Phonebooks disappeared from scheduling interface after upgrading to TMS 14.5

Upgraded to TMS 14.5 this morning and now finding, to my great dismay - that none of my phone books are available in the drop-down menu in the Add Participants pop-up window - see attached screenshots.
All phone books are otherwise showing up correctly on the end-points, so I know they are still there...
These are the phone books, which were all correctly listed in the drop-down menu in all other versions of TMS:
This is what I now get:
Anybody else having this issue? If I can't resolve it, then I've got no choice but to downgrade to 14.4 :( (Lucky it's a VM so it's only a matter of applying the last snapshot).
Edit: I've managed to create a work-around by connecting all the phone book sources to the "All Systems: phone book, which means the support staff will at least be able to find the entries as long as they have an idea of what to search for. Far from ideal though. :(
/jens
Please rate replies and mark question(s) as "answered" if applicable.

Don't know what that could be since I'm the one who "sets the settings" so to speak, and everything worked perfectly prior to the upgrade. Applied a stack of "important" server updates from Microsoft just before upgrading TMS, wonder if something went astray there, but why would that only affect the phone books - that doesn't really make sense either. And remember, I can see all the phone books everywhere else, it's just in that drop-down menu they're MIA.
Only explanation I think of would be that one of the services didn't start properly, didn't have time to do much troubleshooting unfortunately, and won't be able to try again until the semester is over in another 6 weeks.
/jens
Please rate replies and mark question(s) as "answered" if applicable.

Similar Messages

TS3161 iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx

iWeb 'disappeared' from my iMac after upgrading to OS X10.8 - any ideas? tkx

Did you do an erase and install of Mt Lion? In any case you'll have to reinstall iWeb from its original source. Did iWeb come with your computer? If so you should have a couple of disks that came with your Mac and one of them will have the Bundled Software Install package on it. Like one of these:
Be sure to update iWeb to the latest and last version, 3.0.4, from Apple Downloads web page.
OT

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

IMovie can't see my photos from iPhoto anymore after upgrade.

Can anyone help with allowing iMovie to see my photos I have imported previously from iphoto?
After upgrading to the new iMovie i have alot of photos in the project saying 'Missing file, try importing original source media.
They were once all there in a finished project but now are gone.
Any help is appreciated
Thanks

After I import my photos from my phone to iphoto, i always move my pictures to a folder i made in my documents
You realise that this is just wasting space, right?

Photoshop just disappeared from my mac after using adobe cleaner tool.

Photoshop just disappeared from my mac after using adobe cleaner tool. Can i somehow resurrect it to my mac?

The cleaner remover Photoshop and cleans up thing the might have been causing installation or updates problems so you have a clean slate. Now you install Photoshop it should install correctly and update now.

Lost you tube from home screen after upgrading to os6?

I've lost you tube from home screen after upgrading iPad software. Is this normal?

Sorry, no YouTube in IOS 6.
You can use the iPhone version of YouTube or Jasmine
http://itunes.apple.com/sg/app/youtube/id544007664?mt=8
https://itunes.apple.com/sg/app/jasmine-youtube-client/id554937050?mt=8

I'm seeing a high runt count on my serial interfaces after upgrading to 12.

I'm seeing a high runt count on my serial interfaces after upgrading to 12.2(37).
I was looking for information on what changed in 12.2(37)and some more detailed information on runts.
I know that runts are smaller than the medium's minimum packet size. But I want more specific information and I can not find meaningfull information.
Any Ideas

On a serial interface I would contribute the runts to a timing problem which is not an easy problem to isolate esp. with a telco. Even though there may be no CRC or Frame errors.

TS4118 Can I retrieve to do list from old calendar after upgrading to mountain lion?

Can I retrieve "to do list" from old calendar after upgrading to mountain lion?

Hello MacMystie,
Thank you for using Apple Support Communities.
If you have a recent backup with the old "to do list" you can use the following article will provide information on recovering information from a backup.
Recovering iCloud contacts, calendars, and bookmarks from an iTunes backup of an iOS device - Apple Support
Regards,
Jeff D.

How do I remove MobileMe from iPhone Mailboxes after upgrading to iCloud.

