PHP updating a data base field issue

HI
I am using a multiple select box to allow multuple vales to be selected and entered into the database
when i add the filed values i use implode to seperate the values with a comma.
$insertSQL = sprintf("INSERT INTO finance_data (Link_record,Savings_Year, Savings_Trust, Savings_Type, Savings_Amount, Savings_Additional_Notes) VALUES (%s, %s, %s, %s, %s, %s)",
          GetSQLValueString($_POST['inserttracker'], "text"),
                       GetSQLValueString($_POST['Savings_Year'], "text"),
                       GetSQLValueString($_POST['Savings_Trust'], "text"),
                       GetSQLValueString(implode(',', $_POST['Savings_Type']), "text"),
                       GetSQLValueString($_POST['Savings_Amount'], "double"),
                       GetSQLValueString($_POST['Savings_Additional_Notes'], "text"));
when i then use an update method, the value is shown correctly in the field, however using the same implode to update the field in the same way does not seem to work and instead leaves me with a null value on update
i tried using different varibles and doing the implode outside of the update even called it something else, but i have had no luck
update code
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE finance_data SET Link_record=%s, Extended_Index=%s, Savings_Year=%s, Savings_Trust=%s, Savings_Type=
%s, Savings_Amount=%s, Savings_Additional_Notes=%s WHERE Master_index=%s",
                       GetSQLValueString($_POST['Link_record'], "int"),
                       GetSQLValueString($_POST['Extended_Index'], "text"),
                       GetSQLValueString($_POST['Savings_Year'], "text"),
                       GetSQLValueString($_POST['Savings_Trust'], "text"),
                       GetSQLValueString(implode(',', $_POST['Savings_Type']), "text"),
                       GetSQLValueString($_POST['Savings_Amount'], "double"),
                       GetSQLValueString($_POST['Savings_Additional_Notes'], "text"),
                       GetSQLValueString($_POST['Master_index'], "int"));
any suggestion would be helpful
Thanks

Krazy Maud wrote:
when i then use an update method, the value is shown correctly in the field, however using the same implode to update the field in the same way does not seem to work and instead leaves me with a null value on update
Have you checked whether $_POST['Savings_Type'] is an array? The name attribute of the multiple select element needs to have an empty pair of square brackets like this:
<select name="Savings_Type[]" multiple>

Similar Messages

Add zfield to va01 and updating the data base

Hi friends,
I have requirement to add Zfields to vbak and updating the Zfield value to VBAK.
But my problem is when am trying to save or changing the Zfield into data base it is not saving the zfield value and it is not detecting the change value of Zfield in VA02.
Can any provide the solution if possible.
Thanks in advance.
sasi.

Hi friend ,
my requirement to update the Zfield information in vbap table. Even if am try using the user exit move_field_to_vbap it is not getting triggered if we chage the zfield value.it is only getting triggered during the change of standard field.
when am trying to save the Zfield value we are getting the message No data changed. in that case data is not getting updated to data base table vbap
thanks in advance,
sasi.

Function module updating the data base table

Hi,
This post is regarding the function module not updating the data base table.
I am calling the FM SD_SHIPMENT_HEADER_CHANGE inside the ZFM. It's returning success an changing the table c_xvttk_new with the new TDLNR value. But it's not updating the Shipment table VTTK-TDLBR or VT02N Forwarding agent.
When I directly updating Forwarding agent in VT02N it's updating fine.
Please let me know what the extra step need to be included to update or COMMIT the FM for updating
Forwarding Agent(VTTK-TDLNR).
Best Regards,
Mahesh

hi friend,
This link wont five u the complete help but if u ananyse it then it might provide u some idea......
BAPI change shipment doc
regards
kanishak

Firm/Trade-off Zone Indicator - Data base field.

I'm looking for the data base field that holds the Firm/Trade-off Zone Indicator as it displays on the Delivery Scheduling Agreement, Delivery Schedule for Items from ME33L. The help for the field gives you the same information as for the Firm Zone And Trade-Off zone values in days (stored in EKPO), but this field displays differently for different schedule lines, and is a "1" - indicator for Firm Zone, or a "2" Indicator for Trade-Off Zone.
I'm beginning to wonder, is this field dynamic and just determined for display at the time the transaction is done ???
As in fact the lines within the firm zone are displayed in a different way (with an * following the MRP element data) on MD04.
But we were trying to determine where (IF) the field indicator is stored, and if so, what is setting it, as "some process" would have to be evaluating all orders as time passes to know they have now come within the firm zone.   If its not just a dynamic field.
Ruth Jones

