Photomerge - problem with auto fill

I am looking for a manual on how to switch off the auto fill function for Photomerge (once enabled to automatic).
On first use of Photomerge there is the following dialog:
Clean Edge
Would you like to automatically fill in the edges of your panorama?
Always perform this action
The question of "Always perform this action" has a checkbox. I did use this checkbox, and now I am looking for a way to reverse that.
I did not find it in the manual, and Google also could not help.
I think in general that to provide such a "hidden option" (and which is not easy to reverse) is NO-GO for good software
Anyone in here?
Thank you for your attention.

In the pse9 editor,Go to Edit>Preferences>General and click on reset all warning dialogs.
MTSTUNER

Similar Messages

Strange problem with auto-fill addresses in mail and address book

There's an entry in my address book (version 4.0.6) that keeps adding a first name to an entry. I keep deleting it and somehow the first name keeps getting added. I suspected that Mail (2.1.3) was using auto-fill or LDAP to take the name it remembered in Mail and put it in Address Book by associating the email address, so I turned off LDAP and auto-fill and the problem still persists.
As an aside, I use mobileme to sync two macs (Address Book) and a pc (Outlook) so I really want to clear up this problem so the phantom entry does not keep getting transfered to all databases.
Should I delete some cache or something? One other problem (unsure if it's related) is that my Mail application always ask for my keychain password on startup - I have tried the keychain repair app and it seemed to work once, though this problem persists, as well.
Thank you in advance!

Yes. the dot in front makes it invisible.
Show hidden files...
Open the terminal and type or copy/paste:
defaults write com.apple.finder AppleShowAllFiles -bool true
Reverting to the default of NOT showing hidden files:
defaults write com.apple.finder AppleShowAllFiles -bool false
Reboot or Force Finder quit needed for either change to show.
I'd move them both to the Desktop then reboot, if it works fine then you can Trash them.

I've been having a problem with auto-fill in the email on my ipod touch.

I have updated to new email addresses, or accidnetly typed in the wrong on, and now the email addresses won't go away, even though they're not in my contacts. So when i said for instance i want to send a message to [email protected] and it just changed to [email protected], the [email protected] keeps popping up even though i dont need it anymore and it has been removed from my contacts. I have also looked on the internet if any other people have had problems, and they all have had iOS4, and all of them have the same problems except for some, the copybot.com worked, but as well a couple said it did not. I really hope apple updates the software once again and removes the autofill from all email addresses.I have updated the iOS5.1 software, i have the 4th generation ipod touch, and yes i've tried to copybot.com and selected each previous sent email address one by one and restored it, but nothing changed and it wasn't fixed. I have also went into the settings and went to change the auto-correction tab, but that as well didn't work. I dont know if im the only one with this problem, but cant you please help:/ It really is a bother. Thanks(:

I know of no solution except for restorng the iPod to factory defaults/new iPod. Have you made a suggstion to Apple to all resetting email autofill?
Apple - iPod touch - Feedback

Problem with auto fill

Hi,
I just got my iPad a few days ago, and let me say it is too cool! I love it already. Anyway, one minor frustration is whenever I type in my email address (as a username for certain sites, etc.) the autofill always inserts the wrong name. My email ends in comcast.net, but when I type this in, the iPad forces it to com cast.net (it puts a space between m and c. How do I fix this?
Thank you.

On my ipad, when I type the address, it gives me a list to choose from. If I continue typing, it will narrow the list until I have the exact spelling. Try continuing to type and do not use the list to select. It should then learn the correct email address. Not sure how to clear out teh wrong spelling, so you'll have to pick the correctly spelled one.

Mail has problem with auto address.

My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

My mail recently has had a problem with auto
addressing. Sometimes it fills in the address, at
other times it will not. I have checked mail
preferences often...making sure auto-address is on. I
CAN use the address book to click on an address when
auto addressing doesn't work. Mail is also quirky
about quitting and sometimes preferences have to be
re-edited to send. Basically, it is behaving badly.
What to do? Thanks ACE
Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

Having problems with gradient fill.

Having problems with gradient fill. Not sure how to select the gradient circles between outer circles consistently especially when there are more than 3 colors.

