PI and MSE VMware disk provisioning

Hello,
Can someone tell me if it's permitted to thin provisioning teh VMware appliance for both PI and MSE?
Tank you

I have in a lab, but will not deploy it that way in production. I even have it thick provisioned in my home lab. Remember that TAC will only support thick provisioning since that is how they configure the ova.
Sent from Cisco Technical Support iPhone App

Similar Messages

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

App-V 5 SP2 as RemoteApps and User Profile Disks with Error Error 0xc0000142

App-V packages are published as RemoteApps and User Profile Disks are used.
Similar to the problem posted
here .
Some packages are running without an error (e.g. Acrobat Reader) and some other (e.g. Notepad++) could not launch.
The result is "The application was unable to start correctly (0xc0000142). Click OK to close the Program.
If UPD is disabled, packages running before gets now the error and the non-launching apps are running now.
The post by Steve TH "App-V 5.0: On these 0xc0000142 errors and where they are coming from" give
me an idea what´s may going on. But could not find anything related in the logs.
An answer was set as solution in this
post but it´s not clear for me, how to setup the Sequencer.
8.3 is enabled on all VMs.
How to setup the sequencer and the UPD configuration to run this scenario without the error?
/vkleinerde

Hello,
First thought is just to make a copy of the prod RDS-server, sequence on it and then see how it goes?
Nicke Källén | The Knack| Twitter:
@Znackattack

Transferred hard drive from Macbook to Mac mini and now have Disk Util prob

The problem is with Disk Utility. Basically, the DU window is just blank, that is, no hard drives show up in the left hand column. Also, none of the buttons at the top are clickable, though the menu bar drop down menus work. If I use Expose to push the window off the screen and then bring it back, then sometimes it shows the hard drive, but part of it's name will be cut off. Also, if the left hand side of the window is blank, but I right click somewhere there, it will behave as if I'm right clicking on the drive's name.
I also ran Disk Utility off the Leopard install disc and that's running fine. All the drives showed up fine and I repaired permissions and repaired the disks wherever possible. I also tried trashing the DU preference (plist) file, but that didn't help. I've restarted the computer multiple times and also tried from another account and still the same problems.
Like I mentioned, I'm not sure if this problem has anything to do with the mini or switching out the drive or if it was just coincidental with the drive exchange today. I can't remember the last time I tried using Disk Utility, but I'm sure it was some time ago.
The reason I was trying to open up DU was b/c my Time Machine backup drive is not being recognized by the mini as the backup (probably somehow it was tied to the Macbook), so I wanted to reformat it and start the Time Machine back ups all over again.
Anyway, I was wondering if you anybody had any suggestions. Maybe my Disk Utility program is somehow corrupted and I could reinstall just that program somehow? It almost seems kinda like a graphics issue since the window for DU kind of looks funny (things cut off, buttons disappear, etc.).
Update: I used Pacifist to extract the Disk Utility program from the Leopard Installer and it still has the same problem.

I see. Thanks for the info. Sounds like I may have already tried what you suggested, as I mentioned in my original post that, "I've restarted the computer multiple times and also tried from another account and still the same problems."
However, I haven't created a new account and tried opening DU when logged into that account. Do you think that may make a difference?
Thanks.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

Windows Update and MSE will not update

The Windows Update and MSE on my wife's netbook will not run. I've tried making sure the BITS and WU are running in the Services. BITS is running but Update won't run. When I try to get it to run I get an error 1067. When I try to run update I get the Update
in not running message. When I try to update MSE I get an error 0x80080005.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-FJT32-QMPGB-GCFF6
Windows Product Key Hash: KGSsbuo1+06XJlvCBpYnFCqWv54=
Windows Product ID: 00342-OEM-8992752-30004
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.011
ID: {76BA4188-6989-4312-891C-65EFCE4499D4}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Starter
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{76BA4188-6989-4312-891C-65EFCE4499D4}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.011</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-GCFF6</PKey><PID>00342-OEM-8992752-30004</PID><PIDType>2</PIDType><SID>S-1-5-21-2535747627-2150558150-2755165369</SID><SYSTEM><Manufacturer>Acer</Manufacturer><Model>AOD257</Model></SYSTEM><BIOS><Manufacturer>INSYDE</Manufacturer><Version>V1.14</Version><SMBIOSVersion
major="2" minor="6"/><Date>20110922000000.000000+000</Date></BIOS><HWID>B8970100018400E4</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>ACRSYS</OEMID><OEMTableID>ACRPRDCT</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product
GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>7480B9502DF0D86</Val><Hash>oYWOW5ayFE3pZ+jvTpuXYsY64JE=</Hash><Pid>89388-707-8722531-65301</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/><App
Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Starter edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 8be4a481-9b5c-4588-a5ec-5dad4b1f15da
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00342-00178-927-530004-02-1033-7601.0000-2202011
Installation ID: 017622677721141361630283562192842876556872428761495962
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: GCFF6
License Status: Licensed
Remaining Windows rearm count: 2
Trusted time: 7/3/2014 5:24:05 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: LgAAAAAAAQABAAIAAAABAAAAAwABAAEAnJ+cKQYqGLB8r/QoxPLejAzc4NhcMw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC ACRSYS
ACRPRDCT
FACP ACRSYS
ACRPRDCT
HPET ACRSYS
ACRPRDCT
BOOT ACRSYS
ACRPRDCT
MCFG ACRSYS
ACRPRDCT
WDAT INSYDE
INSYDE
SLIC ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
If someone could help me with this asap, the wife is anxious to be able to use her computer again

