN EXTRPCTR and " Range of Profit center
zprojclass in s_pc. "project class
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP " Range of Proj.Types (CO,GV,TC..
and PSPHI = PROJ-PSPNR.
HOLD_PRART = ' '. "clears project type
CLEAR ETAB.
ETAB-X_PROJ = PRPS-POSID.
ETAB-X_BU = PRPS-PRCTR(2). "Business Unit
ETAB-X_PMGR = PROJ-VERNA. "Project Manager
IF PRPS-PRCTR(2) = '01'.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
CONCATENATE SPACE PRPS-PRCTR INTO ETAB-X_CNTR SEPARATED BY SPACE.
ELSE.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
ENDIF.
ETAB-X_TTLE = PRPS-POST1. "Title
CLEAR TEMP-DATE.
TEMP-DATE = PROJ-PLFAZ. "Project planned start date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_OPEN.
TEMP-DATE = PROJ-PLSEZ. "Project planned finish date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_CLOSE.
Tech Lead
will comment below
SELECT SINGLE VERNA FROM TCJ04 "Tech Lead name from TCJ04
INTO (ETAB-X_GRPH) WHERE VERNR = PROJ-ZGRPHD.
End Of Tech Lead
Account Manager
SELECT SINGLE VERNA FROM TCJ04 "Acct Manager from TCJ04
INTO (ETAB-X_BDREP) WHERE VERNR = PROJ-ZBUSDEV.
******End Of Account Manager
Key Personnel
SELECT SINGLE VERNA FROM TCJ04 "Account Rep name from TCJ04
INTO (ETAB-X_ACTREP) WHERE VERNR = PROJ-ZRESPDIR.
********End of Key Personnel
**Contract Manager
SELECT SINGLE VERNA FROM TCJ04 "Contract Rep name from TCJ04
INTO (ETAB-X_CREP) WHERE VERNR = PROJ-ZCNTREP.
End of Contract Manager
PRPS Table WBS's attached to the Project
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP "Range of Proj.Types (CO,GV,TC..
AND PSPHI = PROJ-PSPNR.
order by posid stufe. "Sort by WBS & Level (needed?)
get info from level 1 of the WBS
IF PRPS-STUFE EQ 1. "top-level WBS element
HOLD_PRART = PRPS-PRART. "save project type for later
ETAB-X_STAT = '????'. "set ? as the default status
get Status for level 1
SELECT * FROM JEST "use JEST to determine Status
WHERE OBJNR = PRPS-OBJNR
AND INACT EQ SPACE. "space denotes an active status
CASE JEST-STAT. "find the system status (Ixxx)
WHEN 'I0001'.
ETAB-X_STAT = 'CRTD'. "Created
WHEN 'I0002'.
ETAB-X_STAT = 'REL'. "Released
WHEN 'I0045'.
ETAB-X_STAT = 'TECO'. "Technically Complete
WHEN 'I0046'.
ETAB-X_STAT = 'CLSD'. "Closed
ENDCASE.
ENDSELECT.
Select only active projects (ie; those not with TECO or CLSD)
IF OPT2 EQ 'X'
AND ( ETAB-X_STAT EQ 'TECO'
OR ETAB-X_STAT EQ 'CLSD' ).
EXIT.
ENDIF.
*comment Contract Rep and Proj man because we get them from PROJ now
etab-x_crep = prps-zzcont. "Contract Rep.
etab-x_pmgr = prps-verna. "Program Manager Name
ETAB-X_CLNT = PRPS-ZZMANDT. "Client Name
ETAB-X_CGT = PRPS-PRART. "CO, GV, TC, etc
ETAB-X_DISTR = PRPS-ZZVTWEG. "Distrib Channel (ie; GP, etc.)