Hi Ruth,
This one is dynamic (I guess you are wrinting about screen field RM06E-ETSTA visible e.g. in ME38/ME39 t-code).
And I guess it is calculated here:
Include: MM06EFET_ETT_ETSTA
FORM ETT_ETSTA.
   CLEAR RM06E-ETSTA.
   IF EKPO-ETFZ1 NE 0.
     REFE1 = EKET-EINDT - SY-DATLO - EKPO-ETFZ1.
     IF REFE1 <= 0.
       RM06E-ETSTA = '1'.
       EXIT.
     ENDIF.
   ENDIF.
   IF EKPO-ETFZ2 NE 0.
     REFE1 = EKET-EINDT - SY-DATLO - EKPO-ETFZ2.
     IF REFE1 <= 0.
       RM06E-ETSTA = '2'.
     ENDIF.
   ENDIF.
ENDFORM.
I guess you can call this form in your report logic/query and you should get exactly what you need.
Best Regards,
Tomek

CRM sales order and data base field in R/3

Where can I see in R/3 that the replicated CRM sales order is created in CRM?
Is there a field e. g. in the data base table VBAK or VBAP?

Hi,
you can find the information in VBAK table in field LOGSYSB, which is the logical system with which document was created.
Enter the CRM logical system name in this field, and you will find all the orders created in CRM system.
Regards,
Susanta

Data base fields in browse mode

Appleworks v 6.2.9
Have data base with 54 fields. List mode fine, but in browse mode
only first 34 are viewable and therefore available for data entry.
When tab key is punched after data entered in 34th field cursor goes
back to 1st field rather than 35th field. Command and down arrow keys
brings up next record. Is there a keyboard shortcut or any other way
to enter data in fields 34-54 in browse mode? Using list mode for
that is too confusing because 1st field identifies record name and
once past 34th field it is no longer viewable.

Hi Frank,
I'm assuming the Layout you are referring to is the default "Layout 1" that AppleWorks creates as you define the fields. This layout, or a "Standard" layout created through the New layout menu item in the Layout menu is a simple list of fields (with labels containing the field name) one above the other in a single column.
AppleWorks Database Layouts are restricted to a single page in the page size defined in Page Setup (File menu). With the default US Letter size page, at around 34 fields, the list runs into the bottom of the page, and no fields created after that are automatically inserted into the layout.
You can place more than 34 fields on a page, but you must contribute to the process.
With Layout 1 (or any other layout you wish to modify) showing, go Layout > Layout to put the document into Layout mode. (You can also do this by pressing shift-command-L.)
In Layout mode, select one or more of the fields (and labels) at the bottom of the page and drag them up and to the right into some empty space on the layout. New fields inserted onto the layout will be inserted in the space between the bottom-most field and the bottom of the layout/page, so the object of this exercise is to open up enough space at the bottom of your layout to insert the remaining 20 fields. It may take more tthan a single step to do this.
When you have all 54 fields on the page, rearrange them in the order and in the locations you want.
Note that the default tab order for a latout is from left to right then top to bottom, starting at the top left. If this order is not suitable, you can override it using the Tab Order... menu item in the Layout menu.
Regards,
Barry

Appleworks freezes when attempting to change a data base field

In a data base I created, trying to change a number in one field will freeze Appleworks. A number can be entered, but any attempt to delete, add to or change the data in that one field causes a freeze. This does not happen in any other field in this data base, nor in any other document, as far as I know. This is a fairly recent problem, and did not occur when the data base was first created.
Is there a way to fix this without losing all the data in that field?
Thanks!

Hi Yvan,
I'm sorry, but your link did not help my particular problem.
Can I make a list of the "freezing" field and an identifying second field, delete the problem field, and then re-enter the data in a newly created field? Being efficient (read lazy) I was trying to get away from having to re-enter all the data. There are only 384 records, but the thought of redoing even one field is mind-numbing.
Anyone else have a suggestion???
Thanks!

Update form & date time field

Platform: ASP classic
DB: MSSQL
I have a datetime field on an update form that is giving me
fits. When
I do not enter a value it throw an error about wrong data
type. When I
put this code in
if (isnull(CStr(Request.Form("Left_Date")))) then
that processes the update without the datetime field. The
else part of
the statement processes with the datetime field. The if does
not work.
Any idea how this situation should be handled?

jsteinmann wrote:
> does that column allow nulls?
This morning I did a little more digging and ended up with
isdate.
That solved the problem. I also had another problem, it was a
kin to
hitting yourself in the head with a hammer, your head won't
hurt if you
quite swinging the hammer.
But to answer your question, yes it did allow nulls.
Thanks for the response.

