Photos Do Not Appear When Dragged Into Ibooks Author

I formatted my images to 72 DPI .png files and when i drag and drop them into Ibooks Author I can see them, I can manipulate them, resize,  add captions.  When I do a test the images appear in the text view portriat mode of the Ipad but when in the landscape mode, the images do not appear. There is just a blank space with a caption.   If I create a photo widget and drop the photo inside I am able to see it on the Ipad however that widget does not allow me to resize as I would like.  Does anyone have a fix for this issue or an idea?
Thanks
Chris A. 

Confirm your process here:
Optimizing performance in your iBooks Author books
...and try jpg for photos instead of png.
And remember - layout in landscape...edit in portrait. Always delete a placeholder image before adding your own.

Similar Messages

  • Photos do not appear when I'm trying to construct a Book in iPhoto 08

    I really hope someone can help me understand why some picture images do not appear in the photo window strip of iPhoto 08, when I go to make a Book. These same images appear in my Library - but just seem to vanish in Book/Project mode!
    All the photos from my digital camera seem to appear OK ... but I have noted the images (jpgs) in question are ones I've downloaded from the Net - legitimately from friend's UGC sites (with permission and which do not breach any copyrights).
    I cannot work out what is going on - as older images I've previously downloaded from the Net - which were imported into earlier versions of iPhoto - ALL appear! I've also tried renaming the jpgs removing all '&' type symbols and reloading them into iPhoto - but still without success.
    Any help will be much appreciated.
    Cheers,
    axiom303

    Hi TD,
    Yes they do appear in full size and I can edit them. I've just realized that it's not just photos from the Net that are not appearing - it seems to be happening for all photos I've imported into iPhoto after a certain date.
    After spending many more frustrating hours trying to work this out, I found that if I click all of the 'events' which contain the photos I'm after and then create a Book - all these photos appear in the selection window strip. However I still need to work out a proper solution as this still limits me to only those photos in the highlighted 'events' and no new pictures can be added to that particular Book.
    Heeeelp please!
    axiom303

  • Tab does not show when dragged into it's own new window

    This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
    Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
    A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
    If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
    Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
    Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
    Any help or suggestions would be greatly appreciated.
    Many Thanks!

    I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
    (I'm running Firefox 9.x on OSX Lion)
    I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

  • Yahoo mail sent through Mail app do not appear when login into Yahoo mail

    Hi everybody,
    I have a problem that annoying me very much. I've used Yahoomail for very long before I bought a MBA. For the first time I use Mac OSX, I try to use Mac mail combine with my old Yahoo mail. Actually, I have done the config. But anything I do with my Yahoo mail through Mail app can't appear when I login into original Yahoo mail. For example: I sent a Yahoo mail through Mac mail, it's shown that the mail was sent sucessfully, but when I try to login into Yahoo mail on Web, the sent mail doesn't exist. And the same happen when I do the opposite: the mail I sent on Yahoo mail doesn't exist on Mac mail. It's a big trouble if I use other lap and try to contact with someone. So is there any solution can fix it?
    Many thanks

    I'm having the same problem, and the only help I ever seem to find suggested anywhere is "make sure its set up as an IMAP account"
    BUT it is! Mail automaticly sets all yahoo accounts up as IMAP. So is this just a yahoo problem? Is there anyway to fix this?
    For me the bigger issue isnt that I need to be able to check my e-mail through a web browser regulerly, but on my Iphone and Ipad the account, which is through the mail app, also dosnt show sent mail sent through the mac app.
    I agree this makes mail on my mac totally usless.

  • Changes made on my iPad do not appear when plugged into iTunes; missing album art on iPad.

    If I make changes to the music on my iPad--i.e. delete songs/albums, add ratings, add a song to a playlist--when I plug my iPad in to view the contents in iTunes, none of these changes have been saved. The deleted music reappears, the ratings do not show up, and the new songs are not in the playlist.
    Additionally, when I have my iPad plugged in to my Mac, all of my album art shows in iTunes. However, if I look at the music on my iPad by albums, much of my album art is missing.
    Any suggestions?

    Visionplace, i have the issue where my ipad2 changes/edits to my current playlists are NOT synced up with my itunes 11 on my computer (Windows 7).  I have icloud and Itunes Match is turned on.  My settings are to auto-sync and i have ALL my music set to be synced, not just select playlists. (Note I have not tested whether new playlists will appear because i usually just edit my existing ones).
    So whenever i make playlist changes on my ipad2 (e.g., add or delete songs), i see the changes correctly on my iphone 4, and my Apple TV within 15 minutes without taking any steps, but they do NOT appear on my itunes 11 on my computer (Windows 7).  The only way i have found to get the ipad2 playlist edits onto my itunes on my computer is to sync my iphone4 up with the computer. (My ipad changes are already on the iphone 4 automatically). My computer's itunes 11 CAN see the playlist edits i have made on the iphone4 (immediately), but not the ipad.  It *****, but it works for me.
    For new music purchases (from itunes store) on my ipad2, the only way i can see them on my itunes 11 on the computer is to go to the store, and download them again. Otherwise, they will not appear.
    Note - in another forum when i was researching this ipad sync issue, someone had stated that the ipad/computer sync is one way. (I.e., from computer-to-ipad only). If true, that would explain why the ipad edits and new music purchases dont show up in my computer itunes. However, the iphone sync must be two ways.

