Personal Network Drives inaccessible

Since the upgrade to Mavericks our network users are now unable to access their Personal Home Drives
We have tried using the name of the server as well as the IP Address and neither are working for us.
This was working before the upgrade.. ANy advice
We get an errpr pop up after a little while of trying to connect that says:
There was a problem connecting to the server:
You do not have permission to access the server

Hi,
Yes network discovery is on, and I can access the NAS but not the Samba connected USB HDD on Win10. I did look for the Dell drivers, but I could see any that would cause this (I think!).
The following snips show My Dell, and my wife's HP with Win8.1 - she see LS-BA and RWBuffalo in Networks. I can connect the LS, but I need to do it manually every reboot, and although I can see RWBuffalo, it would connect at all.
I may have seen a blog entry related to this, saying that since 10041, security changes were made about accessing drives - this maybe a red herring though!
Regards

Similar Messages

Network Drives inaccessible

I have now updated to Version 10049, after a fresh install of 10041, since the update from 9926 didn't work.
I have found that this version and 10041 both have a problem with seeing the local network drives.   I can assign drive letters to the partitions on my NAS drive (Buffalo LS 2TB), but it does not appear in Networks.   I also use
an external HDD (Seagate 400GB) on the USB connection on the router and that connects with Samba.   All the other PC's (2x Win 8.1 and Win 7) on the network can see them but not my Windows 10.   I may have seen a similar post, but can't
find it now - so sorry if this is a repeat.
I thought that the drives may have been visible initially, but I loaded the latest Dell drivers for this PC, and they disappeared again.
I have no problems in the Device Mgnr
Any advise on how to reinstate these connection.
Thanks
Richard
Dell Inspiron 7347 i5 and 120b SSD - x64 version

Hi,
Yes network discovery is on, and I can access the NAS but not the Samba connected USB HDD on Win10. I did look for the Dell drivers, but I could see any that would cause this (I think!).
The following snips show My Dell, and my wife's HP with Win8.1 - she see LS-BA and RWBuffalo in Networks. I can connect the LS, but I need to do it manually every reboot, and although I can see RWBuffalo, it would connect at all.
I may have seen a blog entry related to this, saying that since 10041, security changes were made about accessing drives - this maybe a red herring though!
Regards

Workaround for slow Bridge when network drive is inaccessible?

Hello all,
Hoping someone has some information regarding an issue I'm having with my workflow and Bridge. I have CS6 installed and am using the 64bit version of Bridge for file management. I work from 2 locations at the moment and have a portable drive that I take with me from place to place with my work files on it. In one location I can plug the drive directly into my system via USB, but in the other location (for various reasons) I have to plug it in elsewhere and access the drive through a network. This all works fine and I have no issues with getting to my files in general. Where I do get an issue however is when I start trying to add shorcuts to the drive within the "Favorites" menu in bridge.
The short of it is that as long as I have a shortcut to the networked drive in the Favorites menu, Bridge will run EXTREMELY slow when I am at the work location where I am accessing the drive directly. It appears that Bridge is trying to look for the networked drive on all the networked computers at that workplace every time I try to access a file or even use the menu system within Bridge (to right click a file for properties for example). I can alleviate the issue by removing the networked drive from my favorites or disconnecting form the internet (that one is not a practical option however), at which time Bridge stops trying to constantly look for the drive eveywhere and returns to normal speed.
This isn't a horrible issue for me, it just creaates a lot of repeat work of having to navigate to the network every time I open bridge again at the location where I access the drive remotely, or having to constantly re-add the networked drive back into the favorites every time... then having to remove it again before use at the other location and so on. Is there a way to adjust or change Bridge's behavior to basically tell it that if the specific drive isn't available after the first attempt to ignore it from then on unless I specfically click on the favorites link? Or in lieu of that, is there a way to have alternate "profiles" within Bridge that have seperate favorites etc. so that I can switch back and forth depending on the location I am at?
Like I said, not a horrible issue, but I really like having the quick, easy access to the drive that the favorite menu provides and would love to have a work around if one is possible. I realize that this setup is not common and so I might just have to deal, but if there is a super user solution or something I can tweak in a config file somewhere I would love to know! Thanks for the input and advice in advance!

