Firm/Trade-off Zone Indicator - Data base field.

I'm looking for the data base field that holds the Firm/Trade-off Zone Indicator as it displays on the Delivery Scheduling Agreement, Delivery Schedule for Items from ME33L.  The help for the field gives you the same information as for the Firm Zone And Trade-Off zone values in days (stored in EKPO), but this field displays differently for different schedule lines, and is a "1" - indicator for Firm Zone, or a "2" Indicator for Trade-Off Zone.  
I'm beginning to wonder, is this field dynamic and just determined for display at the time the transaction is done ???
As in fact the lines within the firm zone are displayed in a different way (with an * following the MRP element data) on MD04.
But we were trying to determine where (IF) the field indicator is stored, and if so, what is setting it, as "some process" would have to be evaluating all orders as time passes to know they have now come within the firm zone.   If its not just a dynamic field.
Ruth Jones

Hi Ruth,
This one is dynamic (I guess you are wrinting about screen field  RM06E-ETSTA visible e.g. in ME38/ME39 t-code).
And I guess it is calculated here:
Include: MM06EFET_ETT_ETSTA
FORM ETT_ETSTA.
   CLEAR RM06E-ETSTA.
   IF EKPO-ETFZ1 NE 0.
     REFE1 = EKET-EINDT - SY-DATLO - EKPO-ETFZ1.
     IF REFE1 <= 0.
       RM06E-ETSTA = '1'.
       EXIT.
     ENDIF.
   ENDIF.
   IF EKPO-ETFZ2 NE 0.
     REFE1 = EKET-EINDT - SY-DATLO - EKPO-ETFZ2.
     IF REFE1 <= 0.
       RM06E-ETSTA = '2'.
     ENDIF.
   ENDIF.
ENDFORM.
I guess you can call this form in your report logic/query and you should get exactly what you need.
Best Regards,
Tomek

Similar Messages

  • Firm or Trade-Off Zone Indicator not set

    Hi
    I have created the scheduling agreement and run the MRP by this the schedule lines are generated but the system has not set Firm or Trade-Off Zone Indicator how do I go head? IS there any customization/master data required to set the this indicator?
    Please suggest.
    Regards,
    Prashant.

    This depends a bit on how you communicate to your vendors.
    Assuming EDI, then the message to the vendor will contain a few date fields
    A. ABFDE End of production go-ahead
    Which is the 'end' of the FIRM ZONE
    B. ABMDE End of material go-ahead
    Which is the 'end' of the TRADEOFF ZONE.
    Upon receipt the vendors system will recognize these dates.
    Assuming printout, you need to work in SAP-Script/Smartform to detail the effect of these date on your print.
    Either by also mentioning these in the item header (remember each item has an unique FZ/ToZ setting). Or by using special markers on the date lines, based on these dates.
    Regards
    JP

  • Firm Zone and Trade off Zone in Scheduling Agreement

    Dear All
    Please explain in detailed the concept of Firm Zone and Trade off Zone in Scheduling Agreement, and it's effects in MRP run, i.e. If i take a MRP run for a material whci is having firm zone as 30 days and trade off zone as 60 days then what will be the result of MRP. The Material MRP type is VB
    Thanks and Regards
    Manoj

    Hi,
    Firm zone is the time frame in which you cannot change your orders (schedule lines) that you have ordered from a vendor in any way (Date change nor quantity change).
    Trade off zone is time frame within which you can make changes to your procurement proposals, these changes are acceptable from vendor's side.
    These time frames are agreed with the Vendor and then inserted for each scheduling agreement in 'Additional data'.
    For your example if you take firm zone 30 days and trade-off zone 60 days, the check starts from current day on which MRP runs. For exampe current day is 1st Oct, all the procurement proposals with delivery date within 30 days that is till 1st September are firm orders, which MRP will not change in any case (You can find such orders with * in front of them in MD04 list). Beyond 1st september they are in trade off zone, in which MRP can modify them.
    MRP types (VB in your case) have no correlation with these zones.
    Amit G

  • Firm zone & Trade off zone

    Hi,
    Can anywhere other than Sch agreement we can maintain Firm zone,Trade off zone & creation profile so that in SA automatically these fileds get sopied.
    Regards
    MSR

    Dear Raghavendrams,
    1) Creation profile is the combination of JIT and FRC(forecast) schedules which can be maintained in customising against the sub-node - "Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu." which is located under the node - Schedule agreement in purchasing.
    2) JIT is the just -in-time schedule which means the schedule which is necessarily a firm one and therefore this schedule should fall in the firm zone.
    On the other hand, FRC is the forecast shcedule which means a tentative one and therefore this should fall in the trade-off zone.
    3) From the above it is evident that one cannot have JIT and FRC schedules maintained before hand since they are subject to  change depending on the change in the production plan. Therefore you need to maintain these in the SA only. However you can create different creation profiles  in SPRO. For instance- "14 days JIT and 6 months FRC".  This means that for a material to be supplied from a vendor, you are giving a firm requirement for 14 days and balance 6 months requirement will be the forecasted one which enables the vendor to plan their resources and which in turn can reduce the lead times drastically in addition to reduction the production stoppages.
    Creation profiles can be different depending upon the nature of material procured, type of vendor you are dealing with,his flexibility,credibility etc. For instance in case of a packaging material, the vendor is usually located very close to the manufacturing to have better space management in the warehouse.In such cases the material can be called off on daily basis i.e JIT- 1 day or even hourly basis in some cases.
    Trust, you have understood the concept.
    Regards
    Venkat

  • CRM sales order and data base field in R/3

    Where can I see in R/3 that the replicated CRM sales order is created in CRM?
    Is there a field e. g. in the data base table VBAK or VBAP?

