Physical Location and BAPI BAPI_DOCUMENT_CREATE2

Hi everyone,
I've realized that the BAPI_DOCUMENT_CREATE2 raises an exception Error while checking in and storing until I pass on the parameter
documentfiles-docfile = '/usr/sap/DG2/SYS/global/TEST.TXT'.
Now the thing is, how can I grab the path '/usr/sap/DG2/SYS/global/' programmatically?
This parameter is defined in OAC0 but does anybody know the name of the function module to invoke to get it?
Thanks!

Hi,
when I try to access that note I get: The requested SAP Note is either in reworking or is released internally only.
However, I would like to know what's the function module to use to retrieve the path associated to a certain storage category.
In fact, if I pass on the right path (which I can find out in customizing, like /usr/sap/....) I'm able to upload files. But I need to retrieve this path programmaticaly through a function module call.
Any ideas about this?

Similar Messages

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

Exactly what do you mean by a 'downloader'?
Thanks
Pete

Physical location where the soa jar(ex sca_SomePrj_rev1.0.jar) is uploaded

Hi
I had configured SOA environment in my system.
I just want to know what is the physical location where the project soa jar is uploaded to the weblogic.
I could find the jar in deploy location of the workspace, but that jar is uploaded somewhere during deployment in the weblogic domain or somewhere. Where is it?
I searched my entire domain, but could not find it out.
Is it jar'ed into some other jar, or by any chance, uploaded to the soa related tables in db(as a blob)?
Regards
RaviKiran.

Hi Kalyan,
Thanks for the reply.
What I mean is, say a composite has a bpel component, a mediator and some xsd/xsl files.
Now, all these are made to a jar, and deployed to the soa server.
What I want to know is, after deployment, where can i find that xsd/xsl/.bpel/.mplan file that I used, in the server?
Like in a webapp, they are uploaded to a particular file directory. In case of SOA, where are the files loaded? Is the jar loaded as it is and exploded at some location in the server, or, are the individual files uploaded to particular places in the server directory structure?
Because, I've searched for these files in the server physical location, and i couldn't find any(except one wsdl per composite ). So what i thought is, they were uploaded to the db schema soa_infra as blobs.
Edited by: kiransaravi on Sep 6, 2012 10:13 AM

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

Boundaries and Boundary Groups - 300 Physical locations

Hey guys -
I'm going to be deploying 300 or so Pull DP's across our environment. For the most part, it's one Pull-DP per physical location, with very little overlap. Only one site.
Based on what I'm reading, I'll need 300 Boundaries and 300 (seemingly identical) Boundary Groups, with one boundary per group. Am I getting this right? It doesn't seem that the new "Boundary Groups" really offers any benefits to us,
unless I am missing something; it's simply extra work for us.
Please correct me if I'm wrong though, and thanks!

Hi,
You are correct you need a Boundary and a Boundary Group per Pull DP. Boundary groups makes it possible to use a boundary for Site assignment or Content location and you can reuse the boundaries created.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Material/Serial Nbr is "Stuck" in a storage location and can not be moved

We have a situation created by my customers which has lead to a situation I have never seen before. A material/serial nbr. that is in our Returns location that can not be transfered, issued, removed, or anything via ANY MIGO movement type combination.
This is what happend:
- Customer return processed. Material ABC, Batch XYZ with Serial Nbr. 123 brought into our "RT" StoreLoc.
- Clerk processed MIGO to do a Stock Transfer of this material to another StoreLoc. (PS). He entered in the material ABC, batch XYZ, and a bad serial number 1233. He used a 453 Movement type.
- After realizing his mistake, he processed MIGO again and processed a GI Xfer posting with a 972 movement type to get rid of the bad material/serial nbr. he had just moved to the PS StoreLoc.
- Then he tried to redo the Stock Transfer using a 453 Movement type for the material ABC, batch XYZ, and the good serial nbr. 123, but, he gets a "Deficit of BA Ret.blocked prev. 1.000 EA " error message.
- At this point, he contacts me to ask what can be done.
No matter what we try to do, we can not access this part/serial nbr. combo to move it or issue it or whatever. It is like a ghost now. You can see the serial number via IQ03, but you can not do anything with this part/serial nbr.
Help! Do I need to write an ABAP to physically delete this material/serial nbr from its batch?

Hi,
First of all, I would assume you used customized movement type 972 to 'get rid of' your material ID with wrong serial number 1233 at PS storage location. If this is the case, then this posting did not return the stock quantity from PS to your RT storage location and that why when you tried to make another posting (with correct serial number 123), an error message was popped up as you simply do not have available stock. The solution in this case are -
1)   Cancel the posting that you made previously with movement type 972. This cancellation will help return your stock (though with wrong serial number 1233) to PS storage location;
2)   Cancel the posting that you have posted to move your stock back from PS to RT (again with wrong serial number). This steps ensure the stock quantity '1' is available at RT storage location;
3)   Make another stock transfer (with correct movement type 453 and serial number 123) from RT;
4)   Delete the serial master record 1233 so that it can no longer be used.
Cheers,
HT

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

Best way to migrate existing XP SP3 partition to a virtual machine to run via Windows 8.1 as physical partition and not a vhd?