Thanks for taking the time to respond guys! Yeah, I didn't think there would be any easy answer to this one. I actually have never had any issues running Bridge with any network I've been on with the exception of the lag when the network drive isn't present. Or to be more specific, severe lag when the networked drive is stored in favorites and then is absent in a situation where there is another different network of computers present. Don't know if it will help anyone who is trying to connet to a network drive etc. but all I do to get Bridge to "see" the network drive is navigate to the desired network drive or folder in Windows Explorer and then drag the drive or folder icon over from the Windows Explorer browser into my favorites area in Bridge. It drops the network link right into the favorites menu complete with a special network icon for the link. That has proven to be the fastest way for me to get a correct and functional connection to a network drive stored in Bridge. I was doing this with Bridge CS5 as well and it has always worked great for me.
For my network drive situation specifcally, I actually link to the entire drive as It's used solely for my design work. It's uniquely named with a title specific to me and my business so it definitely wouldn't be sharing a common name with any other drives or folders on another system on the network. I save the link to the network drive in my favorites and then I only ever have to click that to get to the root directory of the drive and navigate to whatever I need. Works great and super fast at the location where I need to use the network drive. Maybe I don't have hiccups like some because my computer has a reserved IP for that network tied to the MAC address of my computer so it is always the same IP every time.
The functionality I would like is actually very close in Bridge, with the only issue being that it insists on searching other computers on the network after every process it does if the network drive isn't present. The location I work at that doesn't use the network drive setup has 5 computers linked up to their network and so I guess it's scouring each of those every time I do any single thing in Bridge, looking for the long lost network drive lol! I have to confess this is strange behavior and really seems like a bug (albeit maybe a minor one due to the unusual workflow method) to me and Bridge is the only software I have that does this type of behavior. I can't really think of a good reason why you would need Bridge to look for a drive or folder in a location other than the one you have specified in the favorite path for it. I mean what if you have 2 copies of the same folder in different locations for backup purposes? You wouldn't want Bridge taking the initiative on it's own and accessing your backup folder without telling you, especially if there are legacy versions of a file you wish to retain in the backup location.
If anyone ends up having a solution for this I would love to hear it! Otherwise I'll just have to hope that Adobe eventually buffs up the network functionality of Bridge down the road and in the meantime add and remove the favorites path all the time. I would think smooth network functionality would be increasingly needful and important however. I mean Adobe even offers a cloud service version of their software... That implies to me that they are aware that more and more work will be done "in the cloud" and over networked scenarios. I have my fingers crossed! Thanks again for the info guys!

MSI installer closes with error 1327, Invalid drive on Win 7 Ultimate when My Documents is moved to a network drive

I have several computers with Windows 7 Ultimate installed here at the Pioneer Library System. We have ~20 workstations running XP Pro on a Active Directory domain and are planning on rolling out Windows 7 this fall. I am running Windows 7 to test our programs
(have since RC1) but I am running into an issue when installing software.
The problem I am running into is that when I try to install any program that uses the MSI installer on Windows 7 , it fails with a 1327 error at the point where it is preparing to install and says "Invalid Drive H:\".
All the users in our domain have the "Home Folder" on their active directory profile set to
H:\ (which is mapped to \\PrimaryDC\user$ in the same place). We have also moved the
C:\Users\user\Documents folder to H:\ so as to keep all documents on the server where they get backed up regularly.
If I move "Documents" back to C:\Users\user\Documents the MSI installer works fine. When I look into the registry as suggested in
this thread I found that in "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders " and in "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell
Folders " the key "Personal" points to "H:\".
But, H:\ is a valid connected network drive. Installing from the same account on an XP computer with
C:\Documents and Settings\user\My Documents moved to the H:\ drive works fine.
I have tried setting up another 7 machine and get exactly the same results on it.
Is there a workaround for this besides creating a admin account that does not have Documents mapped to the network drive
H:\ to use for installing programs?
Thanks
Aaron Z
PLS

