Photo came out washed over in red. Help!
I recently got an Officejet 6500A Plus that I have on a wireless home network. I have printed all kinds of documents, including a newsletter I received that had photos in it, and everything came out pretty true to color.
Yesterday, I tried to print a photo I had uploaded from my digital camera. The photo is of 4 people in an indoor setting. The print came out completely washed over in red. You can just about make out the people in the photo. I tried 3 different times - and they all came out the same.
Please help!
Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
I edited photo came out in shades of red
I downloaded the new iPhoto update and then edited a B&W photo. When I went to share it on email it came up in shades of red. It was in proper shades of black in iPhoto. What happened? Sharing without editing came out in shades of black.
iPhoto cannot handle (and has never handled very well) images that have B&W profiles. it requires an sRGB or AdobeRGB profile, even for B&W images.
-
HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup -
My iphone 4s is no longer detecting wifi since the IOS8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!! I cannot afford to go over my data and I use wifi at home and work... I believe the updates have caused the issue, because it was working fine before the second update released (I hadn't put the first one one until I noticed it had stopped working, and by then the second IOS8 version had came out). They need to do a third update to fix this issue.
If it's grayed out:
Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service. -
I updated to an iphone5 and only a few of my photos came in from the photostream how ever all of the are still on my iPad?! How do I get the rest of the photos over to my iphone5?!
First of all, photo stream only saves up to 1000 photos and up to 30 days before they are deleted. The only thing you can do at this point is to sync the photos from the ipad to a computer and then sync to the iphone 5.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083
This should help... sync photos to a device...
http://support.apple.com/kb/HT4236 -
Why do my photos in "photos" look so washed out compared to iPhoto?
I don't like "PHOTOS," and I don't know why Apple came out with it for OS10. My pictures look washed out compared to how they look in iPhoto I can't just click on a photo and see it in full screen. What am I missing?
I took them with various cameras. But that isn't important. I'm comparing how the same photos look in Photos and how they look in iPhoto. They look better in iPhoto.
-
Aperture isn't importing videos from iPhone, only photos. I've tried plugged in and over wifi. Help?
How did you transfer the photos from your other iPhone? If you did it by importing them from the old phone to a computer and then used iTunes to sync them back to the new phone, then you would delete them by syncing again using iTunes but this time change the selection of which photos are to be synced. Each time you sync using iTunes, it sets the non-Camera Roll photos on the phone to match the current settings/selection in iTunes.
-
A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
PS. the apple ID I'm using on the discussons is not the hacked one.Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.
-
When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!
Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/ -
C4400 only prints 1/3 of a photo on 4 X 6 photo paper. Filled out printer setup perfectly! Help!
Fritzk,
Some other useful info would be connection method to the printer and the application we are printing from, as well as if other printing (docs etc) work or not. But in the mean time lets also go through some of the basics together. Lets make sure the printer is set properly for photos using printing preferences:
-Click the start button and then select devices and printers.
-Right click your printer and select printing preferences.
-In the new window that appears on the left you will see printing shortcuts. There will be one marked as photo or some variation - select that. To the right ensure that the size is set to 4x6.
-Click ok to close the window and save the changes.
Try the print again. If it does not resolve anything lets move on to making sure we have no software tripping us up. Try downloading and running the print and scan doctor located here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en - It can fix a lot on its own and if not give us a better idea of what is going on. Let us know the results.
If all the software components check out use this article as it handles partial prints under unique circumstances: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under windows a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I just got a MacBook Pro and when I was setting up I got this voice over thing to help me out...I now can't get rid of it and it is driving me crazy...can anyone help?
System Preferences > Universal Access. Turn off Voice Over in the "Seeing" tab:
-
how to trobleshoot an ipod touch. yesterday i tried to reset the setting then after i click reset it suddenly shut and after a few minutes an apple logo came out. It cannot be open anymore until now and the logo is still their. what will i do.please help me thank u
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
pls help my iphone 4 was on activation "required". i jailbroke it then it worked but some of the applications were crashing down,won't open. i tried a lot of tutorials and then error message 3194 came out. stucked in recovery mode,and then i use snowbreeze and then it worked!!!! but another problem came, i turned off my iphone then i switched it on again then it stucked in apple logo,.after doing some thing again 1604, 1600 bla bla bla came out..pls help me fix my iphone.
no help for jailbroken phones here-it's not allowed. good luck.
Maybe you are looking for
-
Interest calculation on vendor open items
Dear Freinds, I am trying to calculate Interest on open vendor items. t code F.4B Sys. is given below message, pl advise, i am stuck up.Config has been done , but still the problem remains <u><b>No list generated Message no. 02005 Diagnosis You may h
-
How to print on a non supported AirPrint printer
We have a wireless HP 6300 inkjet printer.
-
MacBook Pro running VERY slow. What should I do? Here is my Etrecheck.
Problem description: Computer running unusually slow. EtreCheck version: 2.1.8 (121) Report generated March 22, 2015 at 6:22:56 PM EDT Download EtreCheck from http://etresoft.com/etrecheck Click the [Click for support] links for help with non-Apple p
-
Java serialization is slow in Solaris 10
Hi, I'm think to migrate from Linux to Solaris 10, because of the better support for Java any many other things, but in the first test the java web application, we get a too slower response in Solaris, with a time of 03 minutes and 12 seconds for one
-
J2ME TextField Password runtime execution
I successfully compile my midlet using the J2ME polish tool. Whenever I tried running or debugging from the Eclipse IDE, when I capture the textfield.getstring I get all string in pure text, however, whenever I use an emulator the password field usua