PHP on OSX talking to Oracle8i on WinNT

I'm trying to get an OSX server using PHP to talk to an Oracle DB on a
WinNT server (shoot me now for all the TLAs). The PHP documentation says I
need to install the Oracle8 Call Interface and Oracle8 client libraries.
Does anyone know where I would get this? I'm assuming that since they're
different server platforms I need to find the OSX variation of this
call-interface/library.
Any help would be much appreciated!!
emma
[email protected]

PHP is pre-installed on all Macs as part of the Apache
installation that is being run. However, to my knowledge it is the
legacy, and now unsupported, version 4.
I would recommend heading over to www.entropy.ch for the PHP
package that is there.
If you need mySQL to go along with it I recommend taking the
official route over to mySQL.com where they have an installer
package ready for all Macs.

Similar Messages

  • PHP on OSX

    Hi can any tell me how to enable php on a macbook pro running
    OSX so that I can preview my web pages in safari. Thanks

    PHP is pre-installed on all Macs as part of the Apache
    installation that is being run. However, to my knowledge it is the
    legacy, and now unsupported, version 4.
    I would recommend heading over to www.entropy.ch for the PHP
    package that is there.
    If you need mySQL to go along with it I recommend taking the
    official route over to mySQL.com where they have an installer
    package ready for all Macs.

  • Enable PHP on osX 10.4.10

    I'm a newbie so bear with me.
    I have an iMac osX 10.4.10
    I want to run Gallery 2 on the local server on my computer to set it up.
    I used MAMP. Easy. It shows green lights for Apache Server and MySQL server using PHP 5. Great!
    Now I need to Enable PHP. I found this:
    http://docs.info.apple.com/article.html?artnum=107292
    "For 10.3 or later
    Open Server Admin.
    Select the Web service from the desired server in the Computers & Services list.
    Click on Settings.
    Click Modules.
    Enable or disable the php4_module as desired.
    Save the changes.
    Restart the Web Service."
    I downloaded Server Admin and started it.
    My local address is http://myname.local/
    Server Admin says, "There is no server available at the address you entered.
    All services failed to access the address you provided for myname.local. Check the address and try to log on again or contact your network administrator.
    All I want to do is activate PHP...that's it!
    The directions in the above link are NOT for osX 10.4.10...So now what do I do?
    Thanks
    Tim

    Are you using Mac OS S Server?
    You posted in the Server forum. Server Admin is geared to managing Mac OS X Server and can't help you with the client version of the OS.
    To enable PHP on the client version of Mac OS X you're going to have to manually edit /etc/httpd/httpd.conf and uncomment the lines:
    LoadModule php4_module libexec/httpd/libphp4.so
    AddModule mod_php4.c

  • Can oracle 8.1.6SDK JDBC driver talk to Oracle8.0.5 db?

    Hi,
    Can Oracle 8.1.6SDK JDBC drivers (both thin and OCI) talk to
    Oracle database 8.0.5? My web server and database server sit on
    same machine. Can I have oracle 8.1.6 JDBC driver installed in
    same oracle home directory as oracle8.0.5?
    thanks and regards
    null

    Giorgio Malvestiti (guest) wrote:
    : Lai (guest) wrote:
    : : Hi,
    : : Can Oracle 8.1.6SDK JDBC drivers (both thin and OCI) talk to
    : : Oracle database 8.0.5? My web server and database server
    sit
    : on
    : : same machine. Can I have oracle 8.1.6 JDBC driver installed
    : in
    : : same oracle home directory as oracle8.0.5?
    : : thanks and regards
    : From the FAQ page :
    : Which JDBC drivers support which versions of Oracle database?
    : JDBC 8.0.4 drivers can talk to RDBMS 8.0.4 and 7.3.4.
    : JDBC 8.0.5 drivers can talk to RDBMS 8.0.5, 804 and 7.3.4.
    : JDBC 8.0.6 drivers can talk to RDBMS 8.0.6, 8.0.5, 8.0.4 and
    : 7.3.4.
    : JDBC 8.1.5 drivers can talk to RDBMS 8.1.5, 8.0.6, 8.0.5,
    8.0.4
    : and 7.3.4.
    : JDBC 8.1.6 drivers can talk to RDBMS 8.1.6, 8.1.5, 8.0.6,
    8.0.5,
    : 8.0.4 and 7.3.4.
    : regards
    : giorgio
    Bonjourno,
    What is the URL of this FAQ ? I could not find it.
    Does the above assertions also apply to the JDK 1.2 (thin)
    driver of Oracle 8.1.6 ?
    Otherwise, there is no way to use JDK 1.2 with Oracle 7.3.4.
    Thank you,
    Jean-Pierre
    null

  • How do I enable php in OSX 10.9.3

    I downloaded webserver and have a apache and mysql and the site is working when i connect but only the html pages, the php pages dont work and i noticed the webserver says PHP is disbaled how do I enable the PHP?

