Permissions needed for user to define workflow variable

Hi all
im using a workflow on sharepoint designer 2007, running on list of customer orders. the workflow is trying to use data from customer list.
In the workflow i used the "define workflow variable" step on customer order list. the users who are using the order list have Contribute permission so they can add items. on the customer list they have read permission.
when an item is created, the workflow is suppose to generate the varieble by combining data from the two lists: selecting the customer from the current order item and suppose to combine it with data from the customer list for that specific customer
and keeps it in the variable.
for users with full control permission for the site, the workflow is completed ok. for the users with the contribute and read permissions it ends with an error and doesnt store the variable (i cheked it by storring the variables in the workflow history).
what are the permission needed to manage to do the action of storring the variable?
or any other ideas for the error?
Thanks in advance

Hello Cajuntank and welcome to the Palm forums.
Palm Desktop needs to be installed with the local administrator priviledge during the install of Palm Desktop, the HotSync Manager, the first HotSyn sync, and the installation of any third-party conduits on the desktop.
After that, the local admin rights can be revoked.
Alan G

Similar Messages

Permissions needed for Applying SQL Tuning Sets/SQL Plans 11g?

What permission are needed for a user to apply/activate sql tuning sets (sql plans) in 11g? The user can capture and move the the sql tuning sets from a 10g database to an 11g database but is getting "ORA-01031: insufficient privileges" when trying to activate/apply the sqlplans in 11g.
The user has:
ADMINISTER SQL MANAGEMENT OBJECT and ADMINISTER SQL TUNING SET and EXECUTE on SYS.DBMS_SPM
The user is an administrator for our Data Warehouse team but they do not have sysdba priviliges.
Do you also know of a good white paper that covers the step by step instructions and permissions needed for aquiring and applying/activating sqlplans?
If more information is needed in order to respond please advise.
Thank you

What permission are needed for a user to apply/activate sql tuning sets (sql plans) in 11g? The user can capture and move the the sql tuning sets from a 10g database to an 11g database but is getting "ORA-01031: insufficient privileges" when trying to activate/apply the sqlplans in 11g.
The user has:
ADMINISTER SQL MANAGEMENT OBJECT and ADMINISTER SQL TUNING SET and EXECUTE on SYS.DBMS_SPM
The user is an administrator for our Data Warehouse team but they do not have sysdba priviliges.
Do you also know of a good white paper that covers the step by step instructions and permissions needed for aquiring and applying/activating sqlplans?
If more information is needed in order to respond please advise.
Thank you

What is factory default "Sharing & Permissions" setting for User folders?

System:
Mac OS X Lion 10.7.2
MacBook Air (Mid 2011)
Single User – Administrative Account
Question:
What is factory default “Sharing & Permissions” setting for User folders (Desktop, Downloads, Library, Movies, Music, Pictures, Public), subfolders, and documents and other contents?
I’m thinking the factory default “Sharing & Permissions” for all of the above (except Drop Box in the Public folder) is as follows, but not certain.
Name                          Privilege
myusername (Me)    Read & Write
staff                            Read only
everyone                   Read only

Are these also the settings on your Documents folder and the various files in the Documents folder? Same question for your Library folder?
Name                          Privilege
myusername (Me)    Read & Write
everyone                   No Access

Local NTFS permissions needed for Palm software?

Does anyone know the NTFS permissions needed on the local computer for a standard user to run the Palm software?
Post relates to: Palm TX

Hello Cajuntank and welcome to the Palm forums.
Palm Desktop needs to be installed with the local administrator priviledge during the install of Palm Desktop, the HotSync Manager, the first HotSyn sync, and the installation of any third-party conduits on the desktop.
After that, the local admin rights can be revoked.
Alan G

Test Links for Users OUTSIDE the Workflow

Hello,
In our company we have a process where updates are requested, then someone makes the updates and then a test link is sent to the requestor so they can review and approve. This is all pre-UCM, we have been working in another CMS and are moving to UCM now. The question that has arisen is how can users that are NOT in the workflow or dont even have users accounts view the content on the server?
Basically when we send test links to the requestor they often send to their coworkers etc... for further review and from what we are being told about workflows is that ONLY the users IN the workflow can see the updates on the site in the browser.
Is there a "work a round" to this? How can we allow anyone to see updated content on our test site?
Could we create a Generic Guest account that has read to all content and is in all workflows? What have you experenced in your implementations and how have you resolved?
Thank you
Brett.

