PHP Type Hinting and Flex Issue

From the PHP docs, "PHP 5 introduces Type Hinting. Functions are now able to force parameters to be objects (by specifying the name of the class in the function prototype) or arrays (since PHP 5.1)." So i have a function that has a bunch of parameters setup with type hinting. When i use the connect to dataservice wizard everything works great, it even gets the objects hinted in the parameters and adds them to my flex DataObjects. Now if in flex if I create a new instance of this object, (var activeSync:DO_ActiveSyncServer= new DO_ActiveSyncServer();) and then pass it to my newly added data service i get the below error message.
Catchable fatal error: Argument 2 passed to SetupWizard::CreateSetup() must be an instance of DO_ActiveSyncServer, instance of stdClass given in SetupWizard.php on line 29
Anyone ever come across this issue before or know how to fix it? It would seem that Flex passes this stdClass type no matter what to PHP for complex objects.
Thanks

Similar Messages

Status of Hub 2.0 type A and B issues and fixes

I have recently had lots of telephony issues with a type A hub and BT sent me a replacement which was a type B. This fixed lots of telephony issues. I now find that there are some serious issues with the type B eg xbox 360 live probelms ( does not affect me) and an issue with the link dropping when you access the hub and look at advanced settings/broadband/adsl. Personally I think that one is pretty serious!!! I also think the event log is a bit mysterious in the type B.
Anyhow what i was wondering was does any of the more experienced forumistas or perhaps one of the moderators know if there is a list of issues for type A and B HH's and what the status is . That is --are BT going to fix it or not ? and perhaps when ?
Cheers

Hi Banz
I dont have that problem this end, reset the home hub with a pen in the side and see if that helps
cg
CG Over An Out

Account assignment for Movt type 101 and 501

All SAP Gurus,
We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
We are aware that the Transaction Key is 'GBB'.
But how to know that which 'General Modification' is used for which movement types.
(in short where we can find this link between movement types and Transaction Key and 'General Modification')
Regards,

To know this first you have to know what does the different general modifications means for GBB:
AUA: for order settlement
AUF: for goods receipts for orders (without account assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to vendor
VBR: for internal goods issues (for example, for cost center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type 501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
Then go and check OMWN.
Regards,
Indranil

Posting goods issue using Message type SHPCON and idoc type DELVRY03

Hi SAP Gurus,
I am using message type SHPCON and idoc type DELVRY01 with processing code DELV to post goods issue for a delivery note.
I tried to simulate the inbound entry via WE19. The scenario should be posting goods issue based on the delivery order.
In some cases, quantity issued is less than the quantity in the DO. For this, I need to change the delv quantity in the DO via VL02N before I select Post goods issue button. This will change at the same time post the goods issue.
What I have filled up are the fields:
E1EDL20-VBELN = DO num
E1EDL20-VSTEL = Plant
E1EDL18-QUALF = "PGI"
E1EDTH13-QUALF = "006"
E1EDTH13-NTANF = date today
E1EDL24-POSNR = 000010
E1EDL24-MATNR = material num
E1EDL24-WERKS = delv plant
E1EDL24-LGORT = sloc
E1EDL24-LFIMG = updated quantity
But everytime I simulate using WE19, the entire quantity in the DO is not changed at all. The goods issue quantity posted is still the original DO quantity.
May I know how to do this? Thanks.

Put value in E1EDL24-LGMNG for qty to pgi.

C3-01 Touch and Type Keypad Lock/Unlock Issue,,

I just bought this C3-01 touch and type phone and it got big issue of locking/unlocking key pad..
phone gets locked and even if I click on keylock button and then click unlock (on touch screen) then it never gets unlocked.. (I checked guide it says same thing)
how to resolve this issue? anyone had same issue?
Solved!
Go to Solution.

1st Of All, If u just got oyur Nokia C3-01 Device, then You must be having the old version of SOftware in it, maybe v05.68. So In that SW, You have to press the unlock, there is no swipe to unlock,
So, You can clearly see, there is a Button at the Right of your mobile below the Volume Buttons (Right If you Have your Device Screen Facing you, Left If you ahve the Back Battery Cover Facing You)
So Press that Button, you will see your display glow showing " UNLOCK " option in the middle, Press It.
It will get Unlock.
Also, after Unlocking, Before adding anything to Phone Memory (like contacts, messages,etc) make sure to update your Mobile FW/SW to the latest version out there (which is v06.05)
So, If you have a PC with internet connection, connect your Device with USB, and Use Nokia Software Updater (Or Nokia Ovi Suite, whatever you have got Installed In your PC) and Start Updating ASAP, Alot Of Bug Fixes have been Taken Place,
If Still Not Unlocked, RETURN YOUR DEVICE NOW, because your Device is Faulty.
If I Helped Press The Star Against My Name At the Left SiDe
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Snow Leopard, PHP, MySQL, Apache and Wordpress!

