Physical Inventory (MI09) - IDOC

Hi Gurus,
I would like to use IDOC to post inbound physical inventory posting in SAP.
Our conceptual design is to post the stock count without reference (similar to T-code MI09). May I know if any guru can share his / her experience on what should be suitable IDOC message type to be used?
Thanks!
Regards,
Michelle Low

Hello,
The IDOC type to enter physical inventory count is MATERIALPHYSINV_COUNT01. The message type for this is MATERIALPHYSINV_COUNT.
Thanks,
Venu

Similar Messages

Physical inventory idoc mapping

Hi,
I am working on a inbound physical inventory process in which I will receive a file per site for actual inventory counted. First I need to generate a idoc per site to create a physical inventory document. Then get this physical inventory document no. and map the same file to create another idoc to post the counts in the created physical inventory document in the first step.
Also, in the input file I will get the upc no. and I need to get the associated material no. for each material from sap. If anyone has done this before, Pl. let me know how to proceed in XI.
Thanks,
jassi

HI,
You can use BPM to do file to IDoc and get the Inventory document no and that no you can generate another idoc.
Or but not sure
use file to Idoc and get acknowledge from it with no.
i can elaborate based on your requirement. i mean if you are willing to work do with BPM or not..
Regards
Chilla

Outbound IDoc: Physical inventory

Hi
I would like to send a idoc(physical inventory) to an external system. Tcode MI01
Which message type should i use?

Hi Giovanni,
you should use WMMBXY.
Best regards
Ivan stojcevic

Physical Inventory & Cycle Couting for Batch Managed Materials

Hi Friends, pls help me on this scenario
Physical Inventory
For a Batch Managed Materials we have hundreds materials and thousands of batches (each batch is equally imp)
So the first step would be
Create the documents with MI31 Batch Input session
Post the count with MI34 Batch Input Session
See the difference in MI37
MIDO we get to c the physical inventory overview.
correct me if i am wrong
Cycle Count
This is a seasonal Business and ABC analysis based on requirements n Consumption doesn't work for this process. Is there any way that we can configure the system in SAP which has the ability to fulfill the following scenario.
They shud be able to select a % of materials from the storage for every month and that way they shud finish counting all of them at the end of their season. Not based on any criteria, just a part of materials ...
hope i am clear on the requirement..please suggest me something
thanks

No, it will not match, it will create its own document in background.
Why do you have one created if you dont want to do a selection ?
You cannot create a document for 1000 materials and then only count 30.
You either create a document for 30 and count 30 and enter it with MI04, or you dont create a document with SAP, count based on any other paperwork and enter the count as I said with MI09.

Multiple physical inventory counts for same storage loc

We have a plant where the same SAP storage location is used for multiple physical locations (e.g. individual build stations). We would like to be able to count by physical area rather than by part number per se. So the goal would be to enter multiple counts against the same part and post differences only when all counts are done, as defined by the aggregate of the individual counts.
Is this possible? I tested it using MI31 to create phys inventory doc, then Mi04 for count 1 and MI09 for count 2, but received a message M7700 "Physical inventory for XX is already active"
Any ideas would be appreciated.

How do you know in your SAP in which area the material is?
can you know this from MMBE or MB52?
if not, then I do not see any chance for MI31, except you just create one inventory doc for the entire location and make copies of the document for each area you have. after counting you have to consolidate each copy into one and post then the count in MI04.

Physical inventory of configurable material

Hi ,
   Can any one suggest me the process of performing physical inventory for configurable material.
Thanks ,
Deepa

Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_CONTROL
Tasks
In Physical Inventory, the user has the task of creating and processing physical inventory documents. After the physical inventory count is complete and a recount has been carried out if required, he or she posts the inventory differences and can print out a list of these.
Activities in Materials Management
Activity,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Transaction Code
Create Physical Inventory Document     MI01
Change Physical Inventory Document     MI02
Display Physical Inventory Document     MI03
Print Physical Inventory Document     MI21
Process List of Differences                     MI07
Create List of Differences with Document     MI08
Create List of Differences Without Document MI10
Print List of Differences                      MI20
Recount Physical Inventory Document     MI11
Reporting in Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_REPORTING
Tasks
The user has the task of monitoring all the data relevant to physical inventory in the Inventory Management component.
Activities in Materials Management
Activity,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Transaction Code
Display Physical Inventory Documents for Material     MI22
Display Physical Inventory Data for Material     MI23
Physical Inventory Overview     MIDO
Display Changes     MI12
Physical Inventory List     MI24
Read Physical Inventory Document Archive     MIAL
Carrying Out a Physical Inventory (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_EXECUTION
Tasks
When carrying out a physical inventory, the user has the task of entering the counted stocks in the system and changing and displaying physical inventory documents if necessary.
Activities in Materials Management
Activity     Transaction Code
Enter Physical Inventory Count with Document     MI04
Enter Physical Inventory Count without Document     MI09
Change Physical Inventory Count     MI05
Display Physical Inventory Count     MI06
Inventory Sampling (MM-IM)
Technical name: SAP_MM_IM_INVENTORY_SAMPLINGTasks
The user has the task of creating, changing, and displaying data for the inventory sampling procedure in the R/3 System or other systems. He or she carries out the individual steps in the inventory sampling procedure: assigning stock management levels, forming the stock population, forming a stratification, forming a random selection, update, and extrapolation.
Activities in Materials Management
Activity     Transaction Code
Create Inventory Sampling in the R/3 System     MIS1
Create Inventory Sampling - Other     MIS5
Change Inventory Sampling     MIS2
Display Inventory Sampling     MIS3
http://help.sap.com/saphelp_46c/helpdata/en/b5/2f2686d6f511d3b7f30000e82de955/frameset.htm
Edited by: SYED SALEEM on Mar 20, 2008 10:50 PM
Edited by: SYED SALEEM on Mar 20, 2008 11:19 PM

Physical inventory document creation for split valuated material

Hi
We are doing stock count in our company. We are using split valuation for some of the materials. When I tried to create a PID for split valuated material which are not in stock, system issued a standard error message. What I understood from that error message, we can create a PID for split valuated materials which are in stock. Is it so? If so, then how can we count split valuated material?
Let me know if you need any info.
Thanks in advance..
Jeny...

Please refer to SAP note 30254 and it should help.
Symptom
If you create a physical inventory document for a material in a storage
location without existing storage location segment, error message M7006
is displayed: 'Material & (material number) & (plant) & (storage
location) does not exist'. Thus, a storage location segment is not
created automatically for this material.
The same also applies to the batch segment. The batch segment is also
not created automatically but, if a batch is specified for a material
when creating a physical inventory document, that is not yet created for
this material, error message M7042 is generated: 'Batch & & & & does not
exist'.
The same applies to the special stock segments which are also not
created automatically. Different error messages are generated here
depending on the special stock (see also Note 64448).
Additional key words
MI01, MI09, MI10, M7076, M7183, M7184, M7185, MARD, MCHA, MCHB, MSKA,
MKOL, MSKU, MSPR, MSLB
Cause and prerequisites
If no storage location segment or batch segment or special stock segment
exists to a material, this then means that a goods movement did never
occur before in the system to this material (batch) to this storage
location (special stock), that is that the material (batch) never had a
stock to this storage location (special stock) in the system before and
that it was never posted before on this segment. It is therefore not
possible to carry out a physical inventory for such a material (batch).
It is different, if a goods movement has already occurred to a material
(batch) to this segment and if only the present stock is zero. A
physical inventory is then necessary and also feasible for this material
(batch) since the different segments are not deleted automatically in
the moment in which the stock becomes zero.
Solution
For a material for that no storage location segment, batch segment or
special stock segment exists, it is not necessary, to carry out a
physical inventory on this storage location or for this batch or this
special stock. If, however, a quantity is physically found to such a
material, the corresponding segment must be created before the physical
inventory.
There are 3 options to create storage location data:
       - maintain the 'Storage' view in the material master for the
          material and storage location or
                                                                  Page 2
       - use the 'Enter storage locations' function in the material
          master or
       - post the first goods receipt (providing, the automatic
          creation of storage location data is permitted in the plant
          and for the movement type).
There are 2 options to create batch data}:
       - create the batches in the material master manually via
          function 'Create batch'.
       - post the first goods receipt for the batches to the respective
          material.
You can only post the various special stock segments via posting a goods
receipt. An exception is special stock 'K' (vendor consignment). You
must define a consignment price in the material master for this special
stock using the 'Create vendor consignment' function before a goods
receipt can be posted for this special stock.

