Photoshop Lightroom 3.2 Import

Whenever I get to the import page to add photos I click on the drive I would like to import from, or Copy to Dng, Copy, etc. pretty much any of the options and the cursor in Windows 7 64 bit starts to spin and the whole application freezes for about a minute or so and it happens every time I go to import, whether it be internal or external hard drive, or SDHC card. I don't know how to avoid this it is annoying to have to wait for the application ot unfreeze to continue.

Ambaiman wrote:
... if I export them as TIFFs, do I lose any of the advantages of using NEFs...
Yes...nearly all of those advantages. TIFFs are "baked", NEFs are "raw". You can manipulate NEFs with changes like white balance and the method of demosaicing. You can't do that with TIFFs (or JPEGs) nearly as effectively.
Every raw converter (including the one in the camera) has its own settings and algorithms and those aren't directly transferable to another raw converter using different settings and algorithms.

Similar Messages

Troubleshoot installation problems in Photoshop Lightroom on Windows Vista

This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
A blank or flickering dialog box
A frozen cursor or screen
A blue screen
An unexpected restart
An error message such as:
"Setup is unable to load the installation script file."
"Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
"Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
You must be logged on as an administrator to perform some of the procedures in this document.
Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
In Windows Explorer, choose Organize > Folder And Search Options.
Click the View tab in the Folder Options dialog box.
In Advanced Settings, select Show Hidden Files And Folders.
Deselect Hide Extensions For Known File Types.
Click OK.
Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
Beginning troubleshooting
The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
Intel Pentium 4 or equivalent processor
Microsoft Windows XP, Windows Vista, Windows 7
768 MB of RAM (1 GB recommended)
1 GB of available hard-disk space
CD-ROM drive
In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
* Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
To delete files from a previous Adobe Photoshop Lightroom installation attempt:
Choose Start > Control Panels > Add or Remove Programs.
Select Adobe Photoshop Lightroom and choose to remove it.
Close the Add Or Remove Programs window and the Control Panel.
Open Windows Explorer.
If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
Empty the Recycle Bin.
Try to reinstall. If you cannot, continue with the next two sections in this step:
Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
3. Log in as Administrator before installingPhotoshopLightroom.
In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
4. Check the CD and CD-ROM drive.
Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
5. Install current Windows service packs and other updates.
Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
7.Re-create thePhotoshopLightroompreferences file.
Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
Quit Photoshop Lightroom.
Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
8.Install and run Photoshop Lightroom while no other applications are running.
Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
To disable startup items and non Microsoft services:
Quit all applications.
Choose Start, type msconfig in the Search text box, and press Enter.
Write down all unselected items under the Startup and Services tabs.
Click the General tab, and choose Selective Startup.
Click the Startup tab and select Disable All.
Click the Services tab and select Hide All Microsoft Services.
Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
Click Apply, and restart Windows for the changes to take effect.
Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
Right-click icons in the Notification Area and close or disable any startup items that are still active.
9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
To install Photoshop Lightroom to a different hard disk after disabling startup items:
Follow the steps in task 8 above to disable startup items.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
Intermediate troubleshooting
If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
10. Install and run Photoshop Lightroom in a new user account.
Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
11. Optimize handling of temporary files by Windows Vista.
Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
To manually delete temporary files:
Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
Quit all applications.
Choose Start and type %tmp% in the Search text box and press Enter.
Delete the contents of this folder.
Note the drive letter where this directory is located.
To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
Choose Start > My Computer.
Select the drive noted in step 4. Right click and select Properties.
Confirm the drive has at least 1 GB of free space.
12. Repair and defragment hard disks.
System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
13. Scan the system for viruses.
Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
14. Try to install Photoshop Lightroomon a different computer.
Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
Advanced Troubleshooting
If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
15. Log in using the built-in Administrator account.
The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
17. Check for problems with RAM modules.
Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
Change the order of the installed modules.
Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.

