Performance Tab in Manage Data Targets

Hi.
In the Performance tab of Manage Data Targets screen, under DB statistics, it's stated "10 percentage of IC data used to create statistics".
What does this mean?
Thanks,
Sai.

Hi Sai,
here is some info from SAP help:
"Specify the percentage rate of InfoCube data that is to be used for compiling statistics.
The larger the InfoCube is, the smaller the percentage rate you should select, as the system expenditure for compiling statisics increases with the increase in size."
"For up to 10 million entries in the InfoCube, you should set the percentage of InfoCube data, that is used for creating the statistics, to 100%."
Hope it helps!
Bye,
Roberto

Similar Messages

Request status in Manage data targets

Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created? Any help would be highly appreciated.
Thanks
Pandiri

Hi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you.

Filtering request in Manage Data Targets

Hi,
is it possible to filter all Requests loaded in the data target (InfoCube) by some criteria (InfoSource or DataSource, Source_System...).
I would need filtering to locate all requests for delete (delete requests form one Source System / delete all request form particular InfoSource / etc.)
Thanks and regards, Tomaz

Hi,
At an infopackage level, under the tab 'data targets' there is a column titled "automatic loading of similar / identical requests from infocube". If you click on this, you will be presented with a window that will allow you to delete existing requests based on various criteria like if infosources are the same, if datasources are the same, source systems are the same etc. etc.
Check and see if this functionality meets your requirement.
Assign points if useful.
regards,
Pinaki

Manage Data Targets - ORA 03114 SQL Error

Can someone help with this one.....
We have recently patched up to 24 in our BW Dev and all was well.
When I now go into cube...manage and contents. I simply want to select a few characteristics and view the data. When I choose a particular characteristic (0profit_ctr) and ask it to display, I get the following error message..
Runtime errors         DBIF_REPO_SQL_ERROR
Database error text........: "ORA-03114: not connected to ORACLE" Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
The current status of the ORACLE instance cannot be determined. It may still be inactive or the database administrator may have restarted it . In any case, all systems that have accessed the ORACLE instance
must be restarted after the ORACLE instance has been restarted.
"DBIF_REPO_SQL_ERROR" C
"SAPLRSDRS" or "LRSDRSF04"
"FETCH_DATA_OPENSQL"
It seems to be pointing to the following line of code in LRSDRSF04...
DESCRIBE TABLE <l_t_data> LINES l_count.
which is part of this statement..
If less than 'i_pkgsize' many tuples are read
=> end-of-data is reached
    DESCRIBE TABLE <l_t_data> LINES l_count.
    IF l_count <> i_pkgsize.
      e_eof = rs_c_true.
    ENDIF.
ENDIF.
I can select other characteristics and they display OK. Reports seem to work OK. 0Profit_Ctr is active. Have emptied the cube and reloaded data. Still get the problem.
Just to confuse the issue, if I select 0Profit_ctr and 0priority together, it works (0priority is a nav attribute of 0profit_ctr)
But if I select 0project (project definition) which is also a nav attribute - it fails !
There does not seem to be any clear pattern. Some other cubes that have 0Profit_ctr have the same issue, whilst others do not !
Our Basis team have had a look and say its a 'data' problem, we will have to re-build the cubes !
Any thoughts would be appreciated.
Pete

Hi
We had the same problem. As you probably know you can define different updaterules for characteristics for separate keyfigures. For instance: for the first keyfigure get the controlling area from characteristic 0CO_AREA in the ODS and for the second keyfigure get the controlling are by a constant value 'KAD'. In our case we could solve the problem by using the same updaterules for each keyfigure and reloading the data in the cube. So maybe you can have a look at that.
Best Regards
Hans Fokker

Oracle Enterprise Manager "Performance" tab (Oracle 10g)

Hi,
How to I make a report based on Performance TAB.
View Data -> Historical
Sessions
Runnable Process
Active Sessions
Instance Disk i/o
Instance throughput
Explain : What is (example :*what is session for?* ) , What is X and Y (example :*what is X = Y= Time and date*)
Please reply.. I need it by today.. :(