    Hi,
    you can find the information in VBAK table in field LOGSYSB, which is the logical system with which document was created.
    Enter the CRM logical system name in this field, and you will find all the orders created in CRM system.
    Regards,
    Susanta

  • Data base fields in browse mode

    Appleworks v 6.2.9
    Have data base with 54 fields. List mode fine, but in browse mode
    only first 34 are viewable and therefore available for data entry.
    When tab key is punched after data entered in 34th field cursor goes
    back to 1st field rather than 35th field. Command and down arrow keys
    brings up next record. Is there a keyboard shortcut or any other way
    to enter data in fields 34-54 in browse mode? Using list mode for
    that is too confusing because 1st field identifies record name and
    once past 34th field it is no longer viewable.

    Hi Frank,
    I'm assuming the Layout you are referring to is the default "Layout 1" that AppleWorks creates as you define the fields. This layout, or a "Standard" layout created through the New layout menu item in the Layout menu is a simple list of fields (with labels containing the field name) one above the other in a single column.
    AppleWorks Database Layouts are restricted to a single page in the page size defined in Page Setup (File menu). With the default US Letter size page, at around 34 fields, the list runs into the bottom of the page, and no fields created after that are automatically inserted into the layout.
    You can place more than 34 fields on a page, but you must contribute to the process.
    With Layout 1 (or any other layout you wish to modify) showing, go Layout > Layout to put the document into Layout mode. (You can also do this by pressing shift-command-L.)
    In Layout mode, select one or more of the fields (and labels) at the bottom of the page and drag them up and to the right into some empty space on the layout. New fields inserted onto the layout will be inserted in the space between the bottom-most field and the bottom of the layout/page, so the object of this exercise is to open up enough space at the bottom of your layout to insert the remaining 20 fields. It may take more tthan a single step to do this.
    When you have all 54 fields on the page, rearrange them in the order and in the locations you want.
    Note that the default tab order for a latout is from left to right then top to bottom, starting at the top left. If this order is not suitable, you can override it using the Tab Order... menu item in the Layout menu.
    Regards,
    Barry

  • Appleworks freezes when attempting to change a data base field

    In a data base I created, trying to change a number in one field will freeze Appleworks. A number can be entered, but any attempt to delete, add to or change the data in that one field causes a freeze. This does not happen in any other field in this data base, nor in any other document, as far as I know. This is a fairly recent problem, and did not occur when the data base was first created.
    Is there a way to fix this without losing all the data in that field?
    Thanks!

    Hi Yvan,
    I'm sorry, but your link did not help my particular problem.
    Can I make a list of the "freezing" field and an identifying second field, delete the problem field, and then re-enter the data in a newly created field? Being efficient (read lazy) I was trying to get away from having to re-enter all the data. There are only 384 records, but the thought of redoing even one field is mind-numbing.
    Anyone else have a suggestion???
    Thanks!

  • Unanswered Quesition about data base fields

    I posted the below message quite some time ago and have gotten no replies. Is it that it's impossible to do, or just that no one knows the answer?
    I notice in the "select views" menu that there are many data fields in the itunes database that do not show up in the get info tab. I would like to be able to easily enter data into fields such as "description" and "kind" without having to do it in the main grid, which is a pain. Is there any way to get access to these fields in a form such as the get info one?

    The ones you cannot edit are determined by other stuff. For example, Last played, Playcount, Kind, Description are all computed or picke dup from the file itself.
    There some apps which will read the database but you cannot put it back into iTunes.

  • IDOC field to SAP data base field

    Is there any way to find out the field names of SAP database table associated with the IDOC fields??
    I would appreciate for any types of help in this.
    Pranav

    Hi,
    To find inbound FM, you can go to transaction WE57. Go to selection -> by contents (menu), select basic type and enter the corresponding IDoc type. The system will display the corresponding FM(s).
    You can also go to transaction WE64 to find the inbound and outbound FM(s).
    Regards,
    Ferry Lianto