Hi there,
It's taken me most of the day to work this out, so I thought I should post about it somewhere and here, on the Apple forum, is the ideal location.
I'm a web developer and love the fact that my MacBook works out of the box with a Unix webserver and with little effort, I was able to set up PHP and MySQL on it. I was delighted to hear that the new Snow Leopard was shipping with the latest and greatest of both. It wasn't quite that easy when it came down to running my test sites, one of which I'm working on is a Wordpress site. Far from being daunting, the solutions to the problems I had were quite simple. The issues arose from the OS not having much exposure yet and not many people having posted their experiences on the web. It was just time consuming.
I should mention at this point that this does require some tinkering with Terminal, but not so much as to cause damage if you do something wrong.
First off Apache. Thankfully this is as stable as it always has been. All this requires to activate it is to visit System Preferences > Sharing and switch on Web sharing. Bish-bosh, job done.
Next off PHP. If you open a Safari window and run your phpinfo.php file (where ever you have it saved. If you don't, they're out there, it's a tiny piece of code which you can use to find out your current php setup). You'll find that everything is superb! PHP 5.3! Excellent! Hang on, scroll down to the date and time section. Whoa! What's this big fat warning here.
That warning my friend, has been the bane of my misery all day. Wordpress hates it. HATES IT! It causes no end of grief. So what's the multi step, multi program solution?
Open your php.ini file and add the line:
date.timezone=Country/City
(do a Google search for PHP Timezones and you will get the exact settings. It's not so good that it understands every city in the world. My setting was Europe/Dublin).
That's all. This will solve your issue of the timezone error everywhere. Stop and start Apache (System Preferences > Sharing, tick off and tick back on Web Sharing) and hey presto, error is gone.
Wait a minute, where the **** is my php.ini file. Unfortunately this is where you have to get your hands dirty. Your php.ini file is a system file which resides in the /etc/ folder. Open a terminal window and type exactly the following:
cd /etc/
cp php.ini.default php.ini
This makes the php.ini file from the default. This protects the original so if you ever need to create a new copy or if you make a mistake in the next steps, you can start again.
Next I'm going to tell you how to edit this file. This uses a program called vi (there are GUI editors out there that will save you this heartache, so if anyone knows any, please post in response. I think TextWrangler is one).
First you need to set the php.ini file so you can edit it. Type in exactly as follows:
sudo chmod 777 php.ini
Sudo is the superuser commmand. It may not be needed, but stick it in anyway. If you are asked for a password, put in your normal password (that you would be asked for say if you were installing something you downloaded).
At the next prompt, type in:
vi php.ini
This will open the php.ini file. Using the up and down keys, find a blank line in the file. You will notice that alot of the lines start with ';'. These are commented lines. Once you find a blank line, press 'i' to insert text. Your screen will now say '-- INSERT --' at the bottom in red. Type the following in exactly (you will NOT be able to cut and paste):
; Set PHP Default Timezone
date.timezone=Europe/Dublin
Substitute "Europ/Dublin" with your own timezone. When you are done, press escape. Now type in the following:
:wq!
The colon is important (not a typo on my part) as this tells vi you are going to run a command. You should now be back at your prompt. Now you need to reset the permissions on the file. Type the following:
sudo chmod 444 php.ini
And that's it. That's your PHP setup and finished. If you run your phpinfo.php file now, you should see your timezone under the date and time where you were getting the error before.
Now the MySQL. This is a bit of fun because, even though MySQL ships with the system, it's not exactly set up correctly! So once again into terminal.
This time go to the local directory:
cd /usr/local/
If you type in:
ls -al
You'll get a directory listing. This has the MySQL folder listed as mysql-5.0.77-osx10.5-x86 (or something! I did that from memory!). This IS the MySQL folder but if you, like me, had previously set the MySQL Preference Pane in your System Preferences, then it won't be able to access this. Type the following command:
sudo cp -R /usr/local/mysql* /usr/local/mysql
This should copy everything into a folder called mysql. It takes a couple of seconds (first time on my machine it was a good 20 seconds) to run so be patient. Now you need to do the following:
sudo chown mysql:mysql /usr/local/mysql
This sets the owner and group of the mysql files to 'mysql'. If you go back to your MySQL preference pane in System Preferences, you should now be able to start it (something weird about it makes it require to close and reopen the System Preferences window before it can open the MySQL pref pane. This is normal, just click ok).
The bit that got me here, is that I thought that my activation of the MySQL was actually a new install. I tried everything to change the root user and password for MySQL but in fact, if you had it installed on Leopard, prior to upgrading to Snow Leopard, all your users and passwords are the same. If you HAVEN'T installed it before, I recommend you read the Post Installation Customisation (section 2.3) on the manual for MySQL 5.1 on http://www.mysql.com
So that's about it. All that remains is to test Wordpress. I have phpmyadmin installed (I've heard CocoaMySQL is very good, like iTunes for db's so I'm gonna check that out later) and was able to create the new wordpress database. I changed the settings in the wp-configure.php file to match my setup but nothing worked. I changed the host from '127.0.0.1' back to 'localhost' (a common complaint of the wordpress setup) but no joy. Then I changed the host back to '127.0.0.1' and added the port :3306 (so the full host is '127.0.0.1:3306') and bingo, the install worked, my database setup and my test site worked.
So that's it! Many of you out there will say, why didn't you just use MAMP. I did use MAMP, but I also got the Timezone issues and it took far more tinkering and hacking to make it work. I decided that, as my lovely MacBook now running lovely Snow Leopard had the lovely newest versions of PHP and MySQL installed, I'd rather get them working than use a runaround with MAMP. I'm a happier camper for it.
I hope this helps some of you out there. I don't personally have a blog yet, but when I do, I'll post this up there for all to access. I may even add screen shots!!! But seriously, I hope this helps you all out with your installs. It's so handy to have all this stuff straightaway with Snow Leopard, it's just a matter of getting it to work.
All the best now,
T

