Photoshop SDK - Plug In - Release Mode

Hello,
I'm building a Plug In for Photoshop using the CS6 SDK for Windows (64 Bit on Windows 7, VS 2010).
I'm using optimizations which only work in "Release Mode".
In your samples I have only "Debug" mode.
How can I move into release mode?
Thanks.
P.S.
I saw the Dissolve sample code has "Release Mode" which really enabled the optimizations and yieleded a much faster code.
The question is, how different it is from other samples, namely, How could I reconfigure other samples into "Release Mode".
Thanks.

In the Visual Studio Configration Manage you have to create an configuration, call it "Release" and make sure that the settings of the Debug configuration are copied to the new configuration. Then you have to change the several properties of the new Release configuration so that it outputs a release instead of a debug version, e.g. changing the run time library from "Multithreaded-Debug" to "Multithreaded" and deactivating the debug information generation. You also need to remove the DEBUG preprocessor definition in various places.
All in all, it is a complex process, so it is better if you have a project that contains both debug and relase configurations and you compare the properties of both. Then you can see which things are activated in one configuration and not in the other.

Similar Messages

  • Building AEGPs in Release mode

    Hello,
    Wanted to get some help with building AEGPs in release mode (Visual Studio 2005). The examples provided in the SDK have only Debug mode project configurations.
    Help?
    Thanks,
    Eran Kalmanson

    The varieties of what "Release" means to different developers, together with the constant sample maintenance headache of updating a configuration that's NEVER intended to see the light of day (you don't ship sample projects), led me to remove the release configurations from all SDK samples, years ago.
    I think Zac is planning to add at least one Release config to the SDK to get you started, but only you know what "Release" means to your users.

  • Can I get photoshop SDK?

    I want to use some function like photoshop for my own application.So, I need a photoshop SDK,not for plug-in.whether it is free or not.Can I get ?
    (Personal information removed)
    Thanks
    Message was edited by: Kendall Plant

    Hi,
    You should be able get one from here:
    http://www.adobe.com/devnet/photoshop/sdk.html
    Also, if have any quetions about creating plug-ins for photoshop you should post your questions in this forum:
    http://forums.adobe.com/community/photoshop/photoshop_sdk?view=discussions

  • Flash contents not loading in release mode

    hi ,
    I have a cocoa application that loads web page on a webview .When I run this application on release mode , is loading the page without Flash contents and displaying in console as shown below,
    2010-03-04 03:05:01.626 sampleforAlphaScreenWindow&chaneTextbackgroundcolor[930:10b] object 0x1064680 with 0 retain-count passed to CFMakeCollectable.
    2010-03-04 03:05:01.830 sampleforAlphaScreenWindow&chaneTextbackgroundcolor[930:10b] Error loading /Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player: dlopen(/Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, 262): no suitable image found. Did find:
    /Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player: GC capability mismatch
    but if I ran this same application in Debug mode , its loading the flash contents also on to webview.
    how can I load the flash contents of web page in release mode also.
    Any advices would be appreciated.
    thanks in advance.
    Akbar

    I would say that you declared the wrong type of IBOutlet or some other variable in your program. Posting here might give better results.
    In either case, I'd try to stay away from Flash. It's buggy at best.

  • My iphone5 is stuck on "plug into iTunes" mode

    my iPhone 5 is stuck on "plug into iTunes mode" and when i plug it in iTunes pops up with a message that says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." can i not restore it?

    Hello there, Brentsly9.
    If you've getting the "Connect to iTunes" screen, then the following Knowledge Base article offers up the best steps for resolving your issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use recovery mode
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    Plug the device's USB cable into your computer only.
    Hold down the device's Home button as you connect the USB cable to it.
    When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Adobe photoshop sdk download problem

    Dear Experts,
    Today I tried to download Adobe Photoshop SDK for window by creating an account on Adobe site. But once I login and try to download the relevant file ,it showed me page like "You are not autorised to view the page" or It won't redirect me to download page.I don't know whats the problem. Can't I download SDK free for personal use.
    Thanks & Regards
    Vikas

    Have you tried applying for permission? All I had to do was ask.
    Cheers.
    Glenn Chan
    http://www.colormancer.com/
    http://www.free-photoshop-plugins.com/
    http://colorcorrection.info/

  • Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

    Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
    Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
    Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

    From iPhoneWiki:
    Try changing the USB port (the back one of chassis is better) and restart computer.
    The installed version of iTunes may also be too old. Update iTunes.
    Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

  • Is there a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system.

