PI Error calling Microsoft WCF Web Service hosted on IIS

Hi All,
I am trying to call a Microsoft WCF web service in PI (also tried soapUI) but keep getting certificate error.
I have tested the same service with Microsoft WcfTestClient and everything works..
WCF Service Setup
Service URL: https://hostname/servicename.svc
Security Mode: TransportWithMessageCredential
PI Setup 1 (Should be correct setup)
Communication Channel
Adapter Type: SOAP
Uses Configure Certificate Authentification
Uses Security Profile = Web Service Security
Receiver Agreement
Uses Security Procedure (Request) = Sign
Uses Set Timestamp
Uses Set Expiry Date = 7200
Error: Unable to resolve the '#wsuid-body-5ad10600-3c4a-11e1-c462-005056960025' URI in the signature to compute the digest.
In the SOAP message the references match
<ds:Reference URI="#wsuid-body-5ad10600-3c4a-11e1-c462-005056960025">
<SOAP:Body xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-body-5ad10600-3c4a-11e1-c462-005056960025">
Tried the following setups as well
PI Setup 2
Communication Channel
Uses Security Profile = Web Service Security
Receiver Agreement
Uses Security Procedure (Request) = Sign
Uses Set Timestamp
Uses Set Expiry Date = 7200
Error: The security protocol cannot verify the incoming message.
PI Setup 3
Communication Channel
Uses Configure Certificate Authentification
Error: Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties. This can occur if the service is configured for security and the client is not using security.
Any help would be greatly appreciated
Edited by: Christian Vilhelm Henriksen on Jan 26, 2012 10:13 AM

Found the following on Microsoft which looks similar to my problem.
http://download.microsoft.com/download/a/2/8/a2807f78-c861-4b66-9b31-9205c3f22252/dotnet35sp1readme.htm
What it says in short
To resolve this issue:
Do not sign the To header.
How do i do this in PI?

Similar Messages

Authorization error calling a XI web service from Web Dynpro

Hi all,
I'm trying to communicate to XI from a Web Dynpro application but I get an Unauthorization error (401).
I've generated a WSDL in XI and import it to web dynpro as a new Model. But when a I call the web service, the exception "Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized." appears.
I don't know how to pass the right user and password from Web Dynpro, I've tried the web service from SOAP client tools and it works fine.
I'll apreciate any help.
Regards,
Diego.

Hola mi nombre es Luis,
Creyendo que eres español te escribo en tal idioma.
He visto que a ti también te devolvía un error de autentificación 401, y que lo subsanaste, pero a mi con la solución que te dieron no me vale, ya que implemento el código que te ofrecieron para arreglarlo y ahora me da un fallo de "Server Error" poniendo en usuario y password, los correspondientes a XI.
+Request_MI_outTurnoverDetailsDisplay_MI_outTurnoverDetailsDisplay req=new Request_MI_outTurnoverDetailsDisplay_MI_outTurnoverDetailsDisplay();
wdContext.nodeRequest_MI_outTurnoverDetailsDisplay_MI_outTurnoverDetailsDisplay().bind(req);
req._setUser("username");
req._setPassword("password");+
No sé si es que ese usuario y contraseña son otros distintos.
Si pudieras ayudarme, te lo agradecería.
Un saludo, Luis

Error calling BEA Weblogic Web Service

Hi all!
We are working with SAP PI 7.0 and we have a problem when we importing the WSDL specification of a Web service. This Web service is generated automatically with WebLogic 8.1 (servicegen).
The error is:
+Cause: Unable to recognize the loaded document as valid WSDL
The value ":arrayType" is not permitted for the attribute "name" of the "QName" type in the "/schema/complexType("List")/complexContent/restriction/attribute("http://prueba.encoding.miEsquema:arrayType")" element+
We can make some changes in the WSDL to avoid this error but SAP PI can't parse the response of the Web service...
Anyone has worked before with Weblogic services?
Thanks in advance.
Best Regards,
Roberto

Hi all!
We are working with SAP PI 7.0 and we have a problem when we importing the WSDL specification of a Web service. This Web service is generated automatically with WebLogic 8.1 (servicegen).
The error is:
+Cause: Unable to recognize the loaded document as valid WSDL
The value ":arrayType" is not permitted for the attribute "name" of the "QName" type in the "/schema/complexType("List")/complexContent/restriction/attribute("http://prueba.encoding.miEsquema:arrayType")" element+
We can make some changes in the WSDL to avoid this error but SAP PI can't parse the response of the Web service...
Anyone has worked before with Weblogic services?
Thanks in advance.
Best Regards,
Roberto

