Photoshop Album 3.0 Bilder speichern

Hallo zusammen, wer bitte kann mir helfen:?? Ich finde nirgendswo die Information, in welcher Datei Photoshop Album die Fotos abspeichert, da es auch keine "Speichern unter.." Option gibt. Ich möchte das jeweils bearbeitete Album irgendwo sichern (andere Festplatte, USB Stick etc.) und immer wieder reinladen können, wenn's mal gecrasht hat, wäre ja sonst alles weg!!
Ich bitte darum mir (auch?)unter meiner E-Mail zu antworten [email protected]
wenn das möglich ist.
Herzlichen Dank
Willi Wacker

Im Prinzip ja. Es gibt auch eine kostenfreie Version: "Adobe Photoshop Album Starter Edition 3.0". Das ist aber eine reine Album oder auch Organizer Version mit eingeschränkten Funktionen. Ob da das Brennen etc möglich ist weiß ich nicht; vermutlich nicht.
Das "Album" ist keine Version. PSE 3.0 und 4.0 besteht imPrinzip aus zwei Teilen oder auch Prgrammen. Dem Album, in der PSE Terminologie auch "Organizer" genannt, sowie dem Editor, also demjenigen Programm was dann die eigentliche Bildbearbeitung vornimmt. Beide Programme sind durchaus auch separat zu starten. Sie gehen allerdings sehr eng Hand in Hand sozusagen. Man sucht und betrachtet die Fotos im Organizer um sie dann ggf. an den Editor zu übergeben, der dann die mehr oder weniger gewünschten Änderungen vornimmt, und anschließend diese Änderungen als eine neue, zusätzliche Datei als sog. "Versionssatz" dann wieder im Organzer, also dem Album, abspeichert; im großen und ganzen. Anders formuliert: "Bildbetrachter" und "Bildbearbeitungsprogramm" sind hier zwar absolut getrennt voneinander, aber dennoch sehr eng miteinander verbunden. Die Übergaben von dem einen zum anderen Programm und auch wieder rückwärts gestalten sich gerade in PSE 4.0 als sehr flüssig. Man muß sich hier allerdings unbedingt mit der für dieses Programm typischen Denkweise vertraut machen, sonst erleidet man Schiffbruch. Z.B. sollte man, wenn es um das Umbenennen oder verschieben von Dateien geht, dies generell nur noch über den Organizer machen. Der Explorer sollte dann Tabu sein, andernfalls kommt Murks heraus!!!

Similar Messages

  • Photoshop Album 3.0 Bilder  mit Tags auf DVD brennen? Geht das?

    Hallo,
    ich möchte Photoshop Album 3.0 Bilder mit ihren TAGS auf DVD brennen (=sichern). Ich finde aber im Programm keinen Weg dorthin.
    Wichtig ist, dass die jeweiligen TAGS zusammen mit den Bildern auf DVD mit gesichert werden.
    Wie geht das bitte? Muss ich software zukaufen?
    Wäre froh für einen Tip!
    maglev2020

    Im Prinzip ja. Es gibt auch eine kostenfreie Version: "Adobe Photoshop Album Starter Edition 3.0". Das ist aber eine reine Album oder auch Organizer Version mit eingeschränkten Funktionen. Ob da das Brennen etc möglich ist weiß ich nicht; vermutlich nicht.
    Das "Album" ist keine Version. PSE 3.0 und 4.0 besteht imPrinzip aus zwei Teilen oder auch Prgrammen. Dem Album, in der PSE Terminologie auch "Organizer" genannt, sowie dem Editor, also demjenigen Programm was dann die eigentliche Bildbearbeitung vornimmt. Beide Programme sind durchaus auch separat zu starten. Sie gehen allerdings sehr eng Hand in Hand sozusagen. Man sucht und betrachtet die Fotos im Organizer um sie dann ggf. an den Editor zu übergeben, der dann die mehr oder weniger gewünschten Änderungen vornimmt, und anschließend diese Änderungen als eine neue, zusätzliche Datei als sog. "Versionssatz" dann wieder im Organzer, also dem Album, abspeichert; im großen und ganzen. Anders formuliert: "Bildbetrachter" und "Bildbearbeitungsprogramm" sind hier zwar absolut getrennt voneinander, aber dennoch sehr eng miteinander verbunden. Die Übergaben von dem einen zum anderen Programm und auch wieder rückwärts gestalten sich gerade in PSE 4.0 als sehr flüssig. Man muß sich hier allerdings unbedingt mit der für dieses Programm typischen Denkweise vertraut machen, sonst erleidet man Schiffbruch. Z.B. sollte man, wenn es um das Umbenennen oder verschieben von Dateien geht, dies generell nur noch über den Organizer machen. Der Explorer sollte dann Tabu sein, andernfalls kommt Murks heraus!!!

