PHP tag insight?

Hi!
Is there a way to implement PHP tag insight? So it works like
context sensetive? like when you write html.

yep, look here
http://www.wilk4.com/asp4hs/php4hs.htm#ee

Similar Messages

Non-closing PHP tags in includes?

Hi,
This post is directly targetted at David Powers, who is often here (but, of course, could interest others)...
I'm currently reading the book "Adobe Dreamweaver CS5 with PHP Training From The Source" and I just came accross a strange affirmation:
on page 184, in the "Why the Next Page Doesn't Always Load" sidebar, in the third bullet you state: "If the include file contains only PHP code, remove the closing PHP tag. This is not only legitimate, it's the recommended best practice."... jaw dropping... I've never seen that...
I need more explanations... Why would it be recommended? Wouldn't it break the code (particularly PHP) since there's an opening tag but not a closing one? That means that we could have a lot of opening tags without closing tags? Why would it be different from the code that is "inside" the page, for as far as I know it, includes "include" the code into the page "before running it"? So, doesn't PHP "sees" the same thing whether the code is "embed" in the page or included via the include statement?
Lot of questions, but I need more details, 'cause I'm not sure a Google research on that topic would give me any results...
Nelson

Nate has already given you the explanation. If you want the chapter and verse, take a look at the following page in the PHP Manual: http://docs.php.net/manual/en/language.basic-syntax.instruction-separation.php. It says in part:
"The closing tag of a PHP block at the end of a file is optional, and in some cases omitting it is helpful when using include() or require(), so unwanted whitespace will not occur at the end of files, and you will still be able to add headers to the response later. It is also handy if you use output buffering, and would not like to see added unwanted whitespace at the end of the parts generated by the included files."
The Zend Framework Coding Standard for PHP goes much further on the the following page: http://framework.zend.com/manual/en/coding-standard.php-file-formatting.html
"For files that contain only PHP code, the closing tag ("?>") is never permitted. It is not required by PHP and omitting it prevents the accidental injection of trailing white space into the response."
The "never permitted" applies only to files being submitted to the Zend Framework.
If anything comes after the PHP code in a file, you must use the closing tag. It's only when the file ends with PHP that you can omit it.

Php tags disappeared

Hi,
I've updated my machintosh from leopard to snow leopard os.
Now I'm trying to use dreamweaver cs4 and from the code view, the php tags didn't appear.
<?php and ?> tags aren't showed.
If I digit <?php at the end the tag disappears.
It's a strange behavior, I didn't find any option regarding to hide/show php tags.
Please may you help me?
Many thanks
Regards
Max

dreamweaver cs4, snowleopard 10.6.7.
If i write the following code
<?php after digiting the last 'p' char, <?php disappears
so <?php echo "hello world"; ?> appears as echo "hello world";
But if I opened the file with any text editor, the file is correct.
but I just discovered that it happens only with existing files.
For e.g. if I create a new file, no issue on php tag
Only on existing file. But I cannot re-write all.
Issue on file econdig?

Disable ICE tag-insight

Hello, just wondering how I can disable this new in-content
editing thing for ALL tag-insights, and maybe at the same time Spry
also?
Never really had a big problem with the Spry insight, just
now Ice is comming up a LOT more often then Spry used to and its
bugging me to death, thank you
*edit*
Sorry! I should have mentioned this question is for CS4,
thanks again

It looks like the ability to disable this in CS5 has been intentionally removed.
It appears that Adobe has hard-coded these attributes rather than place them in the editable code-hinting files.
FYI Adobe, our team is staying on CS4 until this is resolved in CS5. My primary role is writing HTML and CSS and in the average day I type the id attribute dozens of times. Having the go back and correct the code-hinting wastes valuable time and poses a significant usability problem to me and my team.
In the future, please don't sacrifice usability to push features/products. It reflects poorly on Adobe and has cause us to consider alternatives.

Understanding PHP tags - ?php perch_content('News headline 1'); ?