Hi,
It should be somewhat easier to try that out in landscape orientation. Does that help?
thanks,
Ignacio

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Problem with applying fills & strokes to grouped objects in Illustrator CC

I have this problem that I deal with everyday & I can't figure out how to fix it.
I am always struggling with applying fills & strokes (or changing fills & strokes).
It seems like I always have to ungroup the objects first (even if I never grouped them in the first place), or I have to clear appearance first. Sometimes I have to ungroup several times, even if it is only one object by itself, not grouped with anything else.
I think It may have something to do with the pathfinder... like the pathfinder is creating groups when I use the divide filter.
Even when I use the direct selection tool, to select just the object I want, it wont let me apply the fill or stroke that I want.
Also, it seems like it has several layers of appearance... when I ungroup the object, it changes appearance (the fill or stroke changes).
Also, if I eyedrop the object to apply its appearance to another object, the "hidden" appearance is the one that gets appled to the new object.
The closest discussion I could find was about compound paths, but I think this is a different issue, because when I go to compound paths in the menu, it doesn't give me the option to release anythig.
I have this problem ALL DAY LONG, every day. Please help!!

Thanks for your reply!
I see what you are saying, and I think is some cases that could be a helpful trick - but the problem I'm having is slighlty different.
The object that I want to change doesn't show the actual appearance... it only shows its underlying appearance after ungrouping several times, and then when it is completely ungrouped, it visibly changes to another fill & stroke. This happens even when the object is not grouped with anything... it is just grouped to itself i guess & I am not grouping these items, they just become grouped somehow - I think because of the pathfinder. I often have to ungroup 3-5 times, which is a hassle in iteself... but sometimes I actually need to grouping to keep items togther so I can manage all the ojects & move them around as needed.
So... the method you are suggesting could possibly solve the issue, except I don't know what the fill & stroke is until I ungroup everything, so I can't create the swatch off to the side to match it. The other thing is, it seems like I would be creating a lot of swatches, since I use lots of different fills & it seems like it would be a lot of extra work.
Here is an example of 2 objects before using the pathfinder. Please note how the object selected & the fill & stroke boxes all jive:
Now here are two images after using the pathfinder tool (I added another object to get the problme to happen). Please note how the fill & stroke boxes do not match the objects selected:
This is what happens when I try to change the fill to green (the fill does not apply):
I thought it had something to do with compound paths, but as you can see below, the menu doesn't give me an option to release compound paths:
The final image is what happens after I ungroup the objects:
I don't understand:
1) why pathfinder is grouping these objects
2) why the strokes & fills change & why the fill & stroke boxes don't match the actual fill & stroke.
3) why I can't change the fill or stroke without ungrouping (even when using the direct selection tool).
4) why the fill & stroke change again after ungrouping

Problems with auto-cap of I on ios6?

I upgraded my 4s to iOS6 and not my auto capitalization of "I" is not working. Anyone else have this problem or know how to fix it?

Yeah I tried making a shortcut to make i into I, but it has to be two characters. I guess I'll just go into the store tomorrow and see if anyone else has had problems with it with iOS6. I haven't heard that anyone has had any wonderful experiences with it yet

ProDAD Mercalli w/ CS5 Clip desaturation with 'auto-fill colors'

Issue with proDAD Mercalli w/ CS5
W7x64 w/latest patches of everything
When selecting ‘Border Handling’, ‘Auto-fill colors’, the clip is desaturated. Allowing a black border and the saturation returns to normal. Simple option toggle, 100% repeatable.
Settings:
Glide Camera
HDV clip
HDV sequence
Roll, Horiz and Tilt 50%
No rolling-shutter
No Avoid Border
Border Handling=Best Stabilization
Any ideas?

using v2/latest rev
usually works. this is one of the few times i needed 'best' settings.