  • Photoshop Elments 3 Organizer vs. Photoshop Album 2

    Hi Leute,
    ich wollte mal fragen, ob mir jemand Infos geben kann, was an dem Organizer in Photoshop Elements 3 anders/besser ist als Photoshop Album 2.
    Danke Im Vorraus

    Also: PSE 3 ist insgesamt "flüssiger" als PA 2 was die Oranisation von Bildern anbetrifft; demgemäß: Empfehlenswert. Aber: PDF Diashows, ggf. mit Musik, kannst du mit PSE 3 nicht mehr erstellen. Ich finde das überaus eigentümlich! Und aus diesem Grund habe ich also neben PSE 3 auch noch PA 2 laufen, nur um diese Diashows weiterhin erzeugen zu können. Echt beknackt!!! Die Möglichkeit der Erzeugung von Versionsstapeln und allgemeien Fotostapeln ist schon sehr ordentlich, und die Abfrage, nachdem ein Foto bearbeitet wurde, wie und wo es den nun gespeichert werden soll, ist in PSE 3 auch bedeutend besser, nachgerade komfortabel, geworden als in PA 2. Wenn Du also auf PSE 3 umstellen willst: Tu es! Wenn Du allerdings so wie ich auf diese pdf Diashows (im Albummodus) "scharf" bist, dann laß es besser mit der Umstellung oder du mußt es wie ich parallel laufen lassen, was allerdings kein Problem ist, denn PSE 3 und PA 2 speichern ihre Kataloge an unterschiedlichen Stellen, sodaß sich die Kataloge nicht ins Gehege kommen. Mein PA 2 Katalog ist vollkommen leer. Ich lade dort nur die Bilder, die ich in einer Diashow präsentieren will, und lösche sie anschließend wieder aus dem Katalog, bis ich die nächste Show erstelle. Berichte doch gelengentlich mal von Deinen Erfahrungen. ([email protected])

  • Photoshop Album und Nikon D70

    Hallo!
    Seit einiger Zeit benutze ich jetzt Photoshop Album 2.0 und bin sehr zufrieden damit. Nun habe ich eine neue Kamera, eine Nikon D70, und möchte das RAW (NEF)-Format ausnutzen. Leider kann es Photoshop Album nicht lesen, so daß ich jetzt "gezwungen" bin andere Programme für die Archivierung zu benutzen.
    Meine Frage: Gibt es irgend wie eine Möglichkeit, RAW (NEF)-Bilder in diesem Programm zu speichern? Alternativ: Ist dies in einer neuen Version vorgesehen?
    Danke!

    Leider nein, das RAW-Format der D70 wird (noch) nicht unterstützt.
    Im englischen Forum haben sich schon zig Leute gemeldet, die diese Unterstützung gerne hätten. Vielleicht erhört Adobe diese flehentlichen Bitten ja eines Tages ...
    Alexander.
    1533 MHz, 1 GB, XP Pro, Canon Ixus 430 (aka S410), CanoScan D1250U2F, German PSE v2.0.2 + PSA v2.0.1

  • Adobe Bridge - Photoshop Album

    Kann Adobe Bridge die Daten aus Photoshop Album importieren?
    Danke

    Bridge liest Original-Assets ein, also nicht Datenbanken anderer Programme. Wenn Sie den Ordner aufrufen, wo Ihre Bilder sind, dann zeigt Bridge alle Dateien darin an, nicht nur Bilddaten.

  • Wer hat Erfahrung mit Katalogimport aus Photoshop Album 2.0 in Lightroom

    Ich bin aktuell in der Kaufentscheidung zu einer neuen Fotoverwaltung. Ich habe überwiegend Familien- und Urlaubsfotos, die alle getagt sind (Kategorien und Personen). Bevor ich mich für Lightroom entscheide, möchte ich wissen, ob ich den Katalog mit den Tags aus Photoshop Album 2.0 in Lightroom übernehmen kann. Ich bin für konstruktive Informationen Dankbar!

