PI Basis 2006_1_700

Hi,
In my Solution manager 7.0 system PI_Basis 2005_1_700 is installed. To go to PI Basis 2006_1_700 do i need to do upgrade or installation of PI Basis 2006_1_700 through SAINT.
Thanks,
Rohan

Hi Rohan
In my Solution manager 7.0 system PI_Basis 2005_1_700 is installed. To go to PI Basis 2006_1_700 do i need to do upgrade or installation of PI Basis 2006_1_700 through SAINT
You can directly apply 2006_1_700 through SAINT, check the pre-requestic of that.
Check these notes may help you
Note:1245992
Note 608277 - SAP Solution Manager content add-ons
Regards
Uday

Similar Messages

Upgrade to PI_BASIS, 2006_1_700

I need to load support pack SAPKW0015, a prerequisite is to upgrade to PI BASIS 2006_1_700. When i try to do the upgrade i get a message that SAPKIPYM05 is a prerequisite. I cannot find support pack SAPKIPYM05 but only SAPKIPYM01 - 04.
Please help

Yes Paul u r right that we cannot find support pack SAPKIPYM05 but only SAPKIPYM01 - 04.
This is the reason for it: All corrective software packages, for SAP NetWeaver 2004s and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer.
U can't do it through download manager directly. Also , it is not showing SAPKW0015 support package in
service market place.
I think u have to configure the maintenance optimizer for it .
Check here for more details: https://websmp105.sap-ag.de/solman-mopz (needs userid & password).
Award point if helpful.
Edited by: abinash sahu on Feb 25, 2008 10:04 AM

Message no. RSAOLTP073

Hello everyone!!!
Does anybody knows what the message "PI-Release 80SD_C03 for the DataSource DM is not suitable for existing link DATA" means?
I have this BI extractor in APO and I was trying to select some data in the matchcode to filter some of the data when this message appeared.
Can anybody help me?
Regards
Angela

I'm receiving a similar error using the 0HR_PY_1 datasource:
PI-Release 620 for the DataSource 0HR_PY_1 is not suitable for existing link PI 2001_2_40B
Our BW system is at PI-Basis 2006_1_700 level 700 - BW 7.0
Our R/3 system is at PI_Basis 2006_1_620 level 0006 - ERP 4.71
There was no response to this message, but it was listed as "answered". Would you be so kind as to post the answer? I've found several threads with a similar problem, but nobody with answers.
Thanks

Basis Plug-In (PI_BASIS) 2006_1_700

Dear Experts,
right now my server having Basis Plug-In (PI_BASIS) 2006_1_700 with level 4., i need to apply SAPKW70017, one of my precondition is Basis Plug-In (PI_BASIS) 2005_1_700 with level 15., so can i install 2005 plugin?
Regards
Chandra

Hi,
Please follow the SNOTE 1118803 and implement the Attribute Change Package.
Also follow SNOTE 1119856.
Regards,
Kalainila B

Can't install PI_BASIS 2006_1_700 Patch 1~9

Dear consultant,
I have installed PI_BASIS 2006_1_700(51032426) using SAINT and I want
to install SP 1~9(KIPYM01). I uncompress all car files, but can't
select it via SPAM->PI_BASIS. What happen?

Hi Srikishan,
I don't understand. According to screenshot, I should install PI_BASIS 2006_1_700 Patch 04, right?
I have loaded all PI_BASIS patches 1~7 in import queue. Why the system shows "No valid queue for PI_BASIS 2006_1_700"?
SAP_BASIS     700     0015     SAPKB70015     SAP Basis Component
SAP_ABA     700     0015     SAPKA70015     Cross-Application Component
PI_BASIS     2006_1_700     0000          -     Basis Plug-In (PI_BASIS) 2004_1_640
ST-PI     2005_1_700     0006     SAPKITLQI6     SAP Solution Tools Plug-In
SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
SAP_AP     700     0011     SAPKNA7011     SAP Application Platform
BBPCRM     500     0011     SAPKU50011     BBPCRM
CPRXRPM     400     0014     SAPK-40014INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
SAP_BW
SAPKW70016
    PI_BASIS,2006_1_700
      SAPKIPYM04....

PI_BASIS 2006_1_700: Add-On Installation in IMPORT_PROPER

Hi Experts
We have installed ECC 6.0 on windows(Oracle 10g) environment. when i tried to import PI_BASIS 2006_1_700: Add-On Installation, it is keep on running in the phase IMPORT_PROPER from last 15 hrs
Also, in SM50 it is showing on workprocess running for long and gets terminated. also we have run SGEN after the BASIS ,ABA SP13 installation was over.
DIA 732 Running Yes 1341 SAPMS38L 000 DDIC Delete D010INC
it seems it is trying to delete D010INC this table and i scheduled the support packs in Background and the status is on hold and reason is rfc.
can anyone suggest what the problems would be..
Thanks and Regards,
Laxman

Hi,
Check the logs in SPAM also try to reimport once again. It would reslove the issue.
I assume that you have already installed the add-on component for pi_basis.
Regards,
Vamshi.