    I was wondering if there is a way to open photoshop cs6 in 32-bit mode on a windows 7 64-bit system, because photoshop won't recognize the pen pressure on my graphics tablet (yiynova msp19u) I read that some users got it to work in 32-bit mode on macs, and all my other programs like zBrush, art rage, sketch book pro recognize the pen pressure on the tablet.

    well I am going to assume that the application marked photoshop is the 32-bit application, since the other on is marked 64-bit and I don't see one 32-bit. in any case it still not recognizing pen pressure and i have the newest drivers. The only thing I can think of now is that wacom drivers are interfering with it some how since they don't get along, although I was pretty sure i got rid of all wacom software.
    Sigh, it's starting to look like I have to format my computer

  • How do I open a raw image with the Photoshop raw plug in as opposed to the Bridge raw plug-in.

    I read in a book on adobe raw that it is often useful to open an image at the same time with the adobe camera raw bridge plug in and the Photoshop camera raw plug in.
    I can open a raw image in photoshop but I suspect I am not actually getting access to the camera raw plug in as none of the controls present in the bridge raw plug seem to be available from within Photoshop.
    Of course I can access bridge and the bridge raw plug in by opening bridge from within Photoshop but this is not what I want to do.  I would like to open the image using the photoshop raw plug in not the bridge plug in.
    Clueless . . . and confused.
    --Kenoli

    Thanks for the discussion.  It is interesting.  Let me clarify a bit regarding my issue.
    I am using Mountain Lion OSX on a mac, of course, and CS6.  I have been using Aperture, a piece of Apple Software similar to Light Room to organize my images, opening them from Aperture in Photoshop to edit them, as I am both familiar with Photoshop and like the way it does things better than Aperture.  I recently started using CS6 and working with Adobe Camera raw 7, which I think is the version that comes with CS6.  All the info I can get from the web site, including a very nice tutorial from Adobe on camera raw, simply tells me to open it from Bridge.  When I do this, I get a nice set of sliders and other adjustments specifically associated with Adobe Camera Raw and the camera I am using.
    I can open a file in Photoshop using the method SkillRooster suggests and, sure enough, it opens it with the camera raw plug-in (if I simply open the image by double clicking on it it opens in photoshop, no plug-in).  If I then go to bridge and open it from there, I don't get a second instance of Camera raw, it simply points me at the instance opened through Photoshop.
    However, when I open a raw image in Photoshop from Aperture  (raw images open with no problem) I simply get the Photoshop interface, not the camera raw plug-in, the same as if I had double clicked on the image to open it from outside of Aperture.  I am trying to figure out if there is some way to open an image from Aperture in Photoshop so that it opens in the camera raw plug-in.  One possibility I could imagene is to open it in Photoshop and from there open it in the plug-in.  The only thing I see regarding this in Photoshop is a menu item that lets me close the image and open Bridge, which doesn't help me with my Aperture issue.  I could decide to switch to bridge, but with the thousands of images I now have in Aperture, this would be quite a bit of work.  I may just have to work with both going forward.
    The root of my original question comes from something I recently read in a book by Bruce Fraser on Camera Raw which is excellent, but it focues on CS 5.5 as he died before being able to update it.  In that book he describes a trick he uses where he opens the raw image in a plug-in in Bridge and then opens it a second time using a plug-in in Photoshop.  This give him a chance to compare adjustments between the two open images.  As I mentioned above, when I try to do this by starting with Photoshop and then going to Bridge, it points me at the same instance.  I can't open it in Bridge and then Photoshop since once it is open in Bridge, it won't let me into Photoshop without closing the image in Bridge.  I was thinking there might be something in Fraser's method that would help me with my Aperture issue, but can't reproduce what he describes.
    Perhaps this was possible in CS5.5 but no longer  in CS6.
    Another work around I can imagine is to do all my raw editing from Bridge and then save the file as a DNG file in Aperture.  I suspect that after that, I am stuck with doing any more raw editing using the Aperture camera raw funcions, which are a bit lacking compared with Adobe Camera Raw.
    Hope I am being clear here about my dilemma.  Any help would be welcomed.
    --Kenoli

  • CVI fail to compile in release mode

    I am getting linker errors when I attempt to compile or build a project in the Release mode. In Debug mode the compile and build works fine. Any ideas?
    Dell E6410
    OS = XP
    not using Release64 or Debug64 yet...
    ChipB
    Solved!
    Go to Solution.
    Attachments:
    snap.jpg ‏27 KB

    Some Opperator error... Fixed but not sure what caused it.
    Cheers!
    ChipB

  • Code runs fine in debug mode but hangs when compiled in release mode

    I am struggling with the following problem. I have code which runs fine when it is executed in debug mode. However, when I compile it in release mode and run the executable, the code freezes and does not work. The code acquires images from a Hamamatsu camera. In the debug mode I am able to continuously acquire images. However, in the release version, the code hangs after acquiring the first image.
    I am using LabWindows/CVI version 7.
    I would greatly appreciate if I can get any help/suggestions in resolving this problem?
    Thanks!
    Regards,
    Sripad
    Solved!
    Go to Solution.