I do not have the option with some of these files to pass parameters to the MSI installer. For example, if I download the Acrobat Reader installer from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.exe and run AdbeRdr930_en_US.exe
it extracts the MSI file to C:\Users\USER\AppData\Local\Adobe\Reader 9.3\Setup Files and then runs it.
To reproduce this an a Windows 7 computer (does not have to be on a domain):
Prep Work:
Create a user (test1)
Create a folder on the root of C (C:\Test)
Set permissions on C:\Test to allow the test1 user to have full access to it
Share the C:\Test folder as test1 (again, set the permissions to allow the test1 user full access)
Set the "Home Folder" for the test1 user connect to Z: and point that to \\127.0.0.1\test1
Login as test1
Check that you have Z:\ mapped and that it works
Check that it works:
Install Acrobat Reader 9.3 from the link above
Note that it works
Uninstall Acrobat Reader 9.3 using "Programs and Features"
Break it:
Login as test1
Check that you have Z:\ mapped and that it works
Go to C:\Users\test1
Right click on the Documents folder and click on properties
Click on the Location tab
Click on "Browse" and select the Z drive
Allow Windows to move the files to the new location
Check that it is broken:
Check that you have access to the new Documents folder at Z:\
Install Acrobat Reader 9.3 from the link above
Note that it extracts itself to C:\Users\test1\AppData\Local\Adobe\Reader 9.3\Setup Files
and runs the MSI installer from there
Note that after the MSI installer is started it pops up an error saying Error: 1327, Invalid drive Z:\.
I also see this with various other install programs (VMWare vSphere Client, VMWare Player and Kaspersky Antivirus for example)
Is there any reason why this should not work? Is there something that I should be doing differently?
Thanks
Aaron Z

Finder Search brings no Result, when search network drives.

Hello,
I am a big time user of search (or spotlight) on my Macintosh and I have been using for years and through all the updates. I loved the recent updates to spotlight and I was able to search not only my HD but also the network drives where all of our files are located on an Mac Server.
I am the IT person of this small graphic design firm and everyone in our office work on files that are located on a Mac Server. We only keep the applications on our own client computers.
Spotlight or (search) was function perfectly up to a few weeks ago but recently when I need to search something on our Signage A, Signage B, Signage C or Print A, Print B or Print C, drives where we keep our files. The search does not bring no result. This is a problem not only with my computer but there are a few computers in the office with the same problem.
My question is what can I do to resolve this problem and be able to search again on my network drives where I keep all the files we are working on. If this function is no longer available with spotlight or search box of the finder window. Is there another software we can use to search for files and folders on our server.
Since there are a few people working on the same files sometimes when the files are moved it makes it difficult for the next person to find them, in that kind of situation search was working wonderfully and I need for that to work again.
Thanks,
Omar Noorzay

Search these forums for *search shares, search externals, search HDs*, and other variants. There have been numerous posts WRT the 10.5.6 update and problems such as you're reporting.

