Perfect Preview in Muse, non-functional on the web

I needed to have a video play automatically on a homepage, and found only an HTML5 command could accomplish this.
So, the snippet:
<video controls autoplay>
<source src="source.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
When replacing the "source.mp4" with the URL of the video, hosted on the given site, a box of the correct dimensions shows up in Muse, and useing Muse Preview, the clip plays fine. Perfect.
Next, when using Muse to post the site on the web, it does without error... sort of...
On the web, the page with the snippet is dead. Checking the existence of the file with an FTP utility, all is as it should be. Yet the video is claimed NOT to be present according to the browser. This means that Muse has changed the HTML snippet in its own special way to deny its use on the web.
At ALL times the correct URL was used to the video. No local file was used.
Next, I place a generic page up with a JPG and all was well.
THEN, I went back into Muse, and find that AFTER the upload to the site, the program itself has changed permissions and disallows the snippet to even be applied to a page, UNABLE to read the online content.
Perplexed, I uploaded a fresh copy of the video to one of my own sites, and checked for the file to play. It does in the browser. Valid URL. Substituting a known good URL for the video into the snippet of HTML in MUSE... Muse ITSELF cannot find the known good video file on my own site. It has been inoculated against this.
So, Muse, perhaps in deference to the Web axiom that autoplay videos should not be on a page (even ones under 2MB and 10 seconds in length, after allowing up to 1080p versions of a video early in the day (checked that too)) changed EVERYTHING about how the program works AFTER uploading a site.
Great.

Especially on GoDaddy that is almost always a caching issue with your browser. Try clearing your browser cache and close thebrowser and restart it. There isn't anything in Muse that causes this issue.

Similar Messages

Integrated Planning: Planning Functions in the Web - Issues with Binding

Hi
We are on SPS 11 and are having some difficulties getting our Planning Functions to execute corerctly in the web templates.
I have created a simple planning function that performs a distribution.
The Planning Function works as expected using the plannning wizard and ristricts the data based on the Filter that I have created on the Aggregation Level as well as the Planning Function Selections.
I have created a query and web template that contains the same restriction as the filter in my aggregation level. The Agg Level filter / planning function and Query Filter all contain the Hierarchy Node Variable ZN_CC1 for the standard Cost Center Hierarchy.
I have created the following 4 Planning Buttons to test the execution of the Planning Function in the Web:
1. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1.
2. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Variable Input String Default ZN_CC1, Planning Function ZDistrib1.
3. Planning Function Simple. Binding ref to the DP_1 (Query), Variable = Hierarchy Variable ZN_CC1, Planning Function ZDistrib1. Display variable property selected.
4. Planning Function Simple. Binding ref to the DP_1 (Query), Cost Center Characteristic Data Provider Selection Default, Planning Function ZDistrib1.
When the query is executed and a node representing a group in the hierarchy is selected the query is executed and is input ready for the selected group. This is a subset of the hierarchy.
When the above planning fucntions are executed the following results display.
1. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
2. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value.
3. The variable popup displays and a hierarchy node is selected. The planning function is executed however it is not restricted to the selection based on the hierarhcy variable node selected by the user. The planning function is executed for the entrire hierarchy. It is not restricted by the cost center hierarchy node variable value, that was entered when prompted.
4. The planning function is executed however it is not restricted to the cost center selection based on the query DP1. The planning function is not restricted by the cost center selections.
HOWEVER,
If I goto to the filter web item and edit the cost center filter by selecting and adding all available cost centers to the filter. (This list of cost centers is restricted to the cost centers subordinate to the hierarhcy node selected in the variable)
When the above the planning functions are executed the function is now restricted to the cost centers added to the filter as explained above.
If anyone has had a similar issue with Planning Functions executing for data outside of the Dataprovider Selections I would be interested to know how you managed to get the planning function to retrict to the DP Selections that include hierarchy node variables.
If anyone from SAP can comment before I raise this as an OSS issue it would be much appreciated.
Thanks in advance.
Ian

Hi
Just wondering if this is the correct forum to post BI IP questions?
Any comments if this the right forum.
Thanks
Ian

Enable the "calling WebIDL constructors as functions" on the web

Hi,
I am developing a web application using php and python. After updating the Firefox to the latest version 30.0, some functions on my app do not work anymore. I checked the change logs of Firefox and found out this change: "Disallow calling WebIDL constructors as functions on the web" caused the issue on my tool.
So how can I fix this on the browser side since I cannot change the codes immediately right now?
Also a suggestion: Please reverse this change on the next update of this browser since this will affect my users or else I have to greatly change the codes.
Thanks