ETAB-X_CONTR = PRPS-USR04. "Contribution %
ETAB-X_POCN = PRPS-ZZPOCN. "Contract Number
ETAB-X_TYPE = PRPS-ZZORDT. "Order Type Sarnoff
Award and Authorization (Revenue & Cost)
SELECT * FROM BPGE
WHERE OBJNR = PRPS-OBJNR
AND LEDNR = '0001' "Budget / Planning Ledger
AND TRGKZ = 'N' "Object indicator
AND WRTTP = '01' "Value Type
AND ( VERSN = '011' "011 = Award
OR VERSN = '012' "012 = Billing Authorization
OR VERSN = '013' ). "013 = RA Authorization
"010 = Funding Authorization
Award Plan 11
IF BPGE-VERSN = '011'. "Plan 11 = Award
CASE BPGE-VORGA.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_AWRD = ETAB-X_AWRD + BPGE-WTGES.
ENDCASE.
ENDIF.
IF prps-stufe eq '2'.
Authorization (Revenue & Cost plan 12) Plan 12
IF BPGE-VERSN = '012'. "Plan 12 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P12R = ETAB-X_P12R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P12C = ETAB-X_P12C + BPGE-WTGES.
ENDCASE.
ENDIF.
Authorization (Revenue & Cost plan 13) Plan 13
IF BPGE-VERSN = '013'. "Plan 13 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P13R = ETAB-X_P13R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P13C = ETAB-X_P13C + BPGE-WTGES.
ENDCASE.
ENDIF.
endif.
ENDSELECT. "BPGE
ENDIF. "end of if prps-stufe eq 1. top-level WBS element
COSP Table (External Postings) Awards
COSP Table (External Postings) Billed Sales
COSP Table (External Postings) DPC's & Legacy Load
SELECT * FROM COSP
WHERE OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR
AND (
( kstar = '0000400999' and "old CE for Award $
( KSTAR BETWEEN '0000400990' AND '0000400999' AND
VERSN = '011' AND "11 = Award
WRTTP = '01' ) "01 = Planned
OR ( ( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
WRTTP = '04' ) "04 = Actuals
OR ( ( KSTAR BETWEEN '0000998001' AND '0000998010' OR
KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
WRTTP = '04' ) "04 = Actuals
*------- Awards
if cosp-kstar = '0000400999' and "old 400999 = Awards
IF COSP-KSTAR BETWEEN '0000400990' AND '0000400999' AND
COSP-VERSN = '011' AND "11 = Award
COSP-WRTTP = '01'. "01 = Planned
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_AWRD = ETAB-X_AWRD + <MNT>.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_AWRD = ETAB-X_AWRD +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Billed Sales
IF ( COSP-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSP-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSP-WRTTP = '04'.
"0000999001 = ITD Sales
"0000999003 = ITD Billed Revenue
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSP-WKG001 - COSP-WKG002 -
COSP-WKG003 - COSP-WKG004 -
COSP-WKG005 - COSP-WKG006 -
COSP-WKG007 - COSP-WKG008 -
COSP-WKG009 - COSP-WKG010 -
COSP-WKG011 - COSP-WKG012 -
COSP-WKG013 - COSP-WKG014 -
COSP-WKG015 - COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- DPC's & Legacy Load
IF ( COSP-KSTAR BETWEEN '0000998001' AND '0000998010' OR
COSP-KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
COSP-WRTTP = '04'.
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COOI Table (Commitments) commitments for the WBS elements
SELECT * FROM COOI
WHERE OBJNR = PRPS-OBJNR.
ETAB-X_COMM = ETAB-X_COMM + COOI-WTGBTR.
ENDSELECT.