Unanswered Quesition about data base fields

I posted the below message quite some time ago and have gotten no replies. Is it that it's impossible to do, or just that no one knows the answer?
I notice in the "select views" menu that there are many data fields in the itunes database that do not show up in the get info tab. I would like to be able to easily enter data into fields such as "description" and "kind" without having to do it in the main grid, which is a pain. Is there any way to get access to these fields in a form such as the get info one?

The ones you cannot edit are determined by other stuff. For example, Last played, Playcount, Kind, Description are all computed or picke dup from the file itself.
There some apps which will read the database but you cannot put it back into iTunes.

How to update the data base table with data

i have two ztables, one is zfm_kfz and other one is zfm_kmvrg
zfm_kfz is maintained by using table maintenance generator as well as alv grid control for list display.
zfm_kfz the field r like this KFZR, GERAET, KOSTENTRAEGER, BEZEICHNUNG, TUVDATUMMMYYYY, ASUDATUMMMYYYY, KMSTAND, HISTO AND REIFEN.
PROBLEM: all the data in grid control r updated except KMSTAND
fields in zfm_kmvrg are kostentraeger, kfznr and kmstand i m creating table control for this screen here what ever enter the last km stand is updated in the list.for one kfznr many kostentraegers and kmstand, the last km stand is updated here , go through this code plz hepl me
CONTROLS tabctrl TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF tabctrl-cols,
      lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF zfm_kmvrg,
      fs_itab LIKE LINE OF itab,
      fl_change TYPE c,
      fl_error TYPE c.
*TABLES fs_itab.
LOOP AT tabctrl-cols INTO cols.
cols-screen-input = '0'.
MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
ENDLOOP.
*SELECT * FROM spfli INTO TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_101'.
DESCRIBE TABLE itab LINES lines.
tabctrl-lines = lines.
ENDMODULE.                    "status_0100 OUTPUT
MODULE cancel INPUT
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.                    "cancel INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itab FROM fs_itab INDEX tabctrl-current_line.
ENDMODULE.                    "read_table_control INPUT
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
DATA:
    lw_index TYPE i.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'ADD'.
      LOOP AT tabctrl-cols INTO cols.
        cols-screen-input = '1'.
        MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
      CLEAR fs_itab.
      APPEND fs_itab TO itab.
    WHEN 'SAVE'.
      IF NOT itab[] IS INITIAL.
        LOOP AT itab[] into FS_ITAB.
          lw_index = sy-tabix.
          IF NOT fs_itab IS INITIAL.
            MODIFY ZFM_KMVRG FROM fs_itab.
            IF sy-subrc EQ 0.
              UPDATE ZFM_KFZ set kmstand = fs_itab-kmstand
                                    WHERE kfznr = fs_itab-kfznr.
            ELSE.
              fl_error = 'X'.
              WRITE:/ 'The record number', lw_index,
                      'has not been updated'.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ELSE.
        MESSAGE s000(0) WITH 'No data is present to update'.
      ENDIF.
ENDCASE.
IF fl_error = 'X'.
    LEAVE TO LIST-PROCESSING.
ELSE.
    MESSAGE s000(0) WITH
          'All the records have been updated successfully'.
ENDIF.
ENDMODULE.                    "user_command_0100 INPUT
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO fs_itab WITH CONTROL tabctrl.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
    module read_table_control.
ENDLOOP.
module user_command_0100.
i m trying many times i m not getting proper output, plz help me on this

