Wrong period displayed for current period in HR Report Category

Dear Friends,
I have used HR report category (X_M00002) in my program that only shows two options (radiobutton) for period selection:
1. Current Period
2. Other Period
Problem is that when I select current period and press enter key it takes 01.2006 (i.e. 01.04.2006 to 30.04.2006) instead of current period 01.2010.
What could the possible error be?
Regards,
Amit

Hi Amit
The current period will not be set based on the current calendar month and year. The current period will be based on the current period for the payroll area which you have entered. You can check the current period of a given payroll area from the transaction PA03.
Hope this answers your question.
Regards
Ranganath

Similar Messages

Wrong photo displaying for sender of iMessage

Wrong photo displaying for sender of iMessage .Contact information says another contact is "ME," it says ME next to anther contact, but it is not me. They are not signed in in icloud. I am signed in. So I do not understand

As per my post above, I believe the fix to be:
"When I got to General, I worked my way down the list and imagine my surprise when I found Siri of all things had her name down against it and not mine. Lo and Behold, when I changed this to my name and returned to iMessage, my photo now displayed against my replies.
So, if you have someone else's photo showing on your iMessage replies I strongly recommend you look at Settings > General > Siri first!"
Hope this helps Roger.

Document Summary, wrong values displayed for not persistent prompt

Some prompt values displayed on the document summary portion of the document properties area are displaying incorrect values.
It looks like non persistent prompts are showing the value of the prompt listed just before the non_persistent prompt, instead of the value entered by the user.
eg: persistent prompt 'enter code', user enters 1234
non persistent prompt 'enter date', users enters 1/2/2008
display in document summary:
code - 1234
date - 1234
Is this a known issue with Webi? I imagine it is not an issue with the report, but if so, please let me know if there is something I can do to correct it.
Thanks!

HI Nilanjan,
Thanks for your suggestions but i do not have any data in Apshell to test if it is being displayed correct or not.
Please advice me further.
Regards,

Wrong GB displayed for number of songs

I have an iPod mini and have always had about the same songs on my itunes and iPod. Ever since I recently updated my iTunes, it changed the number of total GB. I have always been able to fit these songs (958 songs) on my 4.0 GB iPod mini, but now iTunes says that the 958 songs are 6.67 GB, so they do not fit on my 4.0 GB iPod. Why did this suddenly change and can I fix it?

Go to View, and click on Show Status Bar

Line item Display for G/L Account Regarding report RFSEPA01

In transactions reports: FBL3N and FS10N I have differents accounts balances display.
I already had tried to execute the RFSEPA01 but it shows RUNTIME ERROR ..Somebody knows a program to equal these .
please treat this as a urgent..

hi can u give me solution for this iam facing same problem
thanks
raju

GR going to wrong GL account for PO Item with Account Assignment Category M

Hi Experts,
I need some help on GR posting for PO Item with M as AAC.
PO1 for material ABC with M as Account Assignment Category, when I book GR for this Item, the GL document generated as below.
Dr: PRD (Cost Price Differences)
Cr: WRX (GR/IR)
The material ABC price control is "S" and already have standard cost.
For another material DEF which have ascetically same master data as ABC and got a similar PO2 with M as Account Assignment Category.
But the GR document as below.
Dr: BSX (Inventory)
Cr: WRX (GR/IR)
How can be one same setting got so different results, is there any data in Material or PO make these differences?
Actually the results for material DEF is what we want, how could I avoid the GR results for material ABC.
Thanks~

Thanks you Mukthar,
I have checked all the information and porcess for both material and did a lot of testing in testing system.
Here is what I found.
Case
Material ABC SO: 1111 PO: 6666 (ACC:M)
Material DEF SO:2222 PO: 7777(ACC:M)
All the information in material mast data, SO, PO are the same.
The differences is that:
PO:6666 post GR before Material ABC's standard price release. So the first GR document as below
Dr: PRD (Cost Price Differences)
Cr: WRX (GR/IR)
This is correct document without material stand cost.
The problem we reverse the fist GR document, release standard cost for Material ABC. Then re-do the GR. but the GL document still book into PRD instead of BSX.
If I create a new SO:3333 and PO:8888 (with ACC M) for material ABC now.
The GR could be book into BSX.
It seem like once the PO got GR with 0 standard cost, even I relesed a new price for the material and re do the GR, it still take the previous 0 cost to book inventory which make all the amount into PRD.
Quite Strange

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Report that display 'Net Pay' by Empl for current and previous period.