    Look here....
    http://support.apple.com/kb/PH15645

  • Flash and PHP Code Alter

    I have a php code that talks back to my flash movie on "post"
    however I have recently added a more advanced feature and need some
    help altering the code to work.
    Right now the code is as such and works great because the
    message var. is located in the root of the movie:
    $message = $subscribe_message;
    But now I need the script to look in a MC called "newsPop"
    for the message var. I used a code similair to flash as such but
    did not work.
    $newsPop.message = $subscribe_message;
    Can someone please help me alter the code to work and look in
    the MC for the Var - remeber this is PHP code.
    Thanks in advance!

    don't change your php script.
    you can change your flash so your movieclip checks the _root
    timeline for the variable or change the way you call your php
    script so the variable is defined on your movieclip's
    timeline.

  • Performance of O8 on WinNT vs. Linux vs. SCO?

    Hi,
    has anybody already compared the Performance of
    - Oracle8 on WinNT
    - Oracle8 on Linux
    - Oracle8 on SCO Unix
    when running on exactly the samehardware_ ?
    Can you give me some figures?
    Thanks.
    null

    Thomas Beckmann (guest) wrote:
    : Finnbogi Ragnar Ragnarsson (guest) wrote:
    : : Thomas Beckmann (guest) wrote:
    : : : Armin M. Warda (guest) wrote:
    : : : : Hi,
    : : : : has anybody already compared the Performance of
    : : : : - Oracle8 on WinNT
    : : : : - Oracle8 on Linux
    : : : : - Oracle8 on SCO Unix
    : : : : when running on exactly the samehardware_ ?
    : : : : Can you give me some figures?
    : : : : Thanks.
    : : : Hello,
    : : : i have installed a O8 on Linux and Windows NT on
    : : : exactly the same hardware.
    : : : It was a great surprise. NT was faster.
    : : : My first test: Create a Repository for sys.
    : : : Windows NT: 1 min. 20 s
    : : : Linux: 1 min. 40 s
    : : : Thomas
    : : Are you SURE that Linux properly recognized and used
    : : memory above 64MB?
    : : It is VERY common that people are using Linux, without
    : : using all memory. You have to state explicitly to the
    : : kernel how much memory the machine has, if it has more
    : : that 64MB. This is however changing with better code
    : : for calculating memory in the newest kernels.
    : My server has only 64MB memory.
    : I will continue my tests with more data, and more activity on
    : the database and I will optimize the installation on both
    : systems.
    : Thomas
    : Thomas
    These are good points, but for a definitive answer to questions
    of relative performance across O/S's, I think someone has to
    organize Transaction Processing Council's TPC-D and/or TPC-C
    benchmarks. Since the cost of the O/S, RDBMS and hardware are
    all considered in these tests they're of more use to the
    business community than raw performance comparisons. It would
    also put into perspective the cost impact of using Linux.
    Any takers?
    Dave.
    null

  • Authenticating user in JSF from PHP portal (Joomla)

    Hi there!
    Here, where I work, there's a portal in php (Joomla) where all users gets authenticated.
    I made an application using jsf and the protection to some pages, from anonymous access, is done by JSF Filters, but the users needs to login twice (Joomla and JSF).
    I need to avoid the redundant authentication.
    I found this solution: http://www.nuwanbando.com/?p=72, but modifying Joomla pages is not an option for me.
    Please, someone can comment about some possible solutions that I can use?
    Thank you in advance!
    Flávio Henrique

    There are many possible solutions, but you would need to figure out how to make the JSF pages secure by disabling authentication for the JSF pages. You could do this with some template that only displays the pages if something else is provided like some parameter passed to the JSF side, but that gets risky. Really what you are needing is single sign on feature that works between technologies. I would imagine you would really need some kind of federated authentication server that both PHP and JSF talk to and that both would share a single session id of some type. - Ponderator
    Edited by: Ponderator on Mar 20, 2009 1:45 PM