Need the note for 632429 in sap basis

my friend working in sap bw server got an error where to see the sap note this number please reply

Hi,
You need to look in service.sap.com.
You'll need to have userid & pwd for this. Check with your basis consultant to provide one for you.
Check the note details for now.
Summary
Symptom
This note concerns additions to the system switch or component upgrade, and an ADD-ON component that existed before the upgrade.
It also refers to errors in the guide or problems during the upgrade that only occurred after the guide was created.
Other terms
Add-On, ADD_ON, ADDON, ADDON_INFO, PREPARE
R/3 Enterprise
Reason and Prerequisites
You want to perform a system switch or component upgrade and have already installed an add-on component in your system.
The ADDON_INFO PREPARE phase (in the 'initialization' PREPARE module) recognized this prerequisite and this composite SAP note was created as a result.
Use the list below to check if one or more of the add-ons in the list are installed in your system.
The attached note contains other important information you require for the system switch or component upgrade.
If your system contains an add-on of an SAP software partner, the upgrade will always refer you to this note. Contact the vendor of the partner add-ons to receive additional information about the upgrade, if necessary.
Solution
This note is updated on a regular basis;
obtain the latest version before you start the upgrade.
History (LIFO) 24.04.2007 AOFTOOLS 400_710
08.12.2006 AUTOID_INT
03.11.2006 DBM 600, DBMC 100
10.10.2006 RCX 600, FCX 600, DDS 600
27.09.2006 DMIS
04.08.2006 IS-M/AMC 200
14.07.2006 NRX 306_600, 305_500
12.07.2006 OSEM 500, RCXEM 500
05.07.2006 REBK01 250, REBKXL 100, REBKXL 470
30.06.2006 FINBASIS, SEM-BW
12.04.2006 AOFTOOLS 351, 400
13.03.2006 BANK-ALYZE
06.03.2006 EA-IPPE
02.03.2006 KJCHM 601
24.02.2006 BI_CONT 353, 702, 703
06.02.2006 OSEM 410, RCXEM 410
24.11.2005 IS-PS-XT 600
04.10.2005 ISREA 510
12.01.2005 SLL_PI, ST-PI 003C, ST-PI 2005_1
15.12.2004 ECC-DIMP 500, P3A V500
20.10.2004 C-CEE, HR-CEE
28.09.2004 SLL-LEG
24.06.2004 WP-PI, PI_BASIS
04.06.2004 LSOFE, ERECRUIT, WFMCORE
03.03.2004 ECC 500
16.07.2003 CSC-ABPL, HR-KR+CN
16.06.2003 BANK/CFM 463_20
16.06.2003 Release note
SAP ERP Central Component 600 (ECC 600) ADD-ON RELEASE NOTE
NRX 306_600 954621
IS-PS-XT 600 890090
KJCHM 601 921295
EA-IPPE 400 914554
REBK01 250 960415
RCX 600 973274
FCX 600 973273
DDS 600 973272
DBM 600 983872
DBMC 100 983872
SAP ERP Central Component 500 (ECC 500)
Note 700778 contains a constantly updated list of all add-ons that are integrated in ECC 500 - this note contains references to the add-on specific information for the upgrade.
ADD-ON RELEASE NOTE
NRX 305_500 924462
ISREA 510 882097
SCM_BASIS 410 753272, Section I
WP-PI 723189, 789554
C-CEE 105_500 574102
HR-CEE 105_500 776578
ECC-DIMP 500 717818
P3A V500 778122
SLL_PI 700779
ST-PI 003C 606041
ST-PI 2005_1 769519
MRSS 500 889961
EA-IPPE 300 914554
AUTOID_INT 884658, 738424
You use SCM 5.0.
ADD-ON RELEASE NOTE
OSEM 500 952165
RCXEM 500 952166
You use SCM 4.1.
ADD-ON RELEASE NOTE
OSEM 410 919794
RCXEM 410 922117
EA-IPPE 300 914554
Solution Manager 4.0
ADD-ON RELEASE NOTE
ST 310 892412
ST 320 892412
ST-SUP 310 892412
ST-SUP 320 892412
ST-SER 892412
TMWFLOW 320 892412
CPROJECTS 310_620 892412
ST-ICO 892412
Web Application Server 620
ADD-ON RELEASE NOTE
DMIS 2006_1_620 970534
DMIS_CNT 2006_1_620 970539
NetWeaver 2004
ADD-ON RELEASE NOTE
AOFTOOLS 351 736572
BI_CONT 353 774933
ERECRUIT 300 717803
DMIS 2006_1_640 970534
DMIS_CNT 2006_1_640 970539
LSOFE 300 718625
WFMCORE 110_640 718627
WP-PI 723189, 789554
SLL-LEG 300_640 754698
ST-PI 003C 606041
ST-PI 2005_1 769519
FINBASIS 300 718455
SEM-BW 400 718455
NetWeaver 2004s
ADD-ON RELEASE NOTE
AOFTOOLS 400 921103
BI_CONT 702 847019
BI_CONT 703 916834
BANK-ALYZE 50 920370
DMIS 2006_1_700 970534
DMIS_CNT 2006_1_700 970539
FINBASIS 600 852448
MDM_TECH 555_700 1024362
SEM-BW 600 852448
SLL-LEG 700 853060
SLL-LEG 710 970465
IS-M/AMC 200 965483
SAP NetWeaver 7.1 (AS ABAP)
ADD-ON RELEASE NOTE
AOFTOOLS 400 921103
R/3 Enterprise Extension Set 2.0 (R/3 47x200)
Note 625318 contains a constantly updated list of all add-ons contained in R/3 Enterprise 47x200 - this note contains references to the add-on-specific information for the upgrade.
ADD-ON RELEASE NOTE
BANK/CFM 463_20 352072, section II(8)
CSC-ABPL 606860, 159979, 640520
HR-KR+CN 159979, 549368, 535649, 351062
RBD see Note 625318
ST-PI 003C 606041
ST-PI 2005_1 769519
EA-IPPE 200 914554
Regards, Siva

