Photo restoration service website, need a way for customer to upload photos to my site.
I have a digital photo restoration service in need of a website. Is there a webiste plugin that will allow customer to upload photo to my website for quote? Go Daddy, and Wordpress/MintThemes said it isn't something they support with their themes. Other photo restoration website have the upload option. Please advise.
Can you drag it to the Desktop?
Similar Messages
-
Using RFBIDE00 for customer master upload
Hi all,
Does any one used batch input program RFBIDE00 for Customer master Upload data in to SAP.
Could you please explain how to use it... its urgent, appreciare if your early reply..
I am planing to use it through Run the program from SE38..
Thanks..hi good sap1,
Batch Input - Customer Master Data (RFBIDE00)
Description
All new fields for customer master records can be transferred to the R/3 System also with the report RFBIDE00.
Furthermore, the batch input can be carried out with the existing record definitions. By means of the end of record marker, the report recognizes which record structures do not yet correspond to the extended record layout and initializes the new fields with NODATA.
It is pointed out in the batch log, which structures are yet to be maintained. This should be done as soon as possible to be able to use the new functions or fields
Introduction
It is now possible to pass the information concerning tax categories and withholding types (for the extended withholding functionality) and the special Argentine fields via the standard batch-input program. Please look at the standard documentation if you need further information on the program.
Additional Fields
The additional fields have been added to the structures BKNA1 (general information) and BKNB1 (company code data). Please use transaction SE12 to see the fields of the structures.
Enrichments for Tax Categories
The following table shows how to fill the interface table BKNAT to pass the tax category data:
Field
Description
Value
Input
STYPE
Record type
2
obligatory
TBNAM
Table name
KNAT
obligatory
XDELE
Flag: Delete entry
optional
TAXGR
Tax category
obligatory
Enrichments for Extended Withholding Data
The following description shows how to fill the interface table BKNBW to pass the tax category data:
Field
Description
Value
Input
STYPE
Record type
2
obligatory
TBNAM
Table name
KNBW
obligatory
XDELE
Flag: Delete entry
optional
WITHT
Withholding type
obligatory
thanks
karthik
reward me points if usefull -
Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR
Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
PBUKR like prps-PBUKR,
IZWEK like prps-IZWEK,
USR10 like prps-USR10,
USR00 like prps-USR00,
USR02 like prps-USR02,
OBJNR like prps-OBJNR,
end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
posnr like prte-posnr,
PSTRT like prte-PSTRT,
PENDE like prte-PENDE,
ESTRT like prte-ESTRT,
EENDE like prte-EENDE,
ISTRT like prte-ISTRT,
IENDE like prte-IENDE,
end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
PSPNR like proj-pspnr,
PLFAZ like proj-plfaz,
PLSEZ like proj-plsez,
end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
into corresponding fields of table it_wbs_prps
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
select pspnr posid
into corresponding fields of table it_wbs_prps1
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
if it_wbs_prps1[] is not initial.
select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
into corresponding fields of table it_wbs_prte
from prte
for all entries in it_wbs_prps1
where posnr = it_wbs_prps1-pspnr.
sort it_wbs_prte by posnr.
endif.
Get data from PROJ Project Master Data
if it_wbs_prps1[] is not initial.
select pspnr PLFAZ PLSEZ
into corresponding fields of table it_wbs_proj
from proj
for all entries in it_wbs_prps
where pspnr = it_wbs_proj-pspnr.
sort it_wbs_proj by pspnr.
endif.
loop at i_t_data.
clear: wa_prps1, wa_prte, wa_proj.
read table it_wbs_prps into wa_prps with key
posid = i_t_data-posid binary search.
read table it_wbs_prte into wa_prte with key
posnr = wa_prps1-pspnr.
read table it_wbs_proj into wa_proj with key
pspnr = it_wbs_proj-pspnr.
i_t_data-zzPBUKR = wa_prps-pbukr.
i_t_data-zzIZWEK = wa_prps-IZWEK.
i_t_data-zzUSR10 = wa_prps-USR10.
i_t_data-zzUSR00 = wa_prps-USR00.
i_t_data-zzUSR02 = wa_prps-USR02.
i_t_data-zzPSTRT = wa_prte-PSTRT.
i_t_data-zzPENDE = wa_prte-PENDE.
i_t_data-zzESTRT = wa_prte-ESTRT.
i_t_data-zzEENDE = wa_prte-EENDE.
i_t_data-zzISTRT = wa_prte-ISTRT.
i_t_data-zzIENDE = wa_prte-IENDE.
i_t_data-zzPLFAZ = wa_proj-PLFAZ.
i_t_data-zzPLSEZ = wa_proj-PLSEZ.
modify i_t_data.
endloop.
endif.
endform. " 0wbs_elemt_attrHi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example, it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM -
Need F4 Help for custom container element based on partner type
Hi Friends
I am displaying customer details in custom container .In that custom container I have a field Partner number,Partner type etc etc..