  • PHP updating a data base field issue

    HI
    I am using a multiple select box to allow multuple vales to be selected and entered into the database
    when i add the filed values i use implode to seperate the values with a comma.
      $insertSQL = sprintf("INSERT INTO finance_data (Link_record,Savings_Year, Savings_Trust, Savings_Type, Savings_Amount, Savings_Additional_Notes) VALUES (%s, %s, %s, %s, %s, %s)",
              GetSQLValueString($_POST['inserttracker'], "text"),
                           GetSQLValueString($_POST['Savings_Year'], "text"),
                           GetSQLValueString($_POST['Savings_Trust'], "text"),
                           GetSQLValueString(implode(',', $_POST['Savings_Type']), "text"),
                           GetSQLValueString($_POST['Savings_Amount'], "double"),
                           GetSQLValueString($_POST['Savings_Additional_Notes'], "text"));
    when i then use an update method, the value is shown correctly in the field, however using the same implode to update the field in the same way does not seem to work and instead leaves me with a null value on update
    i tried using different varibles and doing the implode outside of the update even called it something else, but i have had no luck
    update code
    if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
    $updateSQL = sprintf("UPDATE finance_data SET Link_record=%s, Extended_Index=%s, Savings_Year=%s, Savings_Trust=%s, Savings_Type=
    %s, Savings_Amount=%s, Savings_Additional_Notes=%s WHERE Master_index=%s",
                           GetSQLValueString($_POST['Link_record'], "int"),
                           GetSQLValueString($_POST['Extended_Index'], "text"),
                           GetSQLValueString($_POST['Savings_Year'], "text"),
                           GetSQLValueString($_POST['Savings_Trust'], "text"),
                           GetSQLValueString(implode(',', $_POST['Savings_Type']), "text"),
                           GetSQLValueString($_POST['Savings_Amount'], "double"),
                           GetSQLValueString($_POST['Savings_Additional_Notes'], "text"),
                           GetSQLValueString($_POST['Master_index'], "int"));
    any suggestion would be helpful
    Thanks

    Krazy Maud wrote:
     when i then use an update method, the value is shown correctly in the field, however using the same implode to update the field in the same way does not seem to work and instead leaves me with a null value on update
    Have you checked whether $_POST['Savings_Type'] is an array? The name attribute of the multiple select element needs to have an empty pair of square brackets like this:
    <select name="Savings_Type[]" multiple>

  • Displaying images from MySQL data base

    I'm currently developing a Master/Detail
    page set. The MySQL table containing the Detail information includes a 'blob'  (MIME: image/jpeg  - Attributes - BINARY) for storing a small image. Under phpmyadmin the images show where applicable.
    In my Detail page I display the results in a table. All the values display except the image.
    I selected Insert > Image
    When the 'Select Image Source' dialogue appeared set 'select file name from' to Data source
    Selected the data base field from the established records set
    I left the 'Format' as 'None'
    Clicked OK
    Have I omitted to set something? How does Dreamweaver or the PHP code know hto to render this field?
    Hope someone can make some suggestions to resolve this.
    Thanks
    Cliff
    Other possible useful info:
    Developing on Windows XP
    Dreamweaver CS5
    all versions of MySQL, PHP, Apache, IE8, Dreamweaver up to date.

    In my desparation this morning
    I even tried to set up a mirror of your example witha separate table (just the 3 fields) and even that didn't work. The Proxy member was the same as yours except that the script was changed to LocalPHP.php . Therefore I presume that the error must have been in the webpage. Unfortunately I've since deleted the code so I can't send a copy of what I used.
    The only suggestions I could suggest that may help others that are novices are (1) suggested code for the webpage (2) a diagram illustrating how the elements link or relate to each other. Hope that is thought helpful.
    Thanks again
    Cliff

  • BAPI to update EIKP (Foreign Trade: Export/Import Header Data)

    Hello,
    Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
    Thank you.
    Best Regards,
    Sreenivas.

    Hi Sreenivas
    Try the FM EXPIMP_POSTING
    Pushpraj

  • BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data

    Hello,
    Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
    Thank you.
    Best Regards,
    Sreenivasa Chary Bathoju.

    Dear Sreeninvas,
    You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
    Thank you.
    Best Regards,
    Sasidhar Reddy Matli.

  • Creation of field in data base table

    Hi,
      I want to create a field in data base table , which holds the float values but i don't want to use the FLTP data type, why bcoz if i use this data type in selection screen of the table the the field is not appeqring, i dont want to go for the option QUAN bcoz there i need to define the ref table and ref field.
    please explain what is the way to create this field.
    regards
    Krishna

    Use NUMC
    Awrd POints if useful
    Bhupal

  • Sales order purchase order field is updated with dots in data base table

    HI
    we have problem in  Production when sale order created
    P O date is update with dots and these dots  we are unable to see at screen and data base table
    we go t change mode of the order and delete the P O field with back space (button)  and saving the order
    when we see the change log of the order
    there it is sowing
    Old value            =        "       .   .     "           
    New Value         =       " 00.00.0000"
    Can any one give the suggetions to come out of this problem
    This is we have noticed with only two customers
    Thanks and regards
    Kishore
    Edited by: DevarapalliKK on Oct 23, 2010 8:43 PM
    Edited by: DevarapalliKK on Oct 23, 2010 8:44 PM

    Hi Kishore,
    Two things could have happened:
    1) Since this is happening with only two customers - I am sure it has got to do with some custom code on your system which is causing this problem. I 'd suggest you to create a new order with all the fields
    2) It could be a bug with SAP- might want to check relevant SAP Notes. ( But this could not be a reason, if yes should have had the same prob with all cusotmers)
    regards
    sadhu kishore

Maybe you are looking for