Request status in Manage data targets

Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created?  Any help would be highly appreciated.
Thanks
Pandiri

Hi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you.

Similar Messages

  • Filtering request in Manage Data Targets

    Hi,
    is it possible to filter all Requests loaded in the data target (InfoCube) by some criteria (InfoSource or DataSource, Source_System...).
    I would need filtering to locate all requests for delete (delete requests form one Source System / delete all request form particular InfoSource / etc.)
    Thanks and regards, Tomaz

    Hi,
    At an infopackage level, under the tab 'data targets' there is a column titled "automatic loading of similar / identical requests from infocube". If you click on this, you will be presented with a window that will allow you to delete existing requests based on various criteria like if infosources are the same, if datasources are the same, source systems are the same etc. etc.
    Check and see if this functionality meets your requirement.
    Assign points if useful.
    regards,
    Pinaki

  • How to push a perticular request from PSA to Data target using DTP in BI

    Hello all.
      I have mulitple requests in PSA & wanted to move only perticular requests (Randomly,  say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
      Thanks in advance..
    Cheers,
    sami.

    Hi,
      It is possible by using 'zero fetch' in DTP
    If you want only the recent req to be loaded.
    1. In PSA, change the status of the recent request to red
    2. Do a zero fetch
    that is processing mode - No data transfer; delta status in source: fetched
    With this processing mode you execute a delta without transferring data.
    3. change the particular request status back to green
    4. Run a delta load
    Regards,
    Priya.D

  • Performance Tab in Manage Data Targets

    Hi.
    In the Performance tab of Manage Data Targets screen, under DB statistics, it's stated "10 percentage of IC data used to create statistics".
    What does this mean?
    Thanks,
    Sai.

    Hi Sai,
    here is some info from SAP help:
    "Specify the percentage rate of InfoCube data that is to be used for compiling statistics.
    The larger the InfoCube is, the smaller the percentage rate you should select, as the system expenditure for compiling statisics increases with the increase in size."
    "For up to 10 million entries in the InfoCube, you should set the percentage of InfoCube data, that is used for creating the statistics, to 100%."
    Hope it helps!
    Bye,
    Roberto

  • How to Schedule a particular request from Datasource to Data Target

    Hi Freinds,
      I have loaded x no of requests of flat file sources to the data source(p.s.a) ,  But i am unable to load particular request no  to the data targert(incube) throgh D.T.P.
    Thanks & Regards
    P.vishwam

    Hello,
    You may try the this option.
    Right click on the datasource -> Manage. Now you can see all the PSA requests. Now, click on the traffic light button of all the requests except the request that you want to load, and set their status in to red.
    Now if you run the DTP, it will pick only the green one. After the DTP is completed, you can change back those red requests into Green status.
    Hope this helps.
    Regards,
    Bijesh

  • Request Status for Master Data Attributes Load

    Dear All,
    We are trying to load attribute master data and volume of which is relatively huge around 10,000 records.
    We are facing challenge while updating attribute data from master data info object , the load status remains in yellow status and when we went to details screen it states that data is transfered to transfer rule . ( it has been loaded successfully in to PSA).
    Could anybody please give some hint on this challenge ??
    Regards
    Kapadia

    Hi  Paolo Siniscalco,
    You are right, as number of records are more , i have chosen update of "Only PSA" and then "Subsequently in Data Targets".
    I tried other option also which is infopackage  schedule "Execute in Back ground" and                                                         
    "Request batch process runs untill all data is updated in BW". And process went in to infinite loop.
    Some how i am not able to track out why the request status is not changing .
    Regards
    Kapadia