I included F4 help for partner number field, In that I referenced the following field.Now its coming perfectly.
wa_cat1-f4availabl = 'X'.
wa_cat1-ref_table = 'KNA1'.
wa_cat1-ref_field = 'KUNNR'.
But as per my requirement, customer wants to get the different F4 help when the partner type eq "Contact Person".
Rest of the partner type(Ship to party, Sold to party,Reseller, End user) should show the above one.
So I dont know, where I have to change, because in the field catelod level there is no option to control particular type in the column.
Kindly help me on this.
Thanks
GowrishankarHi Jose
Thanks for your Input.I created Event Receiver than Defined and implemented a method to get F4 help for customer number and email id field.Already F4 help is available for Email ID.Now I want to Include the F4 help for partner number field, it will call the search help based on partner type.I can able to get the partner number field search help, but F4 help is not working for email id.
I am not sure some whee its over writing some values or I am not sure.If I comment partner number F4 help class, I can able to get the F4 help for email address.
Plz guide to me to fix the same.
Thanks
Gowrishankar -
Query for customer and its all the underlying sites in AR
Hi Expert,
Please help me to build a query for a customer and its all the underlying sites .
ThanksPlease check this thread:
Running Total in QLD
Thanks,
Gordon -
I need a number for customer service! Please HELP.
I bought photoshop elements from best buy. I put in the code to retreive serial number. Message to contact customer service, I've been all over this website and can not find a number to contact them. HELP.!!!!
The iTunes Store does not have phone support. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards. -
HT204088 i need a number for customer service
is there a customer service number for apple? i have charges on my account that should not be there
The iTunes Store does not have phone support. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards. -
We have SQL Replication that goes occurs over a WAN and, often, it fails to replicate successfully. But, on the next replication attempt, is usually will succeed.
Is there a way to only have the alert, including the notification for it, occur if one or two consecutive attempts fail?Hi,
Take a look at the following sites:
http://blogs.catapultsystems.com/cfuller/archive/2010/11/10/enabling-sql-replication-monitoring-%E2%80%93-what-to-expect-in-the-replication-views-in-opsmgr.aspx
http://blogs.msdn.com/b/repltalk/archive/2010/05/09/all-about-automatically-monitoring-replication-agent-failures.aspx
Hope it helps:
Greetings
Roel Knippen
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Do I need FC Pro for custom frame sizes?
I recently purchased Final Cut Express HD for editing computer based software training videos. These videos are captured using Snapz Pro X2 at 1024x768 and will be played back on a computer at the same size, or reduced to 800x600. They won't be output to tape or DVD.
I thought FCE HD would allow me to edit at 1024x768 resolution but I now it seems that isn't possible.
Am I correct that FCE HD won't let me edit at the frame sizes I specified? Do I need Final Cut Pro 5?
Thanks,
Mythago
Mac Mini (PowerPC 1.25) Mac OS X (10.4.5) 1 GB RAM, 250GB Firewire ExternalFCEHD will let you use QuickTime videos of different frame sizes, but it will only output in 720x480 (NTSC) or... whatever the PAL rez is.
Keep in mind that your maximum resolution for DVD output is (essentially) 640x480 anyway, in square pixels. So, even if you were to edit in 1024x768, you will need to downsample it in order to get it on DVD.
On other training videos, I've often seen them show the full screen for some parts, but then zoom in on the areas where they're doing action. That would definitely be possible in FCEHD. For the full screen shots, scale the computer screen image to fit in the frame. Then, when you need to show detail, cut the clip and scale it up to make it bigger, and center the action in the video frame.
Look at some training DVD's by places like Digital Tree or someplace like that to get some ideas on how to do that. Hope that makes sense. -
Need some information for jar files upload in Oracle
Hi,
I am developing some java stored procedures which requires uploading about 10-15 jar files or may be more, to the oracle database. One way is to use loadjava and oracle stores classes in those jar files as separate java classes. Is there a way that I can put these jar files somewhere in the file systems, configure some oracle parameter, restart the database and still I am able to use them from my java stored procedures. This will be some kind of a dropin folder for jars. Any information on this will be helpfule.
ThanksThe forum on the JVM in Oracle at Java in the Oracle Database might be a better one to answer your question.
Melli -
Need an alert for Customer Ref. No on Sales order.
Dear All,
I have a question concerning Customer Ref. No. tab in the Sales Order. We use this tab to enter the customers PO number. if I create and save a Sales Order with a PO number, is there a way to ALERT me when I try to make a new Sales Order using the identical PO number as previously saved.
e.g. I have a SO#1 Customer Ref. No is #10. Then I have a SO#5 Customer Ref. No. is #10 too. When I type in #10, is there anyway to pop-up me an ALERT to let me know I have #10 for SO#1 already?