Hmmmm... I did a clean drive install of Snow Leopard because I used to do it once a year with Windows and hadn't done it in 3 with my MBP.
First, my httpd.conf file had the line enabling PHP commented out, so when I went to see my simple file with phpinfo(), I saw the source. Saw your post, thought it was the timezone, fixed that (which will probably make wordpress happy when I get it running), and it still didn't work. Looked at the httpd.conf file, found that PHP was disabled by default, fixed that line, restarted the server, and my phpinfo() worked like a charm.
Also if you want to edit config files, I use TextWrangler's "open hidden files" option.
But... I have no /usr/local directory at all. Doesn't exist on my machine. Checked the options in the base install and MySQL isn't offered as an option. Checked the optional installs and MySQL isn't there. Even letting spotlight search for hidden files, the only files with MySQL in their name were from php scripts in my web folders.
There's some stuff about installing/compiling from source.
http://hivelogic.com/articles/compiling-mysql-on-snow-leopard/
Dunno if I want to go down that road quite yet.

Fed up with speed and connection issues since exch...

Last Monday BT done some upgrade work at our local exchange. From that point onwards we have had speed and connection issues.
I use a Belkin G Router rather that the Homehub some that we can run a printer through it and that is plugged in to telephone socket via an extension. But before we blame any of that we have gone back to the Homehub2 so we could see the difference and there is very little.
We live in the countrside so broadband speeds are not great in any case. About 1.8 mg I guess but we have always had no problems. It was good enough for us and we could watch Iplayer.
I was getting fed up with drop outs and speed and yestereday an Openreach guy came out tested everything could not find any problems apart from speed. He made some calls and was told our band width had been capped. He had that removed and yesterday evening speed was a bit better.
Today just as bad again.
Details from router:
Date/Time          January 25 2012 , 21 : 14 : 25
Version Info
Runtime Code version F5D7633-4Av1_UK_1.00.009
Boot Code Version          1.0.37-5.15
Hardware Version           V1.0J3
ADSL Modem Code Version        A2pB015c6
ADSL
Type
Status   No Defect
                Downstream      Upstream
Data rate             287         440
Noise margin     32.3        18.6
Output power   14.8        12.7
Attenuation       58.5      28.9
Figures from speedtester BT
Download speed: 180 Kps
acceptable range speeds is 100 - 250 Kps
DSL Connection rate 286 Kps (DOWN_STREAM) 440Kps (UP_STREAM)
Upstream Test
Upload Speed 346 kps
Upstream Profile 440Kps
Any help would be appreciated
Solved!
Go to Solution.

