Performance Monitor Communications Errors
Hi,
I'm setting up the Performance Monitor and I'm running into a couple of problems. I believe I set up both the monitoring and monitored systems correctly. Running Oracle 10g database and PeopleSoft 9.1/PeopleTools 8.5 on Windows Server 2008.
In the PSPPMSRV log on the monitoring system I get the following messages:
New PPMI URL. Starting Registration sequence
Collator registered with the Monitoring Server
Invalid PPMI session response received from Monitoring Server. Collator registering again (209, 57).
From the first message it would seem that things are registering correctly but then there is some communications break down.
In the PSAPPSRV log on the monitored system I get the following messages:
(PerfMon Agent) Registered succesfully ID:1
(PerfMon Agent) Registered succesfully ID:6
(PerfMon Agent) Registered succesfully ID:3
(PerfMon Agent) Communication to Monitor Servlet failed. Ethier the Performance Monitor URL is invalid or the Performance Monitor Webserver is unavailable. Exception: java.io.IOException: Invalid response code from server: 404 monitor not activated.
Once again it seems like they are registering properly. I have entered the correct PerfMon URL and can ping it succesfully and the webserver is up. I was reading the PeopleBooks and it suggested setting the keep-alive value on the webserver to 660 or greater. I could only enter and max of ~360; the PIA service would not start up when the value was greater than 360. Does anyone have any ideas on what I'm doing wrong and how to correct it?
Thanks in advance...
http://download.oracle.com/docs/cd/E15645_01/pt850pbr0/eng/psbooks/tpfm/book.htm?File=tpfm/htm/tpfm03.htm#_39c5bdcb_1257567a22c__7f77
Note. If you notice communication errors in the log files, even though the agents have registered successfully, check the keep-alive setting on the monitoring web server. The keep-alive timeout in the monitoring web server may need to be increased to 660 or higher to resolve these issues. After changing this setting, restart the web server.
I am using WebLogic 11g. Also, the maximum keep alive for http is 300 seconds while the maximum keep alive for https is 360 seconds.
Yeah I saw that document as well as the other document specific to 8.49+ (Doc ID 660971.1). I am producing the same log messages as described in the Doc 660971.1. I find it interesting that Doc 659371.1 recommends increasing Keep Alive while Doc 660971.1 says to turn it off.
Both documents say a solution is targeted for 8.50, but it seems that I am still producing the same errors. Has anyone else experienced the same problem?
Similar Messages
-
Active failed. Communication error when performing integrations.
I actived an activity but the request failed. In the request log,the last rows indicated the reason,but I can't understand and don't know how to solve it. Below show the last rows of the log:
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. HTTP protocol error [reason: Parsing of the response body failed [reason: Comment must start with "<!--".]]. Request FAILED.
REQUEST PROCESSING finished at 2010-09-05 03:00:16.468 GMT and took 2 m 36 s 172 msI copied SCs' info from http://host:port/sap/monitoring/ComponentInfo below:
Software Components
Vendor Name Version Location Applied
sap.com WD-APPS 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227111730
sap.com WD-FLEX 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227114200
sap.com ENGINEAPI 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227104639
sap.com LM-MODEL-CE 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110643
sap.com LM-SLD 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111825
sap.com WD-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090714195600) SAP AG 20100227112212
sap.com WD-ADOBE 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227110000
sap.com EP-MODELING 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227113917
sap.com J2EE-FRMW 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227110242
sap.com ENGFACADE 7.11 SP3 (1000.7.11.3.0.20090707223600) SAP AG 20100227111458
sap.com ESREG-BASIC 7.11 SP3 (1000.7.11.3.1.20090819222300) SAP AG 20100227110634
sap.com CAF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227114351
sap.com ESF 7.11 SP3 (1000.7.11.3.0.20090716184100) SAP AG 20100227111734
sap.com CORE-TOOLS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112432
sap.com EP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112608
sap.com APP-LIB 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227105136
sap.com MOIN_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105811
sap.com LMNWABASICMBEAN 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112135
sap.com ESCONF_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227110749
sap.com VCFRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227111401
sap.com LMINTERNALAGENT 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110251
sap.com APP-LIB-BASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com ESI-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112458
sap.com WDEXTENSIONS 7.11 SP3 (1000.7.11.3.0.20090708083400) SAP AG 20100227114257
sap.com LMNWACDP 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112218
sap.com EP-CONNECTIVITY 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112502
sap.com LMNWAUIFRMRK 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com SERVERCORE 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110257
sap.com CE-RA-EDM 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227110932
sap.com EP-BASIS-API 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112504
sap.com ESMP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110214
sap.com ESREG-SERVICES 7.11 SP3 (1000.7.11.3.2.20091001033900) SAP AG 20100227112210
sap.com ESP_FRAMEWORK 7.11 SP3 (1000.7.11.3.2.20090914172400) SAP AG 20100227112151
