Photo slideshow issue

Can someone please tell me how I change the automatic settings set by iMovie '09. I have created a slideshow of photos in iMovie and cannot get the entire, full picture to screen. iMovie only allows a section of the photo to been seen and then slides across the picture. I just want the full photo to flash up and then disappear to allow the next one on. Thank you for your help!

You can change on an individual photo by opening the inspector, clicking the Rotate, Crop, Ken Burns tab and choosing FIT or CROP.
You can change this for all future photos you add to a project by changing the FILE/Project Properties. (Must do this for each project.) Choose FIT or CROP, not Ken Burns for Initial Photo Placement.
You would typically change this at the start of a project.
FIT will give you the whole photo and add a letterbox (or black border) to make it match the aspect ratio of your project. CROP will cut off the top and bottom or sides as necessary to make the photo fill the full screen without any black borders.

Similar Messages

How to display a photo slideshow in Widescreen 16x9 format?

I just bought a 5g iPod and the A/V connection kit. I can play a photo slideshow on my 16x9 TV, but it stretches the photos to fit the screen, so they are out of proper aspect ratio. Is there a way to tell my iPod that it should be displaying the photos on a 16x9 screen?
I understand that there is a widescreen option in the Video playback menu, but this does not seem to have any effect on the output of photo slideshows.

Jon,
See if this works. It may or may not.
Go to videos-->video settings-->Widescreen-->On
See if now when you play the photo slideshow it works right.
Now, if it doesn't then I don't think there is much you can do.
Tell Apple about the issue (if the steps above don't solve it)
Send Apple Your Feedback
btabz

How do I making a photo slideshow then subsequently buring to DVD?

I have just purchased PSE Premier 12 thinking I could make a photo slideshow then burn it to DVD. However it appears that I can only make a video/movie type presentation which results in terribel graphics (blurs what are actually very sharp photos) and will not allow me to specify the transition time between photos. Would appreciate some help here or have I got the wrong product? thanks.
Toucan

finno2010
Title Issue apparently in Quick Workspace
Let us assume that you have 4 photos that are already in the Quick Filmstrip scene spaces 1, 2, 3, and 4 and that you want a title page before photo 1 in scene space 1
Text Menu/New Text/Default Text
Create your title in the Titler, note that the title is automatically placed in the text bar as a purple bar.
With the mouse cursor, left click and drag the purple bar down and to the left of the first photo in the first scene space of the Filmstrip. Drag the title there until you see a vertical green line to the left of the first photo in the first scene space of the Filmstrip.
Then release the mouse click to view your title page at the beginning of the Filmstrip line up.
Note I have demo'd this with version 11, same for version 12.
So that you will have a project adaptable to higher resolution end products at a future time, I am suggesting the following
Premiere Elements 12 Project Preset Set Manually
File Menu/New/Project
NTSC
DSLR
1080p
DSLR 1080p30 @ 29.97
before you exit the new project dialog, please a check mark next to "Force Selected Project Setting on This Project".
Back in the Premiere Elements 12 workspace, Edit Menu/Preferences/General
Set Video Transition Duration 90 frames (equivalent to 3 seconds in your 30 fps system)
Set Still Image Duration 300 frames (equivalent to 10 seconds in your 30 fps system)
Then import your photos (1920 x 1080 16:9) into the project, using Add Media/Files and Folders
Since you are in the Quick workspace which does not have Project Assets (files go directly to Filmstrip), I suggest that you order your sized photo in a folder and then import the folder into the project with Add Media/Files and Folders.
As for transitions (all the same), select all the photos, go to Timeline Menu/Apply Default Transitions. The duration of each will be as per the preference setting beforehand. These transition duration can be adjusted by double clicking the transition at the Filmstrip level, and making the adjustment in Transition Adjustments dialog pop up.
Please review the details for the IrfanView and Microsoft Office Picture Manager for cropping/resizing. Explore and experiment on a mini test scale before the grand project.
Looking forward to your results.
Thanks.
ATR

Photo slideshows for iDVD - iPhoto or iMovie?

I posted before because I encountered errors when I created a DVD that incorporated photo slideshows and movies. The slideshows were created in iDVD and the movies in iMovie. The dvd was full, and on the one occasion that the burn was "successful", the photos for the menus were randomly re-arranged (and the audio for one movie was assigned to the wrong video). On other occasions, I encountered the dreaded multiplexing error (format error after 5 1/2 hours of encoding). I understand from some of your comments that my DVD is too packed (14 menus and submenus, 9 slideshows, 15 short movies) to encode properly. So I am starting all over and will try to simplify it this time. My question is: which application is best to make slideshows - iPhoto or iMovie? Is one application more stable than the other and less likely to encounter encoding issues? These photos and videos are from a 10 day family trip and I can't really eliminate anything but bells and whistles. Any advice is appreciated - I am grateful that there are so many experienced users willing to help novices like me.

