Period Problem for MR21

Dear All,
i am getting problem for the following in transaction MR21, as there is no stock available for material.
Posting period 03 2008 is not open
Message no. F5201
Diagnosis
Period 03 of fiscal year 2008 is not open for posting for the variant of posting period .
regards,
qsm sap

Hi,
First check the Current period in OMSY trx...for your Comp code..
Then go to MMPV and enter Comp code, Period & Year
and execute...
Ex: if the current period in OMSY for your Comp code is 01,2008
then you need to enter period 02, 2008 in MMPV trx...
so, that period 01 will be closed & Period 02 will be opened automatically...
You need to close periods one by one like this..
until the period you want use...
Thx
Raju

Similar Messages

  • Accounting period problem for doing PGI

    Hi Friends
    I am getting this error while doing PGI , I have entered Actual goods issue date in delivery header  manually . 15 .11.2008 . I am trying to do PGI on 7.12.2008 .
    u201C@5C\QError@     E     F5     286     900001     Period 008/2008 is not open for account type S and G/L 500010     @35\QLong text exists@     200.F     WHL ASSY ALUM 16 X 7     30,000     EA     0000000685u201D
    I guess it is because of accounting period closing for November 2008 .
    Just I want to know ,for doing PGI also ,  does  accounting period maters ?
    If it maters , I request you to mention solution please .
    With regards
    Jayapala S.H

    Hi jaypala
    Firstly go to MMPV and check the closing period of your company code if it is in past close the month by MMRV and then do delivery and PGI and check still if it is not working then Go to OB52 and maintain for account type S with the G/L account 500010 and the closing month and the year.
    Regards
    Srinath

  • Problem in BDC For MR21

    hi all,
    I had written the bdc for mr21 using session method. I am not able to change the standard price using BDC. Recording is perfect. Using transaction mr21 I can change the price but using bdc , it's not changing.It is not giving any error. it gives message that no changes in price have been made.
    Thanks in Advance.
    Regards,
    Atul

    Hi,
    In the code check for one thing...
    when you are populating the price value in the table use the following code and then check if it works.
    data lw_string type string.
    write price to lw_string currency currncykey   " here price is the variable which contains the value... and
    "   Currency key is the currency key for the price which you can get from the table where you get the price.
    "then
    bdcdata-fieldval = lw_string.
    append bdcdata.
    Just check if this works, As earlier I faced a similar kind of a problem when I did this it was resolved....
    Regards,
    Siddarth

  • Condition Period Problem in Sales order -  Need help

    Hi Gurus
    I am testing Sales Order back dated
    Condition period Problem in Sales order
    example for you to understand
    Sales Order where PO date is 17.12.2007
    Del Date & Price date is 13.02.2008
    Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
    But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
    When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
    I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
    Rajesh Chalke

    Hi,
    I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
    Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
    Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
    Cheers,
    KC

  • Good receipt problem for subcontracting purchase order

    Good receipt problem for subcontracting purchase order
    with account assignment type ‘E’.
    After update to ECC 6.0. Do good receipt for subcontracting purchase order with account assigment 'E'.The system show the error message(KI235)----Two cost elements (Change in Stock (Subcontracting)&Outside processed fee) haven't CO account assignment.but the field status  for sale order is option entry , when I default cost center for the cost element  in OKB9.the system post the material document and generate the following accounting document.
    Doc.Type : WE ( Goods receipt ) Normal document
    Doc. Number    5000056065       Company code    1000         Fiscal year     2007
    Doc. date      2007.12.04       Posting date    2007.12.04   Period          12
    Calculate Tax
    Doc.currency   HKD
    tm PK Account    Account short text   Tx Cost Ctr   SaleOrder               Amount
    1 89 13500000   Stock-Work in proces                   1007823  10             274.4
    2 96 21210010   GR/IR Clearing                             1007823  10             205
    3 91 41010102   Chg in Stock(Subcon)    10901099  1007823  10            274.4
    4 86 41031000   Outside processed fe     10901099  1007823  10            205  
    5 99 13500000   Stock-Work in proces                    1007823  10            69.4
    6 81 41010101   Cost of Prod (Subco)                      1007823  10           69.40
    My problem is:
    When use MIGO to do good receipt for subcontracting Purchase order, for consumption account((Change in Stock (Subcontracting)-41010102&Outside processed fee--41031000) ,why the system don’t recognize the sale order filled as CO account assignment?

