Persistent user customisation not saved for column resize

Using 11.1.1.1.0 I've configured persistent user customisations via MDS (as per [http://biemond.blogspot.com/2009/07/customize-and-personalize-your-jsf.html]) but I'm having a problem with column customisation. In adf-config.xml I've selected displayIndex, visible and width as persistent attributes on the column tag.
My customisations are saved from one session to the next (works great!), however changes to the width of a column only seem to be persisted if a further, more significant layout change is made to the table afterwards.
For instance, if I do the following:
- Login
- Resize a column
- Close the browser
Then the column width is reverted the next time I log in.
If, however I do the following:
- Login
- Resize a column
- Re-order a column
- Close the browser
Then the column width is saved (along with the new column order) the next time I log in.
So, it appears that column width persistence is working, but column width changes on their own do not cause a persist operation; an additional layout change is required to get ADF to save the width details.
Has anyone observed similar behaviour? Can anyone suggest a workaround/fix?

Hi,
sounds like a bug that you should file if you can exclude that your configuration is wrong. I checked for known bugs but did not find one that fits to the problem you report
Frank

Similar Messages

  • Need a program which finds out if a user has not logged for 3 days?

    HI,
       I NEED A PROGRAM WHICH FINDS OUT IF ANY USER HAS NOT LOGGED FOR THREE DAYS
        AND SEND A MAIL TO THE BASIS TEAM.IT SHOULD BE SHEDULED AS A BACKGROUND PROCESS.
    I SEARCHED IN GOOGLE BUT NOT ABLE TO FIND IT.
    PLEASE HELP ME OUT WITH THIS.
                    REGARDS,
                          MANI

    use table USR02 and analyse field field TRDAT
    X = sy-datum - usr02-trdat.
    -> if x ge 3...
    for mail use e.g. fm SO_NEW_DOCUMENT_ATT_SEND_API1
    hope that helps
    Andreas from germany

  • Shared Services Console - User is not authorized for the action

    Hi,
    I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
    When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
    User is not authorized for the action
    This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
    The service for EAS is started properly. The one thing that is not configured is HBR.
    Patrick

    Hi,
    What are you trying to achieve, provision a user for essbase studio ?
    EAS is a separate product from Studio.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Settings NOT saved for the iPod, because- not found

    I've a lot of regular changes to make when updating my music library on my iPod. But when I'm in the middle of doing so - that is using TAB "Music" (which "Sync Music" enabled) - and checking all relevant playlists, an error appears:
    "The settings were not saved for the iPod “<my iPod name>” because it could not be found."
    I don't know what to do because the only related articles all dates back to… 2007! That's 5 years ago!!!
    Of course I tried all the solutions of 2007, and when I do other errors occur like:
    "iPod sync failed" OR… my iPod simple disappears from the list (and even DEVICES doesn't shows up anymore in the left pane).
    THANKS for helping me.

    Can you post a link to the article you are referring to?
    I assume you have tried using a nother USB sync cable to help rule out the possibility of a faulty one?  What about plugging the iPod into a different USB port on your Mac?
    It might help to remove any other USB devices you have connected to the Mac. Then reboot the Mac as well as your iPod by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. Then try to resync.
    Could you provide the full text from the error messages you are referring to?
    Make sure you are running the latest version of iTunes (10.6.3).
    B-rock

  • ERROR: user is not configured for keystore 'service_ssl'