Error Downloading Music to Network Drive

I've moved my Music Library to a networked drive (NTFS) on a Windows XP system. The workstation that I'm running iTunes on is also Windows XP. Since then I cannot download purchased MUSIC (haven't tried videos yet). After initiating download via either starting up iTunes or using Check for Purchased Music Option, iTunes tries to do the download for each of the pending items After i's been thru all that are qued up, I get message that "There was an error downloading your purchased music. The disk could not be read or written to." I assume this applies to the networked drive which is accessible and readable with no problems (from/to any other program). Also, all INFO pointers in iTunes music listings confirm that songs are all stored on networked drive as intended and are accessible with no problem/errors. I also note that Preference Settings (Advanced) point to the appropriate Networked drive and folder (...\My Music\iTunes\iTunes Music) and that the "Keep iTunes Music Folder Organized" is checked. "Copy Files o iTunes Music folder when adding to library" isn't checked but behavior is same even if it is. Also, for what ever it maybe worth noting, attempts to Consolidate Library result in message "Copying Music Failed. The disk could not be read from or written to." I assume again that this is refers to the networked drive which, again, is accessible with no problems to any other programs to include iTunes itself which can access movies and/or songs from the networked drive, playing them wihout error even while these messages are being displayed during these other operations.
So, as it stands now, I have purchased music that I cannot download by any method that I try. The Apple Store recognizes that it is purchased and offers to download it whenever I start iTunes But I continue to receive the same error described above. In the iTunes Music Folder on the networked drive there is a folder, among the artist folders, named "Download" that contains pointers to the items that I've purchased but cannot download. I should also note that all of these attempts are being done with iTunes on the client workstation w/o the iPod being connected which I didn't think would matter. I've read most of what I can find about this error and can seem to find problem like mine(most others seem to be with video). Also, I'm sure that I followed correct procedure in moving my iTunes Library from local machine (where I was running out of space) to Networked drive. Local machine still contains the iTunes Music Library xml file, the iTunes Libary Database file, and an empty iTunes Music folder all in the appropriate (original) location of ...My Documents\My Music\iTunes folder.
I'd appreciate any suggestions as I've worked on this for several days and still cannot get to my purchased music.
Thanks in advance for advice / help.
HEC1152
Generic PC Windows XP Pro

Got a similar issue going on my network:
So far, two users have tried purchasing videos and music from the iTunes music store. Both got the failed download error and told to try again with the "Check for Purchased Music" command.
Both running Windows XP Pro bound to an Active Directory domain.
Both have the My Documents folder redirected to their personal directory on the network (\\server\users\username).
By default, iTunes stored its files in \\server\users\username\My Music\iTunes.
Since I don't want my users filling up my file server with MP3s, I first had the user move the iTunes Music folder to their local machine using iTunes Preferences (Advanced -> General). But after that change, the download error went away. ! The Library file and XML file are still stored in My Music\iTunes on the network.
I found your post while trying to figure out what's going on. Tried to reproduce the issue on a test machine by downloading the Free Download of the Week. But it downloads just fine. Nuts...
17 iMac G4 800 Mac OS X (10.4.4)

Network Drives / FCP Scratch Drive

Hi
This might be a networking question, but here goes.
I have FCP 5 runnning nicely over GB Enet to a drive cluster.
The workstation has an account shared by editors. The editor logs into the machine, then mounts a personal network share using smb and a private log in.
Here's the problem:
editor A comes in, opens FCP, logs into NetWork Share A and sets the Scratch Drives to Network Share A. They work, unmount their share and are done.
now editor B comes in. They log into NetWork Share B .... run FCP... but because FCP still has the Scratch Drives set to NetWork Share A the computer automatically runs 'Connect To Server' and attempts to log on to NetWork Share A. If Editor B fails to log in correctly to Share A (which Editor B always does) or cancels the log in, FCP quits. No reset Scratch Drive prompt (as with missing firewire volumes ... just quits.
Users can delete the FCP prefs to avoid this situation... but it's a pain. Probably a Bug really.
However does anyone know how to stop the automatic attempt to connect to the server?
Thanks
Lee

You can avoid this, I believe, by having separate user logins for each editor...
Patrick

How do use Time Machine to back up to my network drive?

I have been dealing with this issue for days. When I had bought my MacBook Pro a couple of weeks ago I figured Id try and back it up to my 1.5tb Western Digital HD that's plugged into the USB port on my router. I Have connected to it through finder and can access it fine however my main point in getting to it is to back up my MacBook with Time Machine over the air to the external HD. I have researched and tried many tricks such as running codes in finder to create a "sparsebundle" using the code " hdiutil create -size 100g -fs HFS+J -volname "Time Machine" COMPUTERNAME_XXXXXXXXXXXX.sparsebundle " in Terminal. I was able to succeed in creating one but my problem comes when I want to transfer it to the network drive. I use the code " rsync -aE COMPUTERNAME_XXXXXXXXXXXX.sparsebundle /Volumes/NETWORKDRIVE/ ". However I get error codes such as "file could not be transferred (23)" and "no file or directory (2)". Also before I did all of these steps I made sure to make network drives discoverable in Time Machine by running the code " defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1 " in Terminal. However without using the trick that I keep getting errors with Time Machine gets error message 45 when attempting to back up to the Network Drive straight after making the Drive discoverable. I know Apple niched Time Machine back ups on network drives after or toward the end of Leopard and thats why it is so hard to do it now but I was hoping someone can aid me in my never ending problem?