  • Manage Data Targets - ORA 03114 SQL Error

    Can someone help with this one.....
    We have recently patched up to 24 in our BW Dev and all was well.
    When I now go into cube...manage and contents. I simply want to select a few characteristics and view the data. When I choose a particular characteristic (0profit_ctr) and ask it to display, I get the following error message..
    Runtime errors         DBIF_REPO_SQL_ERROR                                                                 
    Database error text........: "ORA-03114: not connected to ORACLE" Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
    The current status of the ORACLE instance cannot be determined. It may still be inactive or the database administrator may have restarted it . In any case, all systems that have accessed the ORACLE instance 
    must be restarted after the ORACLE instance has been restarted. 
    "DBIF_REPO_SQL_ERROR" C    
    "SAPLRSDRS" or "LRSDRSF04" 
    "FETCH_DATA_OPENSQL"       
    It seems to be pointing to the following line of code in LRSDRSF04...
    DESCRIBE TABLE <l_t_data> LINES l_count.
    which is part of this statement..
      If less than 'i_pkgsize' many tuples are read
      => end-of-data is reached
        DESCRIBE TABLE <l_t_data> LINES l_count.
        IF l_count <> i_pkgsize.
          e_eof = rs_c_true.
        ENDIF.
      ENDIF.
    I can select other characteristics and they display OK. Reports seem to work OK. 0Profit_Ctr is active. Have emptied the cube and reloaded data. Still get the problem.
    Just to confuse the issue, if I select 0Profit_ctr and 0priority together, it works (0priority is a nav attribute of 0profit_ctr)
    But if I select 0project (project definition) which is also a nav attribute - it fails !
    There does not seem to be any clear pattern. Some other cubes that have 0Profit_ctr have the same issue, whilst others do not !
    Our Basis team have had a look and say its a 'data' problem, we will have to re-build the cubes !
    Any thoughts would be appreciated.
    Pete

    Hi
    We had the same problem. As you probably know you can define different updaterules for characteristics for separate keyfigures. For instance: for the first keyfigure get the controlling area from characteristic 0CO_AREA in the ODS and for the second keyfigure get the controlling are by a constant value 'KAD'. In our case we could solve the problem by using the same updaterules for each keyfigure and reloading the data in the cube. So maybe you can have a look at that.
    Best Regards
    Hans Fokker

  • Purge Concurrent Request and/or Manager Data program:

    Hi Friends,
    I am purging all my test report output logs using the above program, but the table
    FND_CONC_PP_ACTIONS is not being deleted;
    SQL> select count (*) from FND_CONC_PP_ACTIONS;
    COUNT(*)
    9470
    FND_CONC_PP_ACTIONS
    Stores the post request processing actions(e.g., print, notify) for each
    submitted request. There's a concurrent_request_id here for each request_id
    in the FND_CONCURRENT_REQUESTS.
    How can i forced delete the tables? since im still on the testing phase its OK if i zero out
    all of it.
    Thanks a lot

    or I want it zero (0) to delete all You cannot set it to zero (0). The Age parameter should be between (1) and (9999999).
    Did I mess it up? when I manually deleted the contents of
    I thought I can delete this logs manually because they are on filesystem.
    I thought only the database tables are needed to be cared for. Even though you should not bother yourself and delete the files manually under $APPLOG and $APPLOUT directories since the concurrent request will do the job for you, it is safe to delete it manually. The only impact you would have here is, you would not be able to access the log/out files of the concurrent requests (if the requests still presented in the tables and you can see it from the application).
    Did you try to use the "Count" parameter instead of the "Age"? The "Count" parameter indicates the number of (most recent) records for which you want to save concurrent request history, log file, and report output files.

  • Request not updated to any data target using delta

    I am on BI 70 using 70 DataSource.  I executed InfoPackage in full update, then ran DTP in full mode.  There is only 1 data target.  The requests were successfully updated in the target DSO.  However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle. 
    My questions are:
    1.  Is this normal?
    2.  I need to do more full loads.  When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
    Thank you.
    Rebecca

    Hi Rebecca,
    To answer your questions
    1. Yes. This is normal.
    2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA)  would be re-loaded to the same data target .
    If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
    Hope this helps!
    - Meera

  • Displaying datas of each and evey request in the data target

    Hi All,
    Can we display the datas of a single request alone in the data targets such as DSO, Cube, etc.,
    If yes please let me know the procedure.
    Thanks in advance.
    Regards
    Geetha

    You can do that,
    for DSO - se16 -> give the change log table name of the DSO (here change log data of the dso should not be delteted)
    cube - listcube -> give the request number ( here that particular request should not be compressed)
    If it satisfied above conditions  you can display that particular request.