Mid Month Joining-PF Basis Calculation

Hi All,
I have an emplyee whose joining is in the 3rd week of the month 23.04.2011.
His basic is 25000, 8 days working basic is 6667.
I want to restrict his PF contribution to PF at 780 his actual contri coming as 800, 12% of basic.
Here i want that system should maintain his PF as 780 not 800.
I tried marking Eligible pay Or Pf BAsis Which ever is less but of no use.
I have already gone through the Threads which suggest to go through User Exit: Override Employer Pension Basis.But it is not for PF Basis.
If any PCR is available for the same ?
Can any body guide me on the same?

Hi,
the system is working fine if the person is present in the trust the full month by selecting the Eligible Pay Or PF base pay
which ever is less.
But when it comes to joining in the end of the month say 23 or 25th of the month & the employee is present in the trust for 8 or 5 days & if i try to take the basic as 6500 although the basic is higher than 6500(actual basic 25000, ,8 days-6667),if i select the
Eligible Pay Or PF base pay which ever is less,either it doest take the 6500 consideration or it calculates PF as 208.
Puting the RT details here when Eligible Pay Or PF base pay which ever is less is selected.
/101 Total gross                                                             11,223.33
/111 EPF Basis                                                                6,666.67
/112 ESI Basis                                                                 11,223.33
/113 ESI Basis N                         26,666.67                    11,010.00
/114 HRA Basis                                                              6,666.67
/115 COA/CLA Bas                                                         9,973.33
/116 Gratuity Ba                                                            6,666.67
/117 Superannuat                                                         6,666.67
/120 Nom. ExGrat                         26,666.67                  6,666.67
/121 Nom. ExGrat                         26,666.67                6,666.67
/124 Mon Reg Inc                                                           9,973.33
/125 Mon Irr Inc                                                             1,250.00
/128 Leave Encas                                                           6,666.67
/129 Voluntary R                                                           25,000.01
/134 Annual Non-                                                          1,250.00
/136 1DSD Basis                                                             6,666.67
/137 1DSD Basis                                                             6,666.67
/138 Form 217 2(                                                           11,223.33
/139 VPF Basis                                                                6,666.67
/140 LWF Basis                                                              6,880.00
/3F1 Ee PF contr0101                                                     208.00
/3F3 Er PF contr0101                                                    245.00
/3F4 Er Pension 0101                                                   555.00
/3F5 Ee Mon PF c                                                          208.00
/3F6 Ee Ann PF c                                                           8,788.00
/3F7 EDLI contri0101                                                   3,333,335.00
/3F8 EDLI adm ch0101                                                66,667.00
/3F9 PF adm chrg0101                                                7,333,337.00
/3FA PF basis fo0101                                                 1,733.00
/3FB PF Basis fo0101                                                 6,667.00
/3FC Pension Bas0101                                                 6,667.00
/3FJ VPF basis f0101                                                 1,733.00
/3FL PF Basis fo0101                                                 6,667.00
/3I1 Deduction u                                                     8,788.00
/3I2 Gross amoun                                                     8,788.00

Animated Gif with large base image & small animated part.

