Permissions on virtual directory

I have created virtual directory with adding property to virtual server via admin console. However, how do I set read/write permissions on this directory. Glassfish is running on Windows 2003 server. This is Glassfish 3.2
Edited by: Bob T. on Jun 3, 2012 9:34 PM

Similar Messages

Upload client to server virtual directory - Urgent

Hai experts,
Now i am doing a intranet project.
In that project, user has to upload his
own datas. That data has to be stored in
my virtual directory(c:\ramesh). From the
virtual directory i will take the user
files thru my procuedures.
How to copy the client file to my virtual
directory thru Portal.
It is very urgent me, Please give me
any solution
Regards
Ramesh.G

CGI PERL Example to Upload Files
Step 1:
add two directories on httpd.conf file:
/example_cgi/html/ NR /html/
/example_cgi/cgi-bin/ CR /cgi-bin/
Restart Apache.
Step 2:
Copy the ex.html to the /example_cgi/html/ directory.
Copy the ex.pl to the /example_cgi/cgi-bin/ directory.
(both files are listed in the bottom of this NOTE)
Step 3:
Edit the ex.pl file to change the destionation directory on the Web Server,
the user that launched the file must have written permissions in this
directory. Set execute permissions on this file via chmod. Change also the
first line of the file to the directory where you installed the PERL
interpreter. Also change the donepage, to some result page that you want.
Step 4:
Call the page, by using http://host:port/html/ex.html, browse and find 1 or 2 files in the local
system, and press the Upload button, the files will be written in the Web
Server machine in the directory specified in the ex.pl file.
Files:
ex.html:
<html>
<body>
<form method="POST" action="/cgi-bin/ex.pl" ENCTYPE="multipart/form-data">
File 1:
<input type="file" name="FILE1">
<br>
File 2:
<input type="file" name="FILE2">
<br>
<input type="submit" value="Upload!">
</form>
</body>
</html>
ex.pl:
#!/usr/local/bin/perl
## Path to where you want your files written to.
## Attention: do not use a trailing slash
$basedir = "/tmp";
## The page you wish it to forward to when done:
## I.E. http://www.mydomainname.com/thankyou.html
$donepage = "http://www.oracle.com/";
# Do you wish to allow all file types? yes/no (no capital letters)
$allowall = "yes";
# If the above = "no"; then which is the only extention to allow?
# Remember to have the LAST 4 characters i.e. .ext
#$theext = ".gif";
use CGI;
$onnum = 1;
while ($onnum != 11) {
my $req = new CGI;
my $file = $req->param("FILE$onnum");
if ($file ne "") {
my $fileName = $file;
$fileName =~ s!^.*(\\|\/)!!;
$newmain = $fileName;
if ($allowall ne "yes") {
if (lc(substr($newmain,length($newmain) - 4,4)) ne $theext){
$filenotgood = "yes";
if ($filenotgood ne "yes") {
open (OUTFILE, ">$basedir/$fileName");
print "$basedir/$fileName<br>";
while (my $bytesread = read($file, my $buffer, 1024)) {
print OUTFILE $buffer;
close (OUTFILE);
$onnum++;
print "Content-type: text/html\n";
print "Location:$donepage\n\n";
Good Luck.

Virtual directory pemissions

I have created virtual directory with adding property to virtual server via admin console. However, I do I set read/write permissions on this directory. Glassfish is running on Windows 2003 server.
Bob

Chris,
VDS is a component of the IdM suite, but is not required for operation.
It is, however, required for integration with SAP HCM or SAP GRC.
Matt