Need help in creating a Physical Inventory Document with HUs given

Hi Gurus,
There is a problem I am facing while doing a ALV report.
I have created the report and there is a button which i have fixed which has to create Physical Inventory Document.
The scenario is:
I will select the records in the report based on the Vessel Bill Of Lading (VBOL) (related to Batch characteristics of a material) and then i need to pass those values to create Physical Inventory Document.
I got a functional module HUINV_DOCUMENT_CREATE which will create the document but I am not clear what are the values that I need to pass in this.
Or do anyone know how to create the Document by passing HU (Handling Units) and Plant & Storage Location?
Please help me in the same.
Thanks and Regards
Vipin Das V

Hi ,
Just Pass the table of Handling Unit .That's all.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 28, 2008 5:12 PM

Physical Inventory Movement Block not Rest at Storage Location Level

Hi,
We are facing a typical problem in our Production System and the issue is as follows:
1. We have created a Physical Inventory Document for a material with Freeze Book Inventory and Posting Block indicators.
2. We completed the count and entered the same with reference to the PI Document.
3. We reconciled and posted the differences in the system.
4. We still find that in Material Master the Physical Inventory block for material movements was not reset automatically at the Storage Location stock view.
Please help us urgently as all our Goods movements for this material are held up.
Thanks

Hi,
I am able to see 4 PIDs in MI22 for my material.
2 docs pertaining to the latest Annual Physical Inventory in 2010.
These documents are for the same material in the same plant but for different Storage Locations. Out of which when i see the Material Master - Storage Location view, i see that the Physical Inventory Block "X" is set for one of the Storage Locations.
The PID for the Storage Location with this Physical Inventory Block for Movements indicator, is already settled (Count done and no differences in physical and book stock in this storage location).
The problem persists and i need to remove the posting block which was not reset.

Physical Inventory at Storage location level

hi.,
Environment ECC 6.0
Our suggestion on Physical inventory at the client site was as per SAP
"If the flag for posting block is set then no movements can be posted for that material. Note that the inventory document should be created at a material / plant / storage location level so as to not block that material at other storage locations. If a block is not required then do not flag the Set posting block indicator. It is always prudent to restrict the amount of materials being counted and to clear the count results quickly so business is not interrupted"
CLIENT feedback: " Like wise we asked the client to make the selection by Plant = 1000, SLoc = 100, and WBS =2312-344-332 and checked Posting Blocked.
My understanding was that this selection would block only the 1000/100/WBS location.
Client is having a problem is that people trying to transact in a SLoc other than 100 (200, 300, 400) are experiencing the Blocked warning.
I know I heard that we can inventory a Storage location in SAP and lock it and the rest of the sites could continue without interruption.
Any suggestions on how we can achieve this.
Tx

Hi,
Are you setting teh posting block at the time of creation of physical inventory document or by running MI32 later?
If you are running MI32, then ensure that you enter teh storage locations correctly, else the material irrespective of storage locatioons may get blocked.
Hope this helps

T-code WV31 create physical inventory for vendor consignment stock

Hi all,
I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
Best regards
Sameera
Edited by: Sameera on Dec 23, 2011 7:07 AM

Hi,
If i do physical inventory for 2 quantity.
1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
If i issue 4 quantity
2. Consignment Payables account credited with 4 qty.
If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
But I want to settele for 4 quantity.
Thanks,
Maruthi