WOW, no one has run into this type of situation. Amazing. well then... hmmmm.....

Help needed for User-Defined Datatype

Hi All,
I have one table which has User-defined Column Datatype.
Now Client wants us to rename the User-Defined Datatype for some Standardization process.
How to do rename of it, coz Rename old to new doesnt work in Oracle 10.2.0.4G for TYPES.
So we re-created it with the new names. Now our Problem is how do i re-assign the column datatype with the New User-Defined DataType.
Regards,
Prathamesh

The Only Solution that i could found was - Create a new column with new User-Defined Datatype, copy the old column values to New Column, then drop the old column and rename the new Column to Old Column
ORA-22859:     invalid modification of columns
Cause:     An attempt was made to modify an object, REF, VARRAY, nested table, or LOB column type.
Action:     Create a new column of the desired type and copy the current column data to the new type using the appropriate type constructor.

Permissions needed for SCOMAction account

Hi, can anyone give me precise answer for this question: Which permissions SCOMAction account does need to have in order to SCOM 2012 R2 work properly?
I found on many sources that SCOMAction account DOES need to be member of local administrators group on all computers agent was deployed to. Having installed agents only on all my domain controllers using my domain admin account I have not experienced any
problems yet - since DCs do not have local administrators group if above is a MUST that means I would have to give SCOMAction account domain admins right i.e. put it into domain admins group which certainly is huge overkill (in that case SCOMAction account
would be automatically local administrator on all domain computers).
I have to repeat again: I deployed agents to all my DCs using my domain admin account - SCOMAction account does not have any special permission except being local administrator account on SCOM server itself along with SCOMDataAccess, SCOMDataReader
and SCOMDataWriter accounts. Everything works well but there is a possibility something is wrong because of the fact that SCOMAction account does not have needed perms on DCs and I have not noticed yet. Almost 10 hours passed since I deployed agents to DCs
and start monitoring them (I have imported Windows Server MP, AD MP, GPO MP, DFS-R MP, DNS MP . . .) - I have not noticed any errors caused by lack of perms for any of SCOM accounts.

SCOM Action account does not required to be local administator of agent machine
The action account is used to gather information about, and run responses on, the managed computer (a managed computer being either a management server or a computer with an agent installed). The MonitoringHost.exe processes run under the action account or
a specific Run As account.
You may use local system or domain account for agent action account.
For Domain user agent's action account, you can use a low-privileged account by ensurin that the account have the following minimum privileges:
• Member of the local Users group
• Member of the local Performance Monitor Users group
•“Allow log on locally” permission (SetInteractiveLogonRight)
https://technet.microsoft.com/en-us/library/hh212808.aspx
Roger

Permissions needed for mobile account file sync

Hello,
I have set up my account as mobile account in an AD domain.
When FileSync syncs the files automatically, then I often get errors as follows:
File xyz could not be synced.
Permission denied.
What permissions does FileSync need to work correctly?
Regards
Florian

SCOM Action account does not required to be local administator of agent machine
The action account is used to gather information about, and run responses on, the managed computer (a managed computer being either a management server or a computer with an agent installed). The MonitoringHost.exe processes run under the action account or
a specific Run As account.
You may use local system or domain account for agent action account.
For Domain user agent's action account, you can use a low-privileged account by ensurin that the account have the following minimum privileges:
• Member of the local Users group
• Member of the local Performance Monitor Users group
•“Allow log on locally” permission (SetInteractiveLogonRight)
https://technet.microsoft.com/en-us/library/hh212808.aspx
Roger

Time Machine Backup [Update Needed] for User

So I made a time machine backup of my MacBook Pro to put on my MacBook Air, and when I did it created 2 users. One says Administrator (my normal one) and the other says [Update Needed]
However, when I log on to the [Update Needed] user, everything is the exact same. I just cant figure out what update it's referring to. When I go to system preferences > Users/Groups, only the Admin user is listed there.
Any ideas on how to fix?