sap.com VCKITBI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227113947
sap.com BI_UDI 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114349
sap.com VCFREESTYLEKIT 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227114146
sap.com EP-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090715192600) SAP AG 20100227114235
sap.com BI-BASE-S 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227114355
sap.com JSPM 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110220
sap.com UDDI 7.11 SP3 (1000.7.11.3.1.20090928214200) SAP AG 20100227110233
sap.com WSRM 7.11 SP3 (1000.7.11.3.0.20090708051400) SAP AG 20100227110903
sap.com UMEADMIN 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com SAP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112125
sap.com VTP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104841
sap.com J2EE-APPS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112629
sap.com MESSAGING 7.11 SP3 (1000.7.11.3.3.20090909003900) SAP AG 20100227114300
sap.com FRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090721210500) SAP AG 20100227114152
sap.com LMNWATOOLS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com CAF-MF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227111731
sap.com CAF-UI 7.11 SP3 (1000.7.11.3.0.20090708093200) SAP AG 20100227112401
sap.com SAPNWDEMO 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com MMR_SERVER 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114353
sap.com DI_CLIENTS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112503
sap.com UWLJWF 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227113931
sap.com VCBASE 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227112627
sap.com BI-WDALV 7.11 SP3 (1000.7.11.3.0.20090715032600) SAP AG 20100227111328
sap.com BI-WDEXT 7.11 SP3 (1000.7.11.3.0.20090708083300) SAP AG 20100227114258
sap.com SOAMONBASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com EP-ADMIN 7.11 SP3 (1000.7.11.3.0.20090726162100) SAP AG 20100227114239
sap.com EP-BASIS 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112829
sap.com LMNWABASICAPPS 7.11 SP3 (1000.7.11.3.0.20090727232800) SAP AG 20100227114323
sap.com LMNWABASICCOMP 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112449
sap.com LMCFG 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112609
sap.com LMCTC 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114321
sap.com NWTEC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112331
sap.com SR-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112359
sap.com BASETABLES 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112423
sap.com CFG_ZA_CE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227105952
sap.com LM-CORE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227111845
sap.com DI_CBS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111119
sap.com BRMS-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104935
sap.com XI_CNT_SAP_BASIS 7.11 SP1 (1000.7.11.1.0.20081108235600) SAP AG 20100226194653
sap.com BRMS-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105857
sap.com BPEM-CONTENT 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227111116
sap.com ADSSAP 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104529
sap.com BPEM-PP 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227110939
sap.com BPEM-HIM 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110948
sap.com DI_DTR 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110723
sap.com BPEM-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112433
sap.com BPEM-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227111735
sap.com SAP_XIGUI 7.11 SP3 (1000.7.11.3.2.20090819222300) SAP AG 20100227111517
sap.com SAP_XIESR 7.11 SP3 (1000.7.11.3.3.20091001183900) SAP AG 20100227111819
sap.com SERVICE-COMP 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112210
sap.com BPEM-WDUI 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112404
sap.com GP-VC 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112422
sap.com GP-PP 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227113936
sap.com GP-CORE 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112606
sap.com DI_CMS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114059
sap.com BPEM-MON 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112502
sap.com VOICERT 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227111455
sap.com BRMS-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227114147
sap.com IDEUPDSITECE 7.11 SP3 (1000.7.11.3.0.20090708112000) SAP AG 20100227104951
sap.com BPEM-FLEXUI 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104710
sap.com BPEM-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104645
sap.com VOICEVC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104733
sap.com IDEUPDSITETOOLS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112428
test.sap.com HM-WDUIDMKTSCNR 7.11 SP0 (1000.7.11.0.0.1268322642085) Local Workplace 20100324083612
test.sap.com HM-WDUIDMKTCNT 7.11 SP0 (1000.7.11.0.0.1268322933427) Local Workplace 20100324083656
test.sap.com HM-WDUIDMKTCORE 7.11 SP0 (1000.7.11.0.0.1268322880287) Local Workplace 20100324083659 -
PI 7.1, RWB Performance monitoring error
Dear experts,
We are using PI 7.1 version SP5, recently service pack updated to 12 by BASIS. Whenever I am trying to check the performance monitoring in RWB. getting an error saying below :
" 3 Message(s) : Connection to Integration Server Lost - Error class com.sap.aii.proxy.framework.core.BaseProxyException: Concurrent call in detected. Connection [31] currently used in another thread:HTTP Worker [@1221137961] [142] in execute since 490394 ms.Current thread:HTTP Worker [@2014230334] [143], action: execute., error key: JCO_ERROR_CONCURRENT_CALL - No component names available from Integration Server "
The issue happening in PROD environment and bit urgent.