You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

Adobe Photoshop Lightroom has encountered a problem and needs to close. (ver 1.4.1)

I completed a search for this problem here and other forums, and found very useful information, however, I still need help. My laptop is an HP Pavillion dv1000, Intel Centrino, Windows XP, 1.24G of RAM; Camera is a Canon 5D, shooting JPEG only.
After a couple of weeks enjoying a vacation in the Caribbean, it was time to load all the new pics in the computer. I removed the card from my camera and using windows explorer, downloaded all pics in MyPictures folder. I created a new folder for this trip, and while I was there, I decided to reorganize several folders from previous trips. I renamed and moved folders around, deleted pictures, etc. (I believe that all the changes that I made created my problem.)
Once I finished all the changes with my folders, I launched Lightroom (ver 1.4.1) with the idea of synchronizing the folders and start working on my new pictures. After apx 8 seconds, I got the message: Adobe Photoshop Lightroom has encountered a problem and needs to close. We are sorry for the inconvenience.
After a google search, I found a lot of potential answers to my problem, including this one, which I tried:
"It might also be worth trying a temporary test catalog, just to see whether it's specific to that catalog. To do so, go to File menu > New Catalog and create a new catalog somewhere easy - Desktop perhaps - and just try importing a few photos into that test catalog and see if you can get it to freeze. I'm wondering if the catalog's been damaged slightly by that initial unexpected close, and if so, we'll see if we can get that sorted out for you."
I did exactly that (created a test catalog) and I don't get the error. I am not clear on what does that mean. Could you help me understand it? What do I need to do to use my old catalog? Is it damaged? How can I fix it? Did I loose all the work that I did in my previous pictures?
If I go back to my original catalog, I still get the error.
Thank you in advanced for your assistance.
Tony

Tony,
Here's something you might try:
Create a new, empty catalogue and try File->Import from catalog... and specify your broken one as input. With luck the damage will be left behind.
If that doesn't work, try deleting or renaming your preferences file. Look here for its location.
And if that doesn't work, try deleting or renaming your presets folder. See that same website for details.
Let us know how you make out.
Hal

Working with libraries/catalogs in Photoshop Lightroom

So, you have a question or two or three about Lightroom Libraries/Catalogs. Not to worry, Adobe have provided a TechNote , which is aimed at addressing questions such as:
Note: with the introduction of Lightroom version 1.1 Adobe have replaced the term "Library" with "Catalog"
1. How many files can I have in my library?
2. What is the largest photo size I can import into Photoshop Lightroom?
3. Can I have more than one library?
4. Can I store my library on a network drive?
5. How can I use my library on multiple computers, such as a laptop and a desktop?
6. How do I move photos from one library to another library?
7. How can I back up my library?
8. How can I transfer images from my hard disk to an external hard disk or to a CD/DVD when I run out of space? What happens to my library if I do this?

If you want to work on the frames of a movie in Photoshop, you have a few options. One is to render and export a composition from After Effects as an image sequence, and work on the frames as individual images in Photoshop. Another approach is tor ender and export the composition as a QuickTime movie and then import tha into Photoshop; this requires Photoshop Extended.
These options are covered in a bit more detail in "Working with After Effects and Photoshop".

I have bought adobe photoshop lightroom 5 (a product code card). My identity has been confirmed. How do I download and install the program?

Hello:
I have bought a student and teacher edition of Adobe photoshop Lightroom 5. My identity has been confirmed. But when I was about to install (i believe), there was problem with the password. I have requested for the reset of the password. Now how can I get into the screen for the download and installation of my program.
Thanks.
Hasan Imam

you can dl and install using the link below. (you may as well dl/install lr 5.7.)
but you need your serial number to activate it so you can use beyond the 30 day trial period.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Photoshop Lightroom 4.0

Geachte mevrouw of heer,
Ik heb een camera gekocht en daarbij heb ik voucher ontvangen waarmee ik de volledige versie van adobe photoshop lightroom 4.0 kan downloaden. Ik heb tevens een volgnummer.
Maar op jullie site kan ik Adobe Photoshop Lightroom 4.0 niet downloaden wat ik ook probeer. Ik heb zelfs een adobe ID maar wat ik probeer ondanks mijn legale volgnummer lukt het niet.
Ik moet wel Adobe Photoshop Lightroom 4 installeren omdat ik Windows Vista basis als besturingsysteem heb. Graag zou ik van jullie een werkbare oplossing willen ontvangen.
Bij voorbaat dank voor de moeite.
Met hartelijke groet,
Ad Graafmans
http://nl.pinterest.com/pin/create/extension/

    There are a couple of options for downloading Lightroom 4:
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5566
    PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5567
    The page linked below should also have links for Lightroom 4:
    http://prodesigntools.com/adobe-lightroom-4-is-out.html#ddl
    Be sure to follow instructions regarding signing in or else the downloads will not process properly. If you visit one of the other download pages in that site they have a section called "Note: Very Important Instructions" that gives specific steps for signing in.