  • Php trouble

    I have two php/mysql sites up and running on my local computer. I'm in the middle of setting up another one, but keep getting the following error when trying to establish a connection using Dreamweaver:
    MySQL error #: 1045
    Access denied for user . . . (using password: YES)
    I checked to make sure the settings I'm using for the new site match the old sites. I then checked the old sites and sure enough, they're no longer working.
    Yet mysql and phpadmin are running without any errors.
    The only change on my laptop since the first two PHP sites were built have been system upgrades. I've just searched Macfixit and don't see anything about 10.4.7 breaking either mysql or php.
    Any ideas what's going on?
    david

    Do you administer mysql through the Terminal, or do you use MySQL Administrator? If you aren't using MySQL Administrator, that might make it easier to diagnose the problem.
    http://www.mysql.com/products/tools/administrator/
    I found this one fix for getting php and mysql talking to one another after upgrading to Mac OS X 10.4.4. Perhaps this will help in this instance too.
    http://www.macosxhints.com/article.php?story=20060111113313511&query=mysql
    PowerMac G5   Mac OS X (10.4.6)   1GB RAM, nvidia 6800 ultra, Apple 30" Cinema Display

  • Php and localhost disabbled

    Since installing Mavericks 'localhost' and php are disabled and web sharing is off. All I see is an ad for Virtual Host. I'm not interested in buying something when the installed apache and php has always worked flawlwssly. How come these settings got changed?

    Subsequent to the above problem I discovered PHP 5.4.17 provided in Mavericks does not have mcrypt installed. This is required by Wordpress  and other tools that authenticate users by a. Cryptographic login process.
    To remedy this problem see http://www.coolestguidesontheplanet.com/install-mcrypt-php-mac-osx-10-9-maverick s-development-server/ for a full recipe.

  • Droid pro on straight talk?

    ive read on various websites that you can take the sim card out of the nokia e71 smartphone and put it in any other gsm phone and use it on the straight talk service i wanna know is that possible to do and if so has anyone tried doing it if you have or no someone who has any help will be much appreciated...

    This is a board for discussing Nokia phones, not really wireless carriers and not Android phones.  But there are plenty of other boards where you can get answers.  I suggest re-posting your question here: http://www.howardforums.com/forumdisplay.php/551-Straight-Talk .

  • Cannot install Formsreports6i with Oracle8i?

    Hi,
    I have Oracle8i 8.1.7 installed and running well. Now,, I try to install FormsReports6i. However, I got message: "The location is already used as an Oracle home for Oracle 817 product. It cannot be used as Oracle home for 'nt'". If I select different location, then I have two kinds of service: OracleHome81 and OracleHomeNT, and they cannot run at the same time. When I was using old version (Oracle 8, 8.0.6) it did not have this problem. Any suggestion?
    Thanks!
    H.

    Thanks! However, I could not find Net8 Easy Configure. On another system that has Oracle8 (not Oracle8i 8.1.7) I did find Net8 Easy Configure which has "Add new service". On this Oracle8i I found only Net8 Configure Assistant, which does not provide "Add new service". Are you talking about Oracle8? I need to get a version of Oracle Developer compatible with Oracle8i (8.1.7).
    Thanks!
    H.

  • PHP as CGI (Shell-CGI)

    Hi Everybody,
    I am new to Web Servers and as a Java Developer I have decided to start
    with Sun ONE Web Server 6.1SP1. Till now I have been able to configure
    Servlet and JSPs' but not been able to configure PHP. As Zend enabler is
    not free I had to look for alternatives and then I found one in the PHP.net
    site, which is as follows:
    Copy the php files on your server
    Get the php zip file http://www.php.net/
    Edit php.ini-dist
    rename php.ini-dist to php.ini
    Edit php.ini : Indicate in which directory you have copied youre php files. (extension_dir = d:\php4\extensions ; directory in which the loadable extensions (modules) reside.)
    copy php.ini in youre windows directory (c:\winnt)
    Make a file association under Windows NT
    In a DOS Window (do not copy this two lines in a batch file! because of %1), type assoc .php=PHPScript
    ftype PHPScript=d:\php4\php.exe %1 %*
    2nd step : Configuring Netscape Enterprise Server for PHP
    Specifying shell-CGI as Filetype
    Due to a bug of the Nestcape/iPlanet administration console,
    you have to create a dummy shell-cgi directory (for ex:/dummy maps c:/temp)
    Remove it just after, (it will create 4 lines in obj.conf)
    If you don't do that you will get (no way to service request in the netscape error log)
    First Activate CGI as a file type
    From the Server Manager of NES 3.6.x, choose Programs|CGI File Type and Set the Radio Group to 'YES'
    Click here for screenshot
    From the Server Manager of NES 3.6.x, choose Server Preferences|MIME Types.
    On the MIME Types page, add a new MIME type.
    Set the Type field to type, and the content type to magnus-internal/shellcgi
    In the File Suffix field, enter php Click here for screenshot
    Test the 2nd step
    Put the test.php file in the document root of your server
    Then type http://server/test.php
    If you can see "nothing to write" in your browser then it works!
    But after doing all these works yet PHP program does not work. I am using Windows XP &
    PHP 4.3.4. My queries are:
    1. Is it possible to configure Sun ONE Web Server in this way?
    2. If so then what went wrong?
    3. If not then someone please tell how it can be done?
    Waiting for the reply and THANKS in advance for your assistance.