OK ,
thanks to everyone for the help and advice on getting php running. worked a treat.
Can anyone answer or point me in the right direction for a couple of php basics.
I have inserted the above php into a section of my page, i then changed the index.html to index.php (now changed back)
Everything after the inserted <?php.........?> dissapeared.
what are the need to know basics for inserting PHP within a page constructed using html? end tags??
please advise

Hi,
Looks to me like the php function you're calling to isn't there or gets stuck somehow, that's where the server gets stuck in the process and can't render the rest of the page.
www.w3schools.com has verry good tutorials on php.
I think the solution is that you have to include a php file somewhere in the page (the file that your php-call calls to) with a php include <?php include("yourpage.php"); ?>

Tag insight and closing tags problem

I am a touch-typist, and as such, CF-Builder has a very irritating problem. Let me explain:
One of the nice things about CFEclipse is that it senses when you have entered a closing element (i.e., #, }, ], ", etc.) When this occurs, it automatically moves the cursor forward WITHOUT leaving a duplicate. The fact that builder does NOT do this is very frustrating. It requires you to remove hands from the keyboard to hit the right-arrow, or you have to turn off the closing tags in the preferences.
Other than that, seems like a pretty decent editor.

I couldn't agree more. It's the little things that matter...

DW CS5 - PHP in HTML file - no display in DW live view

Have DW CS5, Local IIS 7 (Win 7 64x) testing server (Server Model: PHP MySQL) set up and working. External browsers render .html files with PHP fine (URL=http://localhost/testphp.html), DW Live View will not parse/display the PHP with ".html" extension. No ".htaccess" file, DW PHP Tag Library has all PHP "Used In:" boxes checked. Example:
Example 1
File name: testphp.php
<html>
<body>
<h1>Hello There</h1>
<script language="php">
echo "Hello World";
</script>
</body>
</html>
DW Live View and external browser URL: http://localhost/testphp.php:
Hello There
Hello World
Example 2
File name: testphp.html (same content as above, just filename extension changed)
<html>
<body>
<h1>Hello There</h1>
<script language="php">
echo "Hello World";
</script>
</body>
</html>
DW Live View:
Hello There
external browser URL: http://localhost/testphp.html:
Hello There
Hello World
How to configure DW CS5 to display PHP in DW Live View with file extension= ".html"?
Thanks in advance, have spent 2 days trying to accomplish!
Steve

File name: testphp.php
<html>
<body>
<h1>Hello There</h1>
<script language="php">
echo "Hello World";
</script>
</body>
</html>
This is not PHP code
The red code part should read as to be classified as PHP script
<?php echo "Hello World"; ?>
File name: testphp.html (same content as above, just filename extension changed)
<html>
<body>
<h1>Hello There</h1>
<script language="php">
echo "Hello World";
</script>
</body>
</html>
Apart from the same mistake as above, this file will not be recognised as containing PHP without the PHP extension. You can setup the server to accept HTML and to interpret same as PHP, but I would not recommend this.
DW Live View:
Hello There
external browser URL: http://localhost/testphp.html:
Hello There
This is amazing! With the code above? If you hadn't told me I would not have believed it. I tried it on my humble setup and you are correct. It works using the PHP file but not the HTML file. It doesn't matter, it is still not correct.
How to configure DW CS5 to display PHP in DW Live View with file extension= ".html"?
It is not up to DW to determine, it is the PHP server that determines whether PHP in an HTML file will be shown. Have a look here http://php.about.com/od/advancedphp/p/html_php.htm .Once again, I do not recommend this
I hope this helps.
Ben

Login php page not working in dw cs3

Hi!
I am new to php. I created a login (php5.2.5) page using
dreamweaver cs3 with mysql database. I have added
the login user server behaviour. When I preview, the login
page opens, i enter the username and password, but
the username and password is not validated and page not
redirected, remains as it is. I get the following error
in the localhost.error.log:
PHP Warning: Cannot modify header information - headers
already sent by (output started at C:\\Program
Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php:1) in C:\\Program
Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php on line 68,
referer:
http://localhost/main.php
The page worked fine before adding login server behaviour.
Here is the code from main.php(created thru dw cs3). mysql
database created thru phpmyadmin.
<?php virtual('/Connections/js.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_js, $js);
$query_jsrecord = "SELECT * FROM matrimony";
$jsrecord = mysql_query($query_jsrecord, $js) or
die(mysql_error());
$row_jsrecord = mysql_fetch_assoc($jsrecord);
$totalRows_jsrecord = mysql_num_rows($jsrecord);
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['profileid'])) {
$loginUsername=$_POST['profileid'];
$password=$_POST['password'];
$MM_fldUserAuthorization = "";
$MM_redirectLoginSuccess = "/jsdirectory.php";
$MM_redirectLoginFailed = "/errorlogin.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_js, $js);
$LoginRS__query=sprintf("SELECT profileid, password FROM
matrimony WHERE profileid=%s AND
password=%s",
GetSQLValueString($loginUsername, "text"),
GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $js) or
die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
$loginStrGroup = "";
//declare two session variables and assign them
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;
if (isset($_SESSION['PrevUrl']) && false) {
$MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
header("Location: " . $MM_redirectLoginSuccess );
else {
header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style></head>
<body>
<div id="main">
<div align="center">
<p> </p>
<form action="<?php echo $loginFormAction; ?>"
method="POST" name="jsloginform" id="jsloginform">
<table width="100" border="1">
<tr>
<td><label for="profileid">profile
id</label>
<input type="text" name="profileid" id="profileid"
/></td>
</tr>
<tr>
<td><label for="password">password</label>
<input type="password" name="password" id="password"
/></td>
</tr>
<tr>
<td><label for="submit"></label>
<input type="submit" name="submit" id="submit"
value="Submit" /></td>
</tr>
</table>
</form>
<p> </p>
</div>
</div>
</body>
</html>
<?php
mysql_free_result($jsrecord);
?>
Kindly help...