Virtual directory in region header background-image not working

I created a region with a region header that needs the background image to repeat vertical as well as horizontal, so the class was changed to include repeat instead of repeat-x.
So i replaced class t20RegionHeader with this:
.t20RegionHeader {
vertical-align: center;
font-weight: normal;
font-size: 9pt;
font-weight: bold;
color: #343434;
background-image: url(/i/hdingBar-BG.gif) ;
background-repeat: repeat;
text-align: left;
padding: 1px 8px;
white-space: nowrap;
border: 1px solid #a3bed8
I put "/i/" in the background-image's url bacause I am referencing an image in the virtual directory but it didn't work. Please help!!
I have it on APEX.ORACLE.COM:
Workspace: RGWORK
User: TESTER
Password: test123
Application: 41237 CreativeTest
Page: 11
APEX: Application Express 4.0.2.00.07
DB: Oracle 10.2.0.4
Robert
http://apexjscss.blogspot.com

sect55 wrote:
I created a region with a region header that needs the background image to repeat vertical as well as horizontal, so the class was changed to include repeat instead of repeat-x.
So i replaced class t20RegionHeader with this:
.t20RegionHeader {
vertical-align: center;
font-weight: normal;
font-size: 9pt;
font-weight: bold;
color: #343434;
background-image: url(/i/hdingBar-BG.gif) ;
background-repeat: repeat;
text-align: left;
padding: 1px 8px;
white-space: nowrap;
border: 1px solid #a3bed8
<tt>center</tt> is not a valid value for <tt>vertical-align</tt>: should be <tt>middle</tt>.
Firebug reports "Failed to load the given URL" for <tt>/i/hdingBar-BG.gif</tt>. Does this image exist at that location? (Are you talking about apex.oracle.com or your local environment? If it's the latter, check that the <tt>hdingBar-BG.gif</tt> image file exists at the location specified by the virtual directory <tt>/i/</tt> and that the permissions are set to make it readable.)

Virtual Directory in IIS7

I have a web site on our IIS Server and I want it to be able to access files on our fileserver. I have created a virtual directory to the folder on the File server but I am unable to access any of the files on the folder. I get System.UnauthorizedAccessException: Access to the path is denied.I have tried using pass through security and have given my server IIS server permission to the fileserver folder, but that did not work. I have created a domain user and granted permission to the user to the folder and tried connecting as specific user and that did not work. I have even set the folder up to allow everyone permission and it still gets the same error.How can you set up an iis website to access files that are kept on a separate file server. I have read a number of post and I know this is possible but trying to figure out what I am...
This topic first appeared in the Spiceworks Community

sect55 wrote:
I created a region with a region header that needs the background image to repeat vertical as well as horizontal, so the class was changed to include repeat instead of repeat-x.
So i replaced class t20RegionHeader with this:
.t20RegionHeader {
vertical-align: center;
font-weight: normal;
font-size: 9pt;
font-weight: bold;
color: #343434;
background-image: url(/i/hdingBar-BG.gif) ;
background-repeat: repeat;
text-align: left;
padding: 1px 8px;
white-space: nowrap;
border: 1px solid #a3bed8
<tt>center</tt> is not a valid value for <tt>vertical-align</tt>: should be <tt>middle</tt>.
Firebug reports "Failed to load the given URL" for <tt>/i/hdingBar-BG.gif</tt>. Does this image exist at that location? (Are you talking about apex.oracle.com or your local environment? If it's the latter, check that the <tt>hdingBar-BG.gif</tt> image file exists at the location specified by the virtual directory <tt>/i/</tt> and that the permissions are set to make it readable.)

How Create Virtual Directory On Oracle Application Server 10g on RHEL 5

Dear Sir
i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
/treas/temp
now i simply have to open these text based reports on web browser
WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
but for that i need to create virtual directory name : " /pcreport " without code
kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
<virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
kindlly help

(My paths shown, yours will be different)
In a text editor :
/u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
Add
Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
<Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Create the pcreport directory.
Add a simple test page
vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
<html>
<head>
<title>Simple test page </title>
<style type="text/css">
body {
margin-left: 20%;;
margin-right: 20%;
border: 1px dotted gray;
padding: 10px 10px 10px 10px;
</style>
</head>
<body>
<p>test!</p>
</body>
</html>
Test
http://yourserver.com:7777/pcreport/test.html
Best Regards
mseberg