Hi Barney
What format is the drive on the router? It has to be HFS+ (Extended, journaled).
Sorry Barney, that's not correct in this context. The user must create an HFS+ sparse bundle and then upload it to the network drive. The network drive will be formatted as its formatted.
I also believe it has to be an Apple Airport Extreme router.
Again, that is not the case. I am successfully using Time Machine to an Iomega network drive for the last 12 months. No issues at all.
However, you are making your backup completely unreliable.
There may be an element of truth to this, however, I have used the "Star Wars" interface to recover individual files directly. If I should need to perform a larger recovery and for some reason I can't get the usual access through Apple software, I have established that I can directly access the sparse bundle on the drive and mount it on the computer. Once there, I can just copy files directly from it. The sparse bundle folder structure makes it easy to get the latest version of every file with a couple of mouse drags. This means that I will always be able to get access to my backups.
Apple nixed it because they couldn't get it to work reliably. I imagine they only support that sort of thing on their own Time Capsule because they can control the wireless transmission and error checking (and they sold TCs specifically for that purpose).
I don't know why Apple nixed it - I've had zero problems with this configuration and it is by far the most sensible way to use Time Machine. It seems completely pointless to have a portable MacBook and then have to physically connect a drive to it permanently for backup purposes.
I've only had personal experience with the Iomega drive - maybe it only works with a limited number of manufacturers?
Bob
Message was edited by: Bob Lang1

Finder is very slow, particularly when using network drive

I have a mid-2011 Macbook Air, OSX 10.9.4, and Finder is extremely slow, particularly when I am navigating my Time Capsule. First, a little history.
I have tried the fixes listed in these three threads:
(1) https://discussions.apple.com/thread/3358265?searchText=finder%20slow
(2) https://discussions.apple.com/thread/1324280?searchText=Finder%20is%20slow
(3) https://discussions.apple.com/thread/5495797?start=30&tstart=0
Second, my Time Capsule is new. I bought it to replace a WD MyBook that used to work really well, and then something changed. Unfortunately, I assumed that it was some problem on WD's side, so after a year or two of waiting to see if either WD or Apple issued an update to fix it, I assumed it was some kind of file system incompatibility (or other interoperability problem) that wasn't likely to go away, and just sprung for the Time Capsule. However, after getting all the files on the Time Capsule, the problem remains. So here's a rundown of what I experience:
When I navigate the directories on my Time Capsule, if I haven't been in a particular folder, it takes a very long time to load the contents. On average, it will be 30 seconds, but it is not uncommon for it to be over a minute. This can happen even if a folder is empty or has just a few files in it. In addition, adding a subfolder and trying to rename it takes a very long time. After renaming a new folder, it can then take another full minute or more for the folder to actually show the newly assigned name and bounce into line in alphabetical order.
Here are some other observations. First, my connection is very fast, as I'm directly connected to the Time Capsule (albeit via wireless). Second, there is clearly something extra going on in Finder that is contributing to this issue, because I navigated to different directories using Terminal and did an "ls" command, and as you would expect, the list fired out virtually instantaneously. Yet, right after that, if I clicked on that same folder with Finder, it would take a minute or more to display the same file names.
Could it be that the Finder is doing other things at the same time as it is giving me a list of what is in the directory? For example, could the Finder be loading ALL metadata for each of the files into some database or index being built on the fly every time I pop into a new folder, even if I'm not using a view mode where I am asking to see those other bits of metadata? If so, that might make sense as I generally am using the network drive to navigate directories of my photographs, and they have a lot more categories of metadata associated with them than do Word docs and PDFs (e.g., date of picture, time of picture, aperture, shutter speed, exposure, etc.). Or, perhaps is Finder trying to load previews of ALL of the files whenever a directory request is made, so that bouncing through the previews takes less time? I sort of doubt that, because even after a directory listing finally comes up, it seems to churn a bit on each photo before the preview comes up, which I take as an indication that it's creating each preview only after a request is made for that particular file. Either way, I will say that in old WinXP and even in the newer Windows 7, if you want to view files in a Detailed setting where you can see other metadata (called "Attributes"), it definitely prioritizes giving you a directory listing, and then continues filling in the various selected Attributes one-by-one after that. Thus, if you want to sort by the date a photograph was taken (as opposed to its modified or created date, which seem to be default attributes that load as quickly (or nearly as quickly) as the filename), or by the photo's dimensions, it might take a few minutes to load in those attributes for a folder of a couple thousand pictures. But, critically, if you are not planning on using those attributes, but rather, merely want to see how many files you have in that folder, or select them all and load them into a photo viewer, you won't have to wait for the file system to load the file attributes before you get a listing of the folder's contents. It seems to me like the Finder, however, might actually be forcing you to wait until it has loaded all of those attributes.
Does the foregoing sound like a plausible explanation of the problem to those out there with knowledge of how Finder actually works? And if so, does that bring to mind any potential settings that could be turned off or any other work-arounds (since those I've tried have not fixed the issue)?
If anyone has other ideas, I am all ears. I am pretty annoyed that I sunk time into switching over to a Time Capsule on the assumption that Apple couldn't have had a bug this bad, only to find out that I was wrong. The biggest irony is that my old WinXP computer used to rip through the folder structures with ease on the MyBook, but my fully updated Air is practically crippled by the same task.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