Calling WCF web service from BPEL

We are getting ‘oracle.fabric.common.FabricInvocationException: Unable to invoke endpoint URI "http://<host>:<port>/services/<servicename>.svc" successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Bad response: 400 Bad Request’ error while calling a WCF web service from BPEL.
1.     Is it possible to call a WCF webservice from BPEL.
2.     The WCF service is having ‘BasicHttpBinding’ and ‘<http:NegotiateAuthentication xmlns:http="http://schemas.microsoft.com/ws/06/2004/policy/http" />’
3.     Do we need to configure the SOA WS Policy in the composite xml? If yes what properties have to be set?
Thanks!
Sandeep

Anyone has insight on this? Is it possible to call a WCF service with NTLM authentication from SOA.
Thanks!
Sandeep

Capturing the response received from the WCF web service method?

Hi,
I am trying to call a WCF web service method with input parameters in an xml file and then receive the returned output data by the web service as response into an xml file.
So far I am able to call the webservice method successfully and not sure how to capture the response data. I am able to see the response data in the tracked message event using the query expression search at the BizTalk group root.
I may be missing something simple in my orchestration(image at http://social.msdn.microsoft.com/Forums/getfile/535971) ?
Steps in my orchestration are,
1) Receive the xml file with input parameters
2) Send to webservice using WCF-BasicHttp transport type
3) Receive response from web service
4) Send to xml file
Not sure how I can have 2 receive shapes in series there. I have seen few related posts in the forum but could not resolve.
Could someone please correct me?

Hi Rachit,
Thanks for your quick response. My orchestration is similar to the one in that post. In your post at step 7, how you are able to set 'Activate property' of the receive shape to true? as its the 2nd receive shape in series.
I am unable to post any images or links at the moment. My orchestration is posted at this link http://social.msdn.microsoft.com/Forums/getfile/535971
I am able to access the above link using chrome.
Yes, I did use the Request/Response port to communicate with the web service. I
am looking to achieve similar to the one in your post.
Thanks.

Custom Timer Job to execute WCF web service error - Could not find default endpoint element that references contract

Hi,
I am currently creating custom timer job to call WCF web service to perform nighty job to update employee document library metadata. If I update regular list/library items it updates correctly on a specified interval basis. However when I try to integrate
the WCF client, it throws error shown below :
Could not find default endpoint element that references contract EmployeeServiceReference.
EmployeeServiceClient in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
I followed exact instructions Andrew Connell has provided but included my logic in execute()
public
override
void Execute(Guid
targetInstanceId)
var empClient =
new
'ServiceReference.EmployeeServiceClient();
var employee = empClient.EmployeesMethod();
I have tried all approaches to manually adding app.config settings in sharepoing web.config but still it throws the error mentioned. It seems that application config and sharepoint site config binding issue still exist and cannot be resolved.
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding
name="BasicHttpBinding_EmployeeService"
/>
</basicHttpBinding>
<netTcpBinding>
<binding
name="CustomBinding_EmployeeService">
<security>
<transport
protectionLevel="None"
/>
</security>
</binding>
</netTcpBinding>
<wsHttpBinding>
<binding
name="WSHttpBinding_EmployeeService">
<security
mode="None"
/>
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc"
binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="WSHttpBinding_EmployeeService"
/>
<endpoint
address="http://services.mycomp.com/EmployeeService.svc/soap"
binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="BasicHttpBinding_EmployeeService"
/>
<endpoint
address="net.tcp://crmapp.mycomp.com:5050/EmployeeService.svc/tcp"
binding="netTcpBinding"
bindingConfiguration="CustomBinding_EmployeeService"
contract="EmployeeServiceReference.EmployeeService"
name="CustomBinding_EmployeeService">
<identity>
<userPrincipalName
value="[email protected]"
/>
</identity>
</endpoint>
</client>
</system.serviceModel>
Will you please help resolving this issue?