Hi,
Regarding Windows Update issue, please have a share with your CBS.log ( Find the log in C:\Windows\Logs\CBS\CBS.log ) and
Windowsupdate.log, and we could find the windowsupdate.log in (%windir%\Windowsupdate.log).
For Windows update troubleshooting, we might first take a look at the following articles:
Troubleshooting update issues for Microsoft Security Essentials
Troubleshoot problems with installing updates
Fix Microsoft Windows Update Issues
Best regards
Michael Shao
TechNet Community Support

I purchased a Mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

What Apple store told you they wanted $249.00 to tell what is wrong?
If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
Or you can take it to a Apple Genius Bar and have them look at it for Free.
Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty

10.5.8- 10.6.4: Have to Explicitly Explicitly Eject and Reconnect TM Disk

On my Mac Pro, under 10.5, I've always had my TM disk connected via USB. I found that I could Sleep and wake the system as needed, and the TM disk would always appear on the desktop.
After upgrading to 10.6.4, I find that I have to explicitly eject the TM disk before putting the Mac to sleep, and after I wake it up, I have to cycle power on the TM disk, or otherwise explicitly reconnect it to the system. If I don't do so, unlike under 10.5, it gives me the old "disk was not ejected properly" alert box.
Is that what I should expect? Is there any way under Snow Leopard whereby I can sleep and wake the system at will without having to explicitly eject the TM disk?

Barry Hemphill wrote:
What shows in system preferences>time machine when you click on select disk?
As of right now, it shows the disk of interest and "None." However, that's after I reconnected the disk.
Real-time reporting:
* Ejecting TM Disk.
* Sleep.
* Wait.
* Wake.
* Wait.
* System Preferences -> Time Machine -> Select Backup Disk shows absolutely no options, not even the "None" icon.
* Cycling power on the USB drive, it shows up on the desktop as a generic external-USB-drive icon.
* System Preferences -> Time Machine -> Select Backup Disk shows the disk, and not the "none" mentioned earlier.
* Hitting Select Disk again now adds the "none" option.

This disk doesn't contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

As stated above. I get this when I try to resize my HD. Was having issues with BootCamp so I removed it and got this.
This disk doesn’t contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

the same problem...
any help?

10.2.8 installation and external hard disk does not show on desktop

I just reinstalled OS X 10.2 (by erasing the hard disk during installation) and upgraded with the Combo pack to 10.2.8 . This is an iMac G4 1GHz with a 17-inch display. I tried connecting a Western Digital MyBook with 500Gb through both the USB port and through FireWire. In both cases the hard drive does not appear on the desktop BUT does appear in the Disk Utility program and in the System Information window. Finder, therefore, doesn't display the drive. The MyBook drive is formatted to Windows FAT 32. Before I reinstalled OS X 10.2.8, this machine was running 10.3.9 and the drive did appear (I'm still searching for the 10.3 disk).
Is this an issue with OS X 10.2.8? Given the drive is detected by the System Information section and by the Disk Utility, is there a way of forcing Finder to display it (and allow access)?

Sometimes I have found that I have to turn of the ext. hd and then reconnect the firewire cables. there is a cylinder that is an inch away from one of the firewire plugs, which should be connected toward the tower and the other firewire plug toward the ext. hd. have patience, sometimes it will show up. also a restart maybe...

I installed Lion online and i ran disk repair and found that i needed to do a repair but i have no start up disk. How do i repair without burning a disk?

I installed Lion online and i ran disk repair and found that i needed to do a repair but i have no start up disk. How do i repair without burning a disk?

Lion creates a Recovery partition on your harddrive. You will need to boot from startup.
click here
http://support.apple.com/kb/HT4718

SuperDrive - Archive and Install/Repair Disk/Permissions Unavailable

Was told by an Apple "Genius" that an Archive and Install would fix the problem I am having with my MBA (shuts down while booting after performing the 10.5.4 update), but that it would take at "least a day or two" for them to fix it so I took it home.
Tried booting to the MBA System Discs and a Leopard disk from the Superdrive, and with both clicking the "Options" button before the install, which on every other Mac displays the "Erase and Install" and "Archive and Install" options, the MBA goes straight to "How would you like to format your drive, Extended or Ext. Journaled" and that is all. The other options do not even appear even though there is at least 40gb available on the drive.
Tried running the DiskUtility from both discs and they only let me Verify Disk and Verify Permissions, both Repairs are greyed out. Both verifications fail without the ability to repair.
I purchased the SD for exactly such a situation thinking it would be easier though it seems that it is for convenience only and of no other actual assistance.
I haven't checked out the Remote Disc though I would not at all be surprised that these features (Archive/Repair) are only accessible through it. Can't wait to try it through my B network.
Anyone know if anything like this is normally possible through the SuperDrive?
Verify Disk reports:
Invalid Node structure
Volume Check failed
Verify Failed
And while typing this, the drive is no longer mountable and reports, "Try running First Aid on it".... how lovely.
Well, I would like to know, at least, if anyone else has experienced any similar problems. Erase and Install is the last thing I want to do, but if that doesn't work than I'm taking it back in. Sounds like the drive itself is damaged.
Message was edited by: Mikey U.

Have you tried booting from single user mode and running a fsck command?

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

PI and MSE VMware disk provisioning

Similar Messages

Maybe you are looking for