    Muss man nicht lange rumeiern: Die Antwort ist Nein. Du verwendest ein gnadenlos veraltetes Produkt und der Katalog ließe sich noch nicht mal in ältere Versionen von PS Elements importieren, weil das ein auf die Schnelle zusammengewürfeltes Format ist, dass mit den heutigen XMP-Daten nix zu tun hat. Alles, was nicht nativ in den EXIF/ IPTC oder sonstigen Metadaten der Bilder selbst steht, wird nirgendwoe anders auftauchen oder verfügbar sein.
    Mylenium

  • Photoshop Album Starter Edition Ausdrucke

    Obwohl ich sämtliche Einstellungen im Druckermenu von Photoshop Album Starter Edition auf besten Fotodruck stelle, werden die Bilder nur in schlechter sumpfiger Qualität,dafür aber schnell, gedruckt.
    Ein perfekter Ausdruck ist weder beim Drucken eines Kontaktbogens noch beim Ausdruck eines einzelnen Bildes möglich.
    Ich arbeite mit Windows XP SP2 und dem Epson Stylus Photo 1200.
    Was mache ich falsch? Oder genötige ich doch die "Vollversion"?

    Hallo Thomas,
    PSAlbum hat bekannte Probleme mit den Druckereinstellungen.
    Versuch mal, die Einstellungen direkt am Standard-Drucker zu ändern (über Start > Systemsteuerung > Drucker) und ignoriere die Druckereinstellungen in PSAlbum.
    Am einfachsten ist es, eine zweite Instanz des Druckers mit den gewünschten Photo-Druck-Einstellungen zu "installieren" ...
    Alexander.
    Canon Ixus 430 (aka S410) | x86 with XP Pro | 12" PowerBook G4 with OS X 10.4.1 | PSE 3

  • Tags aus photoshop Album in CS2 uebernehmen

    habe bisher mit Photoshop Album und CS gearbeitet und moechte nun Bridge anstelle von Album benutzen. Gibt es einen Weg die im Album angelegten Tags in Bridge zu uebernehmen?

    Muss man nicht lange rumeiern: Die Antwort ist Nein. Du verwendest ein gnadenlos veraltetes Produkt und der Katalog ließe sich noch nicht mal in ältere Versionen von PS Elements importieren, weil das ein auf die Schnelle zusammengewürfeltes Format ist, dass mit den heutigen XMP-Daten nix zu tun hat. Alles, was nicht nativ in den EXIF/ IPTC oder sonstigen Metadaten der Bilder selbst steht, wird nirgendwoe anders auftauchen oder verfügbar sein.
    Mylenium

  • Photoshop Album Tags

    Hallo,
    ich hätte da mal ne Frage zu den Tags in PSA (nutze die 2er Vollversion). Wie ist das bei einer Formatierung der Featplatte, kann man die Tags irgendwie exportieren oder ist die ganze Arbeit nach einer Neuinstallation des Betriebssystems u. PSA dann futsch?
    Grüsse
    Jürgen

    Die Tags (ebenso wie Kollektionen und alle anderen wichtigen Daten) speichert PSA in der Katalogdatei "Meine Bilder.psa". Diese liegt üblicherweise in "C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\Adobe\Photoshop Album\Kataloge".
    Es gibt zwei Möglichkeiten, ein Backup für Notfälle anzufertigen:
    1. Über PSA selbst, Menü "Datei > Backup > Katalog-Backup", auf CD/DVD oder auf eine (externe) Festplatte.
    2. Selbst alle Bilder sowie die oben erwähnte Katalogdatei sichern. Dabei ist zu beachten, daß zum Wiederherstellen einer solchen Sicherung die Biler in _genau_ dieselbe Verzeichnisstruktur zurückkopiert werden müssen. Der Speicherort für die Katalogdatei selbst kann beliebig gewählt werden.
    Alexander.
    1533 MHz, 1 GB, XP Pro, Canon Ixus 430 (aka S410), CanoScan D1250U2F, German PSE v2.0.2 + PSA v2.0.1

  • Seitenverhältnis Photoshop Album

    Hallo,
    ich verwende seit einiger Zeit Photoshop Album 2 und bin jetzt auf ein Problem gestoßen, das mir vorher noch nicht aufgefallen war.
    Ich habe die Funktion verwendet, bei der meine Bilder automatisch gedreht werden. Das hat eigentlich auch immer ganz gut funktioniert, nur musste ich jetzt feststellen, dass die Bilder dabei beschnitten werden.
    Ursprünglich kommen sie aus meiner Kamera mit 2592x1944 Pixeln (also 4:3). Wenn ich sie drehe, müssten sie demnach 1944x2592 Pixel (also 3:4) haben. Haben sie aber nicht, sondern 1458x1944 Pixel (3:4).
    Ich verstehe nicht, warum das so abläuft, weil es ja nicht auf ein Standard-Fotoformat oder auf das Bildschirmformat zugeschnitten wird, sondern in genau dem Verhältnis vorliegt, in dem es vorliegen sollte, nur eben zugeschnitten.
    Kann mir da vielleicht jemand weiterhelfen?
    Danke,
    Florian