Hi,
You can use any of the three approaches:-
1) Access web application's web.config programmatically in Execute() method.
http://praveenkasireddy.wordpress.com/2012/12/14/access-web-application-configuration-values-in-timer-job-sharepoint/
2) Store the configuration in xml and upload it to SharePoint document library then read from there
http://www.sharepointdynamics.net/2011/08/using-an-xml-settings-file-to-store-values-for-your-sharepoint-projects/
3) Programmatically configure a WCF endpoint.
http://msdn.microsoft.com/en-us/library/ff647110.aspx
Regards, Shruti

Problem in calling a web service hosted on tomcat from BEA WebLogic portal

Hi,
I have a wsdl file for my web service which is hosted on apache tomcat 5.5(running on port : 8080). The contents of the wsdl file are-
*<?xml version="1.0" encoding="UTF-8"?>*
*<wsdl:definitions targetNamespace="http://soa.tutorials.serg.edu" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://soa.tutorials.serg.edu" xmlns:intf="http://soa.tutorials.serg.edu" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">*
*
*<wsdl:types>*
*<schema elementFormDefault="qualified" targetNamespace="http://soa.tutorials.serg.edu" xmlns="http://www.w3.org/2001/XMLSchema">*
*<element name="getNums">*
*<complexType>*
*<sequence>*
*<element name="n" type="xsd:int"/>*
*<element name="m" type="xsd:int"/>*
*</sequence>*
*</complexType>*
*</element>*
*<element name="getNumsResponse">*
*<complexType>*
*<sequence>*
*<element maxOccurs="unbounded" name="getNumsReturn" type="xsd:int"/>*
*</sequence>*
*</complexType>*
*</element>*
*<element name="getNums2">*
*<complexType>*
*<sequence>*
*<element name="n" type="xsd:int"/>*
*<element name="m" type="xsd:int"/>*
*</sequence>*
*</complexType>*
*</element>*
*<element name="getNums2Response">*
*<complexType>*
*<sequence>*
*<element maxOccurs="unbounded" name="getNums2Return" type="xsd:int"/>*
*</sequence>*
*</complexType>*
*</element>*
*</schema>*
*</wsdl:types>*
*<wsdl:message name="getNums2Request">*
*<wsdl:part element="impl:getNums2" name="parameters"/>*
*</wsdl:message>*
*<wsdl:message name="getNumsRequest">*
*<wsdl:part element="impl:getNums" name="parameters"/>*
*</wsdl:message>*
*<wsdl:message name="getNums2Response">*
*<wsdl:part element="impl:getNums2Response" name="parameters"/>*
*</wsdl:message>*
*<wsdl:message name="getNumsResponse">*
*<wsdl:part element="impl:getNumsResponse" name="parameters"/>*
*</wsdl:message>*
*<wsdl:portType name="Echo">*
*<wsdl:operation name="getNums">*
*<wsdl:input message="impl:getNumsRequest" name="getNumsRequest"/>*
*<wsdl:output message="impl:getNumsResponse" name="getNumsResponse"/>*
*</wsdl:operation>*
*<wsdl:operation name="getNums2">*
*<wsdl:input message="impl:getNums2Request" name="getNums2Request"/>*
*<wsdl:output message="impl:getNums2Response" name="getNums2Response"/>*
*</wsdl:operation>*
*</wsdl:portType>*
*<wsdl:binding name="EchoSoapBinding" type="impl:Echo">*
*<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>*
*<wsdl:operation name="getNums">*
*<wsdlsoap:operation soapAction=""/>*
*<wsdl:input name="getNumsRequest">*
*<wsdlsoap:body use="literal"/>*
*</wsdl:input>*
*<wsdl:output name="getNumsResponse">*
*<wsdlsoap:body use="literal"/>*
*</wsdl:output>*
*</wsdl:operation>*
*<wsdl:operation name="getNums2">*
*<wsdlsoap:operation soapAction=""/>*
*<wsdl:input name="getNums2Request">*
*<wsdlsoap:body use="literal"/>*
*</wsdl:input>*
*<wsdl:output name="getNums2Response">*
*<wsdlsoap:body use="literal"/>*
*</wsdl:output>*
*</wsdl:operation>*
*</wsdl:binding>*
*<wsdl:service name="EchoService">*
*<wsdl:port binding="impl:EchoSoapBinding" name="Echo">*
*<wsdlsoap:address location="http://localhost:8080/SOATest/services/Echo"/>*
*</wsdl:port>*
*</wsdl:service>*
*</wsdl:definitions>*
I created a client from the above wsdl file using ClientGen wizard in WebLogic. This client contains the follwoing classes-
Echo.java
EchoService.java
EchoService_Impl.java
Echo_Stub.java
I created a JSP portlet and the jsp content of it is-
String url = "http://localhost:8080/SOATest/services/Echo";
Echo echo = new EchoService_Impl(url).getEcho();
getNumsResponse = echo.getNums(getNums);
I tried to call that web service from BEA weblogic portal through a JSP potlet. I got an error saying -
*<An exception [javax.xml.rpc.ServiceException: Failed to parse WSDL http://localhost:8080/SOATest/services/Echo weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- java.io.IOException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element] was thrown while rendering the content at [TestEcho.jsp].*
*javax.servlet.ServletException: javax.xml.rpc.ServiceException: Failed to parse WSDL http://localhost:8080/SOATest/services/Echo weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- java.io.IOException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:420)*
*     at jsp_servlet.__testecho._jspService(__testecho.java:112)*
*     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)*
*     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)*
*     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)*
*     Truncated. see log file for complete stacktrace*
*javax.xml.rpc.ServiceException: Failed to parse WSDL http://localhost:8080/SOATest/services/Echo weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- java.io.IOException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.wsee.jaxrpc.ServiceImpl.throwServiceException(ServiceImpl.java:174)*
*     at weblogic.wsee.jaxrpc.ServiceImpl.loadWsdlDefinition(ServiceImpl.java:485)*
*     at weblogic.wsee.jaxrpc.ServiceImpl.<init>(ServiceImpl.java:119)*
*     at edu.serg.tutorials.soa.EchoService_Impl.<init>(Unknown Source)*
*     at edu.serg.tutorials.soa.EchoService_Impl.<init>(Unknown Source)*
*     Truncated. see log file for complete stacktrace*
*weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- java.io.IOException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:313)*
*     at weblogic.wsee.wsdl.WsdlDefinitions.parse(WsdlDefinitions.java:405)*
*     at weblogic.wsee.wsdl.WsdlDefinitions.parse(WsdlDefinitions.java:391)*
*     at weblogic.wsee.wsdl.WsdlFactory.parse(WsdlFactory.java:79)*
*     at weblogic.wsee.wsdl.WsdlFactory.parse(WsdlFactory.java:66)*
*     Truncated. see log file for complete stacktrace*
*java.io.IOException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.xml.domimpl.Loader.load(Loader.java:38)*
*     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:122)*
*     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)*
*     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)*
*     at weblogic.wsee.wsdl.WsdlDefinitions.parse(WsdlDefinitions.java:405)*
*     Truncated. see log file for complete stacktrace*
*javax.xml.stream.XMLStreamException: Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:206)*
*     at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)*
*     at weblogic.xml.domimpl.Loader.load(Loader.java:112)*
*     at weblogic.xml.domimpl.Loader.load(Loader.java:73)*
*     at weblogic.xml.domimpl.Loader.load(Loader.java:35)*
*     Truncated. see log file for complete stacktrace*
*Error at Line:2, token:[OPENTAGBEGIN]All tags must be contained within a single element*
*     at weblogic.xml.babel.baseparser.BaseParser.parseProlog(BaseParser.java:417)*
*     at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:328)*
*     at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)*
*     at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)*
*     at weblogic.xml.domimpl.Loader.load(Loader.java:112)*
*     Truncated. see log file for complete stacktrace*
My web service is using soap binding. I have tested it with eclipse and other tools also. It is working well and good. But when I tried to call a web service which is created and hosted on WebLogic server(running on port : 7001), I got the correct output.
Can anyone help me out in calling a web service hosted on different server from WebLogic server.
Thanks in advance,
Tiijnar
Edited by: user8715057 on Aug 13, 2009 1:11 AM