COSS Table (External Postings) G&A on Commitments
COSS Table (External Postings) Shared Billed Sales
COSS Table (External Postings) Shared DPC's
COSS Table (External Postings) Salary,ESE,OH, & G&A
SELECT * FROM COSS
WHERE
( OBJNR = PRPS-OBJNR AND
WRTTP = '22' ) "G&A on Commitments
OR
( OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR AND
WRTTP = '04' AND "04 = Actuals
( "Shared Billed Sales
( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' )
OR "Shared DPC's
( KSTAR BETWEEN '0000600001' AND '0000601999' )
OR "Salary,ESE,OH, & G&A
( ( KSTAR BETWEEN '0000001000' AND '0000001999' OR
KSTAR BETWEEN '0000002100' AND '0000002199' OR
KSTAR BETWEEN '0000002500' AND '0000002599' OR
KSTAR BETWEEN '0000002800' AND '0000002899' ) )
and parob not like 'PR%' ) "commented out on 4/19/2000
*------- G&A on Commitments (NOTE: data is always as of the RUN date)
IF COSS-WRTTP = '22'.
ETAB-X_COMM = ETAB-X_COMM +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ENDIF.
*------- Shared Billed Sales
IF ( COSS-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSS-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSS-WKG001 - COSS-WKG002 -
COSS-WKG003 - COSS-WKG004 -
COSS-WKG005 - COSS-WKG006 -
COSS-WKG007 - COSS-WKG008 -
COSS-WKG009 - COSS-WKG010 -
COSS-WKG011 - COSS-WKG012 -
COSS-WKG013 - COSS-WKG014 -
COSS-WKG015 - COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Shared DPC's
IF COSS-KSTAR BETWEEN '0000600001' AND '0000601999' AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Salary,ESE,OH,& G&A
IF ( COSS-KSTAR BETWEEN '0000001000' AND '0000001999' OR
COSS-KSTAR BETWEEN '0000002100' AND '0000002199' OR
COSS-KSTAR BETWEEN '0000002500' AND '0000002599' OR
COSS-KSTAR BETWEEN '0000002800' AND '0000002899' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COSB Table (Results from running RA) Unbilled Sales
SELECT * FROM COSB
WHERE OBJNR = PRPS-OBJNR
AND KSTAR BETWEEN '0000003004' AND '0000003005'
"0000003004 = Unbilled Revenue
"0000003005 = Unearned Revenue
AND GJAHR LE YEAR
AND WRTTP = '32'. "32 = Results Analysis
IF YEAR = COSB-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSB-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDS = ETAB-X_ITDS - <MNT>.
ETAB-X_YTDS = ETAB-X_YTDS - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHS = ETAB-X_MTHS - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSB-GJAHR.
ETAB-X_ITDS = ETAB-X_ITDS -
COSB-WKG001 - COSB-WKG002 -
COSB-WKG003 - COSB-WKG004 -
COSB-WKG005 - COSB-WKG006 -
COSB-WKG007 - COSB-WKG008 -
COSB-WKG009 - COSB-WKG010 -
COSB-WKG011 - COSB-WKG012 -
COSB-WKG013 - COSB-WKG014 -
COSB-WKG015 - COSB-WKG016.
ELSE.
EXIT.
ENDIF.
ENDSELECT.
ENDSELECT. "End of WBS records (from PRPS) for project
Get Total Sales by adding Billed Sales to Unbilled Sales.
ETAB-X_ITDS = ETAB-X_ITDS + ETAB-X_ITDB.
ETAB-X_YTDS = ETAB-X_YTDS + ETAB-X_YTDB.
ETAB-X_MTHS = ETAB-X_MTHS + ETAB-X_MTHB.
IF HOLD_PRART IN EXTRTYP. "Matches the user requested project type
IF OPT1 EQ 'X' OR "All projects
( OPT2 EQ 'X' AND "Only active projects
ETAB-X_STAT NE 'TECO' AND
ETAB-X_STAT NE 'CLSD' ).
TOTAL_AWARD = TOTAL_AWARD + ETAB-X_AWRD.
TOTAL_AUTHR12 = TOTAL_AUTHR12 + ETAB-X_P12R .
TOTAL_AUTHC12 = TOTAL_AUTHC12 + ETAB-X_P12C.
TOTAL_AUTHR13 = TOTAL_AUTHR13 + ETAB-X_P13R.