Please suggest you valuable thoughts to resolve the above.
Thanks
RaviHi Ravi
Check the following blog, might help you.
JCO_ERROR_CONCURRENT_CALL: Concurrent call.
No component names available from Integration Server
Regards
Osman -
Error in Performance monitoring in RWB
Hello,
I'm getting error while opening Performance Monitoring in RWB.
Error is " 2 Message(s) : Connection to Integration Server lost - Error class com.sap.aii.proxy.framework.core.BaseProxyException: Application exception raised in the R/3 system: GET_OWN_IS_NAME_FAILED . Could not create application fault message: null - "
I'm not able to get the source for it's check, can anyone please advice me wat is the problem and wat can be the solution for the same?
Expecting on ASAP basis....plz.
Thanks
Anand.Is SLD connection working? You can check it with transaction SLDCHECK on the ABAP side.
Regards,
Sergio -
Error installing Oracle Counters for Windows Performance Monitor
Hello,
I have installed Oracle EE 11g 11.2.0.1.0 on a Windows 2008 R2 server. Now, I am using the Oracle Universal Installer to install the Oracle Counters for Windows Performance Monitor 11.2.0.1.0
Source path is D:\Share\11gR2_win32_11gR2_database_install\database\stage\products.xml
Installation Type is Custom
Install Location is C:\app\dmadmin
Path is C:\app\dmadmin\OraHome_1
I de-select all product components and select the following two:
Oracle Windows Interfaces 11.2.0.1.0
Oracle Counters for Windows Performance Monitor 11.2.0.1.0
I get the following error:
OUI-10150:Error: A runtime exception occurred while setting s_digCfgNamingLabelSIDnull in component Database 11g 11.2.0.1.0 . Installation cannot continue for this component.
I am given the choice of Stop installation of all products and Stop installation of this component only which both result in non-installation of selected component.
Does anyone have any advice or solutions for this error? I have tried re-booting the server, but get the same error.
Thanks for your assistance,
StumpedOUI from ORACLE_HOME (OH\oui\bin\setup.exe) cannot be used to install components from 11.2.0.1 installation media (products.xml)
This is documented, but I am not able to locate it now.
Have you checked if the Performance Monitor files are already installed or not?
Thanks
Srinivas -
Performance monitor - System performance does not start work?
When I right click it to start it does nothing, and I can't stop it either by right clicking it.
Hi,
Please use the following method to start the performance monitor.
1. Click Start, click in the Start Search box, type perfmon, and press ENTER.
2. In the navigation tree, expand Monitoring Tools, and then click Performance Monitor.
If any error message received, please let me know.
Niki Han
TechNet Community Support -
Email does not open - "COMMUNICATION ERROR. TRY AG...
I bought NOKIA x2-2 Version 11.57 just a month back. Whenever I update email service and try to open email it does not open but a message comes saying "COMMUNICATION ERROR. TRY AGAIN LATER".
Please help me to solve this problem.
ThanksHi mhkhandaker,
Welcome to Nokia discussions board!
In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
Then open the e-mail app again.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
HELP: failed to deploy and run WL performance monitor, console extension
Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war.
java.io.FileNotFoundException: No such path: null\java\FenwayWL.war
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dsoIn order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso -
HELP: failed to setup and run WL performance monitor, console extension on WL 8.1
Hi All
i downloaded and installed the WL performance monitor, console extension package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at "Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException: No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war" and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However, it seems
of no use. I still failed to carry out any operations through "performance monitor"
node at left panel of admin console. For e.g, i failed to enable "resources" and
"statistics" monitoring option at "Performance Monitor > Agent Configuration "
screen. Very thankful somebody can help me to sort out my problem. My platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dsoIn order to find the PerformanceMonitor web app, the ConsoleExt needs to
examine your classpath to get the appropriate WLHOME. It does this by
searching for .../server/lib/weblogic.jar. Please make sure your CLASSPATH
is correct and matches where PerformanceMonitor is installed. For example,
the path to .../server/lib/weblogic.jar is the same as to ../common/perf. In
my world, they both happen to be d:\bea\weblogic81.
Paul.