    hi experts:
    System environment:
    pi7.0  j2ee sp09
    ECC6.0 patch level11
    Here is my scenarios..
    ECC6.0-->(IDOC)XI(CIDX)--
    >External system.
    External system-->(CIDX)XI(IDOC)--
    >ECC6.0
    1.we have got there certificates from external system (rootCA.DER,intermedia.DER,Server.DER), imported the 3 certs files to TrustedCAs view using VA tool after we configured the SSL enable.
    2.We generated the CSR file and got the response from CA. we import the CSR response to SERVICE_SSL service
    3.I have assigned the role(keystoreadministrator) to user(PIAFUSER,PIAPPLUSER) in security provide service.
    4.I configured the IR and ID for the first sceniro. I Selected the "service_ssl" view and "TrustedCAs" view in received agreement in ID, and selected the "service_ssl" view in comunication channeland. actived all of them.
    issue :
    as soon I trigger the message to external. It is OK in monitor for processed XML Message.
    BUT I got the error message in runtime workbench/adapter engine/communication channel mornitoring.
    Channel Name: Buyer_Send_OrderChange
    Receiver Agreement: |com_sap_abap_r3_200|Sell_elemic|CIDX_E45_20_seller|OrderChange
    Security Settings > Current certificate configured for signing:
    ERROR: user is not configured for keystore 'service_ssl'
    Security Settings > Partner certificate configured for signing:
    ERROR: user is not configured for keystore 'TrustedCAs'
    Thanks!!.

    The question have been solved ..
    thanks!
                         xixi

  • ERROR OGG-01148 programming error, data type not supported for column

    I am getting following error when I put null in insert statement
    2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
    I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

    I am able to diagnose what is cuasing the problem
    unsigned flag was the culprit of this error
    I am able to insert null after removing unsigned flag.
    thank you very much for your kind support

  • ERROR: XIAFUSER user is not configured for keystore.....

    Hi all,
    When I am running the an adpater on XI that uses digital signatures that I have loaded into the TrustedCA's keystore view I get this error in my monitor.
    ERROR: XIAFUSER user is not configured for keystore TrustedCA's.
    How do I configure a user for a specific keystore?
    Kind Regards,
    Chris

    Hi
    You can find it from XI config doc here
    https://websmp106.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Also refer installation & post installation from here
    https://websmp106.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Cheers
    Jawahar Govindaraj
    PS:Reward pts

  • Item translations are not saved for copied page

    Hello,
    item translations are not saved for copied page. Is it expected?

    Hello,
    >> item translations are not saved for copied page. Is it expected?
    I’m not sure what you mean by not saved, but if you expect to copy a current translated page into a new page, and inherent the translation in the new page, the answer is NO, it’s not saved.
    Adding a new page to your application, even by copying an existing page, is a major change in your primary language application, which create multiple new independent elements in your application (after the page has been copied, there isn’t any link between it and the original page). You need to re-seed the primary application, export a new XLIFF file, and translate the new <trans-unit> that were added to it.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

  • Field not found for column exception

    Hi,
    I have a MBO using SAP RFC so i made changes on RFC added a newfield. Then i recreated MBO but im getting ":Field not found for column " Runtime exception. Anyone has faced some problem ?
    Thanks in Advance.

    Thanks guys!
    I wasn't able to restart the relay server, because I think I have insufficient rights, but I told the admin to do so.
    My MBOs contain new attributes and when I click on "Preview" to check the connection it works fetching the data. Anyway, I will not have to time to fix this issue now. I guess restarting the relay server makes most sense to me.

  • User prefs not saving

    Recently, preferences set by my users are not saving. Even if you set your prefs, shut the program down and re-start it, nothing is saved. Of course, if they log out and in again, its the same thing.
    All users are using LDAP to the server to login, and all user folder are mounted over the network. The only recent change was a system update yesterday, but I did this in hopes of solving the problem (It did not).
    Any ideas on what I can look at to try and resolve this issue?
    Thanks!

    Recently, preferences set by my users are not saving. Even if you set your prefs, shut the program down and re-start it, nothing is saved. Of course, if they log out and in again, its the same thing.
    All users are using LDAP to the server to login, and all user folder are mounted over the network. The only recent change was a system update yesterday, but I did this in hopes of solving the problem (It did not).
    Any ideas on what I can look at to try and resolve this issue?
    Thanks!