My external drives no longer appear in Finder, BUT they do appear in Disk Utility (and network drives appear also)

Hi folks, I hope someone can assist. I have a Mac Mini 2011 running 10.8.5. All has been well. Suddenly, when I plugged in an external flash drive (USB), nothing showed up in Finder. Things I have done:
Confirmed SideBar and other Finder preferences are set to show/reveal external, network, and internal HDs
Tried multiple flash drives and hard drives, using drives formated in GUID/OSXExtended as well as FAT and NTSF. None show up.
Confirmed that the Hidden flag in terminal is not set.
Note: I can see the drives in Disk Utility, but the partitions/volumes are gray and will not be mounted.
Note: Network drives and internal drives appear and work as expected
Note: My network Time Machine also appears and performs as expected.
The only suspect I can think of is a small, free app I installed this morning called Caffein (which manages the sleep mode).
Also, I loged out and switched to another user account on the same machine (that I use solely for the purpose of troubleshooting), and it was similarly affected.
Thanks in advance!
Dave

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
diskutil list | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

In need of an external home network drive, help please...

Hi,
I am in need of an external home network drive in either 1 or 2TB form.
It will be for an imac and macbook pro + ps3 to use.
I saw this Western Digital one but was not sure how good it is -
http://www.wdc.com/en/products/products.aspx?id=300
I would be using it to back up HD final cut pro files a lot as well.
Please help.
Cheers

Ralph Landry1 wrote:
Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
aye, indeed.
that's why i suggested the OP searches the forum for information on both drives
personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
JGG

Setting up an external hd as a network drive/ setting up a web/fileserver?

i would like to set up an external hd i have plugged into my imac g5 as a network drive that is accessable throughout my network by my windows based systems and my mac book pro... i would also like to be able to set up a web/file server on osx... i usta use abyss when i used windows for a web server what are some good apps to use for the webserver admin?

i would like to set up an external hd i have plugged
into my imac g5 as a network drive that is accessable
throughout my network by my windows based systems and
my mac book pro...
to do that you should try out
sharepoints
i would also like to be able to
set up a web/file server on osx... i usta use abyss
when i used windows for a web server what are some
good apps to use for the webserver admin?
To setup a webserver on your mac goto your System Preferences -> Sharing and turn on 'Personal WebSharing' Then drop your html files and other data in /Library/WebServer/Documents or /Users/yourname/Sites
Although I have not used it myself you may want to look at Web Control 1.0.7