Hi
1. The way you are invoking the WebService deployed on Tomcat server is looks suspicious. It may be valid by adding extra ?wsdl etc into the url, but still I have not seen this way to invoke the webservice.
2. So you used Weblogic ant task to generate client JARs by giving this WSDL. So looks like it generated the 4 classes (.java) and in addition any other classes for Request/Response xml objects.
3. Look at the source code of EchoService.java. It should have one default empty constructor. Internally it uses the default wsdl defined in this class. You will see another constructor that takes WSDL URL as one of the parameters (QName) etc. Echo.java is the class corresponding to the Port. In the same EchoService you should see an instance method like getEcho() something like that. This Echo.java class will have methods for all the Operations defined on this Port. So the standard code snippet we use most of the times will be like this:
EchoService myEchoService = new EchoService(); // Default it uses WSDL deployed on Tomcat at localhost:8080
Echo myEchoPort = myEchoService.getEchoPort(); // Something along these lines.
myEchoPort.xxxYYY(); // NOW this is the operation name that takes the input parameters and returns outputs defined as per the WSDL defintions. If the Input and Outputs are complex xml types, it will have corresponing .JAVA files with setters and getters.
Now if this WebService is deployed on same Tomcat but on different machine or different port, you just give the full WSDL URL with that host and port in the constructor for new EchoService(...). You may need to instantiate QName object. But look at the methods generated in EchoService.java class.
The way you are using with Impl and Stubs class may also work. I am not much famiiar with this APIs apporach. Still look at the methods generated in these classes.
Also if you latest Sun JDK 1.6, it also has one command like wsimport. Infact if you install WLS 10.3 with Sun JDK, it should have C:\beawlp103\jdk160_05\bin\wsimport command. This will also generate client jar given a WSDL URL.
Thanks
Ravi Jegga