Hi Welcome to the forums
Your high noise margin will have a major impact on your speed
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Posing a question for those well versed in flash and flex

I would like to start an off-line communication chat with those of you who are well versed in Flash and Flex.
I've worked with Cold Fusion but I am not up to date on all the technologies available. This seems like the perfect forum for this question.
I simply want to build an application (web or desktop is unknown) in which a person can learn a foreign language, in this case English.
I need some technical advice as to whether Flash, Flex, or a combination of technologies (Cold Fusion for server side functionality) is the best choice for this application. I do not understand the technical aspects of Flash or Flex in building applications so I need the advice of you experts.
As with most foreign language textbooks, audio, or foreign language video training, the material is not interesting, not pertinent to daily life, and is great for late night insomnia. I've never seen any type of foreign language training that is interesting, fun, or uses current events as part of the curriculum.
I would like to illustrate my idea with an example. I want to use an existing English beginners textbook (for kids), scan the images in the textbook, store the content (rules of grammar) in a database and store example sentences in a database.
I would like to record basic audio sentences from the textbook (Do you know tomorrow's weather), incorporate some animation (baseball player hitting a home run), incorporate some basic video (purchasing an item at the grocery store), add a quiz, test question or puzzles, etc..
In addition, since this is a classroom setting and the kids are split into groups, I would like to store a seating chart with the kids names and pictures in a database. After the first segment is finished (e.g. purchasing a toy at the store) the kids next perform an activty. I want to use a combination of audio, video, and animation to explain the activity, give instructions, split the class into groups,and perform the activity.
As I mentioned before, I would like to start an off-line discusion for those of you who are willing to share some of you knowledge and experience with both Flash and Flex. Since you are extremely busy, maybe you might be able to point me in the right direction.
Hopefully, some of you can provide some sound technical advice.
Thanks in advance
Michael Poplawski

This is an abitious project even for some-one well versed in flex/flash, i have to give you points for outstanding courage on this .
You need to cover quite a few areas in a project like this both for the client and the back end, you need a strong understanding of animation(either through code or the flash timeline), data parsing, logic trees for the quiz/test elements and a lot more before the first line of code would be written.
In Australia there are already a few companies using flex for online educational applications and at least 1 state educational Authority. A search on the internet will find several sites pertaining to flash/flex based online education software and this would be a starting point to give you an idea of the strength flex has in this area.
Beyond this it is not the sort of project that 'help' would be readily available for unless it was relating to very specific issues you could readily define. Also this is not the best forum to request this type of help as the forum is more about testing a beta product. I am sure that if you start learning about flex and have trouble understanding different aspects of how things work there will be plenty of support from the flex community.
Message was edited by: David_F57
by forum I don't mean the whole forum just this branch.

8520 curve rror: Sqlite Error (schema update): net.rim.device.api.database.DatabaseException: SELECT name FROM sqlite_master WHERE type = 'index' AND name = 'chat_history_jid_index': disk I / O error (10).

Dear team support,
I have a problem with my WhatsApp Messenger.
my whatsapp wont save message history. couse error.
Error: Sqlite Error (schema update):
net.rim.device.api.database.DatabaseException: SELECT name FROM sqlite_master WHERE type = 'index' AND name = 'chat_history_jid_index': disk I / O error (10).
Please advise me how can i solve my memory card issue..
Thanks

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Could anyone tell what's diff between mvt type 301 and 647?