radhababu wrote:
> PHP Warning: Cannot modify header information - headers
already sent by
> (output started at C:\\Program
>
> Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php:1) in
> C:\\Program
>
> Files\\Apache Software
Foundation\\Apache2.2\\htdocs\\PHPCLI\\main.php on line
> 68, referer:
"Headers already sent" is a common problem encountered by PHP
beginners.
The DW Log In User server behavior uses the PHP header()
function to
redirect the page after checking the username and password.
There must
be no output to the browser before the call to header(). What
confuses
beginners is that "output" includes even a single space or
new line
character.
The error message suggests the problem is on line 68. Are you
using echo
or anything like that? If so, that's the cause of your
problem.
Another common cause is an extra line at the end of the
connections
file. Open Connections/js.php, and make sure there are no
extra lines
after the closing PHP tag. You can do this by looking at the
line
numbers. Click as far down on the page as you can, and use
backspace
until your cursor is directly to the right of the closing PHP
tag.
One other possible cause is the use of links relative to the
site root.
When you set that preference in your site definition,
Dreamweaver uses
virtual() to include the connections file like this:
> <?php virtual('/Connections/js.php'); ?>
Try changing that to this:
<?php require_once('Connections/js.php'); ?>
Make sure the relative path to the file is correct.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

PHP/MySQl/Apache

Dear All,
if I embed this within the body of my php page, <?php
getFileSize('cover.pdf') ?>, all is well and I get the
desired result.
However, if I embed the same text, <?php
getFileSize('cover.pdf') ?>, into
my MySQL database, I get absolutely nothing at all.
Have tried adding htmlentities, urlencode and other such
fabulous things,
but all to no avail.
Basically, my knowledge isn't good enough, but somehow MySQL
seems to be
disabling the function. I guess I need to 'escape' the code
in some manner?
Any clues?
Craig Sherwood

David and Joris,
your posts make fascinating reading - many thanks.
I guess the one thing to explain is why!
I have a database driven site. My users enter information
into the database
via an admin section.
In their text they need to be able to enter links to
PDF/doc/jpg files.
These links could be anywhere in the text, thus it can't be
limited to a
designated field.
However, when the site visitors look at a page, I wanted to
be able to show
them the file size, so that they don't download unnecessarily
large files by
accident.
Hence the need for my users to be able to enter the file name
in a bit of
code and have the relevant page show file size in amongst the
text.
Craig
"David Powers" <[email protected]> wrote in message
news:[email protected]...
> Craig wrote:
>> So then the obvious question surely is how do you
execute a piece of code
>> if the 'call' to the function is in a database
field?
>
> The answer is that you don't do it. There is a PHP
function eval(), which
> evaluates a string as code. To achieve the type of
result that you want,
> however, it involves storing your string in the database
as PHP code. Try
> this simple example using your human() function:
>
> $filesize = 12345;
> $string = '$size = human($filesize); echo "This is the
size: $size";';
> eval($string);
>
> This displays "This is the size: 12.1k".
>
> The question remains why on earth you would want to
store PHP code in a
> database simply for the purpose of running it in a PHP
script? It makes
> far more sense to embed the code in your main script.
More importantly,
> eval() is considered to be a serious security risk. A
common saying among
> PHP developers is "Eval() is evil".
>
>> After-all, html code can be put in a field, but
rendered as proper html
>> (such as links for example) without the html code
(<a href etc) being
>> displayed.
>
> HTML is just plain text, which is interpreted by the
browser by referring
> to the text/html MIME type in the header. PHP needs to
be executed on the
> server before the output is sent to the browser. The
opening and closing
> PHP tags in a text field retrieved from a database are
treated as text in
> the same way as a PHP variable is treated as text when
included in single
> quotes. The only way to execute code stored in a
database is to use
> eval(), which has serious drawbacks.
>
>> FYI: The 'human' function displays either 'kb' or
'm' depending on the
>> file size and executes perfectly.
>
> Yes, after studying it more carefully, I have finally
worked out how it
> functions. It uses a for loop in a rather unconventional
way, which is
> what confused me. It also converts bytes to Gigabytes.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