Hi,
I am hereby givng the similar sample code.Check this with your requirement.
In the flow logic of the screen 9000, write the following code.
PROCESS BEFORE OUTPUT.
MODULE set_status.
MODULE get_t_ctrl_lines.
LOOP AT i_makt WITH CONTROL t_ctrl CURSOR t_ctrl-current_line.
* Dynamic screen modifications
    MODULE set_screen_fields.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT i_makt.
    FIELD i_makt-pick MODULE check.
    FIELD i_makt-zmatnr MODULE zmatnr .
ENDLOOP.
MODULE user_command_9000.
In the program, write the following code.
PROGRAM SAPMZTC MESSAGE-ID zz.
* Tables Declaration
TABLES: zzz_makt.
* Internal table Declaration
DATA : i_makt TYPE STANDARD TABLE OF zzz_makt WITH HEADER LINE.
* Table control Declaration
CONTROLS: t_ctrl TYPE TABLEVIEW USING SCREEN '9000'.
* Variable Declaration
DATA : flg,           "Flag to set the change mode
       ln TYPE i.     "No. of records
*&      Module get_T_CTRL_lines OUTPUT
* Populating data
MODULE get_t_ctrl_lines OUTPUT.
SELECT zmatnr zmaktx
         INTO CORRESPONDING FIELDS OF TABLE i_makt
         FROM zzz_makt.
DESCRIBE TABLE i_makt LINES ln.
* To make the vertical scroll bar to come on runtime
t_ctrl-lines = ln + 100.
ENDMODULE.                 " get_T_CTRL_lines OUTPUT
*&      Module USER_COMMAND_9000 INPUT
* Triggering event according to the user command
MODULE user_command_9000 INPUT.
DATA :lv_fcode LIKE sy-ucomm,    "Function Code
        lv_answer(1) type c.       "Storing the answer
lv_fcode = sy-ucomm.
CASE lv_fcode.
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'DELETE'.
* Setting the flag to make the table control in editable mode after
* deleting the selected line
      flg = 'Y'.
* Confirmation of delete
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
         TITLEBAR       = 'Confirm'
         text_question = 'Are you sure to delete from database?'
         TEXT_BUTTON_1 = 'Yes'(001)
         TEXT_BUTTON_2 = 'No'(002)
        IMPORTING
         ANSWER         = lv_answer.
      if lv_answer eq '1'.
* Updating the database table from the internal table
        UPDATE zzz_makt FROM TABLE i_makt.
* Deleting the selected row from the internal table
        DELETE i_makt WHERE pick = 'X'.
* Deleting the selected row from the database table
        DELETE FROM zzz_makt WHERE pick = 'X'.
        MESSAGE s005 WITH 'Deleted Successfully'.
      ENDIF.
    WHEN 'SAVE'.
* Inserting new record or updating existing record in database table
* from the internal table
      MODIFY zzz_makt FROM TABLE i_makt.
      MESSAGE s005 WITH 'Saved Successfully'.
    WHEN 'BACK'.
      SET SCREEN '0'.
    WHEN 'EXIT' OR 'CANCEL'.
* Leaving the program
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module set_screen_fields OUTPUT
* Setting the screen fields
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
    IF flg IS INITIAL.
      screen-input = 0.
    ELSEIF ( flg EQ 'Y' ).
      IF ( ( screen-name = 'I_MAKT-ZMAKTX'
             OR screen-name = 'I_MAKT-CHECK1' )
            AND t_ctrl-current_line LE ln ) .
* Making the screen fields as editable
        screen-input = 1.
      ELSEIF ( ( screen-name = 'I_MAKT-ZMATNR' )
                 AND t_ctrl-current_line LE ln ).
* Making the screen field as uneditable
        screen-input = 0.
      ENDIF.
    ENDIF.
* Modifying the screen after making changes
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " set_screen_fields OUTPUT
*&      Module zmatnr INPUT
* Appending records to the internal table
MODULE zmatnr INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
IF t_ctrl-current_line GT ln.
    READ TABLE i_makt WITH KEY zmatnr = i_makt-zmatnr.
    IF sy-subrc NE 0.
* Inserting record if it does not exist in database
      APPEND i_makt.
    ELSE.
     MESSAGE i005 WITH 'Material Number' i_makt-zmatnr 'already exists'.
    ENDIF.
ENDIF.
ENDMODULE.                 " zmatnr INPUT
*&      Module set_status OUTPUT
* Setting the GUI status
MODULE set_status OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE.                 " set_status OUTPUT
*&      Module CHECK INPUT
* Modify the internal table using the current line in table control
MODULE check INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
ENDMODULE.                 " CHECK INPUT

Select or Select....for update nowait (data write concurrency issue)