The help file explains it a lot better than I can... therefore:
Interpreting the Host: Average Runnable Processes Chart
If you have opted to show both the CPU cores and CPU threads,
consistent values somewhere between the two line values may
indicate that too many users are waiting in line for CPU time.
Compare the values with those of CPU Used in the Average Active
Sessions chart. If the sessions value is low and the run queue
length value is high, this indicates that something else on the host
other than your database is consuming the CPU.
If you have selected Memory Access mode, the Host chart does
not initially display historical data, except when the screen was
loaded recently and cached historical data is still available. Host data
is cached starting from the time the screen was first accessed,
and gradually fills the history on the Host chart.
Interpreting the Average Active Sessions Chart
The Session Count is computed by categorizing the time
that all active sessions consumed in the last sampling interval
into different wait classes, summing the amount in each wait class,
and dividing it by the sampling interval. For example, If there
are 3 active sessions in the last 15-second sampling interval, and
each session spent half of the time (7.5 seconds each) on CPU
and half of the time idling, then 3 x 7.5 / 15 = 1.5 active sessions
on CPU appear for that sampling interval.
Compare the peaks on the Average Active Sessions chart with those
on the Instance Throughput charts. If the Average Active Sessions
chart displays a large number of sessions waiting, indicating internal
contention, but throughput is high, then the situation may be
acceptable. The database is probably also performing efficiently if
internal contention is low but throughput is high. However, if internal
contention is high but throughput is low, then consider tuning the database. Selecting Memory Access Mode for Slow or Hung Systems
You can click the Monitor In Memory Access Mode link in the Related Links section to enable Memory Access Mode. The Database Performance page reappears with a Disable Memory Access Mode button and a Switch to SQL Access Mode button in the upper right corner.
You can temporarily disable Memory Access Mode by clicking this button, upon which the Database Performance page reappears in SQL Access Mode. To reactivate Memory Access Mode, click the Monitor In Memory Access Mode link again, then click Enable Memory Access Mode when the Database Performance page reappears.
In Memory Access Mode, performance statistics are retrieved directly from the Shared Global Area (SGA) using optimized/lightweight system-level calls as an alternative to SQL. Memory Access mode avoids the computation associated with parsing and executing SQL statements, thereby making it ideal for severe cases of library cache contention that can prevent the instance from being monitored in SQL Mode. You should switch to Memory Access Mode for slow or hung systems.
Pages in Memory Access Mode contain data sampled at a higher frequency than pages in SQL Mode. (Charts may appear to be slightly different from SQL mode for this reason.) Consequently, Enterprise Manager provides better information about where events begin and end, and can also handle short-duration events that might otherwise be missed.
>
It basically tells you how much of a given resource was used at a point in time.
John

"Check Statistics" in the Performance tab. How to see SELECT statement?

Hi,
In a previous mail on SDN, it was explained (see below) that the "Check Statistics" in the Performance tab, under Manage in the context of a cube, executes the SELECT stament below.
Would you happen to know how to see the SELECT statements that the "Check Statistics" command executes as mentioned in the posting below?
Thanks
====================================
When you hit the Check Statistics tab, it isn't just the fact tables that are checked, but also all master data tables for all the InfoObjects (characteristics) that are in the cubes dimensions.
Checking nbr of rows inserted, last analyzed dates, etc.
SELECT
T.TABLE_NAME, M.PARTITION_NAME, TO_CHAR (T.LAST_ANALYZED, 'YYYYMMDDHH24MISS'), T.NUM_ROWS,
M.INSERTS, M.UPDATES, M.DELETES, M.TRUNCATED
FROM
USER_TABLES T LEFT OUTER JOIN USER_TAB_MODIFICATIONS M ON T.TABLE_NAME = M.TABLE_NAME
WHERE
T.TABLE_NAME = '/BI0/PWBS_ELEMT' AND M.PARTITION_NAME IS NULL
When you Refresh the stats, all the tables that need stats refreshed, are refreshed again. SInce InfoCube queries access the various master data tables in quereis, it makes sense that SAP would check their status.
In looking at some of the results in 7.0, I'm not sure that the 30 day check is being doen as it was in 3.5. This is one area SAP retooled quite a bit.
Yellow only indicates that there could be a problem. You could have stale DB stats on a table, but if they don't cause the DB optimizer to choose a poor execution plan, then it has no impact.
Good DB stats are vital to query performance and old stats could be responsible for poor performance. I'm just syaing that the Statistics check yellow light status is not a definitive indicator.
If your DBA has BRCONNECT running daily, you really should not have to worry about stats collection on the BW side except in cases immediately after large loads /deletes, and the nightly BRCONNECT hasn't run.
BRCONNECT should produce a lof every time it runs showing you all the tables that it determeined should have stats refreshed. That might be worth a review. It should be running daily. If it is not being run, then you need to look at running stats collection from the BW side, either in Process Chains or via InfoCube automatisms.
Best bet is to use ST04 to get Explain Plans of a poor running InfoCube query and then it can be reviewed to see where the time is being spent and whether stats ate a culprit.