TOTAL_AUTHC13 = TOTAL_AUTHC13 + ETAB-X_P13C.
TOTAL_ITDSALES = TOTAL_ITDSALES + ETAB-X_ITDS.
TOTAL_ITDCOSTS = TOTAL_ITDCOSTS + ETAB-X_ITDC.
TOTAL_YTDSALES = TOTAL_YTDSALES + ETAB-X_YTDS.
TOTAL_YTDCOSTS = TOTAL_YTDCOSTS + ETAB-X_YTDC.
TOTAL_MTHSALES = TOTAL_MTHSALES + ETAB-X_MTHS.
TOTAL_MTHCOSTS = TOTAL_MTHCOSTS + ETAB-X_MTHC.
TOTAL_ITDBILLED = TOTAL_ITDBILLED + ETAB-X_ITDB.
TOTAL_YTDBILLED = TOTAL_YTDBILLED + ETAB-X_YTDB.
TOTAL_MTHBILLED = TOTAL_MTHBILLED + ETAB-X_MTHB.
TOTAL_COMMITMENT = TOTAL_COMMITMENT + ETAB-X_COMM.
PERFORM SHIFT_SIGN.
APPEND ETAB. "Write data to internal table
CLEAR ETAB.
COUNT_PROJECTS = COUNT_PROJECTS + 1. "Count # of Projects
ENDIF.
ENDIF.
ENDSELECT.
ENDSELECT. "End of Projects from PROJ table
PERFORM GRAND_TOTALS.
SORT ETAB BY X_BU X_PROJ.
ETAB-X_BU = 'BU'.
ETAB-X_CNTR = 'PrftCntr'.
ETAB-X_PROJ = 'Proj'.
ETAB-X_CREP = 'Contract Mgr'.
ETAB-X_BDREP = 'Account Mgr'.
ETAB-X_GRPH = 'Technical Lead'.
ETAB-X_ACTREP = 'Key Person1'.
ETAB-X_PMGR = 'Program Mgr'.
ETAB-X_TTLE = 'Title'.
ETAB-X_CLNT = 'Client'.
ETAB-X_POCN = 'Contract #'.
ETAB-X_TYPE = 'Type'.
ETAB-X_OPEN = 'Open'.
ETAB-X_CLOSE = 'Close'.
ETAB-X_CGT = 'CGT'.
ETAB-X_DISTR = 'DC'.
ETAB-X_CONTR = 'Contr%'.
ETAB-X_AWRD = 'Award'.
ETAB-X_P12R = 'Auth12 Sales'.
ETAB-X_P12C = 'Auth12 Cost'.
ETAB-X_P13R = 'Auth13 Sales'.
ETAB-X_P13C = 'Auth13 Cost'.
ETAB-X_ITDS = 'ITD Sales'.
ETAB-X_ITDC = 'ITD Costs'.
ETAB-X_YTDS = 'YTD Sales'.
ETAB-X_YTDC = 'YTD Costs'.
ETAB-X_MTHS = 'Mth Sales'.
ETAB-X_MTHC = 'Mth Costs'.
ETAB-X_ITDB = 'ITD Billed'.
ETAB-X_YTDB = 'YTD Billed'.
ETAB-X_MTHB = 'Mth Billed'.
ETAB-X_COMM = 'Commitments'.
ETAB-X_STAT = 'Status'.
INSERT ETAB INDEX 1. "Write a report header line to internal table
CLEAR ETAB.