Hi I have a current XP SP3 setup have been using in a dual boot with Windows 8.1(on separate partitions on different hard drives - I think these are SATA drives) but now am thinking of migrating my XP partition preferably as a live virtual machine
to be run as a guest via Windows 8.1 as host so I don't have to do the rebooting. Also prefer this to making a VHD of my XP so can use the existing partition allocated for it rather than taking up extra space as VHD on my windows 8 (and don't want yet
to replace my xp dual boot in case it does not work so well as vhd, as I have a lot of old educational programs my kids still use on it that I don't really want to put onto my W8.1). Will also save time if I don't have to convert it to VHD first. I
also do not want to reinstall a new XP Sp3 virtual machine from scratch for same reason - will take too long to resetup -just use existing as is.
I have used VMWare player and Virtual Box in past with an old 98SE system as a virtual VHD/VPC file but VMWare workstation is paid which may be the one I need to use a physical partition but I prefer to try freeware options first.
Will Hyper-V in Windows 8.1 (I have retail PRO version of both my XP and Windows 8.1) be able to do the same as VMWare workstation? OR is there another option to run the physical XP?
The other thing with my XP setup is that the user profiles that people login with are located on a different partition E (80GB) to my XP which is on J (100GB) and most of the programs for it run from partition D (over 120GB) and the XP boot loader resides
on a partition C (2GB) (which is not the Windows8.1 partition which becomes C only when it boots, but this C drive for XP may also be having the Windows 8 boot loader and files for that -using EasyBCD to handle boot menu of W7 type boot loader).
So I need a system that can mount these other physical partitions also alongside with my XP partition when it boots up.
So what are my options for running this XP SP3 setup via Windows 8 as a guest operating system?
Also will doing this be likely to require reactivation of my existing windows XP (retail) which means I cannot then use it again if I go back to the XP dual boot at times or in case the VM setup does not work?
Also do I need to change my XP first so that it boots off its own drive rather than the C partition - and how do I set this up then using EasyBCD or windows boot repair?

HI I found I had to make physical disk offline to use in Hyper-V which I cannot do and do not want to do with all partitions - cannot choose just ones want.
So now am trying to make VM of my physical XP -and other partitions neeeded but D partition is over 127Gb so cannot use Disk2VHD.
Here is what am trying now - any other suggestions for alternate software to vmware convertor/disk2VHD maybe to do partitions over 127GB? I have posted also at VMware forums but no answer as yet.
Advice on doing a physical XPSP3 conversion to a VM for Virtual box and hyper-v ultimately
Hi I need advice as to best way to convert an existing XP Sp3 install on a physical hard drive along with other related partitions to a Virtual box VM image with aim to convert that VM image to a Hyper-V VM for use with Windows 8.1 host.
I have several C (boot ini partition), D programs, E Data, etc partitions and a current dual boot with an extra XP install I use as a backup system.
My main XP is on J drive and other XP on I drive with C drive boot ini that switches btw 2 with J set as default.
I have a D partition that is over 127 Gb so cannot use Disk2VHD which would have been easier, and it seems there is not a way to make a direct Hyper-V VM from converter but only Vmware VM?
I do not have or want to purchase as yet VMware Workstation as have W8.1 Pro that can use Hyper-V to run my XP SP3.
I seem to also have an issue with COM+ corrupted on my machine XP J drive ( It tried to reinstall the COM+ but my es.dll file won't register and I did get a failed conversion with converter when tried earlier at 94% saying VSS snapshots have
reached their limit). I think this is related to my COM+ issue which I am not sure now how to fix apart from repair install of my Xp (as I have tried repairing COM with various articles searched on google to no avail) which I may do first before
retry conversion. However my ALT XP on I drive seems to be fine with being able to browse the COM+ applications ok. SO maybe I can use that instead but it is the J drive XP I want the most (not sure if will work at reboot if I do not
hot clone it?)
I have read also the manual for converter 5.5.1 ver standalone and am not sure of a few things so if someone can guide me it would be very much appreciated.
First of all which version VM should I make image of if I later want to convert it to a Hyper-V VM image (I only have free Virtual Box latest ver, VMware Player and Hyper-V on Windows 8.1 PRo) ie: VMware workstation 10 or Vmware Player 6 or lower
ver or other? OR is there another software I should install for the conversion or later conversion to Hyper-V? I prefer to use Hyper-V over Virtual Box and Vmware Player if possible, but should these others work just as well for my Xp Sp3 existing
system as a VM in Windows 8.1? Please advise which you think is best of these?
Should I leave all configuration options off while converting and even XP licence, workgroup etc or is it most likely that I will have to reactivate my XP (retail ver) once I reboot in the VM although I am putting to run on Windows 8.1 host on exact same
hardware as my current XP in dual boot (replacing my physical copies which I don't intend to use after conversion)? Can I enter licence etc later as well?
I currently have 8 GB ram total -should I leave Xp one at max it suggests of around 3Gb ram?
I have Quad core processor -but should I make Xp Vm one dual core for when it runs on W8.1 host to allow the host some processors so can run at same time or leaving my Xp at quad core will be ok?
Network - I want to use host one as I read it is safer for obsolete XP so do I set that at start or is it better to change this later too -allowing xp to have own internet access (maybe as may need to reactivate also - don't want to call Microsoft
if can avoid it)?
If I just want to convert resulting VM to Hyper-V VM -which software to use after for this that is freeware (Virtual Box or VMware Player or Hyper-V -not sure which can do it) and do I not then install Vmware tools?
SYSPprep should I do anyway regardless of what target VM will be when configuring later, even if on same hardware machine? OR can I just boot Vm and see if boots ok first?
Anything else I should set specifically for this future use of the VM image in hyper-v?
AU