  • LiveLinkException [HR#10049]: User is not provisioned for this operation

    Hi,
    I installed EAL 11.1.1.4.000 on win2008 R2 64bit Japanese OS.
    But I met an issue after successful added Analytics Link Server node.
    When Adding bridge components to an Analytics Link Server, the error message said as:
    "Financial Management Server cannot be added: User is not provisioned for this operation"
    and the EAL.log shows:
    "LiveLinkException [HR#10049]: User is not provisioned for this operation"
    Does it means I did the wrong setting when configure EAL?
    Thanks

    Have you set up the correct provisioning for the user in Shared Services?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.

    I have standard edition Lync 2013 deployed. I have also enabled enterprise Voice for all my users.
    When I try to create a response group under group tab, I add the enterprise voice enabled users to the group and click on commit I get this warning:
    Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.
    This is clearly a glitch since the users are already enabled for enterprise voice. Has anyone come across this issue before?
    Thanks

    Have you tried restarting the Response Group service? Are you able to add any EV enabled users to this RGS?
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • Logged on user is not provisioned for this application

    I created(shared services) the one user in the ldap not in native directory, i given provision in such a application to user ...
    i try to login that user but the message was displayed " *Logged on user is not provisioned for this application*"
    Pls help me
    Thanks

    Hi
    have you given authority in the application groups for the different profiles for that specific user too?
    a common error is giving a user right on the application and omitting to give it in application groups in shared services.

  • Non admin user - changes not saved (Safari settings, system prefs, etc.)

    iMac, 2 users, one is administrator and other is standard user. Recently, in the non-admin user account, it has become impossible to make any changes. For example, adding an application to the the Dock, after logging out and back in next time, the application is not in the Dock any more. Also, making changes to the prefs in Safari, changes are not saved.
    I noticed this after installing FireFox v4. I installed it as admin whilst in the non-admin users account. However, I don't believe that the installation of FF has anything to do with the problem, it just highlighted it. I've checked the permissions for the various directories that hold prefs info such as user/libraries/application prefs/etc. etc. and also Safari prefs. Nothing I can see that has changed in system prefs.
    Any ideas on what has caused the problem (kids are known to fiddle from within the non-admin account) and any ideas on how to fix it?
    Thanks

    Hi PPRuNe,
    You could try making the standard user an Admin too. To do this, make sure you are logged in to the standard user, go to System Preferences > Accounts > Standard user (you may have to unlock the padlock) > Allow user to administer this computer
    This will allow changes to be made without being prompted for a password all the time.
    However, if you had Parental Controls on, they probably won't work on an admin account because as an admin you have complete control over a computer, so the computer thinks there is no point in having the controls turned on. And if the kids are known to "fiddle," just think carefully!
    Hope this helps you.
    Chris.

  • User Settings Not Saved

    Hello,
    I am using the VB .Net Autoupdater for my app, its working perfect however.
    Lets say I am using version 1.0.0.10, Initially when the app ran after I installed it I had to fill in a bunch of user settings via a form a created.
    I can close the app, re-open it and the user settings are saved, all is good. Now
    I need to make a change and now have version 1.0.0.11 I use the autoupdater and it pulls down the .exe file overwrites the existing .exe.
    Now when I launch the app again, the correct version is used however I have to re-enter my user settings again.
    How can I preserve my user settings without using a Click Once install?
    Thanks
    MW

    Sure,
    I'm always open to learn new ways of doing something.
    Thanks
    MW
    Ok, have a look at the code that I posted on a page of my website here.
    It's very specific to what you want saved and how it's to work, so that's what you'll see: It's very much customized to what he wanted.
    One important part is what you'll see early on:
    Private Shared _instance As Settings
    and this:
    Private Sub New()
    End Sub
    Those are private, so only that class can access it. The backing field (variable) is shared so that it's relevant to the class as a whole, not to any instance of it; that is -- there can only ever be one instance of it.
    The constructor is parameterless and PRIVATE, so that the consumer of that class can't create an instance; that's only done through the shared method meant to do it:
    Public Shared Sub GetInstance(ByRef instance As Settings)
    See what I mean?
    Still lost in code, just at a little higher level.

Maybe you are looking for