    Willkommen im Club! Das ist ein (im englischsprachigen Teil des Forums) gut dokumentierter Bug, für den es bisher keine Korrektur seitens Adobe gibt. Das Problem ist der von der Kamera automatisch gesetzte "Rotation"-Eintrag in den EXIF-Daten. Dieser wird von PSA zwar bei der Anzeige korrekt interpretiert, leider aber nicht beim Bearbeiten eines Bildes - daher verwechselt das Programm dann die schmale mit der breiten Seite ...
    Zur Vermeidung solcher Pixelverluste gibt es jedoch einen Trick: vor dem ersten Bearbeiten müssen die Portraitbilder in PSA einmal nach und links und wieder nach rechts gedreht werden. Dadurch wird dieses Rotation-Flag gelöscht und das Bild "echt" gedreht.
    Für die Bilder, die schon "beschnitten" sind, müßtest Du alle Bearbeitung wieder rückgängig machen ("Zurück zu Original"), die Bilder hin- und herdrehen und dann die Bearbeitungsschritte wiederholen ...
    Ärgerlich, aber wahr!
    (In PSE 3 wurde der Fehler übrigens behoben.)
    Alexander.
    1533 MHz, 1 GB, XP SP2, Canon Ixus 430 (aka S410), CanoScan D1250U2F, PSE v3.0, 3k images

  • A need to get photos of my baby from Adobe Photoshop Album Starter Edition 3.2 but I don't have a code so I cannot access in it. Somebody can help me, please?

    Two days ago I introduced photos of my baby into my PC and automatically went into the programm Adobe Photoshop Album Starter Edition 3.2. Then they were deleted of my photo camera. Then I wanted to access to the photos in the Adobe Photoshop Album Starter Edition 3.2 but I read that since the end of Juny we need a decodification code and that now it is not availabel. So I don't have this code and I need to access to the photos. Please, somebody can help me?. Thank you.

    Thank you for your help, Gunjan, but I have already tried to contact adobe tech support and I cannot get a code still now. I just find fixed issues where there is not shown my problem and I cannot find the way to write my question about my need of a code for Adobe Photoshop Album Starter Edition 3.2. Could you or somebody tell me the way to get the code through adobe.
    Thank you
    Mona05

  • Thumbnails in Photoshop Album SE & disconnected files

    I need to know what I did wrong to avoid this from happening again AND I'm hoping there's a solution out there for me.
    (Please note, I am DESPERATE and am trying to salvage deleted photos.)
    Here's what happened: Part I: Turning thumbnails into working images.
    1. I connect a digital camera card reader to my computer to "download" photos using Adobe Photoshop Album SE.
    2. This has always worked fine, and then I modify the pics, which creates a file that has the original file name with the word "edited" in it.
    3. Recently, I went through the same process of connecting my card reader via USB, and "downloading" all my files into Photoshop Album SE.
    4. As per usual, I choose the download & delete setting.
    5. I decided I would edit some of the photos at a later date.
    6. When I reopened Photoshop Album SE last night, all the pictures I THOUGHT I had downloaded said they were "disconnected" showing a file path to the card reader, drive e. I was totally shocked. The files ALWAYS downloaded to c:/documents and settings/[my user name]/my pictures/adobe
    7. So this time I can see all the thumbnails in the "view all" setting of Adobe Photoshop Album SE, but cannot get to any of the pictures. I get the "disconnected" popup.
    I suspect I am screwed but I'm hoping someone can help me.
    I clearly see all the thumbnails in the "view all". Is there ANY WAY the thumbnail images can be converted to real images? Where are the thumbnails stored that Photoshop can show them and say they need to be reconnected to the source which, in this case, Photoshop DELETED when "downloading"?
    Which brings us to Part II: What the hell happened?
    You'll notice I keep putting "downloading" in quotes. When I say, "Get all pictures" from my card reader, I thought all my pictures were being copied into the album. That's the way it's always worked previously.
    Why didn't it work this last time? Was it a memory issue? Does Photoshop Album SE have a limit on how many photos can be loaded into any one album?
    Is that why it "captured" the images but didn't really download them?
    Any, and I mean, ANY assistance anyone can give me with this would be greatly appreciated. These particular photos I really, really need and staring at those thumbnails, unable to do anything with them is maddening.
    Thanks,
    Deidre