Problems with auto-enroll with the certificate expiration

Hello,
we have routers that work with certificates. We have problems with the auto-enroll when the certificates go to expire.
?Can somebody help?
I can send mor debug o configurations.
We attach a debug.
Very thanks

Hello,
I attach the debug.
Very thanks

Problems with black fills in live trace(d) eps images in Word and certain printers

Hi folks, PLEASE help me with this if you know a possible solution. I regularly run Live Trace in Illustrator CS3 on my grayscale bmp or tiff scanned images, save them as an eps, then folks in other departments insert them into Microsoft Word pages. Sometimes these images display in Word with unintended black fills, and some printers print them out with the same corrupted appearance, yet some other printers print them fine (even if the display in Word shows them with the unintended black fills). I THINK this might be a postscript issue (?). I don't have the option of telling everyone to change from Word to InDesign (which would absolutely solve the problem immediately). Is there something I can set while performing Live Trace? They really need the eps files, so I don't have the option of saving them as another format. HELP! Thanks...

I use Mac at home and love it. At work, we use PC platform. I can't save as a pdf because they need to stay vector graphics. he departments want us to save the eps in version 8 because they're STILL using Windows 2003 (ugh). I keep thinking there must be something I can do while in Live Trace because we've never noticed any inintended black fills in graphics not created using Live Trace. Somehow, Word and some printers are not interpreting some postscript language correctly. InDesign has zero issues with it. Some printers have no problem with it, so I assume they are postscript printers. There's got to be a way I can still save as an eps but without the postscript conflict (IF that's what it is).

Problems with Auto approval workflow (WS 10000060) for shopping carts

Hi SAP Network community,
I have got a problem with the auto approval workflow for shopping carts.
Basically the workflow approves the shopping cart once it was created.
But then the related Purchase Order remains in Status held. If the PO gets ordered manually then it is not transferred to the R/3 backend system.
For testing purposes also the one step approval workflow was activated. If the shopping cart gets approved by clicking into the detail approval screen (not by approving through the green tick box in the shopping cart overview) then the PO gets ordered and transferred to the backend system as normal.
But if the shopping cart gets approved by using the green tick box in the shopping cart overview then the same problem occurs as described for the auto approval workflow.
The system version is SRM 4.00
Did anybody have the same or similar problems with the auto approval workflow and what could be the reason for this problems.
Thanks in advance,
Robert

Hi
Which SRM Workflow Scenario are you using (IS it Item level workflow or Shopping cart level Workflow) ?
Are you using customized SRM Business workflow or Standard SRM Workflow ?
<u>Please go through these links as well.</u>
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/eb/289f4099852e54e10000000a1550b0/frameset.htm
Incase you are using Standard SRM Workflow, please raise an Customer OSS message with SAP at the earliest.
Regards
- Atul

Aperture 3 : recurring quality problems with "auto levels"

Hello all,
I've been using Aperture 3 since the day of its release, and I have recurring problems with the quality of the "auto levels" output, compared to plain old Photoshop CS3. Auto-levels in Aperture 3 frequently output grainy results.
Here are some samples (look at the central vertical darker part of the image) :
— original image (well, part of it) shot using my Canon EOS 400D :
http://plainsong.online.fr/aperture/Original.jpg
— the same original image with "auto levels" applied in Photoshop CS3 :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop.jpg
— the same original image with "auto levels" applied in Aperture 3.0.1 :
http://plainsong.online.fr/aperture/Auto-levels-Aperture.jpg
And here are both "auto-levelled" images zoomed in for convenience's sake :
http://plainsong.online.fr/aperture/Auto-levels-Photoshop-ZOOM.jpg
http://plainsong.online.fr/aperture/Auto-levels-Aperture-ZOOM.jpg
I would like to know if I'm the only one to get such crappy results in Aperture, on a not insignificant number of photos. These poor results are very visible in some photos. This is really irritating, because this lack of quality means I have to open those images in Photoshop just to apply auto-levels. And I thought Aperture would be smart enough to spare me those round-trips!
(By the way I've never had this kind of quality problems in Photoshop.)
Please share your experience. Thanks!

Here is another example :
http://plainsong.online.fr/aperture/Example2.jpg
Aperture auto-levels seem to choke on dark areas. Will we be obliged to bright and sunny shots ?

Photomerge - problem with auto fill

Similar Messages

Maybe you are looking for