  • Contact photos do not appear when making a call.

    I have noticed that even though I have photos for my contacts that not all of them show up when I call a particular person. Some show up and some don't. Has anyone discovered this same issue found a solution to this problem yet?

    Anyone?

  • Dropdowns not appearing when logged into a webbased software product.

    Hello,
    I have some webbased software that I'm a member of and there is a navigation area where dropdown boxes will appear if i'm on my pc using any browser. According to the developer, the dropdowns are written in javascript. In my iphone though, the dropdown functionality doesn't occur. When mousing in the nav area, no dropdowns open up. I do have javascript enabled on my phone. Is there anyone that might know how to get these dropdown areas to function? Thanks.
    Steve

    Hi Peri,
    You can see this.
    Posted by Ashok Babu Kumili.
    http://scn.sap.com/community/epm/blog/2014/05/07/configure-epm-add-in-ms-office-excel-and-troubleshooting-configuration-issues
    Regards.

  • When I drag pdf files into iBooks Author, the background in the pdf file changes into the colour of my book (brown/beige)?

    Hi,
    when I drag a pdf file (when working in Preview) into iBooks Author, the background colour in the pdf file changes into the background colour of the book.
    This happens not consistently, sometimes the background of the pdf file does not change (and stays white), sometimes it's like the text in the pdf file is 'lifted' of the file, and put on the page in iBooks Author (with a brown/beige background).
    All the pdf files are scanned pdf's, nothing comes out of Pages, Word, Excel,...
    Anybody?
    Thanks a lot!
    Wouter

    I have the same question (posted here: https://discussions.apple.com/message/25644741#25644741).
    I believe this is because the PDFs have transparent backgrounds. As far as I can tell, the only way to fix it is to export the PDF as another file, such as an image file. Or perhaps convert it to Word and import it that way.

  • HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

    When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
    If i backspace everything and start typing again in the same area, it will work properly the second time.
    I am using a ~7 month old macbook air with mavericks.
    Any tips to get rid of this issue would be greatly appreciated.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */   /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • Photos in 9.2 do not appear when viewed through screen sharing

    I recently upgraded my Mac Mini, which stores my master iPhoto library, to iPhoto 9.2.  Because this Mac Mini is also used as a media server for an AppleTV, I almost always operate the computer through screen sharing using a MacBook Pro, rather than connecting it to a television. Both computers are running OS 10.6.8.
    Since upgrading this setup to iPhoto 9.2, I can no longer view photos in my iPhoto library through screen sharing. Previously, I had noticed that I could not view certain other things through screen sharing (such as watching DVD's).  For example, I couldn't view individual photos in detail in iPhoto, but I could view them in grid view. Now I cannot even view them in grid view anymore.
    Is there a graphics library that is not compatible with screen sharing that is now being completely used by iPhoto?  Is there a setting that I can check?  Any help would be greatly appreciated.

    Thanks, Michael.
    I will give it a try.
    Avox Systems Web Site: http://www.avoxsys.com
    AVOX SYSTEMS
    AIRCRAFT SYSTEMS
    Rick Barusic
    Senior Technical Writer
    225 Erie Street - Lancaster, NY 14086 - USA
    Tel: 716-686-1706
    [email protected]
    http://www.zodiacaerospace.com
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination, or other use of or
    taking any action in reliance upon this information by persons or entities
    other than the intended recipient is prohibited. If you received this in
    error, please contact the sender and delete the material from any
    computer.
    From:   MichaelKazlow <[email protected]>
    To:     rick barusic <[email protected]>
    Date:   11/24/2010 10:32 PM
    Subject:        Some CGM graphics do not appear when
    FrameMakerfiles are converted to PDF
    First you should update to the latest version of Acrobat 8, since you say
    you are running Acrobat 8, you should update to 8.2.5. Update your
    FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
    try using a different settings file. Perhaps High Quality or Press
    Quality. I would never use Standard for anything where fidelity is
    important.

  • HT201406 1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

    1st. Gen iPad question:  the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present.  Tapping screen just brings up the option to: "Select   Select All   Paste."   I have rebbooted with no change. 
    Message was edited by: Jimfromutah
    The problem was my connected bluetooth keyboard.

  • I have one photo caption which will not appear when I preview my photobook

    Does anyone know how to fix this problem?
    I have just assembled a photobook with captions for most of the pictures.  One of the captions will not appear when i preview the photobook although it does appear in the assembled book.

    Delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder, launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    OT

  • My edited photos will not display when clicked on, a large triangle with exclmation comes up

    my edited photos will not display when clicked on, instead a large grey area comes up wiht a triangle /exclamation sign. 

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

Maybe you are looking for