Hi,
We are looking for a SAP report that display 'Net Pay' by Employee for current and previous period in USA payroll module. If you know of any, pl let me know.
Thanks in advance,
Niranjan

Thanks Archana and Sikindar.
We knew about this report, however, it gives information one below the other if we run, say for 2 periods, but what we are looking for is something as shown in example below
Empl #      Empl # Name    Prev Pay period Net Pay        Current Pay period net pay.
123              XYZ                     $ 1200.00                                 $ 1200.00
256              ABC                    $ 2000.00                                $ 3000.00
We want to run for 2 periods at a time and get the results as above. That way, payroll dept can run this report and compare if we are paying too much in current pay, compared to previous pay. This is basically to avoid any typos when they create new pay records in infotype 0008.
Niranjan

Wrong period selection for date entered

Dear Friends,
In payslip program, I have used HR report category (X_M00002) that shows two options (radiobutton) for period selection:
1. Current Period
2. Other Period
Problem is that when I enter other period as 01.2007 it displays salary slip of February 2007 instead of April 2007 though the period in selection screen on pressing the enter key shows 01.04.2007-30.04.2007.
This is a copy of another program which shows correct payslip for selected period.
What could the possible error be?
Regards,
Amit

>
Amit Srivastava wrote:
> I had missed to unmark a chackbox named 'Print retroactive runs' in the selection screen. Unmarking it solved the problem.
> Amit
Hi, Amit
Total Questions: 50 (33 unresolved)
Your most of the Question are still open as you have found the solution of your problem so please mark this question as answered and also the other your open question where you have go the Solution, Please
Best Regards,
Faisal

P & L report for current period,YTD and previous YTD

I am trying to create a P & L report with the columns for current period,YTD and previous YTD, I have include the measures as the key of columns, which by using period or YTD we can retrieve the current period and YTD column, is there as easy way to get the previous YTD? although I can get it by using evtim to het every month and calculate the previous YTD.

resolved, just need to bring both time and measures in the columns

SAP Exit for Current Posting Period

H All,
   I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately.   Can anyone please provide a sample code for "Current posting period".
Points will be assigned!
Thanks a lot!

Hi Sia
Here is some cmod code that might help:
These should be run in i-step = 1
DATA: l_period        TYPE t009b-poper,
          l_txt4(4)      TYPE c.
*Variable ZCCCFYEAR that defauts to current Fiscal Year
        WHEN 'ZCCCFYEAR'.
          l_txt4 = syst-datum(4).
          l_period = syst-datum+4(2).
*Handles FiscVarnt, period 6 is end of year so period 7 is new year
          IF l_period > '06'.
            l_txt4 = l_txt4 + 1.
          ENDIF.
          l_s_range-low = l_txt4 .
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
*Variable ZCCPPER that defauts to current Posting Period
Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
        WHEN 'ZCCPPER'.
          l_period = syst-datum+4(2) + 6.
          IF l_period > 12.
            l_period = l_period - 12.
          ENDIF.
          l_s_range-low = l_period.
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
Hope this helps
Josh

Archiving cost center line items for current period

Hi,
I was not able to archive & delete the cost center line items for current period.I was succesfull in deleting the past line items of the last periods.
Raj

Hi Rajesh,
I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
Check the following links:
For Archiving
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

Adustment for wrong period transaction

Actually, I have several invoice that is posted to wrong period, Since the previous period has been closed. I can't reverse the document and post to correct period again. So, how can I adjust this transaction in accounting. Can I post it to another G/L account? I do, how can I do that. Thanks!

Reopen the period and then reverse your document and repost them with the correct date.
I don't think if there is any other way except opening the period.

Payment Document reversed in wrong period

Dear All,
I need your help. I have reversed one Payment document in wrong period. Now Payment document is in period 09 while reversal document is in period 10.
Is there any way to undo this reversal or else change the period in the reversed document?
Here I need one suggestion as well. What will be the implication of this in period end closing activity?The payment document is closed and refering to reverse document as well.
What I know is for period closing system checks for only open items.
Please suggest on this.
Regards
Suchitra

Hi Satya
Yes You can do post with reference in F-02 and reverse the document.
But when you initially reverse the payment document the document will close now either you reverse reversed document or closed payment document. The new document will have status as open.
This open document will definetly effect month end closing.
I think solution suggested by Santosh is better one.
Regards
Suchitra

If one period is selected,Report is working fine, not for range of periods

Dear All,
i have a problem in nearly 3 reports of Finance
1) <b>Working Capital Requirement Report,</b>
if one period is selected, Report is working fine, but when range of periods is
given in selection screen, amount is showing wrong value.
2)<b>Balance_Sheet and 3) P&L_Statement report</b>Same problem
E.g Mar07 period will give the results for March08 period and Mar06 period will give the results for Mar07.
Ur valuable suggestion is rewarded.
Regards
venu

Hi,
check for your variable restrictions in the report key figures.
It will show up according to the rsctriction put there.
Try to verify the vlaues with the key figures and if they are amtching then you have some issues with the data loads.
But with your explanation it seems its just the you are looking at the wrong key figure( for actuals you are looking at previous year values)
Or you are using wrong restrcition values at the key figure level( indicators indicating prior values used for actual values).
Hope it helps
Thanks
Ajeet

Wrong period displayed for current period in HR Report Category

Similar Messages

Maybe you are looking for