How to enable PDO_MYSQL in 5.2.4 PHP included into Leopard

I get it all working but getting an error:
uncaught exception 'PDOException' with message 'could not find driver'.
It looks like there is no PDO-MYSQL in phpinfo configuration list.
On dreamhost (and on my old tiger):
PDO support enabled
PDO drivers sqlite2, sqlite, mysql
pdo_mysql
PDO Driver for MySQL, client library version 5.0.16
on Leopard:
PDO
PDO support enabled
PDO drivers sqlite2, sqlite
Thanks,
V.

I have managed to get PDO with MySQL support.
I installed the latest Marc Liyanage Beta from here:
http://www.entropy.ch/phpbb2/viewtopic.php?t=2945&sid=b820e5e830c0f1d8712f31b28b 832dc0
sudo mv /usr/local/php5 ~/Desktop/php5.old
curl -O http://www2.entropy.ch/download/php5-5.2.5-6-beta.tar.gz
tar -xzf php5-*-beta.tar.gz
sudo mv php5 /usr/local/
sudo chown -R root:admin /usr/local/php5
sudo ln -sf /usr/local/php5/entropy-php.conf /etc/apache2/other/+entropy-php.conf
then comment the existing php module in httpd.conf
#LoadModule php5_module libexec/apache2/libphp5.so
the entropy build adds a conf to 'other' if you install it as above, that loads the module from the /usr/local/php5 directory
(I did it this way so future upgrades are easier and the built in php remains untouched)
enable the php.ini in /usr/local/php5/lib/
edit the msyql socket connections there.
mysql.default_socket = /var/mysql/mysql.sock
(because I'd previously followed these instructions: http://www.procata.com/blog/archives/2007/10/28/working-with-php-5-in-mac-os-x-1 05/)
restart Apache
*watch out for short php tags* - they're disabled in this php build.
the final workaround I had to do for PDO to work properly was to include the socket in the connection string:
new PDO("mysql:host=localhost;dbname=test;unixsocket=/path/to/socket/found_in_php.ini_ormy.cnf",'username','password');
I now have a working PHP installation with support for PDO and a bunch of other libraries on OSX 10.5.3 on a Mac Pro (2x2.66 Dual-Core)
Hope this helps someone (and I didn't leave out any steps)

Integrating PHP into WAS

I had someone ask me the question about integrating PHP into WAS in order to embed PHP tags into a BSP page for example.
Now I personally don't see a lot of need for this but I wanted to see what everyone else thought.

Hi,
My initial thought would be typical stuff like:
- regex, but that should be solved in WebAs 7
- ascii code manipulation, like mentioned in /people/eddy.declercq/blog/2005/10/28/secretum-secretorum, but Christian Hansen mentioned that cl_abap_conv_in_ce=>uccpi( i ) will do the trick
So what's left?
- arrays, gosh I miss that a lot.
- proper file manipulation; when I need something, I always got to the OS
- real functions, FMs and (PER)FORMs are not as functional, certainly not when it comes to varibale scopes, etc
- graphics and simular stuff. It would be much easier if I could generate captchas (see also /people/eddy.declercq/blog/2005/09/13/die-mensch-maschine) directly in BSPs.
Eddy

How html textfield use i jsp tag

hi master
sir see my php code i get input in name and fname text box and pass in php tag for insertion into database
<html>
<body>
<form action="mfa.php" method="post">
First Name<input type="text" name="fname">
Second Name<input type="text" name="lname">
<input type="submit" name"Insert">
</form>
<?php
//Inserting records into database
$firstname=$_POST['fname'];
$lastname=$_POST['lname'];
mysql_connect("localhost","root","") or die(mysql_error());
mysql_select_db("test1");
mysql_query("INSERT INTO persons (Firstname, Lastname) VALUES ('$firstname','$lastname')");
echo "Data Inserted";
?>
<?php
//showing resutls in browser
mysql_connect("localhost", "root", "") or die(mysql_error());
mysql_select_db("test1") or die(mysql_error());
$result = mysql_query("SELECT * FROM persons") or die(mysql_error());
echo "<table border='1'>
<tr>
<th>First Name</th>
<th>Last Name</th>
</tr>";
while($row = mysql_fetch_array( $result ))
echo "<tr>";
echo "<td>" . $row['Firstname'] . "</td>";
echo "<td>" . $row['Lastname'] . "</td>";
echo "</tr>";
echo "</table>";
?>
</body>
</html>
how i use html text box and pass to jsp tag for insertion data into database
please give me sample code
thank's
aamir

I have never had any problems mixing straight HTML (without the verbatim tag) and JSF tags. OTOH, I use facelets, not JSPs, so my experience may not be applicable.