CALL FUNCTION 'Z_RH_START_EXCEL_DATA_OLE'
EXPORTING
data_name = 'C:\WINNT\Profiles\cbraswell\Desktop\TestTemp.xlt'
DATA_NAME = 'ZSales.XLS'
DATA_PATH_FLAG = 'W'
DATA_TYPE = 'DAT'
DATA_BIN_FILE_SIZE = 'ZSales'
CHART_TITLE = 'ZSales'
CHART_TYPE = 2
CATEGORY_TITLE = 'ZSales'
VALUE_TITLE = 'ZSales'
DATA_XTOP_COR = 0
DATA_YTOP_COR = 0
DATA_XBOT_COR = 0
DATA_YBOT_COR = 0
CATEGORY_XTOP_COR = 0
CATEGORY_YTOP_COR = 0
CATEGORY_XBOT_COR = 0
CATEGORY_YBOT_COR = 0
TABLES
DATA_TAB = ETAB
EXCEPTIONS
NO_BATCH = 1
DOWNLOAD_ERROR = 2
INVALID_TYPE = 3
INTERNAL_ERROR = 4
NO_OLE_SUPPORT = 5
OLE_FILE_ERROR = 6
OLE_ERROR = 7
NO_DATA = 8
COORDINATE_ERROR = 9
OTHERS = 10.
Negative # sign in the front of number for downloading to Excel
FORM SHIFT_SIGN.
IF ETAB-X_AWRD CA '-'. SHIFT ETAB-X_AWRD RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12R CA '-'. SHIFT ETAB-X_P12R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12C CA '-'. SHIFT ETAB-X_P12C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13R CA '-'. SHIFT ETAB-X_P13R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13C CA '-'. SHIFT ETAB-X_P13C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDS CA '-'. SHIFT ETAB-X_ITDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDIC CA '-'. SHIFT ETAB-X_ITDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDC CA '-'. SHIFT ETAB-X_ITDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDS CA '-'. SHIFT ETAB-X_YTDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDC CA '-'. SHIFT ETAB-X_YTDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDIC CA '-'. SHIFT ETAB-X_YTDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHS CA '-'. SHIFT ETAB-X_MTHS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHC CA '-'. SHIFT ETAB-X_MTHC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHIC CA '-'. SHIFT ETAB-X_MTHIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDB CA '-'. SHIFT ETAB-X_ITDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDB CA '-'. SHIFT ETAB-X_YTDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHB CA '-'. SHIFT ETAB-X_MTHB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_COMM CA '-'. SHIFT ETAB-X_COMM RIGHT CIRCULAR. ENDIF.
ENDFORM.
FORM GRAND_TOTALS.
SKIP 1. .
WRITE: / '----
WRITE: / 'System ID = ', SY-SYSID,
/ 'Client = ', SY-MANDT,
/ 'User = ', SY-UNAME,
/ 'Date of data extract = ', SY-DATUM ,
/ 'Number of Projects = ', COUNT_PROJECTS,
/ 'total Award (Plan 11) = ', TOTAL_AWARD,
/ 'total Auth SalesHi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks -
Please urgent help needed for the following
Hi Everybody!
I desperately need help as soon as possible.
Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two or three posts in this forum.
1- Now data input by the user in the specific field( name, rate ) should be displayed in the �List� at the top of the frame after pressing �Enter� key. Can anyone help me to achieve this functionality. While doing this keep in mind the capacity of Array
2- I also need �rate� textfield to enabled initially & become disable when �raise� (for trigerring calculating raise in weekly pay) is checked. On this �increased� textbox will become �enabled� which was disabled initially.
3- The stuff which may have the problems is followed by �*******************�.
// here is how I declared handlers
ActionEventHandler handler = new ActionEventHandler();
ItemEventHandler listener = new ItemEventHandler();
// here is the declaration of awt components which are going to be placed on Frame.