    Hi Zona,
    Do you have "System Restore" set up in Windows? I've actually never used it,
    but it appears it MIGHT be a possibility if you did NOT store the images in
    My Documents or a subfolder of it.
    See the following:
    "System Restore protects your personal files by not restoring any files in
    the My Documents folder. It also does not restore any files that use common
    data file name extensions, such as .doc or .xls. If you're not sure whether
    your personal files use common data file name extensions, and you do not
    want the data files to be affected by System Restore, save them in the My
    Documents folder."
    There are applications that can take previous "HDD images" (residual
    signatures) so that you can possibly recover your images, but you would need
    to take this to a special vendor for this. If the images are precious, this
    might be your best option. Obviously it will cost some money but I know this
    can be done... I just can't advise you on the where's and how's. You would
    need to contact vendors in your location.
    Cheers

  • Ability to use Adobe Photoshop Album tags in CS3 Bridge

    I currently have 15,250 photos and 155 tags entered in Adobe Photoshop album. I would like the ability to convert, import or somehow use these tags in CS3 Bridge without reentering everything. PLEASE!

    I request the answer to the same question.

  • Adobe Photoshop Album 2.0, migrate to iPhoto?

    After 20 years owning PCs, I bought my first Mac. I have about 13,000 photos cataloged in Adobe Photoshop Album 2.0, but I'm having trouble figuring out how to preserve my organization in iPhoto (or even if it's possible).
    Photoshop Album uses an external database that permits hierarchies, like Places - MD_MontgomeryCo - Rockville eg. I probably have 30 or 40 counties, some with as many as 100 locations.
    I don't think keywords are quite the same, although organizing by album might help. I've downloaded Keyword Assistant from a Mr. Ferry iirc, and that makes keywords much more manageable. But I can't imagine tagging to create anything like my hierarchy of places.
    Any thoughts or experience?
    Oh, and how do you change the headings that seem to be automagically applied to each new batch of imported files?
    best, Jon Angel

    I have exactly the same problem - except I haven't got my new MacBook yet
    I have been doing some research, though, and the chances of getting the tagging out of PSA 2.0 seem very small ...
    However, I have found three theoretical possibilities.
    1) I have tried the first steps of this 'solution' without any success, but I will mention it anyway, perhaps you are more lucky: There is a PC based photo cataloging application called IMatch (http://www.photools.com/). For this application someone has created a set of scripts, the first of which is capable of extracting the PSA 2.0 catalog into a plain text file (http://www.impulseadventure.com/photo/flow-catalog-imatch.html). I have been unable to make this work, but if you succeed, a second script (mentioned on the above website) should be able to import the tags into IMatch. As I understand, IMatch is capable of embedding the tags as IPTC keywords in the image files. I guess you could use a free trial version of IMatch for this operation, and if you should get this far, it should be possible to import the IPTC keywords info into iPhoto with this script (http://scriptbuilders.net/files/iphotoiptckeywordimportexportutilities1.0.1.html). Well, this was all theory, but maybe it could be useful ...
    2) A second possibility is, that PSA 2.0 stores its caption in the EXIF Description field. Assuming you don't use the caption in PSA 2.0, you could go through your catalog one tag after another and write each tag into the captions of all the images, it is attached to. If it's possible to search in the EXIF Description feld in iPhoto, you could reverse the process when you have imported the images into iPhoto.
    3) Newer versions of PSA (called Photoshop Elements) exist for the Mac. I guess they must be able to import from older versions of PSA, but I don't know.
    I don't know if this is of any use, but I just wanted to share my own thougts of this process.

  • How do I get my videos to all work correctly in Photoshop Album Starter Edition Ver. 3.0?

    I have been using version 3.0 for the last 3 years and had no problems with any of my videos playing once they were downloaded from my mobile phone or camera to version 3.0 until August 2007 but now a lot of them say 'The selected file cannot be played'.  All the files that don't work are '.AVI' files and the only thing I can see they have in common is that in the file name it says -1x-1 next to the file size and length of the clip, whereas the working files have full numbers i.e. 640*480.  I still have a couple of files downloaded after August 2007 that do play but not many.  Is there any way I can change the settings or recover these files so they will actually play?

    It seems to me that these problematic files may not be .avi files, or are corrupted; it doesn't seem likley that it's a setting in Photoshop Album Starter Edition.
    Do any of those files play in Windows Media player? Another possibility could be that these files are sidecar files to your video files; are there similarly-named video files that work fine? If so, then I would suspect that these .avi files are, again, not .avi files, and could be simply text info that goes along with  your .avi files, and could be ignored (removed from the catalog).
    -Mark

Maybe you are looking for