Hi,
Thanks, this is what I came up with:
st05,
check SQL Trace, Activate Trace
Now, in Rsa1
on Cube, Cube1,
Manage, Performance tab, Check Statistics
Again, back to st05
Deactivate Trace
then click on Displace Trace
Now, in the trace display, after scanning through the output,
how do I see the SELECT statements that the "Check Statistics" command executes
I will appreciate your help.

How can I visit the performance tab when the target DB is down?

Hi, All:
I wonder if it is possible to visit the performance tab when the target DB is down. I thought it should be possible. But whenever I first click the performance tab, I will be asked to enter the user/passwd for the target db(I have set the preferred credentials).
Furthermore, is it possible to analyze the history sql/performance if the target db is not startup? and how can I do it?
Thanks in advance

I have seen other postings by the same ID and my suggestion is that you have a look at the Enterprise Manager Documentation Library. After that, you can ask questions relating to subjects you cannot solve with the documentations.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

Performance tab not working in Enterprise Manager for user with dba role

Database: 11g2
New to Oracle. Don't want share SYS user account among dbas. Tried to create user with dba role to perform all tasks.
1. Removed DBMS_JOB, DBMS_LOB, UTL_FILE, UTL_HTTP, UTL_SMTP, and UTL_TCP from PUBLIC
2. Created user dbauser1 with dba role
3. Log in as dbauser1 in Enterprise Manager
After click Performance tab, it just went straight to "Database Login" page. No error message.
Any suggestions or advice will be appreciated.
piaoma

Hi Gourav,
This is the wsdl url:
http://hostname:8000/sap/bc/srt/wsdl/bndg_E04711310A0E55F1A0E3005056B03D6F/wsdl11/allinone/ws_policy/document?sap-client=450
Kind Regards,
Richard

Standard Business Content & Data Targets for Case Management & CRM Survey

Dear Friends,
We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
1. Case Management
2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
Please guide.
Regards,
Rajesh Banka

hi,
You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Deepti

Enterprise Manager "Performance" tab is suddenly disabled.

I've been logging onto Enterprise manager using the same credentials for months with
no problem. Today I logged in and I suddenly can't access the performance tab
on EM. I usually logon as sys as sysdba.
I DID change some DB init. parameters, increasing the number of processes and cursor resources but that's it.
Why is my "Performance" tab disabled now ?
How can I get it back ?

Try logging into your OEM again.
Then go to 'setup' in your upper right corner.
Once in the setup screen, go to the left border menu and select "Management Pack Access".
Take a look if you have a check in the box for 'Database Diagnostic', and one for 'Database Tuning'

Tab "Data targets" is missing when creating an InfoPackage

Hello,
when I´m creating an InfoPackage in the maintain screen, the tab "Data targets" is missing, although there are some active transformations to InfoProviders. In tab "Processing" the option "Only PSA" is selected and all other options are greyed out.
Does someone knows the reason? How can I definde the Data Targets to be processed in the InfoPackage maintain view?
Regards,
Meba

Hi All,
1.First of all, while creating transformations , mention sorce as Data source and target as Infocube and the same is for DTP creation also. Then we will get Data targets under "datatargets" tab.
2.As far as my openion is concerned,It will only works.. if we have the requirement to load Monthly data to one Infoprovider, yearly data to second Infoprovider and weekly data to third Infoprovider then we need to create three DTP's for for respective Infoproviders.In this case we can select appropriate Infoproviderwith respect to DTP's.
Thanks
B K Eswar

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

Link to performance tab in task manager

Hello,
Is there a way to immediately link to the performance tab in task manager? Using taskmgr.exe always starts in processes tab.... I would love to be able to create a shortcut that links to the perfomance tab for quick access.
Thanks.
Willem

Hi willwmdhae,
What is the main purpose of this operation ?
I have no idea of changing the default process tab to performance tab of task manager. But we can create a shortcut to open the task manager directly. The taskmgr.exe is located in
C:\Windows\System32 folder. We can create a shortcut to open the task manager directly.
Apart from this ,there are several ways to open the task manager in Windows 8.1.
1. CTRL + ALT + DEL key (The usual way)
2.CTRL + SHIFT + ESC( Windows vista and higher version)
3.Right click the taskbar and choose “Task manager”
4.Right click the Win tab (Win+X) and choose “Task manager”
Best regards

Performance Tab in Manage Data Targets

Similar Messages

Maybe you are looking for