Send PHP/MySQL results to popup window as HTML

Hi all,
Not even sure if this can be done, but I have a Results.php page that includes a line:
"My task, [<?php echo $row_Recordset1['Task'];?>], is in the top [<?php echo $row_Recordset1['RankPercent']; ?>] of tasks in the company";
...where the php tags represent results from a MySQL search.
How do I send this as html to a mini-popup window so that the people can send it to their friends on facebook/twitter/etc?
NOTE: the issue here isn't in creating a popup page - I can do this.
What I need to be able to do is pass that sentence to the popup.php page "exactly" as it appears on the page when rendered.
I have been experimenting down the...
$text = "My task, [<?php echo $row_Recordset1['Task'];?>], is in the top [<?php echo $row_Recordset1['RankPercent']; ?>] of tasks in the company";
...route, but this just gives a load of parse errors (predicably enough).
Any thoughts?

Actually, that's pretty good! There is a slight syntax error - the first <?php doesn't seem to render properly (in fact, the second one looks good until you take the first one out, and then it develops the same problem as the first one did...). Any cloues?
If not, don't worry - I'm sure I can debug it from here, but if you can think of anything I'd love to hear it. It seems to be something to do with the double quotes...

How do I prevent Security Updates from overwriting (custom) PHP install?

Hi,
I've been forced into re-installing PHP from binaries after every Apple Security Update that upgrades PHP and I'm over it. Everytime Apple upgrades PHP, "their" compile overwrites mine and I lose my libraries. I have to completely wipe the Apple PHP install and re-compile. I've done this 3 or 4 times now in the past couple years...
Is there any way to force the Security Updates to retain the install of "my" libraries? What about the update installer(s)? Where are they?
12" PB 1.25 Mac OS X (10.3.9)

An Update shouldn't affect PHP, this is a server side language that is stored on the server for the implamintation of Dynamic Web Pages.
Self-referentially short for PHP: Hypertext Preprocessor, an open source, server-side, HTML embedded scripting language used to create dynamic Web pages.
In an HTML document, PHP script (similar syntax to that of Perl or C ) is enclosed within special PHP tags. Because PHP is embedded within tags, the author can jump between HTML and PHP (similar to ASP and Cold Fusion) instead of having to rely on heavy amounts of code to output HTML. And, because PHP is executed on the server, the client cannot view the PHP code.
PHP can perform any task that any CGI program can do, but its strength lies in its compatibility with many types of databases. Also, PHP can talk across networks using IMAP, SNMP, NNTP, POP3, or HTTP.
PHP was created sometime in 1994 by Rasmus Lerdorf. During mid 1997, PHP development entered the hands of other contributors. Two of them, Zeev Suraski and Andi Gutmans, rewrote the parser from scratch to create PHP version 3 (PHP3).
Don

All new php code now sends the header already sent warning

I have had none of these 'headers already sent....' problems
creating php forms in the past with dreamweaver cs3 (on leopard).
Now, every single php form generated using dreamweaver returns this
warning - without fail. I copied the EXACT code from a working
login form into a new page.....the new page, using the same include
file is now returning the warning: I am pasting the code that
works, and below that, the code that does not work. Even Developer
Toolkit, on the rare occasion it doesn't cause DW to crash, seems
to be inserting code that does not work properly - same goes for
the insert > data objects.
I've attached the code from both pages - page that works at
the top, page that doesn't work at the bottom:

debrankin55 wrote:
> I have had none of these 'headers already sent....'
problems creating php forms
> in the past with dreamweaver cs3 (on leopard). Now,
every single php form
> generated using dreamweaver returns this warning -
without fail.
Select Modify > Page Properties, and check Title/Encoding.
Make sure
that Include Unicode Signature (BOM) is deselected.
If that doesn't do the trick, select View > Code View
Options > Hidden
Characters. Make sure there aren't any rogue characters
outside the PHP
tags, both in the affected page and any include file.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

PHP tag insight?

Similar Messages

Maybe you are looking for