My question is: which application is best to make slideshows - iPhoto or iMovie?
From what I read in the Apple Discussions and my own observations, it seems that both iMovie and IDVD, along with iPhoto, have their strengths and weaknesses. This is what I have found so far:
The default Ken Burns effect in iPhoto is much more pleasing than the one in iMovie. In iPhoto, the zoom and pan are varied; in iMovie, the effect is simply a zoom in. The iMovie Ken Burns effect can become very tedious when applied to a large number of photos. To vary the effect manually can also be a very time-consuming.
iMovie has the advantage providing a means to add text to the photos with a variety of special effects. I haven't found this option in iDVD. With iMovie it is possible to edit music. I have read a few posts that stated the iDVD will produce a better quality image when imported directly from iPhoto as opposed to one created by iMovie.
For more advice and info, check out: http://discussions.apple.com/thread.jspa?threadID=1326098&tstart=0
I hope this helps.

Photos slideshow pause/play button not displaying in 3.0

I've been running 3.0 on my first generation Touch for several months. Throughout, I've noticed that the Photos slideshow lower-center pause/play button no longer displays once I've paused a slideshow. While the left/right arrows show and I am able to advance photos one at a time, I am unable to re-engage the slideshow.
In software versions 1 and 2, one could freely pause and play a running slideshow. Now, when I pause the slideshow, I'm forced to bail out of the slideshow and start a new one.
A longtime Touch owner, I'm not certain if my problem is a 3.0 software glitch or things have changed. Has anyone else encountered the issue?

Hi,
look here: http://discussions.apple.com/message.jspa?messageID=9843694#9843694
I hope Apple will fix this and some other Bugs in their 3.0.1 Update which will hopefully appears in a few days.

IPOD 30GB photo slideshow

Hello. I've read much of the forum but 1st issue is the photo slideshow on my IPOD 30 GB. Downloaded pictures used to display full screen and scroll automatically. Perfect! Now the slideshow displays three tiny photos while scrolling. Have altered the settings to no avail. Am I missing something so simple?

Hi almost, ;^)
I also bought my 30GB in March. I haven't had the problems you've seen though. Have you updated to the newest Updater, the one from this month (Sep)? I have read several people saying that they've had all kinds of problems when using this version. I believe this Updater is really only for the Nano. If you kept the previous one (from this summer) that has the 1.2 iPod version, try putting that one back on it.
As far as getting the computer to see it, try this:
1) disconnect your iPod and Reset it,
2) reboot your PC,
3) don't start any programs other than iTunes,
4) don't plug in anything other than your iPod.
Be patient - wait a few minutes and see if it connects. If not, try plugging the iPod into a different USB port.
-dave

Premiere Elements 4.0 shuts down 15 minutes into my photo slideshow

I have created a photo slideshow in Premiere Elements 4.0. I'm using a Gateway Laptop - 2.00 GB, 32-Bit operating system. I checked available space on my C-hard drive and it shows: 43.6 GB of available space.
At approximately 15 minutes and 44 seconds, the end of one of my songs starts to skip, and an error message pops up that says: Microsoft Windows: Adobe Premiere Elements has stopped working - a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I checked the song where the issue occured. It plays fine in other applications. I checked the format of the photos - all are Jpeg. I even deleted all files from that 15 min 44 sec point in my project and it still hits something it doesn't like and shuts down with the error message. I defragged and performed a disc cleanup. I re-started the computer and tried it again - same issue.
So I started over. I checked it every time I added something new. Photos worked; transitions worked, the theme worked..... and then I got to music. I added 3 tracks and at 15 min 44 sec, my issue started again. I thought that maybe I had run out of hard drive space (I've read several threads on here that suggest a laptop is not ideal for PE 4 - a CPU works best). But if that were true, shouldn't my project have worked when I deleted the songs from the project? I've tried everything and am a loss. I've contacted Tech Support and am still waiting for an answer. Any tips would be greatly appreciated!

When I have program closed due to DEP I have always had a warning message saying that DEP is closing the program... and then given the option to disable it for the program.
What format is your audio by the way... MP3 can sometimes make PE7 do funny things... best to convert to WAV. You could also try the Render and replace for your timeline (under Audio) this will do what it says, render your timeline and replace it with a WAV file.

IPhone photos slideshow transition setting..

iPhone photos slideshow transition setting has 5 options (e.g. cube, dissolve, etc.).
I hooked up iPhone to my TV to watch the photos and the setting doesn't seem to do
anything. Am I missing something?