Error while creating physical inventory document with zero count

Hi,
I am trying to create a physical inventory document for a material that has zero stock and that is not batch managed but I am geting an error as below.
"Item 001: No batches that can be included in phys. inv. exist.(Message no. M7701)"
This error occurs only for one or two materials.
I am able to create the physical inventory document for other materials which is also zero stock and there is no batch managed for the same.
Can anyone pls advice.
Regards,
Ramya

hi
if your material is split valuated, but not batch managed, then the split valuation type is shown in field batch number. And...it is a batch then.
To be able to do a zero count you have to have a batch record whose batch number is the valuation type.
If you never had stock in the storage location you want count, then you have to
1. extend the material to this storage location with MMSC
2. create the batch record with MSC1N for this storage location.

Error while activating WM Physical Inventory doc..........

Hi All,
While activating an WM physical inventory doc (LI02N) I am getting error as follows:
"Number of allowed bins exceeded after storage bin 01-01-01
Message no. L4063"
Warehouse in SU Managed & has Bin-Sectioning upto 3 -sections.
Kindly let me know if any more data is required.
Regards,
NVK

Hi,
I think it is because of the maxinum number of items limited for your warehouse in the SPRO setting LE -> Activities -> PI -> Define differences and document limits. Check the max number of bins/quants allowed per PI document for your warehouse.

Error While Doing Physical Inventory (Customer Stock)

While doing the Physical Inventory for the Customer Stock, the following error is coming:
Fld selectn for mvmt type 701 / acct 45500000 differs for Profit Center (042)
Message no. M7093 Diagnosis Comparison of the field selection strings from movement type 701 and G/L account 45500000 has revealed that there is an incompatible field selection combination at one or more points. Field for which the field selection is different: Profit Center Example On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed. System response You cannot post this transaction, unless you have changed the field selection adequately
Pls. help in solving the problem.
Regards,

Hi,
before you go any further you should first check with your finance team that the correct GL account is being proposed. the reason that the fields don't match may be caused by the fact that the wrong GL has been set up in the auto tables (Trans event Key GBB, account modifier INV and whatever valuation area and valuation class is relevant).
If the GL account is found to be the correct one then you need to get someone from the FI team to change the field settings on that account to enable the correct data to be linked to it.
None of this is the domain of an MM consultant apart fron the auto account tables and so please do involve your FI team before you do too much.
Steve B

Material blocked due to a physical inventory

Hello,
I have an issue.
I have done a stock take via MI01, MI21, MI04 and finally MI20!
When I afterwards create a delivery with one of that part that was counted it gives me an error message saying:
M7100 - Material xxx blocked due to a physical inventory
When I look into the inventory document it says: Counted, adjusted.
While debugging I found out that the process somewhere checks MARD-SPERR which is X for that part and therefore outputs messsage M7100! But X only indicates that posting block was set while physical inventory was done!
Does someone have an idea? Is there maybe a report to verify and correct inventory status?
Hope someone can help, cause I've counted a hundreds of parts which are now blocked.
Thanks for your reply.
Wolfgang

Hello Wolfgang,
If you enter the differences for your physical inventory documents against those materials, then the posting block check shall automatically go off and you can do the material movements.
First, you need to check whether you posted the differences for the respective physical inventory document.
If not you need to post the difference first as it may lead to data inconsistencies.
To remove the posting block go to MI02, enter the physical inventory document number and year, now go to Header and untick the posting block check box.
Posting block indicator
The indicator remains in the physical document header even if the stock is unblocked through the posting of inventory differences. It then only indicates that a posting block was set for the documents.
The blocking indicator can be set in one of two ways:
Directly upon entry of the physical inventory document (if the count is to take place immediately)
Shortly before the count (if the count is to take place later)
You can set the indicator by choosing Physical inventory document -> Change in the header data of the physical inventory document or via batch input.
Now you can create delivery for the materials.
Br,
Tushar
Edited by: Tushar Patankar on Jan 24, 2011 5:30 PM

Physical Inventory (MI09) - IDOC

Similar Messages

Maybe you are looking for