Hello guys
I'm not really sure how to explain that, due to my limited English comprehansion. I will try with images.
I can easily create animated gif out of multiple layers, given each layer is identical, with small changes accuring over time.
But I yet to figure out an animated gif, that uses one large image for the base, and only small part of it is animated.
I always get the animated part working, without the large base applying across all the frames. All it does, is flashes once
the frame is reached and then moves on to being transparent, showing only the small animated part.
For example, this is a GIF made with Galaxy S4, of my friend playing with his phone, imported into PS CS6. On the Galaxy,
after I record the GIF, I can use my finder to touch, mask and freez parts I don't want to move, and leave only small, animated bit.
When I import it to PS, it shows one layer with full image, and bunch of frames with the animation part only.
http://i.imgur.com/UAiopQA.jpg
http://i.imgur.com/7XOGGV6.jpg
Problem is, once the image is open with PS, I'm not able to export it to keep it working in the same manner. Given the Samsung's
gifs are 8 to 10mb, it's hard to edit it, to make it more size friendly.
The gif clearly works the way I describe, so there is a setting or method I don't know about.
If PS is not best tool for editing GIF, what other apps would you recommand I use for it?
Thank you for the taking the time to read
best regards
Monica

This has been an ongoing issue for me since I switched from Powerpoint to Keynote. Most of the animated gifs with transparent backgrounds that I used with Powerpoint are no longer transparent in Keynote. You may want to search for those earlier threads on this topic...
To summarize: I've had to open up my animated gifs in After Effects and use the Color Key effect to restore transparency, with mixed success.
Good luck!