"dso" <[email protected]> wrote:
>
Hi All
i downloaded and installed the WL performance monitor, console extension
package
at http://commerce.bea.com/products/weblogicserverconsoleextension/wlsext_home.jsp
As i tried to deploy "performance monitor" web app to the WL server at
"Performance
Monitor > Installation Instructions " screen. I just saw the error msg
weblogic.management.ManagementRuntimeException: weblogic.management.ApplicationException:
[J2EE:160029]I/O error while reading deployment - java.io.FileNotFoundException:
No such path: null\java\FenwayWL.war. java.io.FileNotFoundException:
No such path:
null\java\FenwayWL.war at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155) at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:452)
at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
Therefore, i used workaround to manually copy "PerformanceMonitor.war"
and "FenwayWL.war"
to <Domain Home>/applications directory for manual deployment. However,
it seems
of no use. I still failed to carry out any operations through "performance
monitor"
node at left panel of admin console. For e.g, i failed to enable "resources"
and
"statistics" monitoring option at "Performance Monitor > Agent Configuration
screen. Very thankful somebody can help me to sort out my problem. My
platform
is win2000 + WL 8.1 sp1
thanks u very much in advance.
dso -
How do I write/use performance monitor to run an action when something happens?
I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
That's fine.
I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory. I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
in Virtual and working memory. At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
second dropouts) It can even cause a complete system lockup
So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it. (restarting it will cause the problem to go away for anywhere from a few hours to several days).
I've no clue as to what triggers it.
I found a bunch of XML scripts in
Windows/pla/Rules with names like:
Rules.System.CPU.xml*
Rules.System.Common.xml*
Rules.System.Configuration.xml*
Rules.System.Diagnostics.xml*
Rules.System.Disk.xml*
Rules.System.Finale.xml*
Rules.System.Memory.xml*
Rules.System.NetDiagFramework.xml*
Rules.System.NetTrace.xml*
Rules.System.Network.xml*
Rules.System.Performance.xml*
Rules.System.Performance.xml.orig*
Rules.System.Summary.xml*
Rules.System.Wired.xml*
Rules.System.Wireless.xml*
These have some XML language in them that looks like it woud be for monitorying and doing actions:
<Rule name="$(RuleDiskSummary)" enabled="true">
<Step select="/Report/Section/Table[@name='hotFile']">
<Exists>
<Otherwise>
<Delete select="Summary"/>
</Otherwise>
</Exists>
</Step>
<Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
<Exists>
<Otherwise>
<Insert>
<Node>
<Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
<Data name="max" label="diskQueue"/>
</Summary>
</Node>
</Insert>
</Otherwise>
</Exists>
</Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
<Rule name="$(RuleDiskSummary)" enabled="true">
<Step select="/Report/Section/Table[@name='hotFile']">
<Exists>
<Otherwise>
<Delete select="Summary"/>
</Otherwise>
</Exists>
</Step>
<Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
<Exists>
<Otherwise>
<Insert>
<Node>
<Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
<Data name="max" label="diskQueue"/>
</Summary>
</Node>
</Insert>
</Otherwise>
</Exists>
</Step>
</Rule>
</Group>
<StringTable>
<String ID="GroupSummary">Add Summary Blocks</String>
<String ID="RuleMemorySummary">Memory Summary</String>
<String ID="RuleDiskSummary">Disk Summary</String>
<String ID="RuleNetworkSummary">Network Summary</String>
</StringTable>
Question is, how can I setup it for calling a trigger script when
parameters for Explorer get out of spec.
On confusing issue that stopped me from proceeding, was the time schedule to run the report:
I only allows for once/day.
I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
So how can I monitor and control it?
A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
just a feeling...
Thanks!
Astara...You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
into alert action, please follow the instruction in the link below.
Monitor disk space
http://www.ms-opsmgr.eu/?cat=43
If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support -
How to fix Communications error with Itunes in FronRow
I've had the " An error was encountered while communicating with itunes" message whilst trying to play music in Fron Row.
I ran Apple support and they advised me to check on the settings for where the itunes library was located. I did this and stiil the error persisted.
After much searching I found the solution... Completely remove iTunes then reinstall it.
Heres how...
Drag the application's icon to the Trash. Open the /Home/Library/Preferences/ folder and look for one or more preference files named "com.apple.iTunes....plist" and drag them to the Trash. Look in /Library/ folder for an iTunes folder and if you find one drag it to the Trash. Look in /Home/Library/ folder for an iTunes folder and drag it to the Trash. Last, in /Home/Library/Preferences/ByHost/ folder look for two files with names com.apple.nnnnnnn.plist and drag them to the Trash.
Open Activity Monitor (Utilities folder) and in the process list look for iTunesHelper. Select it, then click on Quit Process icon. Quit or Force Quit the process. Now open the Accounts preference pane, click on Login Items tab, look for the iTunesHelper entry and select it, then click the "-" button and remove it from the list.