    Dear fanny chen
    Did you get a solution for your open question?
    I`m facing the same problem, so any help yould be appreciated.
    Regards

  • Wrong period selection for date entered

    Dear Friends,
    In payslip program, I have used HR report category (X_M00002) that shows two options (radiobutton) for period selection:
    1. Current Period
    2. Other Period
    Problem is that when I enter other period as 01.2007 it displays salary slip of February 2007 instead of April 2007 though the period in selection screen on pressing the enter key shows 01.04.2007-30.04.2007.
    This is a copy of another program which shows correct payslip for selected period.
    What could the possible error be?
    Regards,
    Amit

    >
    Amit Srivastava wrote:
    > I had missed to unmark a chackbox named 'Print retroactive runs' in the selection screen. Unmarking it solved the problem.
    > Amit
    Hi, Amit
    Total Questions:         50 (33 unresolved)
    Your most of the Question are still open as you have found the solution of your problem so please mark this question as answered and also the other your open question where you have go the Solution, Please
    Best Regards,
    Faisal

  • Wrong period displayed for current period in HR Report Category

    Dear Friends,
    I have used HR report category (X_M00002) in my program that only shows two options (radiobutton) for period selection:
    1. Current Period
    2. Other Period
    Problem is that when I select current period and press enter key it takes 01.2006 (i.e. 01.04.2006 to 30.04.2006) instead of current period 01.2010.
    What could the possible error be?
    Regards,
    Amit

    Hi Amit
    The current period will not be set based on the current calendar month and year. The current period will be based on the current period for the payroll area which you have entered. You can check the current period of a given payroll area from the transaction PA03.
    Hope this answers your question.
    Regards
    Ranganath

  • APP-INV-05447: No open period found for date entered

    Hi All
    I try to do Inter-Organization Transfer in OPM. But I got this error "APP-INV-05447: No open period found for date entered".
    What shall I do for this error?
    I controlled Inventory Calendar. The period is open.
    Thanks

    Hi,
    I got the same problem. Pleas tell me what's your solution?
    Parts Requirement Order stuck in Transaction Interface with the error
    " No open period found for date entered
    No open period found for date entered
    Transaction processor error
    No open period found for date entered
    No open period found for date entered
    Transaction process".
    Details are as follows:
    Transaction is Done on 30-NOV-2009.
    Source Org Period is open on 30-NOV-2009
    Destination Org Period is closed on 30-NOV-2009.
    Due to destination Org is closed, this transactions stuck in interface.
    I have opened the Cost Periods (DEC Month) for both Source and Destination Org, and resubmitted all lines after updating Transaction date to 01-DEC-2009. Still transaction could not go through.
    How should I handle this error?
    Regards,
    Chakry.

  • Periodic Billing for Rental Contracts

    Hi Gurus,
    Periodic Billing for Rental Contracts
    I have a customer requirement where in i need to create a Rental Contract of type say MV.
    Billing should be periodic in nature. Say today is the GI date 22/SEP/2008, they give 7 days of lead time up to 29/SEP/2008. From this date onwards the customer is to be billed. They do the invoicing on a quartely basis. From 29/SEP/2008 up to 28/DEC/2008, they need to create one single invoice. This single invoice will be generated sometime in January 2009. How will i configure the system to generate date specific invoices...?
    In Periodic billing system will generate billing only on month ends say 30/SEP/2008, 31/OCT/2008 and so on...
    This is a high priority issue...Please reply with a solution as soon as possible;
    Thanks in advance;
    Regards,
    Syed Nasir

    Hi Syed,
    This is not an easy option to do:
    In our case, we have opted out of this scenario, but we have evaluated these two options:
    1) You can do the monthly billing as present in the SAP, and then you can make one lumpsum invoice for the three invoices generated in a quarter. But the problem is that the revenue shows to be pending and can hurt the business targets.
    2) If you have to create this process for only few customers. You can use any two special fields for the contract one field for date and a field for quaterly tagging. Then you have to just create a daily batch job which invoices the contract on the basis of contract type, date and tag. But if you have large number of contracts to process then this would not be recommendable solution.
    Hope this helps,
    Abhishek