Adobe Photoshop Lightroom 64-bit has stopped working

After opening LR 5.6 on Windows 8.1 and clicking Import it pops up a message, "Adobe Photoshop Lightroom 64-bit has stopped working". It worked yesterday.
How should I troubleshoot and fix this?
Thanks.

After opening Lightroom and clicking Import it pops up this message:
Upgraded to 5.7, same problem.
Please help me to fix this problem or to find other software for processing photos.

Why can't I open my RAW files in my trial version of Photoshop Lightroom 4?

Why can't I open my RAW files in my trial version of Photoshop Lightroom 4? I use a Canon 5d mark II, which is supposed to be supported, and I checked for updates, but none were found.

You cannot open files directly with Lr.
You have to import them.
Watch this tutorial video: http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-4/lightroom-4-imp orting-and-organizing-your-images/

Lightroom Crash on Import with CS3 installed

The last two days, I have been importing fairly large shoots from CF cards with Lightroom (Yesterday 147, today 79). In both cases I have received the Adobe Photoshop Lightroom has encountered a problem and needs to close.." message; twice today. I installed Photoshop CS3 Release yesterday and now I have Bridge trying to import the same set of photos. I noticed the Bridge import dialog today after LR crashed. By sending off the debug message and restarting LR I can finish the import eventualy. It shouldn't be this way and wasn't before I installed release CS3 (I had had LR and Beta CS3 on my machine with none of these problems.

Hi Holley,
Just back from a long weekend, hence the delay in replying..apologies.
Since I have now fixed the problem, I cant remember exactly how I sorted it, because I just stumbled through the various menus until I found the right solution! But, heres what I think I did:
Open TweakUI.
Open the drop down menu next to My Computer.
Click on Handlers.
In the window next to the menu, highlight Open folder to view files using Windows Explorer.
Click Edit.
Tick whichever boxes/tasks you would like to add to this folder. Obviously, the last one, Digital Images, will be one of them!
Click OK.
Thats it!
Note: There is no option to Take no Action. Once you have added any of the menu items, this option is added automatically by TweakUI.
Now, when you put a card in your card reader, the window should open with the option, Open folder to view files.
If this isnt working, reply and Ill try again.
HTH.
D.

Workflow for building Photo book Page in Photoshop & Lightroom

I am working on publishing a Photo Book using MyPublisher and will be laying out each page in Photoshop rather than using their templates.
I need advice on the best workflow for accomplishing this task--here are some details:
1. Images are Imported to Lightroom, are Flagged, and adjusted with Develop settings (Cropping, Basic Panel, Paintbrush etc.)
2. I do add some capture sharepening to the image in Lightroom (not much).
3. Use the EDIT IN Photoshop CS6 with 1 or more images from Lightroom as SMART OBJECTS.
4. In Photoshop, I am changing the Image Size (sometimes upsizing for full page spreads) and resolution (everything goes to 300 DPI).
5. Doing more intense Creative Sharpening for each image.
6. I am using a variety of custom actions to layout pages with 1, 2, or 3 images plus text. I create a new document that is sized for the entire page (11.08 x 14.08 @ 300dpi for Deluxe Hardcover). I fill the background page with a custom pattern simulating textured paper and then layout the images for either a Left or Right Hand page.
7. Saving page as a Photoshop File and re-importing into Lightroom
8. Publishing the Photoshop Files as JPEGS with Medium Sharpening for Glossy Paper
9. Importing the JPEG of the Page into My Publisher as a single image the sive of the entire page.