    Sripad:
    If you search this forum for "debug release crash" or "release version crash" or similar phrases, you'll find that this is a pretty common question.  Look through the other posts you find here to see if anything is applicable to you.
    The debug version does some things like padding variables so you can sometimes overrun your declared variable space without overwriting the next variable.  In the release, the variables are packed, so if you overrun one, you are overwriting another.  Just one possible difference.
    You can do some things in your release code to see where things get lost, like (temporarily using printf statements after multiple statements at the start and end of your loop to try to identify that failing line of code.
    Look through other threads to find other ideas.

  • Event receiver works perfectly in debug mode, but fails in release mode

    Here is my item added event which works perfectly and gives read permission to CCfield user in debug mode, but doesn't give permissions to CCfield user when item added event is triggered in release mode:
    base.ItemAdded(properties);
    try
    SPListItem item = properties.ListItem;
    string idnumber = Convert.ToString(properties.ListItem["ID"]);
    string itemurl = properties.ListItem.Url;
    SPWeb web = properties.Web;
    item.BreakRoleInheritance(false, false);
    //item.Update();
    string ccfield = Convert.ToString(properties.ListItem["EmailCc"]);
    string STRFirst = "<" ;
    string STRLast = ">";
    int Pos1 = ccfield.IndexOf(STRFirst) + STRFirst.Length;
    int Pos2 = ccfield.IndexOf(STRLast);
    string ccfield1 = ccfield.Substring(Pos1, Pos2 - Pos1);
    SPUser user = item.Web.EnsureUser(ccfield1);
    SPRoleAssignment roleAssignment = new SPRoleAssignment(user);
    roleAssignment.RoleDefinitionBindings.Add(web.RoleDefinitions["Read"]);
    item.RoleAssignments.Add(roleAssignment);
    catch (Exception e)
    throw;
    Any help?
    sk.Rakhishma

    Event receivers run using the permissions of the user who triggered the event. If your user does not have rights to manage permissions then you will need to run your security code with elevated permisisons.
    SPSecurity.RunWithElevatedPrivileges(delegate()
    { your code here } )
    Note that RunWithElevatedPermissions will not work with Sandbox code.
    Mike Smith TechTrainingNotes.blogspot.com
    my SP customization book

  • Project runs Ok in debug mode but not in release mode

    I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

    It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
    1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
    2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECC​EA4C4CC7DE86257038004D88AE?opendocument&node=13206​... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54​ADDA3DC33D86257038004E55E6?opendocument&node=13206​... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C​7FD41BF3D08625702E0072E294?opendocument&node=13206​...
    This should solve your problem.

  • Obj-C errors in a C   app in release mode

    I've made this c++ app that uses GLUT and OpenGL to display a square on the screen that you can move around with the arrow keys. I wanted to show my friend, so I compiled in release mode. Upon doing so, I got 1120 errors in various Obj-c headers that I don't import. I've never seen them before, and I'm pretty sure GLUT doesn't use them because I can compile in debug mode and have the app work just fine.
    Source code is here: http://dl.dropbox.com/u/2223161/OpenGL.zip
    Does anyone know why that's happening?

    While in Release build double click on the OpenGL target to get the Target Info panel.  Go to the Build tab, make sure the config is set to 'Release' and scroll down to the GCC Language section and remove '$(SYSTEM_LIBRARY_DIR)/Frameworks/AppKit.framework/Headers/AppKit.h' from the 'Prefix Header' setting leaving it blank. Rebuild.

  • Stateless Release mode and the Commit issue

    What are the implications of setting all the application modules to Stateless Release mode rather than Stateful?
    I’ve read the documentation about this, but I need hands on expert’s opinions
    Specially for a Web Application that a lot of public users will use?
    We have an issue of the way commit work, if we edit a page and then navigate without saving to another page and then save at this second page, the commit will save all changes that have been done in both pages, even of the two pages are bound to two different VOs and two different Application modules, it is really strange, it seems that I need to know that the user is leaving the page so I can rollback, I do not understand this default behavior of ADF/BC ..
    Any work around? Any opinions?

    Hi,
    the behavior is correct as it commits all pending changes. The release mode tells ADF BC how the application module is released to the pool if no longer needed by the user session. If release mode is stateful then the state of the current AM is passivated so it can be recovered. This has nothing to do with the page to page navigation.
    If you want to undo changes performed on a page when navigation off the page, you call refresh(Row.DB_ROW...) on the current row
    Frank

Maybe you are looking for