Thanks.
YukaHi Yuka,
Check below code in SP_Tran
If @object_type = '22'
begin
Declare @refcli as nvarchar(2)
Select @refcli =
(SELECT top 1 T0.NumAtCard
FROM OPOR T0
where T0.docentry = @list_of_cols_val_tab_del
order by NumAtCard
from OPOR where docentry = @list_of_cols_val_tab_del
if @refcli='' or @refcli is null Or @refcli=@refcli
begin
set @error = 1
set @error_message = 'No vendor References !!! Or vendor References is Already exists!!!'
end
end
Hope this will helps you.
Thanks,
Sachin -
Help needed: Search function for custom Repository Manager
Hi there,
i'm writing my own Repository Manager for EP 6.0 SP2 PL4.
I've serious problems getting the search function running. I'm using the 'new', Netweaver-based API.
I think, there are some general questions to answer:
- My Repository Manager exposes lots of custom
properties to the system. I create the properties
for example using following code:
IProperty newProp = new StringSingleValueProperty(
PropertyName.getPropertyName(
"{}" + myAttName),
myAttVal, PropertyFlags.constructFlags(
true, false, true, false)
Is there any convention for the propertie's name?
I think it has to be written in lowercase only?
Can I use ANY namespace I want instead of the
empty default namespace? (For example:
- After indexing my resources (of course, containing my
custom properties), the TREX-Monitoring screen for my
index shows all my custom properties in the 'Document
Properties' area, but all uppercase chars are escaped
somewhat. Is this OK?
- Trying to use the index above to search for particular
resources in my repository by my custom properties
fails all the time ('no docs found...'); searching for
any system property works fine. What's the reason?
- How can I force the (Property-) search uses my
custom namespace-manager's methods
isQueryPropertyNameUnderstood() and
getQueryBuilder()
to perform a 'pure' property search by the repository
manager? It seems that the TREX always handles the
queries by itself, because my methods are never called.
Thanx for you help,
DanielI created a new manager and copied the classes exactly from the "simple" example and I see similar behavior. Actually, when I do this, folders are recursively copied, but not files. Again, browsing and viewing of files work fine. Again, I am not seeing any unexpected exceptions.
The only thing that changed were the names and namespaces. Nothing else at all was changed.
This makes me think I am missing some configuration somewhere or there is something special about the example project that the wizards are not creating. The only difference I see in the project file is an additional nature (com.tssap.selena.cmf.PatternNature), but I am not sure that is relevant.
Wow, I am really stumped.
-Alex -
Keep getting an Error Message that I need Plug ins for InDesign to upload pictures
I am trying to create a brchure in InDesign and every time I try to upload a picture I get an error message that
states I need plug ins, but I know know what plug ins are missing or where to find them. Please advise. ThanksWhat is the exact error message, and exactly what are you doing when it appears?
-
NEED SOME SUGGESTIONS FOR CUSTOM KERNELS
I had a sony ericsson live with walkman earlier and I've flashed custom kernel and rom for it.. and it is working superbly so far.. Currently I've got an Xperia ray and I wish to do the same ... Before I get started let me know the best custom kernels out there for this device???
Solved!
Go to Solution.I guess you should search for XDA
As far as i know kernels from team free xperia(Free xperia Project) are the best
DooMkernel etc etc
http://forum.xda-developers.com/showthread.php?t=1520654
Check his signature
http://forum.xda-developers.com/member.php?u=2784807
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation. -
SCCM 2012 Reporting Services Website
Can someone point me to a how-to for configuring the Reporting Services website? The URL for our 2007 server is http://<server name>/SMSReporting_<site code>, but I can't figure out how to access the reporting website for SCCM 2012.
By default http://servername/reports
Justin Chalfant | http://patchmypc.net | Please remember to mark as helpful/answer if this helped you
Maybe you are looking for
-
Windows Vista Crashes when I puge in Ipod
My window vista system crashes when I plug in my Ipod.I have vista since it came out and had no problem until a few days ago. Have not install anything on the computer. When I plug my ipod in it starts to sync for a few minutes then I get a blue scre
-
https://www.cardmemberservices.net/welcome.php
-
Archiving documents having open item managed accounts
Hi All, We have a requirment to archive accounting documents older than 2 years. I would like to know if it is possible to archive those accounting documents which have postings on open item managed accounts. Example: If I have an accounting document
-
Ora_hash - Same hash value for different inputs (Urgent)
Hi, Trying to use ora_hash to join between tables but i noticed that in some cases, when working on different input value the ora_hash function generates same results. select ora_hash('oomeroe03|6NU3|LS006P|7884|1|17-JUL-13 13.18.22.528000|0005043|')
-
Movie streaming yields black picture w/sound
Movies seem to load fine from my library, but don't stream properly. The screen is black, no image coming through though the sound plays fine. Ideas anyone?