  • Verizon DSL drops out intermitte​ntly: problems for 10 months

    Subject: Verizon DSL drops out intermittently:  problems for 10 months
    Hi all,
    Just wondering if any one can help.  We had Verizon DSL on our home phone line for six years in Worcester MA.  The first five years we had little to problems.  The last 10 months we’ve have frequent (nearly every day drop out and period where the DSL line can’t connect for minutes to sometimes hours).
    We’ve had seven different technicians visit us for a total of thirteen visits.  They’ve replaced the line coming into our house multiple times and isolated our home phone lines from the DSL feed but this hasn’t helped. Verizon tech support can’t seem to get back to me with a detailed plan of what they are going to do next and few representatives return my phone calls.
    We’ve also tried at least five router and modems and it hadn’t helped.  They recently changed the DSL card(?) in the local office (~7000 ft away) and said they switched us to ADS2.
    We’re still seeing internet drops and we’re at our wit’s end.
    Any ideas?
     Here’s our transceiver stats from our Verzion 7500 DSL modem combo:
    Transceiver Revision     A2pB020b3.d20h
    Vendor ID Code          4D54
    Line Mode                   ADSL_2plus
    Data Path                     FAST
    Transceiver Information            Down Stream Path       Up Stream Path
    DSL Speed (Kbits/Sec)            3358                            863
    Margin (dB)                             9.2                               7.0
    Line Attenuation (dB)               44.0                             19.4
    Transmit Power (dBm)21.0                             12.4
    Thanks,

    Well, we're getting pretty fed up.  Here's the letter that we are sending out for a Verizon Presidential Appeal...
    To:
     Verizon, St. Petersburg, FL
    Verizon Technical Team, Worcester, MA
    The Department of Telecommunications and Cable, Consumer Division, Boston, MA
    Better Business Bureau
    Dear Sirs,
    We are writing to lodge a formal complaint about our Verizon DSL service, and the extremely
    poor treatment we have received while trying to resolve this (still unresolved) problem. We have had
    intermittent internet outages for the last 12 months. This followed five years of normal DSL service at
    the same address. Our problems worsened this spring; our internet is out a few minutes to several
    hours a day, most days a week. Our next door neighbors have the same problem with their Verizon
    DSL service, though they do not use the internet very often so are less affected than we are. We rely
    on consistent internet service for our jobs.
    We have had 13 technician visits to our home from a total of seven different technicians. On
    multiple occasions, we have also been stood up for scheduled technician visits, including days in
    which we took off work to be home. Two of these times in which we were stood up were not visits that
    Verizon initiated, where we were told we needed to be home. Additionally, we have received
    several “auto-calls” informing us that our problem is fixed and our work tickets have been closed. This
    is extremely upsetting to us, as our problem has never been fixed as we have explained many times.
    Several technicians have spoke confidently (and condescendingly) that their work would fix our
    problem; these are generally the technicians we never saw again.
    It is clear from our several calls each month to Verizon that persons and departments within
    the company do not communicate with one another. Time and time again, we have been shuffled from
    person to person, and now believe that no one wants to expend the effort to deal with our problems.
    For example, multiple employees have failed to call us back when they said they would. We have
    asked several times for a team of creative thinkers (with the authority to act) to brainstorm some sort
    of solution and let us know what Verizon was doing to solve our problem. This has not happened. We
    have made extensive notes about our service interruptions and our correspondence with Verizon over
    the last several months; these are included in this packet. We also have multiple videos across several
    months showing that DSL signal is not available.
    We believe that a new line needs to be put in from the local hub to our house, a distance of
    only a few blocks. (See notes on reverse of page.) At this point, we have no faith that Verizon is
    willing to fix this problem and restore service to us. This is truly a shameful way to do business.
    If Verizon is unwilling to restore our DSL service to acceptable levels, we would like Verizon to
    Notes: This is what Verizon has told us they have done:
    1. Isolated our phone line from DSL.
    2. Replaced the line from our street to our home.
    3. Switched the F2.
    4. Put us on an A-DSL2 card at the local hub.
    We have tried seven DSL modems and six routers without success. The problem is not within
    our house; that is clear. We believe a new F1 line is needed. We were even told by a company
    representative on the phone “well, DSL is on copper wire…” - basically from our view, an admission
    that copper wire can go bad, and that this may be the cause of our problems. We have asked for a
    new F1 line to be installed several times and been brushed off each time.