Each time that I go into edit with Photoshop Elements 8 it causes a physical dump and shuts down

Each time that I go into my Photoshop Elements 8 it causes a physical dump and shuts down. I have only used this program a few times although I have had it a few years. The first couple of times it worked fine; but now, it shuts me down each time. I have already tried unistall and reinstall. Help!

Well, can you try opening just the Photoshop Elements 8 (from the Start menu) and see if it opens Editor from Welcome Screen or not?
It it still crashes, please try couple of probable solutions as mentioned below:
Solution 1:
Close Elements.
Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.

Hyperlink - The physical location in the page

When I export the A PDF file, how do I know the physical location of the hyperlink in the output page (coordinates)
I need to export from Indesign
- Hyperlink physical location (# page & XY coordinates)
TIA

I guess I'm misunderstanding the question, then.
I don't quite understand what you're trying to accomplish with this task. How does Excel factor into this? What value is it to have a report of x and y coordinates for an Acrobat page? This sounds like something you'd need for html coding, not a print document. If so, the pages should be exported as html pages, not Acrobat pdf files, from your original. I only ask because I have a feeling you might be creating way more work or expense for yourself than you need to be. The more information you can provide, the better advice you'll probably get.
If you need a report of x and y coordinates, I'm thinking Acrobat is the wrong application. It's not really a web design app. I don't have Dreamweaver here at my office, but I seem to remember that all that information is available if you open your pages in Dreamweaver, and there may be a way of extracting a report with just what you need. You might try asking your question on the Dreamweaver forum, if that's the route that makes more sense for what you're trying to do.

Kernel panic in paticular physical location only

overview: Mac always crashes with kernel panic in particular physical location, but everywhere else it has never crashed.
In an office I recently visited, my Macbook Pro exhibited this behaviour:
when starting up, it crashed with a kernel panic (curtain falls, asks to reboot in various languages). If start up in safe mode, then it works fine. Starting up in single user mode and running fsck reported no problems. Starting up from system DVD and running disk tools repair also reports no problems. But normal startup still fails in same way. I then did a new OS install from DVD and problem persisted then as well.
note that machine is using bootcamp, and I could successfully boot into Windows in the above location.
In every other physical location I have tried, the laptop behaves normally. I cannot replicate the above behaviour anywhere else; but at the above location, it will always crash.
In the said location the computer will crash with no physical connection to anything: no power, no network cable, no peripherals.
The only thing that might be regarded as odd about the above location that I could find, is that there were a number of wireless networks visible, around 10 or 12.
Could it be that the mere presense of the wireless networks is causing the kernel panic?
Macbook Pro Intel Core 2 duo Mac OS X (10.4.8)

thanks for your post
More likely that the wireless router you are
connecting to in that location doesn't have an
upgraded firmware. Mind you, there is an upgraded
software for the MacBook Pro wireless which may
help:
http://www.apple.com/support/downloads/airportupdate20
06002.html
i don't know what wireless networks were there. It is possible there was an apple router but unlikely
If that does not help, run the hardware test that
came with your machine:
http://docs.info.apple.com/article.html?artnum=303081
yes, that is something I haven't yet done, but will be doing tonight
ANd if that does not help, call AppleCare:
http://www.apple.com/contact/phone_contacts.html
already contacted them to let them know

