Permission issue with new files

I am having a problem uploading files with Dreamweaver.
The strange thing is I am able to upload existing files, even
if they have been modified, but not new files.
for example I created a page
http://www.washpsa.org/test/events/test.html
If you go to the page you will find it is blank. That is the
file is there but it is empty.
I get this error message:
An FTP error occurred - cannot put test.html. Access denied.
The file may not exist, or there could be a permission problem.
Make sure you have proper authorization on the server and the
server is properly configured.
The people who I work with who use Contribute also get the
same message and are not able to upload files.
Nothing has changed that I am aware of when this started
happening.
Any ideas what is going on?

Ask your host.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TSemmes" <[email protected]> wrote in
message
news:fvamu9$97i$[email protected]..
>I am having a problem uploading files with Dreamweaver.
> The strange thing is I am able to upload existing files,
even if they have
> been modified, but not new files.
>
> for example I created a page
>
http://www.washpsa.org/test/events/test.html
> If you go to the page you will find it is blank. That is
the file is there
> but
> it is empty.
>
> I get this error message:
>
> An FTP error occurred - cannot put test.html. Access
denied. The file
> may
> not exist, or there could be a permission problem. Make
sure you have
> proper
> authorization on the server and the server is properly
configured.
>
> The people who I work with who use Contribute also get
the same message
> and
> are not able to upload files.
>
> Nothing has changed that I am aware of when this started
happening.
>
> Any ideas what is going on?
>
>
>
>

Similar Messages

Permission issue with moving files for windows

We run Quickbooks Enterprise on Macs. Parallels / Window 7 on iMacs for the client and data is on a Mac Pro. I am trying to move the data to an xserve, but the permissions get modified and quickbooks does not work, it gives me a -6000, -83 error.
The permissions on the Pro have "nobody Read & Write" and after the move to the Xserve they become "ghoberg Read & Write". I tried the following methods to move the data and all of them had the same results:
1) Copy;
2) ditto /Volumes/ghoberg/QuickBooks /Shared\ Points/Windows/Quickbooks
3) ditto -rsrcFork /Volumes/ghoberg/QuickBooks /Shared\ Points/Windows/Quickbooks
4) ditto /Volumes/ghoberg/QuickBooks /Users/graysonh/Documents/test
Any advise on coping the data over and keeping all the same permissions, etc?
Any other thoughts on moving Quickbooks over to the the xserve?
I can't get support from Quicken, because this is a windows software. We have been running windows quicken on macs for 4 or 5 years
Thank you
Grayson
My email is wrong, this is right
[email protected]

Ask your host.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TSemmes" <[email protected]> wrote in
message
news:fvamu9$97i$[email protected]..
>I am having a problem uploading files with Dreamweaver.
> The strange thing is I am able to upload existing files,
even if they have
> been modified, but not new files.
>
> for example I created a page
>
http://www.washpsa.org/test/events/test.html
> If you go to the page you will find it is blank. That is
the file is there
> but
> it is empty.
>
> I get this error message:
>
> An FTP error occurred - cannot put test.html. Access
denied. The file
> may
> not exist, or there could be a permission problem. Make
sure you have
> proper
> authorization on the server and the server is properly
configured.
>
> The people who I work with who use Contribute also get
the same message
> and
> are not able to upload files.
>
> Nothing has changed that I am aware of when this started
happening.
>
> Any ideas what is going on?
>
>
>
>

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

A serious issue with excel file read in ODI

hi gurus,
Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
Set objArgs = WScript.Arguments
For I = 0 to objArgs.Count - 1
FullName = objArgs(I)
FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
Set objExcel = CreateObject("Excel.application")
set objExcelBook = objExcel.Workbooks.Open(FullName)
objExcel.application.visible=false
objExcel.application.displayalerts=false
objExcelBook.SaveAs FileName & "csv",23
objExcel.Application.Quit
objExcel.Quit
Set objExcel = Nothing
set objExcelBook = Nothing
Next
Now this script convert the xls file to csv with comma seprated values
e.g in excel sheet if data is ABC XYZ PQR
csv will come with ABC,XYZ,PQR
here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
but if i change 23 with 124 its not working i getting the error cannot save as...
can anyone tell me that what should be the correct code for pipe
so that the output is ABC|XYZ|PQR
AS WE CAN USE THE SCRIPTS IN TOOLS
Edited by: 789141 on Sep 14, 2010 11:33 PM

I dont have the answer for your question but i have different approach in handling multiple Excel File.
Step 1. Copy a sample source Excel File and Call it Final.xls .
Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
Step 3. Do the Reversing and Map and test the Interface . Once its done.
Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
Step 7. Increment the Loop and copy your next File for Final and run the interface
Step 8 . Finally you will be able to read all the Excel File .
Step 9 . Delete the source file [ Optional ]
Hope this helps.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

Issue with Sender File FCC

Hi Experts,
I have an issue with Sender File FCC Adapter. The file being picked is of type TXT and it is tab seperated. The first line contains the field names and from next line onwards we have values for those fields.
The field names and field values are tab seperated. Even inserting a single letter in some field value manually disrupts the whole setup & alignment of the TXT file and the Sender File CC is unable to pick up the file from the shared folder. If the first file is errorenous and after that a correct TXT file is posted, it fails to pick up the correct file as it is trying to pick the errorenous file first.
The Error thrown is :
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'ABCD':java.lang.Exception: ERROR in configuration / structure 'ABCD.': More elements in file csv structure than field names specified!"
I have two questions:
1. Is there a way to handle such a scenario? For e.g., the errornous TXT file gets picked but throws error in PI.
2. Is there an alternative that the sender FCC channel picks up the correct files and filter out the errorneous ones ? ?
Thanks,
Arkesh