Hello everyone,
I am working on a jsp/servlet project now, and got questions about which is the better way to deal with concurrent writing issues.
The whole senario is described as following:
First each user is viewing his own list of several records, and each record has a hyperlink through which user can modify it. After user clicks that link, there will be a popup window pre-populated with the values of that record, then user can do the modifications. After he is done, he can either click "Save " to save the change or "Cancel" to cancel it.
Method1---This is the method I am using right now.
I did not do any special synchronization measures, so if user 1 and user2 click the link of same record, they will modify the record
at the same time, then whose updates will take effect depends on who submits the request later. If user1 submitted first, then user 2, user1
will not see his updates. I know with this method, we will have the problem of "Lost Updates", but this is the simplest and efficient way to handle this issue.
Method2--This is the method I am hesitating.
I am considering to use "Select....for update nowait " to lock a record when user1 has selected one record and intended to modify it. If user2 wanted to modify the same record, he is not allowed. ( by catching the sql exception.)But the issue I am concerned about is because the "select .. For update" action and "Update action" are not so consecutive as many transaction examples described. There could be a
big interval between " select " and "update" actions. You could not predict user's behavior, maybe after he open the popup window, it took him a while to make up his decision, or even worse, he was interrupted by other things and went away for the whole morning?.Then the lock is just held until he releases it.
And another issue is if he clicks "cancel" to cancel his work, if I use method1, I don't need to interact with server-side at all, but if user method2, I still need to interact with the server to release the lock.
Can someone give me some advice ? What do you do to deal with similar situation? If I did not make clear of the question, please let me know.
Thanks in advance !
Rachel

Hi Rachel,
Congratulation, you have found a way to overcome your programming business logic.
Have you ever consider that the solution of using CachedRowset concept yet to be included in j2se 1.5 tiger next year too prove workable under the scenario , whereby you can disconnect from the database after you have execute your query and reconnect again if you have to do transactional activity later, so that the loading overhead as well as the data pooling activity could be well balanced off.
Although rowset is still not an official API now, but its potential to me is worth consideration.
I have written a simple but crude cut JSP programme posted on this forum under the heading "Interesting CachedRowset JSP code to share " to demonstrate the concept of CachedRowset and hoping that the Java guru or the developer could provide feedback on how to imporve on the programming logic or methodology.
Thanks!!

Help in establishing connection to php and mysql data base.

Hi,
i have been trying to execute a simple flash program that communicates with a php page which is linked to a mysql database.
somehow the php is not returning any data to flash , and even falsh is not sending any data to php.. I am using wamp server on win7.
Heres my actionscript code:
stop();
var variables:URLVariables = new URLVariables();
var varSend:URLRequest = new URLRequest("php.php");
varSend.method = URLRequestMethod.POST;
varSend.data = variables;
var varLoader:URLLoader = new URLLoader;
//varLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
varLoader.dataFormat = URLLoaderDataFormat.TEXT;
varLoader.addEventListener(Event.COMPLETE, completeHandler);
variables.requestCode = "homepage";
//variables.myRequest="homepage";
trace(variables);
varLoader.load(varSend);
function completeHandler(event:Event):void
    trace(event.target.data.t_passed);
    var t_recieved = event.target.data.t_passed;
    //t_txt.text = "t_passed";
    t_txt.text=t_recieved;
try
    varLoader.load(varSend);
catch (error:Error)
    trace("error");
And this is my php code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<?php
//error_reporting(E_ALL & ~E_NOTICE);
$connection=mysql_connect("localhost" , "root" , "");
if(!$connection)
    die("failed".mysql_error());
$db_select = mysql_select_db("questions",$connection);
if (!$db_select)
    die("failed".mysql_error());
    if ($_POST['requestCode'] == "homepage") {
    $pageName = $_POST['requestCode'];
    echo ($_POST['requestCode']);
$result=mysql_query("select q from quest where qno=111",$connection);
while($row=mysql_fetch_array($result))
$t=$row[0];
//print "t_passed = $s";
echo "t_passed=".$t;
mysql_close($connection);
?>
</head>
<body>
</body>
</html>
The php gives me Undifined notice for the 'requestCode' variable...
please help..
Thanks in advance

