Phone not working properly

Iam using E 72. I have done the soft ware updation myself thru net. But still the phone is not working properly. While using the tutorilas, the graphics are coming but not the description.

Welcome to the forum!
You have not done anything wrong, certain firmware versions have this fault unfortunately.
Have a look at this thread:/t5/Eseries-and-Communicators/E72-Tutorial-text-missing/m-p/938745/highlight/true#M85401
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

After updating iso 6.1.3 in my 4s my phone is not working properly

After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot be sure it will work. Two ideas.
1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

HT4623 I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

I updated my phone last night now it is not working properly. Does anyone else have this problem? I have a 4S

Try a hard reset.....
Press and hold the Wake / Sleep button and the Home button at the same time, keep them both pressed until the Apple Logo appears.

I phone 3gs home button is not working properly

Hi Folks..
From the last few days my I phone 3GS is giving me a hard time.. Its HOME BUTTON is not working properly. Have to press it 2-3 times and have to press it hard to make it work. I am now running 5.1 iOS, it had the same problem with 5.0.1 iOS too. Can you suggest me what to do??? Do i need to take it to the service centre????

I've just noticed this too, after updating my 3GS to iOS 5.1. It seems to be happening off and on, but it is more of a problem when the phone has set locked and idle for a few minutes.
I usually wake it from sleep with the power button, unlock it, and wait for the ability to use the home button.
It might be worth it to take it to the Genius Bar or at least try to live chat with Apple Customer Service.
I feel your pain.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

My iphone 5 clock is not working properly. I've tried to reset it, and update the clock automatically and manually, and the time is still off. My alarms aren't working because of this, and I need my phone to work properly.

Automatic time is a function of your Wireless carrier. Your post indicates that your iPhone (5 or 5c) is running iOS 7.0.6. The current version is 7.1.1. You might try updating your device to the current iOS version.
HTH

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

Furthermore my keyboard does not turn sometimes as well

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

HT4623 Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Hi, After updating my phone to the iOS 7, it looks like its keypad is not working properly like It gets a little hanged. What would I do solve this?

Thanks
it really works.

Iphone 4 mic is not working properly

Hello,
Well my i droped my phone 4 and the back has been broken, well i replaced it with a new one, the result is that
My iphone camera was broken and i tried to replace it with a new one but the problem persist, and the mic is not working properly
That when i receive a phone call or when i call someone my iphone mic work sometimes and stop others and i discovered that by tapping on
The back of the iphone it work, and meanwhile i can use the mic for recording voice memos or for using viber or any software using the mic
And it works very good, only in phone calls it stop working and by tapping on the back it work again,
Anyone can help me???
Thanks guys

Thanks for the reply but yes it does record voice memo because there are 2 mics 1 on top and 1 on bottom.
the one that is using for making phone calls is the bottom one.Therefore top 1 is good but bottom is not.

WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

Dial UP Modem is not working properly in Satellite A200-1GB

My A200 - 1 GB's modem is not working properly. It tries to connect but at last it says remote computer is not responding. As i noticed It has a "Agree" 56kpbs modem.
It shown as Toshiba Software Modem.
I tried so many times it doesn't work properly. I tried by changing the assigned COM ports to several other COM ports like COM1,COM10,COM 4 ext... same thing occurs.
When I diagnose the modem via the modem properties no matters found.
Same as when I'm dialing through the modem to a telephone (i mean as a call) it's working properly. I mean it can call to a mobile phone or land phone.
But the same phone line is working properly with my desktop modem as same as another HP laptop modem.
It seems there is some malfunction on my 56k modem.
I tried even uninstalling and reinstalling but still the matter exists.
Can anybody help me in this case?

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=109510#109510
Seems you have started two threads about the same theme.

Phone not working properly

Similar Messages

Maybe you are looking for