Calling helper class that refrence to WCF web service

Hi I have a BizTalk projects that calls a helper class. now the helper class receive the message and a counter and is suppose via the class to create a login to a WCF
web service and then synchronize the message to this WCF web service.<o:p></o:p>
this is class:<o:p></o:p>
public static string SyncConcerto(XLANGMessage msg, int count)
SelectResponse select = (SelectResponse)msg[0].RetrieveAs(typeof(SelectResponse));
ConcertoService.ExternalMappingServiceClient concertoServ = new ConcertoService.ExternalMappingServiceClient();
ConcertoService.ExternalMappingItem extMapItem = new ConcertoService.ExternalMappingItem();
ConcertoService.ExternalMappingServiceResponse extLogonResp = new ConcertoService.ExternalMappingServiceResponse();
ConcertoService.ExternalMappingServiceResponse extSyncResp = new ConcertoService.ExternalMappingServiceResponse();
extLogonResp = concertoServ.Logon("*****", "******", true);
if (extLogonResp.StatusCode == 1)
if (count>0)
for (int i = 0; i < count; i++)
extMapItem.Attribute1 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.REGION_NAME;
extMapItem.Attribute2 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PROJECT_NUMBER;
extMapItem.Attribute3 = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PRODUCT_NAME;
extMapItem.ProjectName = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PROJECT_NAME;
extMapItem.ProjectMgr = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.PM_NAME;
//extMapItem.ProjectMgr = select.SelectResult.CNS_CONCERTO_PROJECTSRECORDSELECT.PM_NAME;
extMapItem.Division = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.DIVISION_NAME;
extMapItem.Subject = select.SelectResult[i].CNS_CONCERTO_PROJECTSRECORDSELECT.CUSTOMER_NAME;
extMapItemArr[i] = extMapItem;
extSyncResp = concertoServ.SynchronizeExternalAttributeData(extMapItemArr);
if (extSyncResp.StatusCode == 1)
return "sync success login success";
else
return "success login sync faild";
else if (extLogonResp.StatusCode == 2)
return "TimeOut";
return "Failed";
Now it keeps throwing exception in this line of code: ConcertoService.ExternalMappingServiceClient concertoServ = new ConcertoService.ExternalMappingServiceClient();
saying he needs a valid endpoint. but he has the app.config file already that stats his endpoint.
What am I doing wrong, since I have never done a thing like that before.
And also I can't use the WCF web service in the normal BIZTALK way due to login operation he needs to do. <o:p></o:p>
Any advice on how to continue?<o:p></o:p>

the WCF has a logon operation where I enter a user name and password, it doesn't return a session key meaning I can't send a message to the WCF WS (Biztalk is stateless) that doe's the logon operation and the synchronize operation. so I had to do it with
the helper class.
and Morten I know this is very bad practice but I don't have choice for now.
Morten another question since we are using Biztalk 2013 (New Enviroment) our BTSNTSvc.exe.config is empty:
<?xml version="1.0" ?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" />
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<probing privatePath="BizTalk Assemblies;Developer Tools;Tracking;Tracking\interop" />
</assemblyBinding>
</runtime>
<system.runtime.remoting>
<channelSinkProviders>
<serverProviders>
<provider id="sspi" type="Microsoft.BizTalk.XLANGs.BTXEngine.SecurityServerChannelSinkProvider,Microsoft.XLANGs.BizTalk.Engine" securityPackage="ntlm" authenticationLevel="packetPrivacy" />
</serverProviders>
</channelSinkProviders>
<application>
<channels>
<channel ref="tcp" port="0" name="">
<serverProviders>
<provider ref="sspi" />
<formatter ref="binary" typeFilterLevel="Full"/>
</serverProviders>
</channel>
</channels>
</application>
</system.runtime.remoting>
</configuration>
where do I insert my end point and how?