Finder not showing connected network drives in Devices section

I have a number of network drives on my LAN, some NAS drives, some other Macs and of course a Time Machine. Prior to updating to OSX 10.9.5 when I used finder to connect to one of these shares the name of the connected share used to appear in the Finder Sidebar - under the devices section. Now when I do this nothing appears, although I do get an icon on the desktop and I can still access the remote files.
I have set/reset all the finder view settings from the Preferences panel and also tried deleting the finder and sidebar preferences files without improvement. I do have "Path Finder" installed as well and this still works as normal.
I contacted Apple support and after a hour or so they promised to get an engineer to get back to me sometime this week.
Has anyone else seen this behaviour ?
If Apple don't come up with any ideas I will have to experiment with uninstalling other apps which might indirectly case it, like Path Finder and even Paragon NTFS drivers.
It's not a show stopper, but a rather annoying inconvenience.
Thanks in advance for any replies
Dave

Hello birdy.....,
Sorry to take so long responding. Major disaster! My whole wall bookcase just tumbled, and I'm still working at excavating the family (of Macs).
Your card should work. I've used the Acard cards by the dozens without problem, though I've never used that particular 6860 card or set up a RAID ARRAY. Just checked, using a 6880 (RAID) though as a controller card and not as a RAID ARRAY, and found that my 2002 QS Mac would not see a standard hard drive(#2) running OSX (10.2) that had been formatted by the OSX install disk using the stock bus on the motherboard. It would, however, see a hard drive(#3) that had been formatted while connected to an ACARD controller card (6280). I'm guessing that an OSX installer disk is prepared to see and to deal with a SCSI drive, and that Disk Utility is not.
Check that.
Just removed the controller card formatted drive(#3) and re-installed the OSX(10.2) drive(#2); this time my 2002 QS saw it right away, both on the desktop and in disk utility. I guess it needed personal messenger service.
As I recall, I've seen that happen before using controller cards; as a result, I've always taken care to format a new hard drive by connecting it to a controller card if that is the way I intend to use it. Hard drives can be capricious, sometimes. At any rate, try formatting your hard drive(s) with an OSX installer disk (hoping you have one) while connected to the ACARD controller card - just click on erase (twice) and the drive formats automatically.
I'm a little mystified by reference to drivers; never installed any drivers, and always assumed none were needed.
Hope that helps. Check back and let me know.
Jon

I made my Ipod think it's a network drive - help!

I've played my personal iPod through iTunes on my work PC without any problems until recently.
Long story short, my Ipod now thinks it's the I network drive. I've confirmed that my songs and videos are still loaded on the iPod. I can't access the songs or videos on the iPod or through iTunes
When I connect it to my home computer and work computer the ipod loads, and is named as "I:\" in Itunes on both machines. In windows explorer on both machines it is (correctly) shown as an E drive and is named "David's Ipod".
So is there a way I can get the iPod to remember what it is - without wiping everything and starting over?
I have found some useful links to articles in this forum, have played about with network settings in Windows Explorer and reset the iPod twice.
All help and suggestions gratefully received.
Thanks.
Dell Windows XP

Sorry, I should have been clearer. The songs are still on the iPod. I can't get the iPod to play them either independently or connected to the computer through iTunes.
I can change the path when the iPod is connected
to the computer but iTunes still won't access the
songs.
iTunes won't access what songs?
I though you were having a problem with the iPod?
When I disconnect the iPod from the computer I
can't access the songs.
You can't access any songs with iTunes?
Or the songs on teh iPod are gone?
When iTunes loads the iPod, it correctly shows the the amount of space used / free space figure I know I have on my iPod. It doesn't list the song names etc. Instead of displaying "David's Ipod" (which is shown in Windows Explorer as an E Drive) iTunes it shows "I". I can't access any songs with iTunes.
When I examine my iPod through Windows Explorer I see all the data files listed.
When I disconnect the iPod there are no songs listed. It's as if it's got no data on it, but I know the data is still there from the file sizes listed on both Windows Explorer and iTunes.
Dell Windows XP