Creation of virtual directory for EPMA during 11.1.2.2 configuration

Hi Experts,
I was trying to install and configure the EPM 11.1.2.2 products on a POC machine with Windows 2008 R2. I was able to install and configure some products and i was facing issue with the EPMA configuration where it struck during "Creation of EPMA virtual Directory". I can see the virtual directory created but not sure why this is not finishing up and just struck at this level, deployment is all fine. Attached the config log for any reference
I have enabled Windows authentication in IIS 7 and disabled Basic authentication
Please let me know if anyone has come across this issue and thanks for your help
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01496] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] IIS version is 7
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01516] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Removing virtual directory: hyperion-bpma-server
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: removeVirtualDir
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01508] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating virtual directory: hyperion-bpma-server(2:2), configRoot: C:\OracleEPM\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\WebService
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01504] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating application pool: DefaultAppPool
[2012-11-14T11:33:52.745-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createApplicationPool
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: Updating .Net version of application pool...
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: .Net version v2.0 will be used
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: updateApplicationPoolManagedRuntime
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01510] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Using default application pool for hyperion-bpma-server
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createVirtualDir
[2012-11-14T11:34:00.997-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: installAspDotNet
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [TRACE] [EPMCFG-07380] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.utils.os.windows.IisUtils] Getting IIS7 Default site name
Regards

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

How to set up a virtual directory on Application Server

The environment of my application is Application server 9i version 2, on windows 2000, form 9.0.2.
I am trying to get the ORACLE 9i forms show_document to work.
I have successfully created an out file in the server directory.
I need the document to be displayed by the form.
Let me tell you more about my server.
I installed Oracle application server on drive E.
I copied my application to drive E and named PY which has 4 folders including :
E:\PY\fmb (for fmb)
E:\PY\forms (for fmx)
E:\PY\sql (for sql programs)
E:\PY\locrep (for lst files which are generated from sql programs)
Someone told me I should create a virtual directory, e.g. docs, in your httpd.conf file to point to e:\py\locrep
I've seen 4 httpd.conf files so I don't know which one I should modify and what should I type in exactly on what part ????
E:\ora9ias\apache\apache\conf\httpd.conf
E:\ora9ias\apache\apache\conf\httpd.conf.default
E:\ora9ias\apache\apache\conf\httpd.conf.smibak
E:\ora9ias\dcm\config\plugins\apache\httpd.conf
After I modify the httpd.conf file, so what will my URL be ? Also, I have a lot of reports, I would like to run different reports at the same time ??????
Thank you very much.
Trang

The best way to edit httpd.conf is using Enterprise Manager Website. Open this site (http://machine:1810) and drill down on your application server, and then on HTTP Server. Open link Advanced server Properties. Now you see a list of all configuration files. Click on a file to open it.
To add the virtual path:
- You could best add your virtual path in file forms90.conf (it is included in httpd.conf with the <include> tag).
- Within this file you already find some virtual path definitions: Look for the AliasMatch tag, e.g. for the 'forms90/html' virtual directory.
- Copy this line and change 'html' into the directory name you like to use, e.g. 'myfiles'. Map it to the physical directory (on your E: drive) where your files are. (E: must not be a network drive, however).
- browse to your files using: http://machine:7777/forms90/myfiles/filename.
Peter

EMC Crash when i try to - reset client access virtual directory

Hi All,
I have one exchagne server 2010 sp3 rollup 7 installed on server 2012R2 Std.
When i try to reset client access virtual directory the MMC is crashing.
In the event viewer i can find 3 error after to crash:
1.
The program mmc.exe version 6.3.9600.17415 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2360
Start Time: 01d04e7b531a4a0d
Termination Time: 4294967295
Application Path: C:\Windows\system32\mmc.exe
Report Id: 69db84d3-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
2.
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.OnThreadException(Exception e)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
3.
Faulting application name: mmc.exe, version: 6.3.9600.17415, time stamp: 0x54504e26
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x2014
Faulting application start time: 0x01d04e9e432feaef
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b8276755-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
When i try to preform the task from EMC that installed on my PC (Win 7 SP1 x64) everything works fine
Thank you.