Need advise on SQL Report base for APEX or jasper

Hello everyone,
I need some advise on how to approach this below report requirement. It has been bugging me for nearly 2 weeks now, and my time is running out.
Here is a simplified version of the database
Four tables: Defendant, Engagement, Service, Event.
A defendant can have more than 1 engagement, but they have only one open engagement at a time.
For each engagement, they will have services and events.
These events can be just general events or events that relates to the service.
Here is the script for the tables and sample data
CREATE TABLE "DEFENDANT"
   ("DEF_ID" NUMBER,
     "FIRST_NAME" VARCHAR2(50 BYTE),
     "LAST_NAME" VARCHAR2(50 BYTE),
     "ACTIVE" NUMBER DEFAULT 1
Insert into DEFENDANT (DEF_ID,FIRST_NAME,LAST_NAME,ACTIVE) values (1,'Joe','Bloggs',1);
Insert into DEFENDANT (DEF_ID,FIRST_NAME,LAST_NAME,ACTIVE) values (2,'John','Doe',1);
CREATE TABLE "ENGAGEMENT"
   ("ENG_ID" NUMBER,
     "DEF_ID" NUMBER,
     "COURT_NAME" VARCHAR2(20 BYTE),
     "DATE_JOINED" DATE,
     "DATE_TERMINATED" DATE,
     "ETHNICITY" VARCHAR2(50 BYTE),
     "ACTIVE" VARCHAR2(20 BYTE)
Insert into ENGAGEMENT (ENG_ID,DEF_ID,COURT_NAME,DATE_JOINED,DATE_TERMINATED,ETHNICITY,ACTIVE) values (1,1,'AAA',to_date('01/09/12','DD/MM/RR'),to_date('20/09/12','DD/MM/RR'),'European','1');
Insert into ENGAGEMENT (ENG_ID,DEF_ID,COURT_NAME,DATE_JOINED,DATE_TERMINATED,ETHNICITY,ACTIVE) values (2,2,'BBB',to_date('01/10/12','DD/MM/RR'),null,'Asian','1');
Insert into ENGAGEMENT (ENG_ID,DEF_ID,COURT_NAME,DATE_JOINED,DATE_TERMINATED,ETHNICITY,ACTIVE) values (3,1,'AAA',to_date('22/09/12','DD/MM/RR'),null,'European','1');
CREATE TABLE "EVENT"
   ("EVENT_ID" NUMBER,
     "ENG_ID" NUMBER,
     "NOTES" VARCHAR2(20 BYTE),
     "RELATED_SERVICE_ID" NUMBER,
     "START_DATE" DATE,
     "END_DATE" DATE,
     "ACTIVE" NUMBER DEFAULT 1
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (1,1,null,1,to_date('01/09/12','DD/MM/RR'),to_date('02/09/12','DD/MM/RR'),1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (2,1,null,1,to_date('23/09/12','DD/MM/RR'),null,1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (3,1,null,2,to_date('15/10/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (4,2,null,null,to_date('02/10/12','DD/MM/RR'),null,1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (5,2,null,2,to_date('03/10/12','DD/MM/RR'),null,1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (6,3,null,null,to_date('22/09/12','DD/MM/RR'),to_date('23/09/12','DD/MM/RR'),1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (7,3,null,4,to_date('23/09/12','DD/MM/RR'),null,1);
Insert into EVENT (EVENT_ID,ENG_ID,NOTES,RELATED_SERVICE_ID,START_DATE,END_DATE,ACTIVE) values (8,2,null,null,to_date('12/10/12','DD/MM/RR'),null,1);
CREATE TABLE "SERVICE"
   (     "SERVICE_ID" NUMBER,
     "ENG_ID" NUMBER,
     "DESCRIPTION" VARCHAR2(200 BYTE),
     "DATE_STARTED" DATE,
     "DATE_TERMINATED" DATE,
     "ACTIVE" NUMBER DEFAULT 1
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (1,1,'Counselling',to_date('15/09/12','DD/MM/RR'),to_date('18/09/12','DD/MM/RR'),1);
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (2,1,'Housing',to_date('20/09/12','DD/MM/RR'),null,1);
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (3,2,'Treatment',to_date('01/10/12','DD/MM/RR'),to_date('15/10/12','DD/MM/RR'),1);
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (4,3,'Housing',null,null,1);
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (5,1,'Other',to_date('05/10/12','DD/MM/RR'),null,0);
Insert into SERVICE (SERVICE_ID,ENG_ID,DESCRIPTION,DATE_STARTED,DATE_TERMINATED,ACTIVE) values (6,2,'Treatment',to_date('16/10/12','DD/MM/RR'),null,1);****
And this is the view I am thinking to use as the base for the report
CREATE OR REPLACE FORCE VIEW "BASE_VW"
AS
SELECT Def.Def_Id,
    Def.First_Name,
    Def.Last_Name,
    Eng.Eng_Id,
    Eng.Court_Name,
    Eng.Date_Joined,
    Eng.Date_Terminated,
    Eng.Ethnicity,
    Ser.Service_Id,
    Ser.Description,
    Ser.Date_Started    AS Service_Start_Date,
    Ser.Date_Terminated AS Service_Date_Terminated,
    Ser.Active          AS Service_Active,
    Ev.Event_Id,
    Ev.Related_Service_Id,
    Ev.Start_Date,
    Ev.End_Date,
    Ev.Notes,
    ev.active AS event_active
FROM Defendant Def
LEFT OUTER JOIN Engagement Eng
ON Def.Def_Id = Eng.Def_Id
LEFT OUTER JOIN Service Ser
ON Eng.Eng_Id = Ser.Eng_Id
LEFT OUTER JOIN Event Ev
ON Ev.Eng_Id = Eng.Eng_Id;****
Requirement:
Report parameter: Start Date, End Date, Court_name
From chosen Court_name, list defendants who currently engage in the court.
For each defendant display
Section 1: Identifying Details: First Name, Last Name, Ethnicity, Date Joined Court
Section 2: All Services currently active that the defendant attend
Section 3: All Events that related to the service that the defendant attend
Section 4: All other events (don't have Related Service ID)
User must be able to download the whole report in spreadsheet or PDF format.
I did try to create a set of union selects (but the format is not that good, when no data return it display nothing, I would rather show some messages like "There is no associated events, rather than nothing")
and it only produces report for 1 defendant at a time.
We use Oracle APEX , so only select statement or PL/SQL Code return select statement is valid for report source.
In our place we use Jasper Report adjacent to APEX, but I have very little experience with Jasper report.
The developer who knows a lot about jasper report is too busy to help me.
Currently, I use union selects like below:
With Current_Engagement As
( Select Eng_Id From Engagement
Where Def_Id =2
And Date_Joined Is Not Null
And ( Date_Terminated Is Null Or Date_Terminated > Sysdate)
And Rownum =1
Select '1.Defendant ID' as col1, 'First Name' as col2, 'Last Name' as col3, 'Court Name' as col4, 'Ethnicity' as col5, 'Date Joined' as col6, 'Date Terminated' as col7
From Dual
Union All
Select Distinct to_char(Def_Id), First_Name, Last_Name, Court_Name, Ethnicity, to_char(Date_Joined), to_char(Date_Terminated)
From Base_Vw Inner Join Current_Engagement Ce On Base_Vw.Eng_Id = Ce.Eng_Id
Union All
select '2.Service ID', 'Service Description', 'Start Date', 'End Date', Null, Null, Null
from dual
Union All
Select distinct to_char(service_id), description, to_char(service_start_date), to_char(service_date_terminated), null, null, null
From Base_Vw Inner Join Current_Engagement Ce On Base_Vw.Eng_Id = Ce.Eng_Id
where service_active =1
Union All
Select '3.Event ID', 'Related Service ID', 'Start Date', 'End date', 'Notes', null, null
From Dual
Union All
Select distinct to_char(event_id), to_char(related_service_id), to_char(start_date), to_char(end_date), notes, null, null
from Base_Vw Inner Join Current_Engagement Ce On Base_Vw.Eng_Id = Ce.Eng_Id
Where Event_Active = 1
and related_service_id is not null
Union All
Select '4.Event ID', 'Start Date', 'End date', 'Notes', null, null, null
From Dual
Union All
Select distinct to_char(event_id), to_char(start_date), to_char(end_date), notes, null, null, null
From Base_Vw Inner Join Current_Engagement Ce On Base_Vw.Eng_Id = Ce.Eng_Id
Where Event_Active = 1
and related_service_id is nulland the result is kind of what I try to achieve (except that I need to work on display a message 'No data found' rather than nothing), But it seems that my code works only for one defendant.
COL1                           COL2                           COL3                           COL4                 COL5                 COL6        COL7
1.Defendant ID                 First Name                     Last Name                      Court Name           Ethnicity            Date Joined Date Terminated
2                              John                           Doe                            BBB                  Asian                01/10/12
2.Service ID                   Service Description            Start Date                     End Date
3                              Treatment                      01/10/12                       15/10/12
6                              Treatment                      16/10/12
3.Event ID                     Related Service ID             Start Date                     End date             Notes
5                              2                              03/10/12
4.Event ID                     Start Date                     End date                       Notes
4                              02/10/12
8                              12/10/12
10 rows selected
     However, I struggle to find a way to apply this to more than 1 defendant and still keep the format.
Defendant 1
All details related to defendant 1
Defendant 2
All details relayed to defendant 2
Defendant n
All details relayed to defendant nIs it possible to display a report as above by using only SQL script ?
Thanks a lot in advance. I am willing to compensate financially to someone who can give me a solution.
Edited by: Ann586341. View base_vw SQL script is fixed.