Unable to open connection to MS Access 2013 .accdb file Under WCF Web Service Project Using Windows 8.1 64bit

I am encountering the following error when trying to connect to an Access 2013 database:
The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I have Visual Studio 2013 SP3 running on Windows 8.1 64bit OS which also has Office 2013 installed (which includes MS Access 2013). My project is a WCF web service using .NET Framework 4.5.1 using any cpu as target. I have tried reluctantly
to install the older drivers as described by in the below article:
https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
and also went through the "Add Data Source" wizard in the Project menu to have the connect string automatically built. Even with the automatically built connect string I can not connect to the .accdb file from within my WCF web service.
What's odd is if I use the Database Explorer in Visual Studio it has no problem connecting the my Access file. I inspected the connect string and tried to use it as well but still get the same error. Even stranger is that I have no problem connecting
to the Access DB in an ASP.NET project on the same PC. I am also able to connect to the Access file using a simple Windows Forms application. So I'm wondering if it has something to do with trying to connect to the Access file from a WCF web service
project.
What I'd like to know is if anyone has been able to get this to work in an environment as I described above as a 64bit WCF web service project? I tried to switch my project to 32bit but when I do I get a different error which reads:
System.BadImageFormatException: Could not load file or assembly 'file:
Almost to the point of trying to get this web service project done with SQL Express but would like to know if it can be done with MS Access 2013. Any information anyone can provide to help me get past this issue is greatly appreciated. Thanks.

Have you installed the 64-bit Access driver on your machine? See
Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

Anonymous Custom WCF Web Service

Can anyone let me know how to allow a WCF web service, rolled out within a feature, to allow anonymous access?
I'm not much of a WCF guru I'm afraid.
I have the web service up and running and working. But within my test harness I can create a service reference by providing the URL to the web service ending with /MEX.
However, I have to provide a NetworkCredentials object to the ClientCredentials of the proxy. I don't want this web service to require credentials - I want it to allow completely anonymous connections. I tried allowing 'Anonymous Authentication'
within IIS but that has had no affect.
It seems that no matter how hard I try I always end up getting the error message:
The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'NTLM,Basic realm="<myWebSite>"'.
Any help/pointers greatly appreciated.
Kind regards,
Tom.

one of the problem of custom wcf service hosted in SharePoint is how to disable anonymous access:
http://social.msdn.microsoft.com/Forums/hu-HU/sharepointdevelopmentprevious/thread/e3283575-1b32-40fb-b093-9545bf378aa4 ;
However, you just have the opposite problem, have you enabled anonymous access for your web application and site?

Problem making modified WCF web service operation compatible with old client

Hi,
I am trying to make a modified version of a a WCF web service work with old clients. The method signature looks like:
[OperationContract]
itemList GetItemList(getItemList param);
I am adding elements to the "getItemList" class which should be optional. The class is generated from XSD schema with xsd.exe (this means we are using schema-first design). The new element is:
<element name="itemOwner" type="string" maxOccurs="1" minOccurs="0">      </element>
and the new generated code in the getItemList class becomes:
private string itemOwnerField;
public string itemOwner
get {return this.itemOwnerField;}
set {this.itemOwnerField = value; }
When I look at the new WSDL it has:
<xs:element name="itemOwnerField" nillable="true" type="xs:string"/>
Now I was expecting the old client to still be able to call the new client, since the new field is nillable. The client has a service reference to the old version of the web service so it uses a C# stub. When the old client tries to invoke the new service,
I get error:
The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://tempuri.org/:param. The InnerException message was 'Error in line 1 position 754. 'Element' 'itemIDField' from namespace
'http://schemas.datacontract.org/2004/07/ServerBaseAPI' is not expected. Expecting element 'itemOwnerField'.'. Please see InnerException for more details.
My interpretation is that the server side of the new service cannot deserialize the incoming message since it expects it to contain itemOwnerField. Why it that, when it is nillable according to the WSDL? What can I do to solve or work around the problem?