Hi,
Since there has 301 already why still need 647??
What's the difference???
Thanks!!!
Would be better tell some detail regarding the movement type useage and difference in different module...
Thank you very much

Hi,
Movement type 301 is used to transfer material from a storage location in one plant to a storage location in a different plant. The value of the material is transferred at the moving average price of the issuing plant.
Movement 301 needs to be used each time material is moved from plant to plant. Normally both plants would be within the same agency and the physical distance not great when this movement type is used.
A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
For more knowledge in Movement type check out this
http://forum.saptechies.com/viewtopic.php?p=7505&sid=ee37f12564fc1c8aa9e5e131a5f402d9
Reward if this helps you
Regards
AK

Code Hinting and coloring Feature not working

In most of the related pages the code hinting feature is working great but in this asp page it give a warning saying : there is a syntax error on line xxxx. Code hinting may not work until you fix this error.
the code is as follows
<%
     sub jsWindowOnLoad()
%>
     <script type="text/javascript">
     function init1()
         <% '''''this place error
               if cp_name="Event" then
       %>
          dp_start_date = new Epoch('epoch_popup','popup',document.getElementById('Start_dt'));
          dp_end_date = new Epoch('epoch_popup','popup',document.getElementById('End_dt'));
          <%        .         %>
       </script>
<%
     end sub
%>
the ' <% ' marked with a comment is the place where the prompt appears.....
It is stored as .asp file
this file is is used as an include file in many other files....and apparently wherever this file appears in the include section the code hinting for that .asp file goes haywire. also all the asp and javascript code appears in the same color throughout the asp file.
due to the non working of code hinting and coloring my speed of development and error debugging is greatly reduced .... kindly suggest what can be done
just to clarify.....There is no problem in execution....everything works absolutely fine (even in the above code...) only no code hinting and color !!!

An example zip containing a simple project would be very helpful. Can you provide one or maybe a link to one?
My first guess would be that you're missing the Flex project nature on your project. You can add it by right clicking on your project and select Add/Change Project Type > Add Flex Project Type...
From there, you'll have to fix your project properties Flex Build Path > "Main source folder" to point to parent/flex-project or wherever the root of your flex source files are.
Thanks,
Jason San Jose
Quality Engineer, Flash Builder

[svn:fx-trunk] 10889: Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput , respectively, of type UIFTETextField and MXFTETextInput.

Revision: 10889
Author:   [email protected]
Date:     2009-10-06 09:29:53 -0700 (Tue, 06 Oct 2009)
Log Message:
Add FTETextTests which check that a Label and NumericStepper configured to use FTEText have a textField and textInput, respectively, of type UIFTETextField and MXFTETextInput. The components are configured via style properties rather than by theme which would require another version/compile of the BasicTests.swf.
QE notes:
Doc notes:
Bugs:
Reviewer: Alex
Tests run: basictests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests-config.xml
    flex/sdk/trunk/frameworks/tests/basicTests/BasicTests.mxml
Added Paths:
    flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/FTETextTestScript.mxml
    flex/sdk/trunk/frameworks/tests/basicTests/halo/views/FTETextTests.mxml

I'm also having this problem. I'm using Flash Builder 4.6, AIR 3.4 and I've made a DLL (e.g. ExtensionDll.dll) which needs to call functions in another DLL (e.g. DllUsedByExtensionDll.dll) . I've made sure my ANE is working with the ExtensionDll.dll already, so there are no issues with my actionscript code or my ANE packaging or my DLL compilation. However, once I start calling functions from the other DLL, it starts throwing me Error #3500. Even if I call this function (e.g. abc()) in ExtensionDll.dll, but I never actually use the function from actionscript, and I call another function (e.g. def()) from actionscript, the Error #3500 still appears, so it does not seem to depened on the whether the code is used or not.
It's similar to this problem.
http://stackoverflow.com/questions/9823504/how-to-use-external-dll-in-air-native-extension
Does anyone have a solution or at least a way to debug this?

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Allow mov type 261 and 262 for a material type only

Requirement is to allow movt type 261 and 262 for a particular material type.( Assume Only 261 - 262 issue transactions happen against that material type.)
User to be restricted, while material issue (migo), for the material type XXXX to 261 - 262 movt type only.
No any other movt type allowed for this material type while issuing material.
All suggestions welcomed.
Regards,
Rakesh

Thanx amit.
But same user uses all other movt types for other material type also.

Period 001/2010 is not open for account type S and G/L 799999

Hi friends
I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display The specified year 2009 is not the current calender year.
Thanks
Raj

Hi
Hope you are doing this in test server
If this is a real time issue this needs to be addressed by a FI consultant
First see for your company code what is the posting period varient maintained in OBY6
Say if it is 1000
Then in OB52
Maintain a setting like this
1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
Then save it
This is for Account type S that is GL accounts
Preferably maintain the same for A, + , D, K, M, V
Regards
Raja

PHP Type Hinting and Flex Issue

Similar Messages

Maybe you are looking for