  • Update data targets from ODS

    Hi Friends,
    I have question regarding how to update data further from ODS.
    I have ODS1 and ODS2.
    ODS1 is having deltas updated from ODSA.
    ODS2 is a new ODS and now needs to be updated from ODSA.
    I have reviewed the help already.
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/749bbb595511d4b2bc0050da4c74dc/content.htm
    I want to initially update the ODS2 with <u>selection conditions</u> from ODSA.
    After that I want to load delta from ODSA to ODS2 by automating the process in process chain.
    Please help me know, What is the optimum solution and what are the steps need to be executed.
    Thanks,
    John.

    Anil,
    I am just repeating the procedure to cinfirm that I understand it properly.
    1. Go to scheduler, Initialization option make the status of the overall request red.
    2. when it asks for update the QM status to all data targets, select no.
    3.and then delete the init. request from Scheduler.
    By doing this we just deleting the initialization selection and the request in the subsequent data targets are still green and they contain data.
    After that Init. without data transfer will do the work.
    Please confirm,
    I really appreciate your input on this.
    Thanks.

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • Add fields to IW31 WO: Parts Requested, Order Date, Target Date

    Hello,
    We have been requested to add 3 dates fields to a Work Order to help identify status for WO.
    The dates fields we will have to include in the WO is:
    -Parts Requested Date
    -Order Date
    -Target Date
    In addition they want this report to be included in IW37N.
    Is there a way to pull this off or are there fields that I can utilize in the current WO table that I can use to input this information?
    Thanks.

    Hi,
    If you want fields at order header level it is best to add some custom fields to the Enhancement Tab with help of exit IWO10018. This solution involves creating a new screen SAPLXWOC 0900 and adding the custom fields to structure CI_AUFK.
    For fields at operation level you can choose to use a limited set of user fields on the Operation Enhancement Tab. Create a field key with transaction OILJ and select the fields to be used. This will determine which user fields are available in the operation.
    These fields will not appear on IW37N output list. You would need to append the user fields to the outout structure RIH_ORDER_OPERATION_LIST.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • PSA request updated to data targets but not showing

    Hi All,
    It must be a basic question for BW support activities. However appreciate if someone can help me out as I am unable to find similar post.
    In PSA the request shows it successfully updated to a data target but I can't see the delta request in the data target (Cube)- Manage.
    This is a delta request. Can someone tell me how do I load the data back in to the cube? Do I need to delete the request from cube and run it again but I guess the deltas will be lost.
    Help. pls give me all the steps in detail how do I fix this.
    Thanks,
    B

    Hi,
    There are two options.
    1. at PSA find how many records are exist for your request.
    Note/down load the records into excel if you have countable. As my guess delta records might be less.
    Later thru repair full request you can load to PSA and then to target.
    AT repair full request we need to use proper selections to load required records only.
    2. PSA Request must be stored at back end table.
    in that table if we can change update further status then we can do the psa request to target thru delta dtp.
    Thanks

  • Is it possible to load a request already updated in the data target ?

    Hi Experts,
    Question: load a request which is already updated in data targets and data mart status is set
    Data flow:
    source system -
    > ODS1 -
    > Infocube1
    Now, requests are first loaded into ODS1. Then these request are loaded into Infocube1.
    Now, i deleted the request in the Infocube1.
    Is it possible to reload the request from ODS1 to Infocube1 ?
    Please suggest how.
    Regards,
    Suraj S Nair

    Hi  Masthan Kaniganti          ,
    It is possible to load the data but not same request.
    The reason why we can not load the request is in ODS level delta resords are updated ,hence with the selection condition we have to load the present and previous data.
    and one more thing...
    If you are deleted request in Cube level means, we can reconstuct the same  request via reconstruction tab.. 
    Hope this helps you...let me know if you any further ifo on this..
    Best Regards,
    maruthi

Maybe you are looking for