How do I remove MobileMe from iPhone Mailboxes after upgrading to iCloud. I now have both a MobileMe and iCloud mailbox in Mail in iOS5, but in Mail,Contacts, Calendars there is no MobileMe account to delete!

check this https://discussions.apple.com/message/16371039#16371039

I lost my stored contact from my iphone after upgrading ios 6

i lost my stored contact from my iphone after upgrading ios 6

I've had the same issue. I forgot how i resolved it but i think it has something to do with iCloud and sync in your contacts.

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

My Theme disappears from the DVD after I burn it on to a disc. I know it's there but my DVD player doesn't "see" it. How do I burn an iDVD that will play the theme?

It sure is. It also plays on my PC using VLC Player. So, I know that it was burned onto the DVD.

[Solved] Eye of Gnome awful (broken?) interface after upgrade

Just today I've upgraded from eog 3.14.3 to eog 3.16.1 and am incredibly disappointed in the new interface I'm seeing, to the point where I expect something isn't working as it should. (I've downgraded to 3.14 as a temporary solution).
Normally (3.14) I see this handy menu bar with buttons for options I use quite frequently, including rotate and zoom to 100%. http://i.imgur.com/mLBxPX3.png
However, after upgrading, I get this crappy minimal interface with only an expandable zoom slider (which is unlabeled) and ever-present buttons obstructing the image. I can find nothing in the settings relating to this bar. http://i.imgur.com/l01DRVE.png
Again in the newer version, the hoverable menu when in fullscreen mode does have all these original buttons, they're just not in the main windowed interface where I need them. http://i.imgur.com/xsnlUTW.png
This seems incredibly broken to me (I've always loved eog over all others for the interface), but I haven't been able to find any other complaints since the release of this new version. Is this a new "feature" or have I just managed to make it broken on only my computer?
Last edited by JeSuisNerd (2015-04-21 00:48:13)

Eye of MATE is absolutely perfect. I didn't use any plugins so I'm fine without them, and the interface and functionality seem to be identical to eog pre-update. Thanks very much!
Bevan, the icons were disappearing but the grey boxes under them were not. I'm not really worried about that anymore now anyway.

Macbook Pro will not boot from any source after upgrade

Hi,
I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on button in until it finally shuts down for good.
I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device - I just haven't figured out how to boot from this device as yet.
I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point. After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
Tony

Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
Tony

Disappear of application world after upgrade in Bold 9780

i have Balckberry Bold 9780 and 3 days Ago After upgrade App world i found the App Icon disappear although the program allreday installed.i tried many things like:
1- Pull the battery from Device and restart again.
2- try to find if icon is hide at each folder.
3-remove the app world and try to install it again.
4- try ro remove the app world and download older version but when i try this step always got the newest version.
5-i can't download any program now and i got a message" our apologize ,although your browser can acsess application world but u can't continue downlod.
Realy I got frustrated and i need your kind help
regards
[email protected]

mohamed85 wrote:
Thanks so much for ur help but can u give me direct link to download V 4.0.0.55
Cos when enter the link doesn't give me any choice just download the highest version only
Hi mohamed85
Welcome to BlackBerry Support Forums
The link provided above is the link to download App World ver.4.0.0.55. But if you are having problem then try it :
First On your Homescreen Go to Options > Device > Application Management > Locate BlackBerry App World , then highlight App world press the menu key > then delete.
After Deleting Do a battery pull Restart like this device POWERED ON remove the battery wait a min. then re-insert it back. After Reboot From your BlackBerry Browser Browse or click on this link http://mobileapps.blackberry.com/devicesoftware/entry.do?code=appworld3 to download version 4.0.0.55.
Please try it again ,i hope it will work.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Mail showing attached pictures from previous email after upgrade to Mavericks

My Apple Mail app is configured to show the email body in the bottom pane when I select an email in the email list in the top pane.
I receive emails on a scheduled basis from a security camera. The email contains attached pictures.
THE BUG: After upgrading to Mavericks, when I am in Mail and am going from one email to the other, the image does not refresh to the image from the newly selected email. It continues to display the images from the first email that was selected.
Is this a known issue. Has anyone else seen this?
Thanks,
Al.

https://discussions.apple.com/message/23512376#23512376
re index
search not working so well: Try this: Quit Mail > then > Move ~/Library/Mail/V2/MailData/Envelope Index to the desktop > Re-open mail and see if that fixed it
some are recommending above

Phonebooks disappeared from scheduling interface after upgrading to TMS 14.5

Similar Messages

Maybe you are looking for