I just compared my iPod classic to the iPhone and just now realized how limited the transition selection is! And, it's not the same for the classic and the iPhone (no ripple or cube on the classic).
Anyway, I see the same thing here with the ADDED issue that some of the images don't display at a high resolution while playing, but if I go back and display one by one, they do. The classic DOES display the same as what would display on the screen, but it's transitions are simple by comparison.
Wonder when we'll see these again.
http://homepage.mac.com/makentosh/iMovieTheater43.html

How do i make a photo slideshow / banner for the welcome page in iWeb

How do i create a photo slideshow or fading slidshow for the welcome page in iweb

There are trillions of slideshows to be found on the internets.
Download the one you like, make it work the way you want and put it on the server.
Display it in the browser to see if it looks the way you want.
Then use the <iframe> html element to display it in a HTML Snippet.
Like this :
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
http://www.wyodor.net/_Demo/MyHouse/
You can also browse/search this forum to see if it has been discussed before. It has.

How to create a photo slideshow in my movie

Hello all,
Im woking on my first movie with Premier Elements 12 and I can not figure out how to include a slideshow of pictures at the end of my movie.
Of course I can drag the photos on the timeline and use trancients in between but there is nothing I can do with the picture like editting/cut parts off, make them black/white and use movement effects for example.
Isnt this an option/included in Premiere lements 12 ?
I just bought the software but also played around with the trial of Cyberlink Powerdirector which has this handy magic function to select all pictures at once and create different/random trancirents and effects and pictures could be editted also.
This is what Im after but I can not find how to do this stuff in Premiere lements 12.
Hope someone can help me out.
Thatnks in advance

AlexSan
Do you have Photoshop Elements 12 as well as Premiere Elements 12?
What is this "movie" that the photo slideshow is going to be at the end of? A video? If so, what are the
properties of that video...video and audio compressions, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio?
What is your intended final product...DVD-VIDEO standard or widescreen on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc?
With the above information, I will suggest some approaches that you might want to look into.
Thanks.
ATR

How to apply a specific music for each photo slideshow

I'd like to setup a specific music for a specific photo slideshow, and to store that preferences, in some way, so that, on selecting a slideshow, automagically startup the specific song.
Is it possible ?
Seems not ... yet.

You can do that by preparing the slideshow in iphoto instead of on the tv, you then have to ensure you sync the slideshow and the tunes you have used in the slideshow before playing it on the tv.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454

HT3798 On iPod 160gb - how can I view album art full screen like in the menu half screen or photo slideshows?

I remember responding to an apple customer satisfaction survey in 2009, when I purchased my iPod Classic. I suggested it should be possible to have album art viewed in full screen like in photo slideshows or how album art is presented on half the screen when the menu is navigated to the 'music' list. Does anyone know if apple has created an iPod Classic software update which includes this glaring omission?

The progress bar is not the iPod disconnecting from the PC but rather the iPod reading in the library database from it's hard drive. It's safe to disconnect when told to.
tt2

Stop and start a photos slideshow

Hi .. So I want to use the photos slide show to execute a presentation .. But this means I need to start the slideshow and then stop, present the slide (a photo of the slide in fact), and then continue to the next photo .. I.e. I want manual control of the slideshow. Is this possible without having to stop and restart the whole slideshow?
Thanks.
Btw keynote cannot handle my large ppt files, and photos/slideshow is the only other app I can find that outputs to the via and my tv/projector, hence I converted the talk to a jpeg and loaded it as a sequence of photos! It would be quite a lot easier if good reader could output to the VGA, or keynote display PDF files.

Hi,
If you do the slideshow from the opening screen (Picture Frame), the iPad allows for no control other than stopping the show completely. If you run the slideshow from within the Photo app, if you stop a slide (you have to touch it and move it a bit to get it to stop), then the whole slideshow stops and you have to restart it again in the usual way. So Craig is right. Just put your presentation in an album, open the album and manually swipe to the next photo when you're ready. The only practical way to get the photos onto the iPad is to sync them to the Photo Library album (you can't sync to the Saved Photo album and you can only get pictures in there either from Safari or from email- unless I'm missing something), which means you'll be losing the ones that are already there. But that shouldn't be a problem if you just store them on your main computer and synch them back after the presentation's done.

My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas

My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas?

Are you seeing this
when you double click on a thumbnail file? If so it's an indication that the file path/link between the thrumbnail and original, full sized file has been broken. Therefore, and assuming you're running iPhoto 9 or later, try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT

Photo slideshow issue

Similar Messages

Maybe you are looking for