I often use Photoshop to set photos in iPhoto books. I am not sure how Apple does the trimming of its books, but I have had no problems with edge trimming of pages whose photographs to go to the edge. There is no white to be seen. I haven't closely compared the original 11" x 8.5" photo with the one in the book, but generally the results look right.
In terms of working out the gutter for two page spreads for a 11" x 8.5" book size. I measured an existing book and found the physical page width to be 11" exactly. I measured the gutter to be 0.25". So that means using Photoshop to create the image size of 10.75" x 8.5". It seems to work okay.
Just interested if you have set a gutter, and if so, to what specification?

Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5: EIZO CG 277 Coloredge o

HI,
Which of the two monitors do you recommend for Adobe Photoshop Lightroom 5:
EIZO CG 277 Coloredge or NEC PA-272W.
Thanks in advance for your reply.

It depends on where you are. Things are very different in Europe (Italy?) compared to the US situation.
The price difference between comparable NEC/Eizo models in Europe actually goes in Eizo's favor. The regular NEC PA272 in Europe cannot be hardware calibrated (it has a firmware lock) and the comparable offering would be either the NEC Spectraview 272 or the Spectraview Reference 272. These are more expensive than the Eizo CG277.
Note that the European PA272 can be hardware calibrated with the US Spectraview II software - but that software cannot be bought in Europe and has to be imported from the US.
All these displays are top reference quality. As for calibration software, which is a very important part in the equation, my vote goes to Eizo's ColorNavigator (I have a CG246). It is a superb piece of well thought-out software. The US Spectraview II - which I also happen to have - is a very, very close second, but the European Spectraview Profiler software that you get with the EU NEC units isn't all that impressive.
Photoshop supports a 10 bit display pipeline, with either display, as long as you have a video card that also supports it. Lightroom doesn't support it.

I purchased a new camera with an Adobe Photoshop Lightroom 5 disk. I have a windows pc with windows 8.1. I have downloaded and removed about 5 times. It says installed correctly but every time i hit the icon the pc freezes and I have to reboot HELP

I purchased a new camera with an Adobe Photoshop Lightroom 5 disk. I have a windows pc with windows 8.1. I have downloaded and removed about 5 times. It says installed correctly but every time i hit the icon the pc freezes and I have to reboot HELP

uninstall your lr 5.
install lr 5.7.1 and use your serial number to activate.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop Lightroom 2.3 Mac doesn't see Epson V500 scanner

Just installed all the drivers and software for my Epson Perfection v500 on my Mac running OSX 10.5.6 and Photoshop Lightroom 2.3 and the 'Import photos from device' option is greyed out - suggesting that Lightroom cannot detect the scanner.
The scanner is working fine via the Epson software, but that means scanning via this software and then seperately importing via Lightroom.
Any suggestions as to how to get the scanner detected by Lightroom?
Thanks
-Mark
http://www.ragorder.com
http://www.twitter.com/markstanley

Lightroom doesn't work that way. You can set up a watched folder and use auto import. http://bit.ly/md69L

FYI: Adobe Photoshop Lightroom Beta 4 is available

http://labs.adobe.com/technologies/lightroom/
Just downloaded it and will give it a look see...
Hey, don't get me wrong I love Aperture, but think it is important to see what the competition is offering. I doubt it will change my mind...

Heh, I just realized the name change...
*booming echo'y effect on*
----Adobe Photoshop Lightroom rroomm roooomm ooomm ommm
*booming echo'y effect off*
So then, this is the Lightroom of Photoshop?

Photoshop lightroom 3 Trial?

I have downloaded the Photoshop lightroom 3 30 day Trial. It seemed to go well, but as I finished and tried to inport a photo to play with- I am not familiar with it at all, but as I thought I could import a couple photos- it made a catalog of hundreds.... then said it had stopped working and would have to close.
After this, I have tried starting the program again and it tells me "Lightroom Opening Catalog:IMG_0749.JPG.ircat" -- It then says it 'has stopped working correctly. Windows will close the program and notify you if a solution is available"
I have uninstalled and reinstalled but the exact same thing happened.
Anyone else have this issue or know what to do to fix it? I have heard a lot of great things about this program & really wanted to try it.
I'm really frustrated & at this point, I'm glad it was just a trial & not a purchase:)
Thank you!
I am running vista by the way.

Trash the catalog named Lightroom Opening Catalog:IMG_0749.JPG.ircat

Photoshop Lightroom 3.2 Import

Similar Messages

Maybe you are looking for