dgordon412 wrote:
(80 GB, had only 200 MB free)
That's likely corrupted your system. You should have a minimum of 10% - 15% free at all times. That's almost certainly why it wouldn't restart.
even though i just erased everything, and 74.2 GB show as free.
There must be something else on the drive; if you erase it, it should have just under 80 GB free. Is there another partition?
Did you erase with a Leopard Install disc or a Snow Leopard disc? If you used a Leopard disc, that might explain showing only 74.2 GB free (it counts differently).
If so, use your +Snow Leopard+ install disc to do a complete reformat, and try to restore the backup. A Leopard disc cannot restore a Snow Leopard backup. Even the Snow Leopard disc may not work, as it's just too full and/or your system was damaged by getting too full.
All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless.
Having an OSX drive that full will make your Mac extremely sluggish, cause data corruption and/or loss, apps to crash, etc.
Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.
If you can get your Mac running, you need to make several GBs of space immediately.
If all else fails, reformat the internal HD and install OSX from your Snow Leopard Install disc, then use +Setup Assistant+ after the Welcome video to transfer +*most, but not all+* of your stuff from the backup. Omit the contents of one or more large sub-folders in a home folder (such as Photos, Music, or Movies).
See #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.

ST03N - process needed for user to perform this function

Hello,
Frequently, our auditors request ST03N information that we run for them and send to them. this information includes the number of users logged on in a certain period, the transactions that theuser has executed in the certain period, the number of times a tcode was executed in a certain period. we would like to create a process where the auditors could perform this themselves.
I am looking for a way to accomplish this. I would to create a something that could call ST03N with the selction criteria by the auditors , but I am not sure if ST03N can be called in the program and pass the parameters. I am also looking at using the CDHDR and CDPOS tables to get the information.
my question is if anyone has done anything like this before and if so, what process did you use.
I am also looking for any others ideas on how to do this and if the ideas that I mentioned above would work
thanks in advance for the help.

Please check this code, its working fine for me
select instshort from sapwlserv into rsystem
                                  up to 1 rows
                                where host = sy-host.
endselect.
data : speriod(1) type c default 'D', "Period type D, M, Y
call function 'SAPWL_WORKLOAD_GET_STATISTIC'
        exporting
          periodtype                    = speriod
          hostid                        = rsystem
          startdate                     = sdate
          only_application_statistic    = 'X'
        tables
          application_statistic         = tt_summu
        exceptions
          unknown_periodtype            = 1
          no_data_found                 = 2
          others                        = 3.
a®

App Pool Account permissions needed for People Picker

Greetz!
The peoplepicker runs under the credentials of the application pool the site is running in. However I am not able to retrieve users from Active Directory. What rights does this account need on AD, if any?
Love them all...regardless. - Buddha

I verified that the sAMAccountName matches what I'm entering. When I used your Peoplepicker Port Tester I ran it as an admin and when I clicked search I got an errot that said it had stopped working:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: peoplepicker port tester.exe
Problem Signature 02: 1.0.0.0
Problem Signature 03: 54d84550
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 526717bd
Problem Signature 07: 20ce
Problem Signature 08: 100
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1033
I believe I got that error because I added a CN which perhaps wasn't correct. When I removed the CN and just used 2 OU identifiers the tool connected to the client forest. I have failures in UDP 88, 135, 137, 138, 389, 445 and 749. Some are because
the response wasn't timely. Some because they were 'forcibly closed' by the remote host.
I am in a 2 way trust between separate forests. My SA says there are not ports closed between my server and the AD. When I run the port test tool is there a requirement that I be on a specific service where a particular SharePoint service is running? I ran
it on the app server and got the results above. When I run it on the web front en all ports just say 'connection failed'
TCP/389 connection failed
TCP/636 connection failed
TCP/135 connection failed
TCP/137 connection failed
TCP/138 connection failed
TCP/139 connection failed
TCP/3268 connection failed
TCP/3269 connection failed
TCP/53 connection failed
TCP/88 connection failed
TCP/445 connection failed
[Opt]TCP/749 connection failed
[Opt]TCP/750 connection failed
No such host is known
Love them all...regardless. - Buddha