public class ActionEventHandler implements ActionListener
public void actionPerformed(ActionEvent event)
//if(event.getSource() == enterButton)
for (int i = 0 ; i < empArray.length; i++)
if(event.getSource() == enterButton)
empData.add(nameField.getText());
/*else if(event.getSource() == hoursField)
calcWeeklyPay();
if(event.getSource() == clearButton)
nameField.setText("");
hoursField.setText("");
rateField.setText("");
increaseField.setText("");
}//else if
}//ActionEventHandler
public class ItemEventHandler implements ItemListener
public void itemStateChanged(ItemEvent event)
//if(event.getSource() == enterButton)
if(hEmployee.getState())
createHourly();
}//if
/*else
sEmployee.setState(true);
createSalaried();
}//else*/
else if(raiseSal.getState())
increaseField.setEnabled(true);
rateField.setEnabled(false);
}//itemStateChanged
}//ItemEventHandler
public void createHourly()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
//empData.add(emp.toString());
enterButton.setLabel("add");
}//createHourly
/* public void createSalaried()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
enterButton = new Button("add");
}//createSalaried*/
looking forward your kindnessVisit YAT-Yet Another Thread this is a discussion using the Sun book Core Java 2
and one part in that book uses an example with Employee class of which I assume you are stealing your class-name from. Anyway, that thread is in the Java forums. -
Help needed on the logic used to display ERP Sales order in CRM WEB UI
Hi,
I have a requirement where i need to trigger an activity/workflow in CRM for orders that are created through ERP Salesorder functionality. In the workflow list, we need to give the order description and provide an hyperlink to the order number. on selection of order number, it should display the ERP sales order. To achive this in workflow, i am trying to understand the as-is standard functionality which is available in Agent Inbox search on ERP sales order.This search is getting the ERP orders and on selecting the order it is opening the ERO sales order page. I tried debugging the method GET_MAINCATAEGORY available in the component iccmp_inbox and in the view Inboxsearch.But couldnt really able to crack the logic how it is retrieving the ERP sales order from inbox search. Any pointers on how this is achieved will be of great help.
Thanks,
UdayaHi Denis,
very good idea. I thougt myself about that workaround, but it is not really that for what I searched.
I mean the "SAP Query" is a really good standard tool, that are used by many customers. That is why think there must be a standard way to display the SAP Query in the Web UI without using Transaction Launcher.
But it seems that there is no way, except of the transaction launcher or by using an additional analyse system like SAP BI.
By the way do you know a Web UI compoment which enable the user to start reports like SE38?
Regards
Fabian -
Help needed regarding the client server communication
this is regarding my networking project which at present i am doing it in java...
the project is abt establishing a server in my lab that controls all the other systems in that lab... now the problem is i have to shut down all the systems in the lab from the server on a click of a button.... this i need to do using socket programming to which i am new....
So can anyone pls send me a sample code as to how to pass a command from server to shut shut down all the systems(clients) ..i need a java program that uses sockets concept to perform the above mentioned operation...pls note i am trying to establish a linux server
regards
lalitaDear hiwa
i can use it but the constraint in my project is to use only the Socket programming due to time lacks.... i have to find a faster way to communicate between the server and the client...
can u pls help me find a solution for this via sockets...
hoping a favorable response
regards
Lalita -
Help needed regarding the deployment architecture for PROD env
Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and RegardsHi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein
Maybe you are looking for
-
ITunes deleted all my apps after I clicked "Cancel" to sync apps
I'm at work and I wanted to do some serious app re-arranging. Rather than doing it manually on my iPhone5, I luanched iTunes. Note: I do *not* sync my iPhone with my work computer, but I thought maybe it could still rearrange the apps since I can s
-
Using SharePoint 2013; Is there an option out of the box to personalize Web Part Zone like we have for Web Parts. We have a requirement to create a Web Part page in which users can personalize by adding the Web Parts they wanted to see. Scenario: Use
-
Illustrator files crash Fireworks
I just got started with Fireworks CS3, installed yesterday for the first time. I'm trying to open Illustrator files but Fireworks crashes every time. Installation went smoothly, I unistalled and reinstalled just to be sure. But, no luck, I can't open
-
Is there a way to add your own book created by "iBooks Author" that is NOT published yet? This is with iBooks on the Mac (OS Mavericks) thanks in advance Rohit
-
What is the Average video creating time for a 3min video on my Mac Air using iMovie?
I have a MId 2013 MacBook Air and it is taking forever for iMovie to Process a 3 min video Vlog... Is this normal? Thank Guys