Hi Eliran,
Thank you for your question.
Are there any update recently?
We could refer to the following steps to troubleshoot:
1)disable A/V
2) Run: DISM.exe /Online /Cleanup-image /Restorehealth
http://support.microsoft.com/kb/947821/en-gb
3) follow http://support.microsoft.com/kb/929833/en-gb to upload %WinDir%\Logs\CBS\CBS.log
4) disable snap-ins exept DNS-snapin
5) run SDP
6) enable A/V
We could also re-install .Net 4.0 to check if the issue persist by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=17718
If the issue persist, we could install Exchange 2010 SP3 CU8 by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=45225
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Use of AppSet virtual directory in BPC70MS

We are running OutlookSoft CPM 4.2 and using appset virtual directory directly.
The appset virtual directory is created by default in OutlookSoft CPM 4.2.
For example:
- Open input schedule through the virtual directory by Workbook.Add method from another input schedule.
- Save some kinds of data through the virtual directory by Workbook.SaveAs method.
However, there is no appset virtual directory in BPC 7.0 MS by default.
Therefore we have created the virtual directory by hand.
It seems that the virtual directory works fine when the client is Windows XP.
But there is a problem when the client is Windows Vista.
When we access the input schedule directly from the virtual directory,
the authentication dialog box appears for the first time in the Excel session.
We would like to omit the authentication dialog box because it is annoying for users.
Does anyone have some idea to solve this problem?

Using a virtual directory outside of osoft that's means you are not longer into SAP BPC.
So the authentication in that case it pure IIS authentication.
IIS authentication is Intergrated Windows authentication (using windows credential for login) or Basic authentication.
You are using IE for connection to IIS which means you have also security setttings from IE.
For example you have the setting for security that "prompt always user name and pwd" into IE.
Tools- Internet Option- Security
Click what kind of site it is your site: Intranet, or trusted site or Internet. and after that click to Custom Level and go to User Authentication.
If there is prompt user name and pwd then for sure every time when you will access any site (from coresponding group. Internet, Intranet or trusted sites) you will be always asked to input user name and pwd.
So first level of authentication for BPC is IE and IIS authetntication. In your case you don't pass this level of authetication.
I hope this will help.
Again it is not a good practice to have virtual directory outside of OSOFT. When you will do a transport into other enviroment it will represent again an issue.
Regards
Sorin Radulescu

How can I use a relative path in a Virtual Directory tag?

That is probably a bit vague, so I will explain in more detail. We are using BEA
WL Portal 7.0 and our team is developing multiple portal applications. We have
a core set of portlets (consist of JSPs) that we need to reuse in multiple portals
(Web Apps), however from a version control perspective they need to reside in
one common location. So, the solution I came up with is to use a virtual directory
for the the common directory and add this to weblogic.xml for each web app. This
works fine. However, each developer has different directory names for their project...ClearCase
view names to be specific... plus we have integration views, QA views, etc...
so we can't have any "C:\mystuff\mydomain" absolute paths anywhere in the portal
configuration. Does anyone know of a way to use a relative path for a virtual
directory? I have tried various versions of ../../ for example to try to backup
and then recurse down to the directory, but this is not working. Any ideas?
By the way this is basially just a hack for development, when we package the WAR
for QA, Prod, etc... we copy needed files and there are no virtual directories.
In other words, I don't care how "creative" solution is :)
This is what I have right now, which I need to replace with a relative directory
name:
<virtual-directory-mapping>
<local-path>C:/Projects/TouchPoint_v1.0_Fix/tp_portal/bipiportals/beaApps/portalApp/tp-shared</local-path>
<url-pattern>*</url-pattern>
</virtual-directory-mapping>

Well, in fact you can in a special case :
- The file you want to access is in the same directory than the applet (or in a sub-directory)
If this condition is OK, you can open the file using :
java.io.InputStream MyInputStream = <YourAppletClassName>.class.getResourceAsStream("sidira_interactif2.svg")
With this stream, its easy to read the file content.

How to define a virtual directory for 1virtual server?