Thanks a lot Jeneesh. (You are really a guru.)
It is nearly 98% what the requirements ask for.
I just have one more question.
If I add more information into the database, just one more defendant
Insert into DEFENDANT (DEF_ID,FIRST_NAME,LAST_NAME,ACTIVE) values (3,'Minnie','Mouse',1);
--and one in Engagement table
Insert into ENGAGEMENT (ENG_ID,DEF_ID,COURT_NAME,DATE_JOINED,DATE_TERMINATED,ETHNICITY,ACTIVE) values (4,3,'BBB',to_date('05/10/12','DD/MM/RR'),null,'Latin America','1');Then I run the select statment again (without changing anything)
With Current_Engagement As
( Select Eng_Id
From Engagement
Where /*Def_Id =2
And*/ Date_Joined Is Not Null
And ( Date_Terminated Is Null Or Date_Terminated > Sysdate)
--And Rownum =1
titles as
( Select .9 dummy_rn,'1.Defendant ID' as col1, 'First Name' as col2, 'Last Name' as col3,
    'Court Name' as col4, 'Ethnicity' as col5, 'Date Joined' as col6,
    'Date Terminated' as col7
From Dual
union all
select 1.9,'2.Service ID', 'Service Description', 'Start Date', 'End Date',
    Null, Null, Null
from dual
union all
Select 2.9,'3.Event ID', 'Related Service ID', 'Start Date', 'End date', 'Notes',
    null, null
From Dual
Union All
Select 3.9,'4.Event ID', 'Start Date', 'End date', 'Notes', null, null, null
From Dual
all_titles as
( select dummy_rn,eng_id,col1,col2,col3,col4,col5,col6,col7
from current_engagement,titles
select col1,col2,col3,col4,col5,col6,col7
from (
      select dummy_rn,eng_id,col1,col2,col3,col4,col5,col6,col7
      from all_titles
      Union All
      Select Distinct 1,ce.eng_id,decode(Base_Vw.Eng_Id,null,'No Data',to_char(Def_Id)) def_id,
                      decode(Base_Vw.Eng_Id,null,'No Data',First_Name) First_Name,
                      decode(Base_Vw.Eng_Id,null,'No Data',last_Name) Last_Name,
                      decode(Base_Vw.Eng_Id,null,'No Data',court_Name) Court_Name,
                      decode(Base_Vw.Eng_Id,null,'No Data',ethnicity) Ethnicity,
             to_char(Date_Joined), to_char(Date_Terminated)
      From Base_Vw
              right outer join Current_Engagement Ce
              On Base_Vw.Eng_Id = Ce.Eng_Id
      Union All
      Select distinct 2,ce.eng_id,
            decode(Base_Vw.Eng_Id,null,'No Data',to_char(service_id)),
            decode(Base_Vw.Eng_Id,null,'No Data',description) ,
            decode(Base_Vw.Eng_Id,null,'No Data',to_char(service_start_date)),
            decode(Base_Vw.Eng_Id,null,'No Data',to_char(service_date_terminated)) ,
            decode(Base_Vw.Eng_Id,null,'No Data',null),
            decode(Base_Vw.Eng_Id,null,'No Data',null),
            decode(Base_Vw.Eng_Id,null,'No Data',null)
      From Base_Vw
              right outer Join Current_Engagement Ce
              On Base_Vw.Eng_Id = Ce.Eng_Id
      where service_active =1
      Union All
      Select distinct 3,ce.eng_id,
             decode(Base_Vw.Eng_Id,null,'No Data',to_char(event_id)),
             decode(Base_Vw.Eng_Id,null,'No Data',to_char(related_service_id)),
             decode(Base_Vw.Eng_Id,null,'No Data',to_char(start_date)),
             decode(Base_Vw.Eng_Id,null,'No Data',to_char(end_date)),
             decode(Base_Vw.Eng_Id,null,'No Data',notes),
             decode(Base_Vw.Eng_Id,null,'No Data',null),
             decode(Base_Vw.Eng_Id,null,'No Data',null)
      from Base_Vw
           right outer Join Current_Engagement Ce
           On Base_Vw.Eng_Id = Ce.Eng_Id
      Where Event_Active = 1
      and related_service_id is not null
      Union All
      Select distinct 4,ce.eng_id,
              decode(Base_Vw.Eng_Id,null,'No Data',to_char(event_id)),
              decode(Base_Vw.Eng_Id,null,'No Data',to_char(start_date)),
              decode(Base_Vw.Eng_Id,null,'No Data',to_char(end_date)),
              decode(Base_Vw.Eng_Id,null,'No Data',notes),
              decode(Base_Vw.Eng_Id,null,'No Data',null),
              decode(Base_Vw.Eng_Id,null,'No Data',null),
              decode(Base_Vw.Eng_Id,null,'No Data',null)
      From Base_Vw
          right outer Join Current_Engagement Ce
          On Base_Vw.Eng_Id = Ce.Eng_Id
      Where Event_Active = 1
      and related_service_id is null
order by eng_id,dummy_rn,col1
;The result is
COL1                           COL2                           COL3                      COL4                 COL5                      COL6        COL7
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
2                              John                           Doe                       BBB                  Asian                     01/10/12
2.Service ID                   Service Description            Start Date                End Date
3                              Treatment                      01/10/12                  15/10/12
6                              Treatment                      16/10/12
3.Event ID                     Related Service ID             Start Date                End date             Notes
5                              2                              03/10/12
4.Event ID                     Start Date                     End date                  Notes
4                              02/10/12
8                              12/10/12
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
1                              Joe                            Bloggs                    AAA                  European                  22/09/12
2.Service ID                   Service Description            Start Date                End Date
4                              Housing
3.Event ID                     Related Service ID             Start Date                End date             Notes
7                              4                              23/09/12
4.Event ID                     Start Date                     End date                  Notes
6                              22/09/12                       23/09/12
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
3                              Minnie                         Mouse                     BBB                  Latin America             05/10/12
2.Service ID                   Service Description            Start Date                End Date
3.Event ID                     Related Service ID             Start Date                End date             Notes
4.Event ID                     Start Date                     End date                  Notes
23 rows selected Is it possible in SQL to display it like this
COL1                           COL2                           COL3                      COL4                 COL5                      COL6        COL7
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
2                              John                           Doe                       BBB                  Asian                     01/10/12
2.Service ID                   Service Description            Start Date                End Date
3                              Treatment                      01/10/12                  15/10/12
6                              Treatment                      16/10/12
3.Event ID                     Related Service ID             Start Date                End date             Notes
5                              2                              03/10/12
4.Event ID                     Start Date                     End date                  Notes
4                              02/10/12
8                              12/10/12
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
1                              Joe                            Bloggs                    AAA                  European                  22/09/12
2.Service ID                   Service Description            Start Date                End Date
4                              Housing
3.Event ID                     Related Service ID             Start Date                End date             Notes
7                              4                              23/09/12
4.Event ID                     Start Date                     End date                  Notes
6                              22/09/12                       23/09/12
1.Defendant ID                 First Name                     Last Name                 Court Name           Ethnicity                 Date Joined Date Terminated
3                              Minnie                         Mouse                     BBB                  Latin America             05/10/12
2.Service ID                   Service Description            Start Date                End Date
No Service Found
3.Event ID                     Related Service ID             Start Date                End date             Notes
No Event Found
4.Event ID                     Start Date                     End date                  Notes
No Event FoundOr just a 'No data found' would do. I am thinking about create a dummy table which contains only one row with text "There is no data found". And so the outer join with the result, but I still cannot work out how to integrate with the condition in your select statement.
I really appreciate your help.