Hi Arkesh,
I think you are passing more number of fields than expected. Please check paramters defined and send the data accordingly.
In the processing parameters tab of sender file adapter, you have an option called Archive faulty source files, below to that you would have option to enter the " Directory for Archiving files with Errors".
I hope this helps you....
Thanks,

Issue with attachment file name

Hi All,
This is about an issue with attachment file name:
we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
Regards
kiran

we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
- <SAP:Payload xlink:href="cid:payload-4CED452F17C601BDE10080000A492050---sap.com">
<SAP:Name>1 .Header1.txt</SAP:Name>
Error we are getting is
Cannot cast 'Header' to boolean] in class com.sap.aii.mappingtool.flib7.NodeFunctions method createIf[Header, com.sap.aii.mappingtool.tf7.rt.Context---27a73bfa]
So we have to change the File name Header1.txt to something which we can cast to creatif....(we cannot tell the sendr to change the file name as its is set already)
Thanks for interste and assisting
Regards
Kiran

Issue with corrupted file when dragging to timeline

Has anyone ever had an issue with a files audio becoming corrupted when moving the file from the editing window to the timeline. I am also seeing the my camtasia mp4 becomes blurry on the timeline but plays fine in the editing screen.
I had not problem with camtasia Mp4s previously and today I have had so many issues with premier pro

Hi,
Even i faced this issue before...the problem with file adapter is the attribute nxsd:quotedBy takes " as default even if u dont mention it takes the same and now after the quotes it immediately expects | wch is not there in the data and it throws the error...now the fix for the problem is put some symbol for nxsd:quotedBy wch u never expect in the data some thing like less than or greater than symbol ....some thing like below
<element name="FieldTwo" type="string" nxsd:style="terminated"
nxsd:terminatedBy="|" nxsd:quotedBy="<"/>

Issues with RAW files from my 7D

I have Aperture 1.5.6 on my computer and the software updater says that is the current version. I shoot with a 20D and a 7D. I upload my raw files to Aperture and edit them from there and then process for a jpeg. However, every time I upload a raw file from my 7D I get the following message when I click on it to edit it: Unsupported Image format.
Any words of advice, other than just buy Aperture 3??

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

Sharpening issues with RAW files

Hi,
I have downloaded lightroom 5 as a one month trial and have been playing with the program. I am not an experienced user and are wondering if I am doing something wrong, have wrong settings applied or if it is the known sharpening bug that messes with my photos. I know that sharpening and noise reduction includes a bug that does not let you export pictures 1/3 of original size with sharpening/noise intact. However, in my case, this also happens with RAW files. I do not crop or change size/resolution to any of the photos, but the sharpening is still not working. Photos look great in develop mode, but when I click on library mode to export them, all sharpening disappears!
Is this the same bug previously reportered "only for pictures 1/3 of original size", or do I have some strange settings applied?
I was loving lightroom 5 up until I noticed this, and now I am reluctant to buy the product...
I'd be greatful if anyone has any input on this!
Thanks in advance

I have Aperture 2.X and had zero issues with RAW files from a 7D, so I think the problem is you are on 1.X. Converting to DNG first was a good suggestion if you don't want to purchase 3.X. Yet another reason to hate proprietary raw image file formats.......

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

Library files files are replaced with new files

Almost everyday, when i start iTunes my library files are replaced with new files & then i need to replce the new ones with my backup set

There are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one.
Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Permission issues with files put on desktop by Vista

Hi Folks,
I posted this before and got no response so I'm trying again.
Trying to finally solve an issue that has dogged me ever since upgrading to Lion in the summer. Since installing Lion 10.7 (clean install), I now seem to be having File Sharing issues with a fellow colleague who is on Vista. When trying to open a file placed on my desktop by this user (who has been set up as a "real" network user in Sys Prefs) I get the following message:
"You do not have permission to open the document "Some_Image.jpg".
Contact your computer or network administrator for assistance.
I have to do the following In order to gain access:
1. Unlock small lock icon in bottom right of Get Info Window
2. Enter Password in dialog that says "Finder wants to make changes. Type your password to allow this."
3. Click the now enabled plus sign below list
4. Select my self from the list of users
5. Change privilege to "Read & Write" in Privilege column adjacent to my user name.
Both Vista Machines do this to me although Windows 7 does not. UPDATE: one user has updated his vista install to WIndows 7 and I have this problem again.
I had hoped that the 10.7.3 update would have fixed this problem for me as I read that the update addresses some Networking issues, but it hasn't.
Any thoughts here?
Thank you,
J.E. Flynn

Oddly enough, I can't even seem to provide "Write Only (Drop Box)" access to the Windows clients.
My limited understanding of Widows networking and sharing is starting to rear it's ugly head.
If I set up File Sharing and give the windows client access to a shared folder. It can copy files but still I do not have access to those (as described above).
The only way I can get a Windows machine to access my Mac is for them to type my computers local IP in the Explorer address bar " \\192.168.1.XX " and login as me. Obviously, this is not desirable
All other attempts to login from a Windows client are now failing.

Permission issue with new files

Similar Messages

Maybe you are looking for