Hi gaor.mawell,
The nillable attribute is a special attribute in the XML Schema instance namespace that provides an interoperable way to explicitly represent a null value. The receiving end can interpret these as
null, zero, and null, respectively. There is no guarantee that a third-party deserializer can make the correct interpretation, which is why this pattern is not recommended. The
DataContractSerializer class always selects the correct interpretation for missing values. So have you tried to use the DataMember's
IsRequired property? this
DataMember's
IsRequired property tells the serialization engine whether the value of itemOwnerField must be presented in the underlying XML.
For more information, please try to refer to the this artcle:
https://msdn.microsoft.com/en-us/library/aa347792(v=vs.110).aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Issue with OSI PI WCF Web Service with wshttpbinding

Hi Experts,
System Details:
SAP MII 14 SP4
OSI PI Web Service: PITimeSeries
I am having issue when trying to call OSI PI web service using http post. it is returning status 0 when i am using exception handler in BLS.
Same web service works fine with basichttpbinding (SOAP 1.1) but with wshttpbinding (SOAP 1.2) it is giving error.
Following are Web config binding details for web service.
      <wsHttpBinding>
        <binding name="wsBinding_2011" sendTimeout="00:01:00" receiveTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false">
          <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" />
          <security mode="Message">
            <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" />
          </security>
        </binding>
      </wsHttpBinding>
I am not sure it could be the issue with passing windows credentials.
Did anybody consumed WCF web service with wshttpbinding with security mode as Message and clientCredentialType as Windows.
Also i was trying to pass MYSAPSSO2 SSO token to service in http post but first i am not sure if this is correct windows token and second which header property of service should be mapped and i am not sure that I am going into correct direction or not.
Please let me know what i am missing.
I have tried following other options and tools:
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as
                  The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per                                                                              my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Any help is appreciated.
Thanks & Regards,
Manoj Bilthare

Hi Sam,
The web service is valid following are details of testing on various tools.
SOAP UI: basichttpbinding works fine for wshttpbinding receiving Internal Server error in log and Response as The security context token is expired or is not valid.
MII Web Service Action Block: basichttpbinding works fine for wshttpbinding not able to configure url through wizard because as per my discussion with other MII experts MII does not support SOAP1.2. that is one reason for using http post.
WCF Storm: both bindings works fine (There is option to select windows authentication and Impersonation level as delegation)
WCF Test Client: Both bindings works fine
Please let me know if additional details required.
Thanks & Regards,
Manoj Bilthare

New to Web Services - need to call a HTTPS web service from PL/SQL

I am new to Web Services and need to call HTTPS web service from PL/SQL program. I am using 10g Database.
I have been reading there are 2 options -
1. UTL_HTTP - with this package its possible to call HTTPS web services
2. UTL_DBWS
Questions -
1. Is it possible to call a HTTPS web service using UTL_DBWS ? I have not been able to find any information on it.
2. Can someone point me to UTL_HTTP and UTL_DBWS examples calling a HTTPS web service ?
3. The HTTPS web service that I need to call needs username/password to connect - how will I incorporate this in the pl/sql code ?
Appreciate the help.
Cheers,
newWebServicesUser