AS3: How to create one base class for classes loaded in multiple swfs?

Our application have 3 different modules and all use
fscommand and ExternalInterface alot. Now the problem is we are
combining all those modules, but they all will reside in different
swfs. Is there any way that they extend to same base class and its
static members have only one instance accessible by all
three?

Hi,
You can achieve this via Workshop 9.2 by using the exported Ant script for your project as follows:
-Ensure that all Jars needed to resolve com.bea.p13n.property.EntityPropertyManager (this particular class is found in weblogic92/common/p13n/lib/p13n_ejb.jar) and all referenced classes are added to the Java build path for your WebLogic EJB project (Properties->Java Build Path->Libraries)
-Export the "Workshop Ant Script" for your WebLogic EJB project (File->Export->Workshop Ant Script); this will generate a "build.xml" Ant script under your project root directory.
-Edit this default build script as follows: in the call to the "ejbgen" task within the "build" target, add the attribute: propertyFile="ejbgen.properties"
-Create a file "ejbgen.properties" under the root of your WebLogic EJB project and add the following entry:
YourSessionBeanClassName.remote.baseClass=com.bea.p13n.property.EntityPropertyManager
-Add a "<path refid="java.classpath"/>" within the "<classpath>" for the "java" task element that calls "weblogic.ejbc" (this will ensure that the p13n classes are resolved by EJBC)
Follow the instructions for executing the Ant build script found here: http://edocs.bea.com/workshop/docs92/ws_platform/ideuserguide/conUseCustomAntBuild.html
For more information on the EJBGen property file support, see: http://e-docs.bea.com/wls/docs92/ejb/EJBGen_reference.html

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Error while adding A/R credit memo base on A/R invoice using DI-API

Hi Expert,
Adding partial a/r credit memo getting error msg "Invalid value [ORIN.DocRate]"
Thanks
Rajkumar
Edited by: Rajkumar Gupta on Dec 9, 2011 3:01 AM

Hi,
You may only need to provide BaseType, BaseEntry and BaseLine when you add A/R credit memo base on A/R invoice. Omit all other fields if you include in your code.
Thanks,
Gordon

Error while deploying web role - Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe

I have Azure SDK 2.5 installed and when I try and publish my web role from VS 2013, it fails. When I manually upload the package and config through the Azure Portal I get the error: "Invalid application runtime - a runtime component
is missing:/base/x64/IISConfigurator.exe".
I have tried uninstalling and re-installing the Azure SDK with no change in the error.
Any ideas how I can troubleshoot this?

I uninstalled the SDK, and tried to create a new cloud servce using the WCF service project template. The new project still gives me the same error:
The file provided is not a valid service package. Detailed error code: WCFServiceWebRole1 Invalid application runtime - a runtime component is missing:/base/x64/IISConfigurator.exe.

Can no longer read the base station configuration

I am seting up a Airport Extreme N. I was able to read the configuration file twice with no problem. Now AirPort Utility "sees" the base station and tells me the Name, IP, Version, and AirPort ID but when I select the continue button AirPort Unitlity just sits and spins.
1) I am using the latest AirPort Utility (2007-1)
2) I have tried the 1 second reset
3) I have tried the 6 second reset
4) I have tried the reset while powering up
I see a few other threads like this but no conclusive answers.
Thanks,
Jim
Mac mini Mac OS X (10.4.9)

Found the problem (well a work-around).
If the base station restarts while my LaCie USB 1TB drive is plugged in and turned on then AirPort Utility hangs reading the configuration. If I wait until the base station is up and running to plug the USB drive in all is fine. Also AirPort Utility will crash while hung reading the configuration and I unplug the USB drive.
To be sure I tested 3 times. Totally repeatable. Total time...4.5 hours

PI Basis 2006_1_700

Similar Messages

Maybe you are looking for