Looking for ideas regarding encrypting a network drive used by 2 OSX Macs

I was thinking of getting a networked HD (connected by Ethernet to my wireless router) to enable my two Macs (wife's tower running 10.3.9, my Powerbook running 10.5.8) to store each of our iPhotos, iMovies, iTunes, etc. libraries on one network drive (rather than on each Mac's HD.)
Since the Powerbook is so portable, and equipped with Airport, it would be the logical CPU to position next to our living room HDTV - using one Audio cable and one DVD-to-HDMI cable. Then, either user could log into their own account on the Powerbook and wirelessly access the networked HD to display their personal iPhoto, iMovie, etc. library contents over the TV.
But I wonder... if wife normally maintains her iPhoto library by logging into her G4 tower, maybe OSX's permissions will thwart her from accessing it when she logged into her account on the Powerbook because she would appear to be a different user.
I also wonder if It would also be wise...or even possible... to encrypt the networked drive, somehow, to add another level of security to the files, since anyone who managed to hack thru my Router might potentially be able to read all the files on the HD. The router companies lead us to believe WEP and other protocols are totally secure, but I've also read that these can be hacked by some individuals. This being a 1TB networked drive, I expect some other data might get backed up to it, too, making the security issue a bit more of a concern.
The security and encryption issues in this scenario are muddy to me....but it seems like this is could be a great way to securely consolidate both users' iPhotos and other media on one network drive, accessible from either computer with appropriate logins....or would there be some show-stopping 'gotcha'? What do you think?

instead of having to boot up both Macs, initiate file sharing, fumble to get things mounted, etc. each time ...
You can leave the desktop Mac to time out and go to sleep. and set "wake on Ethernet Administrator Access", which should allow you to wake it up and get files.
the Powerbook uses OSX 5.8 while the G4 tower is on Panther.
That does not present a problem or File Sharing, which can be made compatible across a wide \[but not infinite] range or Mac Operating Systems.
So they aren't using the same version of iPhoto...the G4 uses iPhoto6, and the Powerbook uses iPhoto 9.
Our household runs a mix of 10.4 and 10.5, having just upgraded the faster Macs to 10.5. We have our entire iPhoto library in iPhoto 8 \[iLife '08], which supports the range of Mac OS we are using, and many features including ordering prints (but not face-recognition). If you want to combine your libraries, perhaps you could drop back to iPhoto 8 and re-import the iPhoto9 stuff, and upgrade to iPhoto 8 on the G4/400. \[You CAN run 10.5.8 on a G4/400, but you have to use some hacks to install it, and it may be a little sluggish at times. Then you could simply upgrade to iPhoto 9 all around.
Encrypting an entire drive makes me really queasy. I have spent too many hours digging out after drive failures and software errors have clobbered a drive, and no matter how hard you work at recovery, at least a few files always get lost. When you encrypt an entire drive, the Operating System sees the whole drive as one big file -- and errors in that file may make that file (your entire drive) unrecoverable. A friend of mine had just such a disaster at home when a drive space enhancer called "Stacker" blew up on him.
If you put Quicken or other financial data on your home Server or shared drive, I would still not worry about it, but if it keeps you up at night, you could encrypt just the financial data file (and keep it backed up religiously).
Because I do support for schools, I have also implemented Mac OS X Server at home. With a school-like setup, ALL users files are on the Server, and any user can use any Mac, their files just "appear" when they log in. File Sharing underlies everything, but it is all done without thinking about it -- the Server just does it. But Server is a US$500 package (down from $1000) that requires a dedicated Mac and a lot of fiddling, so I do not recommend it for your situation.
One thing I do recommend, if you are going to store files on your network, is to try to upgrade/add an Ethernet Switch at Gigabit Ethernet speed, if possible. The Router does not need that speed, but Mac-to-Mac (if you go the File Sharing route) or Mac-to-Network_Drive (if you go that route) will be much more responsive. If your G4/400 does not have Gigabit Ethernet, you can get a PCI slot card for it. Or maybe upgrade it to a newer old Mac that can run 10.5.8 without hacks.
Message was edited by: Grant Bennet-Alder

Personal Network Drives inaccessible

Similar Messages

Maybe you are looking for