Empty the Trash. This should fully remove iTunes and its associated files/folders.
It works like a dream, the communication error has gone and I can play music once again. Hope someone might find this helpfullI'm glad you found a solution that worked for you and appreciate your clear description.
It does seem a bit drastic, however. For others I would suggest at first trying one or both of these Apple support suggestions:
http://docs.info.apple.com/article.html?artnum=302533
http://docs.info.apple.com/article.html?artnum=93313 -
Help needed in getting real time system performance monitor
Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK -
Regarding performance monitoring of RWB
As far as I know , there are two ways to show the data through performance monitoring.One is [overview data],the other is [detailed data].My question is,my [overview data] is displayed successfully,but [detailed data] doesn't display anything.Some parameter need to set for [detailed data]?
Any help would be appreciated.
Brand.Hi Brand,
If detailed data is missing i think some settings were missed & just go thru the links given below ur problem will be solved
Can you check the following function modules. In SE37 look for FMs "SXIPERF*" . You will get
SXIPERF_RUNTIME XI Performance: Runtime
SXIPERF_RUNTIME_VERI XI Performance: Runtime
SXIPERF_CONFIG XI Performance: Configuration
SXIPERF_EVALUATE XI Performance: Evaluation
SXIPERF_GET_TRANSID XI Performance: Transaction ID
Refer this SAP Note-768456
Message Montioring errors- SAP Note-928862
http://help.sap.com/saphelp_nw2004s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/content.htm
Try to perform SLDCHECK First If you face any problem means Use this Help file to solve the Issue
http://help.sap.com/saphelp_nw04s/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards,
Vinod. -
Activity report failed(Communication error)- while check-in Activity
Hello SDN,
I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
CHECKIN Finished24s.9Files scuceeded.
ACTIVATE Activation Performed.Build request ID : 166
Internal Problem(Activity report failed(Communication error
[cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
to resolve this issue.
GET_STATUS could not retrieve activation status of request '166' (Unable to connect to
host:port-Address already in use:connect(Service call exception; nested exception java.io.
IOException: Unable to connect to host:port-Address already in use:connect))
regards,
Sree.Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
Hi all
I am trying to do a sync for data for MTR application and I see the following error message in the client and in the NWA (Generic Sync que monitor)
"Due to a communications error method WAF_TRIP_GET_LIST could not be executed"
How to I trouble should the error. Had any body came across this kind of error during the implementation of MTT.
Please help with some solutions. I have gone through the previous threads and tried trouble shooting it, but not able to find out the problem.
Thanks
RajHi Raj,
Are you using the same middleware system as the backend also. In this case u dont have to make an entry in the MEMAPPDEST table.
I am not sure which Configuration Guide you are referring to, but please follow the steps given the MI Installation Guide for making entries in the configuration tables for Generic Sync. I shall explain this with an example:
If WAF_TRIP_GET_LIST is the RFC to be called in the backend system, then in the table MEMAPPDEST, make an entry
WAF_TRIP_GET_LIST RFCTEST
where RFCTEST is a RFC destination of type 3 which connects to the backend system.
If WAF_TRIP_GET_LIST resides in the same middleware system, then u dont have to make any entry in the above mentioned table.
U mentioned that u have used the first one - -"Creating an RFC Destination (Middleware)". By middleware do u mean the same system?
Regards,
Nameeta
Maybe you are looking for
-
Text on numerous websites are blurry
Not including this current firefox website, the rest of the websites like yahoo or msn the font/text is not as "crisp" as it used to be in previous versions. It makes it harder to read and i assume it's because the font seems to be different. I alrea
-
ODBC for Rdb files dissolve at root directory now
Late Dec99, I noticed a change in behavior of Oracle Rdb driver installation files. For a couple years, on a Windows 95 PC, when I run the rdbwin95.exe installation program via Start > Run > and specify the -d qualifier, the installation program woul
-
No data Found for Query with hierarchy in 2004S SP10 in JAVA Stack
Hello, I have typical issue while running the simple query in ABAP Web and JAVA Web (RSRT) with One row and one column. The char in the row is restricted with external hierarchy. If I run in ABAP web, I get the results. If I run in JAVA Web, No data
-
Can I pass serialized object as argument through WebStart?
I know I can pass argument through WebStart using <argument> element in the application-desc of the jnlp file. Does WebStart support placing a Java serialized string inside the <argument> element? The reason is I want my application to behave differe
-
Hi All, We have created a manual planned order for one buy item in ASCP workbench for some qty and released it. But, we are not able to get its requisition created in source. When we check the PO_Interface _Errors table, we found that it is errored o