    I am also getting the same log when I am configuring php on sun one webserver 6.1 sp8 as CGI.
    But as for fastcgi I am getting the below log
    [10/Aug/2007:14:26:32] info ( 2656): CORE1116: Sun ONE Web Server 6.1SP8 B06/14/2007 11:35 [10/Aug/2007:14:26:32] info ( 2656): FCGI1000: Sun ONE Web Server 6.1SP5 FastCGI NSAPI Plugin B06/29/2005 06:03 [10/Aug/2007:14:26:32] info ( 2656): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_06] from [Sun Microsystems Inc.] [10/Aug/2007:14:26:32] info ( 2656): WEB0100: Loading web module in virtual server [https-cgi.com] at [search] [10/Aug/2007:14:26:34] info ( 2656): HTTP3072: [LS ls1] http://dev1:7001 ready to accept requests [10/Aug/2007:14:26:34] info ( 2656): CORE3274: successful server startup
    [10/Aug/2007:15:05:24] warning ( 2656): for host 10.129.149.193 trying to GET /fcgi/php, send-file reports: HTTP4142: can't find C:/Sun/WebServer6.1/docs/fcgi/php (File not found)
    ============
    fcgi/php is the uri configured in obj.conf file
    but I am not able to execute php,if any body knows execution,please help me
    Thanks in advance

  • Running SQL*Plus

    Hello:
    I installed Oracle8i on WINNT 4 workstation standalone, that is I am not connected to any server in any way. When I log on to use SQL*Plus I enter internal as username and oracle as password. Host string is left blank since I am not connected to any database. I create table without any syntax errors. But Tables are not being created. I kept getting errors that Oracel is not available: Error 00134. Now, is this because I dont have a host string as requyired by log on window? If I install the default Oracle database that came with CD rom, what will my host string be?
    I need to use SQL*Plus for Oracle class I am taking. Any help will be appreciated.
    Thanks. Tunji

    There are lots of steps in installign the Oracle..and they are operating system dependent.
    This kind of problem is very commen and has lots of Answers here is what I think you should start working on first...
    Step 1. Check whether you have network card and Network adapter software installed.
    Step 2. If installed then give your machine come TCP/IP address and configure the SQL*Net
    using the Net confiiguration wizard
    Step 3. If you don't have network card installed then probably you won't be able to configure it for SQL*Net what you can try is configuring the ODBC. You can install it if one is not installed.
    This is just the the preface of configuring the SQL*Net the network software which oracle uses, the detail you can find in the CD under the topic of configuring SQL*Net.
    I hope you find the solution. Talk to your instructors for that.
    Good Luck
    Kapil

  • Https (secure connection) on local testing server??

    Hi all
    I am building a shopping cart, which will use an https
    connection.
    Is there a way to setup an https connection on my local
    testing server (Apache, PHP, Mac OSX)?
    My guess is that it's not possible, but I might not know some
    special trick...?
    seb ( [email protected])
    http://webtrans1.com | high-end web
    design
    An Ingenious WebSite Builder:
    http://sitelander.com

    > UPS tools that will only accept POST data coming from an
    https page
    Oh - I see. I think this will be hard to do. You'd need to
    get a local
    certificate and all - not sure how to go about that....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "(_seb_)" <[email protected]> wrote in message
    news:ev39uo$pm3$[email protected]..
    > Murray *ACE* wrote:
    >> Why do you want to do this?
    >>
    >
    > to test locally?... I've been able to test everything
    locally so far on my
    > virtual testing server, and thought it'd be nice if I
    could test the
    > shopping cart locally as well. But it uses third party
    UPS tools that will
    > only accept POST data coming from an https page.
    > And yes, I'm pretty sure it's a stupid idea... But as I
    said, maybe
    > there's a trick I'm not aware of...
    >
    > --
    > seb ( [email protected])
    >
    http://webtrans1.com | high-end web
    design
    >
    > An Ingenious WebSite Builder:
    http://sitelander.com

Maybe you are looking for