How to Setup a JSP to Run on Different Physical Location than OC4J Defaul

I am trying to setup a development environment for jsp application development in Oracle 9ias Release 2 for a development group. I followed the steps outlined in NOTe:167960.1 using both EM Website (creating a OC4J and editing server.xml and defau*.xml files) and DCMCTL (Doc ID: 185635.1) utility. OC4J app is coming up only partially which does not work.
Is this possible to "Setup a JSP to Run on Different Physical Location than OC4J Default Home" in Oracle 9ias Release 2 ?
Appreciate insight
Thanks
Subu

I was finally able to get it up and running... I commented out all the apple specific lines in smb.conf until I was able to successfully finish the driver copy process via the Windows driver wizard. The line in the /etc/smb.conf which was causing this weird problem was:
vfs objects = notify_kqueue,darwinacl,darwin_streams
I have no idea what this line is about. However after commenting it out the driver installation immediately started to work. I cross checked it by adding the line again and viola the problem was back - so it can be broken down to this line...
As I've found some other comments to this line in the internet I guess I will go for the smb.conf changes described in this article:
http://blog.djmnet.org/2009/02/09/macs-needing-unix-network-geekery/
Cheers
jogi4mac

Physical location of hyperlinked files when generating printed documentation from webhelp project

Hi,
I produce webhelp and the customers have requested that printed documentation is also generated from my help project so that they can have an electronic/paper version.
I have several hyperlinks in the help project, to PDF/Word files, and have found that in the printed documentation, when you click on the hyperlink, it is trying to find the document in the physical location from which the help project was created. This means that the hyperlinked documents only open on my PC because I own the physical location. Other users, particuarly our customers, end up with an error message because it is trying to find a location they do not have access to.
Does anybody know a solution to this please?

The problem with links inside PDF / Word files is that you have no control over where the files reside. Therefore you can't specify a path that will work as it depends on the physical file's location. What you could do is publish the PDFs / Word files to an online location that are accessible by a URL.

Find the Physical Location of an attachment

Hi,
One of the user's has attached a 'Test Document' in FB03/FB02 transaction. When I try to view the document (word document), it shows up. I need to know where this particular document is PHYSICALLY stored in SAP.
I tried to debug and got some indirect references, but I could not find a place where exactly this document is stored in SAP/UNIX. Even finding out a UNIX path (if it is being stored in UNIX and called by reference) would be helpful.

Srinivas,
It was a great surprise to see you in the forum.
I don't know the logical/physical location. I am trying to figure out if any of the function modules or classes gives me the reference or link to any logical or physical location.
I have debugged the SAP code, but could not find any place where the location is stored. I was ending up going to tables storing the document ID or folder ID (ex: SOFD).
Does anyone of you know if there is a way to find the logical or physical location based on the document ID or folder ID.
Ville, I don't think going to AL11 will help me in anyway without my knowing either the logical or physical location. Still, I will give it a shot and see if it is helpful.

Table name and BAPI to view/modify APO Resource capacity profile data

Please advise the table where the data of APO resource capacity profile stores and BAPI which help to extract and modify the break duration and utlization rate for a resource.
Steps to view APO resource capacity data
1. Use transaction /SAPAPO/RES01 and enter as below
Resource <Resource Name>
Location XXXX
Planning Version 000
2. On the display screen, click button "Capacity Profile" to view the
data of start, end, break duration and utilizaiton %.
Appreciate your help!!

Hi Kurt,
You can use the below tables/views in which Resource and Capacity Profile related data is stored.
Tables:
/SAPAPO/RES_INTQ - Resource Capacity Intervals
/SAPAPO/RES_INTV - Resource Capacity Intervals
/SAPAPO/RESCAP - Capacity Profile: Resource Time Capacity
/SAPAPO/RESDIM - Dimensions and Capacity of a Resource
/SAPAPO/RESDOWN - Resource Downtime
/SAPAPO/RESDOWNT - Resource Downtime
/SAPAPO/RESKEY - Reset Key for Resource to UID
Views:
/SAPAPO/V_RESVER- Resource Capacity Variants
/SAPAPO/VRESINTQ - Resource Interval of Available Capacity Quantity Model
/SAPAPO/VRESINTR - Resource Interval of Available Capacity Rate Model
BAPIs available to read:
BAPI_RSSRVAPS_GETCAPAPRO - Read Resource Capacities Profile
BAPI_RSSRVAPS_REQUESTCAPAPRO - Query: Selection of Capacities for Resource and Result Transfer
BAPI_RSSRVAPS_GETLIST - Selection of Resources
I hope this will help you to get the data which you want to read.
Regards,
Saurabh

Physical Location and BAPI BAPI_DOCUMENT_CREATE2

Similar Messages

Maybe you are looking for