Sample Flash Code:
package
    import flash.display.*;
    import flash.events.*;
    import flash.net.*;
    import flash.text.*;
    public class sendtophp extends Sprite
        var phpFile:String = "http://localhost/Raja/sendDataToServer.php";
        public function sendtophp():void
            callBtn.addEventListener(MouseEvent.CLICK, callServer);
        function callServer(e:MouseEvent):void
            var urlRequest:URLRequest = new URLRequest(phpFile);
            var urlParams:URLVariables = new URLVariables();
            urlParams.country = "India";
            urlParams.animal="Tiger";
            urlRequest.method = URLRequestMethod.POST;
            urlRequest.data = urlParams;
            var loader:URLLoader = new URLLoader();
            loader.addEventListener(Event.COMPLETE, serverResponse);
            loader.load(urlRequest);
        function serverResponse(e:Event):void
            trace("loaded");
            var loader:URLLoader = URLLoader(e.target);
            var variables:URLVariables = new URLVariables(loader.data);
            responseTxt.text = variables.returnValue;
    }//end of class sendtophp
}//end of package
Sample PHP code:
<?php
print "returnValue= Hi ".$_POST['country'].", it's working";
    $host = "localhost";
    $user = "root";
    $pass = "";
    $db = "test";
    $country = $_POST['country'];
    $animal = $_POST['animal'];
     $connection = mysql_connect($host, $user, $pass) or die ("Unable to connect!");
     mysql_select_db($db) or die ("Unable to select database!");
      $query = "INSERT INTO symbols (country, animal) VALUES ('$country', '$animal')";
      $result = mysql_query($query) or die ("Error in query: $query. ".mysql_error());
    echo "New record inserted with ID ".mysql_insert_id();
       mysql_close($connection);
?>
I had tested and it works fine. Please have this as an sample. If you have any clarification then reply to the thread

Va02 screen input first save it has to update the data base table

I am working on VA02.
For only one user(delivery block)should be block and when we are changing in sales order document for that user it has to update the VBAK table.
for second save i'm able to updating but i want to update at first save only.
thanks,
sree.

I want to update the DB table VBAK. and the user exit is:
here is my coding: my requirement is to block a field i.e LIFSK in va02 and after saving that and i have checked vbak table then in lifsk the blocked db is updated IN TABLE CONTENTS.LATER IF I SAVE IT ANOTHER TIME WITHOUT ANY MODIFICATIONS THE FIELD IS NOT UPDATED.
now the problem is with updation .i have blocked the field.
Please help me its urgent
FORM USEREXIT_MOVE_FIELD_TO_VBAK.
tables: knkk.
if not vbak-kunnr is initial.
if vbak-auart NE 'ZFD' and
     vbak-auart NE 'ZCR2' and
     vbak-auart NE 'ZRE' and
     vbak-auart NE 'ZSD'.
    select single * from KNKK
      where KUNNR = vbak-kunnr
      and    KKBER = '8000'.
      if sy-subrc = 0.
        clear vbak-LIFSK.
      ENDIF.
      IF NOT SY-UNAME = 'FINCOMM1' AND SY-TCODE = 'VA02'.
          SELECT SINGLE LIFSK FROM VBAK INTO LIFSK1 WHERE VBELN = VBAK-VBELN.
           IF LIFSK1 NE ' '.
              vbak-LIFSK = ' '.
           ELSEif vbak-auart eq 'ZCR2'.
                  vbak-LIFSK = 'Z1'.
              ELSE.
                  vbak-LIFSK = 'Z6'.
           endif.
         if sy-tcode eq 'VA02' . "added on 22/05/2008
        if screen-name = 'VBAK-LIFSK'.
              screen-input = 1.
              modify screen.
              update vbak.
        endif.
ENDIF.
      ENDIF.
endif.
endif.
if sy-tcode eq 'VA02' AND sy-uname NE 'FINCOMM1'. "added on 22/05/2008
        if screen-name = 'VBAK-LIFSK'.
          screen-input = 1.
              modify screen.
              update vbak.
        endif.
endif.
endform.
Thanks,
sri.

IDOC field to SAP data base field

Is there any way to find out the field names of SAP database table associated with the IDOC fields??
I would appreciate for any types of help in this.
Pranav

Hi,
To find inbound FM, you can go to transaction WE57. Go to selection -> by contents (menu), select basic type and enter the corresponding IDoc type. The system will display the corresponding FM(s).
You can also go to transaction WE64 to find the inbound and outbound FM(s).
Regards,
Ferry Lianto

How to trigger pop-up window in report and update data base from report

Hi All,
I have a requirement, in a report output list to trigger a pop up window with some rejection codes corresponding to each sales order when i select from the output list. Also i need to update data base by selecting one of the rejection code in the pop-up window list for that sales order. Can any one please let me know how to achive this.
Also, i have check boxes for each record in the output list. Also, i have added one more check box as "Select All'. When select 'Sleect All' check box , all check boxes need to be checked, how to achieve this. PLease let me know.
Thanks in advance.
Regards,
Rajesh

Hi check this code of editable ALV report... I updated the data base with the changes made..in the editable ALV
*& Report ZJAY_EDIT_ALV
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

PHP updating a data base field issue

Similar Messages

Maybe you are looking for