Please check out where this is fixed and the Site Compatibility list in the last portion of the bug [https://bugzilla.mozilla.org/show_bug.cgi?id=916644]

Site works in preview but not when uploaded to the web

I have been trying to add a link from my website to another project I have been doing, a mini site made with Flash.
I wanted the link to open up a new window with the animation playing inside, and it works perfectly when I use "preview in safari" within dreamweaver, but now I've uploaded to the web it just opens up a blank window.
This is the url for the homepage:
http://kayleighthompson.com/
and the link is the ActiveAid button at the bottom of the navigation list.
If anyone knows how to get this working I'd be very grateful! It's for a uni project due in this afternoon :S

I think you may be having a problem with how Flash is displayed. The Flash on the first page doesn't display in IE8... although it does in Chrome. The second page doesn't display in either. Your link is correct. I checked that.
Wish I could be more helpful, I'm having the same issue with IE and DW CS4 myself, and can't figure it out.
This may help: http://code.google.com/p/swfobject/wiki/documentation
Good luck! Let me know if you figure it out.
[email protected]

How to configure Goto context menu function on the web?

We are running a web template on IE browser. After the report run successfully, left click on any key figure column, we can see Goto context menu, from here, we can go to detailed report (e.g. from the current Cube level to more detailed ODS level). However we find this jump from cube level to ODS level (Goto context manu) works on our QA system other than DEV system.
These stuff were configured by SAP consultants who left our company one year ago, if anyone knows how to make the Goto context menu works by drilling down from cube level to ODS level, please let us know and we are really appreciated!

dear Bhanu,
We figured out the problem, it is because we click Goto then select "Display Documents" which yields a 400 error, then go back to click Goto, pick up the target link we want and it yield the error. After we hit F5 to reload the URL link, then directly select Goto our target, then it works fine!
But one more question, under Goto context menu, we find four menu context items:
1. Display Documents
2. Documents for Navigation Status
3. Our application target1
4. Our application target2
Select option 1 yields an error like mentioned above.
Select option 2 pops up a new window with Key Figure selection box and a button called "Additional Functions", but seems go nowhere.
Option 3 is setup in our system by using RSBBS like you suggested.
Option 4 is not in RSBBS.
Then our questions are for option 1, 2, and 4. What are the functionalities of option 1 and 2, are these two standard web functionalities of BW web reports? and these two options always show up on the web no matter whether they work or not, right? We are confused with option 4, it's not listed in RSBBS, then how come it show up?

Where do I send a long list of problems I have with non-functionality with the Lion OSX and new Safari for Lion.

In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.

bigbookjoe wrote:
In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.
http://www.apple.com/feedback/macosx.html

"transaction variant" functionality in the Web Client

I'm opening this message for a customer this message is a consulting...
Thanks in advance,
Daniel Kaoro Kobashigawa
In the SAP GUI we have Transactions that use transaction variants. For example we have ZBUP1A that is based upon BUP1. It uses a transaction variant to default certain important fields like "Grouping" "BP Type" etc. so BP are created correctly.
We are in the process of CRM 2007 upgrade from CRM 5.0 and plan to use CRM WebClient UI for all user transactions.
1. Can we put to use the same Transaction variants for the CRM WebClient UI without using the Transaction Launcher to call the GUI transactions (as SAP does-not recommend the use of SAP GUI Transactions except for
administrative related functions)? If so is it just configuration?
2. If we cannot use the Transaction variants for the CRM WebClient UI, is there a way to pass parameters to the standard transactions by making modifications to the logical links provided in the Navigation Bar? If so, please elaborate.

Discarded question

Error 43 when accessing LabVIEW 2009 write/read file functions through the web server functionality

Is there any way around to avoid Error 43, "Operation cancelled by user" when using Web server?
I am using the example VI:s RemotePanelMethods-Server.vi and RemotePanelMethods-Client.vi to acces the MainGUI.vi from my workstation to a lab computer. * LabVIEW 2009 is installed in both machines.
* MainGUI.vi is wired to the VI access list in the Server VI but it also contains a hierarchy below that isn't, is this a problem?
* Several functions in MainGUI calls file read and write operations
The problem ocurrs when file read/write operations with no preselected path are selected through the Client. The traditional popup window requesting the file to read or write is never seen in the Client, but only the Error 43.
Thanks in advance

See this

About BPS Automatically executed function before the WEB display.

First i has already create the layout and parameter group and assigned the parameter group in "automatically plng funct." of layout.
i want to execute the parameter group before the layout display in web set.
but it never do it. help me please!