  • Installation problems for Adobe Director 11.5 for Mac OS X Lion

    I've downloaded other Adobe products from this site before, like Photoshop Lightroom, etc. There were no problems concerning installation with that. But when I downloaded the Adobe Director 11.5 for Mac recently, the process of installation stops in the middle of installing it. I thought there was just something wrong with the file I downloaded, so I downloaded it again, and again. But every time I try to install it to my Macbook Pro, it gets stuck at the exact same place. What's wrong with it?
    Also, I tried downloading a Windows based Adobe Director. And it said the trial period is for 90 days. But when I activated it, it only registered as a trial for 30 days. Can you please help me with this? I badly need it for my schoolwork.
    Thank you in advance!

    I'm having the same problem - I can't install on my Mac running OSX 10.8.2. I was having trouble with an existing installation of Director 11.5. I was hoping a fresh install may solve the problem, but the installer freezes at about 75% complete.
    Hey Adobe - just put us out of our missery already and either fix Director or officially announce it's been abandoned!

  • STK problem for iPhone5? like the basic display

    I found some problem for iPhone 5/6 STK's support. the display proactive command,
    if the text is very simple,  it's ok. like display"hello";
    but for the following text with return "0D0A" format
    D081D28103012180820281028D81C604436865636B41637442616C20537563636573730D0A4F534E 3A31303030203030303020303131300D0A547820446174653A31312F31312F323031340D0A547820 54696D653A31343A32343A31320D0A547261636B20436F64653A3030343134310D0A53656E646572 204E616D653A4368616E2050696B53616E0D0A4163636F756E74204E756D6265723A343834382034 383030203030303020303230300D0A4163636F756E742042616C616E63653A35382C3830302E3030 0D0A5478204665653A302E3030
    the ascii string should be :
    CheckActBal Success
    OSN:1000 0000 0110
    Tx Date:11/11/2014
    Tx Time:14:24:12
    the terminal response is 801400000D 81030121800202828103022001, mean screen is busy.
    is the iphone not support the return character?(i already tried to change the return character to 0x0D, same problem, but for androin phone, it works very good.)
    who can help me? Thnx

    lets say u restricted the first column like this
    bring amount in columns
    right click edit
    bring in fiscal period  from left to right from time dimension
    right click fiscal period
    hit restrict
    enter range of variables
    hit ok
    hit ok
    copy this amount
    paste it
    now go in 2nd amount
    go to fiscal period and hit restrict
    u see variable
    select variable and right click and hit SET OFFSET
    enter -12 twice
    now i am asking u to create interval between two variables whose entry is single value
    becos
    u will use text variable for display
    and text variable will only take single entry variable for replacement
    so use text variable
    go to dispaly and hit Entry of variable
    create new variable
    hit replacement path
    processing by fiscal period
    got to replacement tab
    replace variable with variable
    choose ur 1st entry variable
    similarly create another variable with selecting another variable
    now use proper offset length and offset start for proper display
    i dont know which time char will u use but my assumption
    is with respec t to assumption
    u will use fiscal period

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

    Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can  speak  or response me in thai language
    1. ผม อาคเนย์  พำนักอยู่ประเทศไทย กรุงเทพฯ  มีปัญหาสอบถาม ดังต่อไปนี้
       - กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
       - ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
    รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback  email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
    ขอบคุณครับ
    อาคเนย์  อุดปิน
    กด
    <Edited By Host>

    Google translation:
    พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
    http://www.apple.com/emea/support/itunes/contact.html

  • Problem for releasing  blocked sales order on Creditlimit

    Hi Gurus,
            I a   hve a problem for releasing blocked sales orders
             what i have done: 1)i have blocked sales order based on exceeded creditlimit
             (i have change SDType in 'OVAK' is 'C')
                      2)now i have to release for furthur processing so i have done following steps
                      3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                      4) order will appear in the list.
                      5)Select that one.
                      6)Click on the green flag that appears on the left hand side.
                      7)Click on save.
                      8)click on back it will ask for "Leave list".
                      9)Click on yes.
                      10)It said that Sales orer has been released
    Still what my problem is:
    Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
             2)"Sales order is blocked for delivery: Credit limits" Even it was released    
    Plz kindly help  me what i do....
    Thanks In Advance
    sivakumar

    sorry   i was  unfotunately put this thread here  over in SD

Maybe you are looking for