Urgent help need for user exit

Hi all,
i have just did one user exit but in RSA3 field is not coming. in step 1 i modified the extract structure. in step 2 in added field in include program ,saved and activated it. but field is not coming in RSA3. can anyone plese help me what should i do now or what has went wrong.
in RSA3 update mode is 'F'
thanks in advance

hi,
Have you created a project in CMOD and included your User exit component(RSAP0001) and activated it?.
check that. otherwise give some more details reg. your problem.
rgrds,
v.sen.
Message was edited by:
Senthilkumar Viswanathan

Permissions needed for sql server job to execute stored procedure on linked server?

Hi all
I have a job step which attempts to call a stored procedure on a linked server.
This step is failing with a permission denied error. How can I debug or resolve this?
The job owner is sysadmin on both servers so should have execute permission to the database/proc I'm calling, right?
The error is:
The EXECUTE permission was denied on the object 'myProc', database 'myDatabase', schema 'dbo'. [SQLSTATE 42000] (Error 229). The step failed.
My code is:
EXEC [LinkedServer].myDatabase.dbo.myProc
Also tried:
SELECT * FROM OPENQUERY([LinkedServer], 'SET FMTONLY OFF EXEC myDatabase.dbo.myProc')
With the same result.
Any help appreciated.

The job owner may be sysadmin on the remote server. The service account for SQL Server Agent may not. And it is the latter that counts, since the it the service accounts that logs in and impersonates the job owner. But the impersonation inside SQL Server
does not count much in Windows, and it is through Windows connection is made to the other site.
One way to resolve this is to set up a login mapping for the job owner. The login mapping must be for an SQL login on the remote server.
You can verify the theory, but running this query from the job:
SELECT * FROM OPENQUERY([LinkedServer], 'SELECT SYSTEM_USER')
By the way, putting SET FMTONLY OFF in OPENQUERY is a terrible idea. This has the effect that the procedure is executed twice. (Unless both servers are SQL 2012 or higher in which case FMTONLY has no effect at all.)
Erland Sommarskog, SQL Server MVP, [email protected]

Best practices for defining Environment Variables/User Accounts in Linux

Hello,
After reading throught the Quick Install guide for 10gR2 on x86_64 Linux, I see that it is not recommended to define ANY variables in .bash_profile.
I'm hoping to get a Best practices approach for defining environment variables - right now we use the oracle linux account for administration including sql*plus. So, where should the myriad variables be defined? Is it important enough to create a user account in linux to support best practices?
What variables, exactly, should be defined? It seems that LD_LIBRARY_PATH is no longer being used?
Thanks in advance
Doug

Something that I've done for years on unix/linux boxes is to create a seperate environment variable setup file for each instance on the box. This would include things like ORACLE_HOME, ORACLE_SID, etc. Then I would create an alias in my .bash_profile that would execute this script. As an example, I would create a orcl.env file that would hold all of the environment variables for this instance. Then in my .bash_profile I would create a line like the following:
alias orcl=". $HOME/orcl.env"
Then from anywhere you could type orcl and you would set your environment to connect to that database.
Also, if you are using 10g, something else that is really nice if you are using sqlplus, and you connect to different databases without starting a new sqlplus session is to set a parameter in your $ORACLE_HOME/sqlplus/admin/glogin.sql file:
set sqlprompt "_user 'at' _connect_identifier >"
This will automatically change your command prompt to look like this:
RALPH at ORCL >
if you connect as GEORGE, your prompt will immediately change to :
GEORGE at ORCL >
This way you can always know who and where you are connected to.
Good luck!

What permissions does a user need to be able to access a document library's workflow settings menu?

A group has created some out of the box SP 2010 workflows in a standard document library.
Some users have the "Workflow Settings" icon available to click on, but other staff only see a grayed out icon.
I have been trying to determine what change is needed to a user's access to the library so that they can add or access workflows.
Thank you

I believe it is the "Manage Lists" permission that they need. Owners and Designers permission levels have this by default.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Permissions needed for user to define workflow variable

Similar Messages

Maybe you are looking for