The configuration you have maintained has no influence in Web. Take a look at how to document "How to Run Planning Sequences on Save and Other Events -WEB.pdf". There you can find detail step by step guide. Good luck!

GL: Import Journal only accept those non-functional currency

Hi,
I have tried to run import journal using Oracle General Ledger. However, I found that there is always an error 'EC08 - Invalid currency code' when the records contains functional currency code, e.g. HKD. For all other currencies, like JPY, i.e. non-functional currency, the import journal can then be completed successfully. Kindly please explain how to import journal successfully from the data containing the functional currency, like HKD in the Oracle General Ledger module. Many Thanks.
Please e-mail answer to [email protected]
Thanks in advance.

Hi,
I have tried to run import journal using Oracle General Ledger. However, I found that there is always an error 'EC08 - Invalid currency code' when the records contains functional currency code, e.g. HKD. For all other currencies, like JPY, i.e. non-functional currency, the import journal can then be completed successfully. Kindly please explain how to import journal successfully from the data containing the functional currency, like HKD in the Oracle General Ledger module. Many Thanks.
Please e-mail answer to [email protected]
Thanks in advance.

Non functioning system

Purchased a KT3 Ultra2 after reading good reviews. Replaced old Chaintech CT-7AJA motherboard. Fitted new 512MB DDR memory module (PC2100). Reconnected all devices etc. Switched on power. Front panel power LED came on. Hard drive LED came on for 20 seconds. Then nothing. No screen activity at all. No P.O.S.T. messages on screen. Put a floppy disk in the floppy drive. Floppy light did not come on after a reboot. Tried booting without memory module and beeping sounds heard. Replaced memory, still non functioning system. Put old mother board back. Every thing works fine. Took board back to PC World who replaced it. Tried again. Still non functioning. The problem is not my processor as it still works fine on old motherboard. (Removed sticky label from your socket A socket and used special cooling compound on heatsink).Problem is not my devices as they work fine on the old board.
Has anyone else ever had this problem?
It doesn't seem logical.
Any suggestions appreciated.

Quote
Originally posted by wonkanoby
you are going to have to format the drive and reload
Why?? It is not even posting so it has nothing to do with OS problems. Yet. Even so I can't see any reason to format and reinstall an OS just because you have a new MB. Driver conflicts can be sorted out in safe mode.
To Geoffery, What are your PSU current ratings for 3.3V and 5V rails? Are you positive you have your heatsink around the right way? Machined slot must go over the raised portion of the CPU socket.

Currency Translation at the Web Template level (standard functionality)

Hi Experts ,
We are currently working in BI 7.0 env. with source system ECC 5.0.
We are working for a task where we need to make the BEx queries enabled for currency translation .
The requirement is :-
The user should be enable to give/opt/choose for the follwoing options:-
Currency type (target currency in which the translation is aimed)
Exchange Rate ( Standard(M) or other(P) or something else) and
Key date: The translation will be performed taking the exchange rate on that particular date.
We do have 2 option to perform the task...
1:- Either we do it thru currency translation type definition(RSCUR) and then attaching this currency translation for every amount key figure values at each query level. OR
2:- If we can go and find something at the Web Template level and add/modify the template in such a way so that it gives us the functionality to translate a source currency into a desired one with desired exchange rate type (currently either M or P) and for a specific date.
At this point of time when we do have numerous sub-areas holding hundreds of queries, we want something which should be available as the modification/addition to standard functionality at the web template level and not at the query level as changing each and every one of them and testing would be a cumbersome process and would be costly and risky at the same time. So we are just wondering if we can find something with option no. 2 and add/modify something in the standard functionality.
Please ask for any more information required.
Thanks very much.
regds.

Hi Amit,
You would still need to define the Currency Translation using RSCUR where you would specify
-the exchange rate type (either fixed or variable)
-the target currency (either fixed or variable)
-the reference date
You don't need to modify any of your queries. You can instead use 'Translate Currency'/[SET_CURRENCY_TRANSLATION] command in WAD & specify the Currency Translation as defined in RSCUR. If you want the target currency & exchange rate type to be driven by user input, you can define these as variables in RSCUR & invoke the variable screen using 'OPEN_VARIABLE_DIALOG' in WAD for user input just before calling 'SET_CURRENCY_TRANSLATION' command.
--Priya

Preview Browser looks great, but it's a mess on the web

Hello,
I'm a novice dreamweaver girl, and just uploaded my site. I
did it with a template I designed, and when I preview it in
dreamweaver using firefox or internet explorer, it looks how I
hoped it would. But when I type in the url, the site is not at all
what it looks like in the preview. For example, in the preview, I
have a widget menu that's small and on the left side, but on the
web, the menu goes horizontally across the whole screen. Also, in
the preview, there are photos going down the right side of the
page, but on the web, the photos and the text come one after
another, with large amounts of space.
My basic questions are:
1. What am I doing wrong?
2. Why does the preview look okay and different from the web?
3. Does this have something to do with the template I used?
Thanks! Any advice would be appreciated!

Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aquadiva" <[email protected]> wrote in
message
news:ftg8i0$930$[email protected]..
> Hello,
> I'm a novice dreamweaver girl, and just uploaded my
site. I did it with a
> template I designed, and when I preview it in
dreamweaver using firefox or
> internet explorer, it looks how I hoped it would. But
when I type in the
> url,
> the site is not at all what it looks like in the
preview. For example, in
> the
> preview, I have a widget menu that's small and on the
left side, but on
> the
> web, the menu goes horizontally across the whole screen.
Also, in the
> preview,
> there are photos going down the right side of the page,
but on the web,
> the
> photos and the text come one after another, with large
amounts of space.
> My basic questions are:
> 1. What am I doing wrong?
> 2. Why does the preview look okay and different from the
web?
> 3. Does this have something to do with the template I
used?
>
> Thanks! Any advice would be appreciated!
>

Help - How to get our PF keys working on the web?

We just successfully built a 9iAS server on a W2K platform - it was quick, easy and works perfectly with simple FORMS. However, the main FORM product we want to move from client/server to the web uses function keys -i.e F8, and these just don't function in the web environment. We've checked all the documention, even ghoing back to OAS and WebDB manuals, with no luck.
Apparently we've missed something in the 9iAS setup, or need something else on the client. THe clients run IE5.x, with the latest Microsoft VM package that shows Java COnsole.
Any help would be greatly appreciated.
Thanks,
Richard Staron

look for FMRWEB.RES in your server is the key definition file for WEBFORMS

Why is the web service cannot be invoked?

Hi Experts,
Scenario: I have created a web service from a function module from SAP CRM using SOAMANAGER. I wish to invoke this web service from Data Services.
I have tried to invoke the web service using the 2 types of data store avaible in Data Services:
- One Web Service datastore
- One Adapter datastore
Both have the same WSDL URL and I see the defintion of the web service in both. Fine.
I created 2 dataflows:
- One invoking the function from the Web Service datastore
- One invoking the function from the Adapter datastore
When I execute the batch job, I get different errors in the 2 dataflows, but the root cause seems to be the same: it cannot access and execute the web service.
- In the dataflow using the function from the Web Service data store, I get the error RUN-248005 There is no response for thte web service. Ensure that the network, web server, and service are running properly. Also ensure that the service call time out is set properly
- In the dataflow using the function from the Adaptor data store, I get the error RUN-058110 Error calling function. Web Service client unable to invoke Web Service Server. Error: (0)null
I have checked the Data Integrator documentation and nothing is mentioned on what is a proper time out setting.
I have followed the white paper of Michael Eaton [Building Data Integrator Real Time Jobs and Calling Web Services|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08?quicklink=index&overridelayout=true]. Nothing is mentioned in there in regards of special configuration. Yet, my scenario is a bit different here as I am using and external web service and not a published web service from Data Services.
Is there some Data Services configuration missing here? The web service is not secure: it as the lowest level of security, which is NONE! :).
What am I am missing :(?
Thanks a lot & Best Regards
Isabelle

Hi Manoj,
Thanks for the tip, unfortunately it still doesn't work.
I had posted a thread to the web service forum [Re: How to get the http.proxyHost and http.proxyPort?;. I was given the tip to invoke the web service using SOAP UI ([www.soapui.org]). I was able to invoke my web service and execute the service successfully! That's one win!
Yet, in DS it still doesn't work :(. I have:
- Added the Dhttp.proxyHost and Dhttp.proxyPort in the Additional Java Launcher Options in DS Management Console. I am not sure I have the right ones though. I think I might have the wrong values. I will recheck. Yet, when using SOAP UI, I don't need it so I am wondering why DS needs this.
- I have added the user/password in the adaptor datastore where the WSDL is specified.
I couldn't find any documentation related to the possible options for Additional Java Launcher Options. Where is this documented?
Thanks for your help & Best Regards
Isabelle

Perfect Preview in Muse, non-functional on the web

Similar Messages

Maybe you are looking for