Hi there,
The last part is always the hardest. I succesfully converted my Apache configuration to the SunONE setup but one section and I fail to grasp where I'm going wrong...
SunONE Webserver 6.1SP5, I have quite a few virtual servers divided over several virtual classes. And now I'm trying to configure a 'virtual directory' (pfx2dir nametrans) limited to a single virtual server but no matter what I try I can't get it to work...
In the administration guide I read about the NameTrans directive and how it should be used in the default object (in obj.conf ofcourse). So when I have something like this all works as it should, but for all virtual servers in the class:
<Object name="default">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Object>So when reading up even more I came across the NSAPI programmers guide which explained that you can have both <Object> and <Client> tags. Because of the 'urlhost' parameter with the Client tag I figured that it should be possible to limit the NameTrans line mentioned above to but one virtual server:
<Client urlhost="catslair.intranet.lan">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Client>But whenever I use this approach the server refuses to start and presents me with an error:
[13/May/2006:16:38:10] config (19621): CORE3185: Invalid configuration: File /usr/local/sun/SUNWwbsvr/https-magi.intranet.lan/config/server.xml, line 178, column 99: HTTP3258: Error processing Mirrors.obj.conf line 51: HTTP2215: directive outside objectAt first I didn't understand exactly what it meant, I even stumbled upon a bug report which triggered the same error (http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4979377) but after reading up on this I can only conclude that NameTrans can only be used within an <Object> block. The manuals also hint into this direction since it becomes obvious that the preffered approach is using this in the default object.
So picture my surprise when I came across http://docs.sun.com/source/817-6252/npgobjcn.html#wp1041206 in the NSAPI programmers guide, its past the table. One of the examples shows this approach:
<Client odds="25%">
NameTrans fn="redirect" from="/Pogues" url-prefix="http://pogues.example.com"
</Client>Because I was sure about urlhost being a parameter for the Client tag I tried copying the above example, but when I give it a try I'm once again greeted with the error I mentioned earlier "directive outside object".
So can anyone please point me in the right direction? Is it possible to setup a virtual directory for a single virtual server and if so how do I proceed since <Client> doesn't seem to work. thanks in advance for any tips you can give me.
Message was edited by:
Lion-O

Thanks a lot for the example, that fixed the problem.
I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening.

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

How do I create a virtual directory in Snow Leopard Server Admin program?

Hi, how do you use the server admin program in snow leopard server to create an apache virtual directory? I can't see it in the applet anywhere. Thank you.

Well this is what I thought too but I don't think I'm doing something right. I have a default website on port 80 and I created a second site on the same port. They are two different websites. One is the initial one that comes stock with the osx. The second one I created.
When I browse to my server I get the second site. How can I get the default to be the one that points to the mail, wiki, calendar stuff, while my second domain is something totally different.
http://myserver (should be the default stuff like mail.)
http://myserver/mysecondsite (should be my other stuff.)
The problem is that when I go to http://myserver it is going to http://myserver/mysecondsite
What am I doing wrong? Thank you.

Error in setting permissions on file/directory $ORACLE_BASE/jre/1.1.8/LICEN

Hi,
On installing Oracle 9.2 on RedHat Linux release 4, I encounterd the
following error:
Error in setting permissions on file/directory
$ORACLE_BASE/jre/1.1.8/LICENSE
This error is encountered at the inital stage of installation after inputing all the
required settings in the OUI. and at the Installing Java Runtinme Environment 1.1.8.1.0
Could someone tell me why it happened and how to fix it? Your help is
much appreciated.
There was a post on this topic only in here and said to change the permissions of the
ORACLE_BASE .......... I have tried out all these and all the permissions and the environment settings are correct but i'm not able to proceed with the installation even after a lot of trying.
All you guys help is verry verry appreciated..........
Thanks,

Do the following and post the results:
cd $ORACLE_BASE
pwd
ls -al
cd jre
pwd
ls -al
cd 1.18
pwd
ls -alI can't imagine anyone making recommendations without seeing what you've done.

Permissions on virtual directory

Similar Messages

Maybe you are looking for