Hi,
1. UTL_DBWS not work for https from what I understand
2. Here is a sample example:
[http://www.oracle-base.com/articles/9i/ConsumingWebServices9i.php#]
Be careful, you must change http/1.0 IN 1.1 inside package SOAP_API.
Here is an example for a prime number where the SOAP message is already construct:
CREATE OR REPLACE procedure test_ws_2
IS
http_req utl_http.req;
http_resp utl_http.resp;
request_env varchar2(32767);
response_env varchar2(32767);
begin
-- Set proxy details if no direct net connection.
UTL_HTTP.set_proxy('http://<USER>:<PASS>@10.0.2.21:8070', NULL);
UTL_HTTP.set_persistent_conn_support(TRUE);
request_env:='<?xml version="1.0" encoding="utf-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">'||
'<SOAP-ENV:Body><GetPrimeNumbers xmlns="http://microsoft.com/webservices/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'||
'<max xsi:type="xsd:int">10</max>'||
'</GetPrimeNumbers></SOAP-ENV:Body></SOAP-ENV:Envelope>';
dbms_output.put_line('Length of Request:' || length(request_env));
dbms_output.put_line ('Request: ' || request_env);
http_req := utl_http.begin_request('http://www50.brinkster.com/vbfacileinpt/np.asmx','POST', utl_http.HTTP_VERSION_1_1);
utl_http.set_header(http_req, 'Content-Type', 'text/xml; charset=utf-8');
utl_http.set_header(http_req, 'Content-Length', length(request_env));
utl_http.set_header(http_req, 'SOAPAction', '"http://microsoft.com/webservices/GetPrimeNumbers"');
utl_http.write_text(http_req, request_env);
dbms_output.put_line('');
http_resp := utl_http.get_response(http_req);
dbms_output.put_line('Response Received');
dbms_output.put_line('--------------------------');
dbms_output.put_line ( 'Status code: ' || http_resp.status_code );
dbms_output.put_line ( 'Reason phrase: ' || http_resp.reason_phrase );
utl_http.read_text(http_resp, response_env);
dbms_output.put_line('Response: ');
dbms_output.put_line(response_env);
utl_http.end_response(http_resp);
end test_ws_2;
Otherwice for testing url, i recommand you to use that function: Re: Error using UTL_HTTP over HTTPS
it's a verry helpful function when you have an error.
wrote:
When testing using UTL_HTTP, you MUST ensure that you open a new session after importing the SSL certificates into your Wallet,
as I've learned (the hard way) that existing sessions point to the wallet contents that were present when the session was opened.
If you don't realise/know this, it can cause a lot of additional frustration during testing, when you keep getting the ORA-29024 exception AFTER
you've imported the SSL certificates................. ;) 3. i think you can use that after the begin_request but not sure :
UTL_HTTP.set_authentication(r => http_req,
username => ,
password => ,
scheme => ,
for_proxy => );
Edited by: Malebodja on Oct 22, 2009 6:53 AM
Edited by: Malebodja on Oct 22, 2009 6:55 AM

ORA-29532 error when invoking SSL web services using UTL_DBWS

Web Service gurus,
The WSDL for web services is as follows -
<definitions name="Webservice" targetNamespace="http://webservice.airclic.com/">
−
<types>
−
<xs:schema targetNamespace="http://webservice.airclic.com/" version="1.0">
<xs:element name="Exception" type="tns:Exception"/>
<xs:element name="listenForEvents" type="tns:listenForEvents"/>
<xs:element name="listenForEventsResponse" type="tns:listenForEventsResponse"/>
<xs:element name="sendAuthenticationResponse" type="tns:sendAuthenticationResponse"/>
<xs:element name="sendAuthenticationResponseResponse" type="tns:sendAuthenticationResponseResponse"/>
<xs:element name="upsertTask" type="tns:upsertTask"/>
<xs:element name="upsertTaskResponse" type="tns:upsertTaskResponse"/>
−
<xs:complexType name="upsertTask">
−
<xs:sequence>
<xs:element minOccurs="0" name="task" type="tns:Task"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Task">
−
<xs:complexContent>
−
<xs:extension base="tns:PlatformObject">
−
<xs:sequence>
<xs:element minOccurs="0" name="status" type="tns:status"/>
<xs:element minOccurs="0" name="assignee" type="xs:string"/>
<xs:element minOccurs="0" name="assigneeUserId" type="xs:string"/>
<xs:element minOccurs="0" name="name" type="xs:string"/>
<xs:element minOccurs="0" name="type" type="xs:string"/>
<xs:element minOccurs="0" name="creationTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="updateTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="startTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="endTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="source" type="tns:source"/>
<xs:element minOccurs="0" name="notes" type="xs:string"/>
<xs:element minOccurs="0" name="priority" type="xs:int"/>
<xs:element minOccurs="0" name="penalized" type="xs:boolean"/>
<xs:element minOccurs="0" name="hasSLA" type="xs:boolean"/>
<xs:element minOccurs="0" name="location" type="tns:Location"/>
<xs:element minOccurs="0" name="windowStartTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="windowEndTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="signee" type="xs:string"/>
<xs:element minOccurs="0" name="signature" type="xs:base64Binary"/>
<xs:element minOccurs="0" name="customerId" type="xs:string"/>
<xs:element minOccurs="0" name="travelTime" type="xs:int"/>
<xs:element minOccurs="0" name="expirationTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="parentId" type="xs:long"/>
<xs:element minOccurs="0" name="externalTimezone" type="xs:string"/>
<xs:element minOccurs="0" name="localTimeOffset" type="xs:long"/>
<xs:element minOccurs="0" name="consignee" type="xs:string"/>
<xs:element minOccurs="0" name="assignmentWindowStartTimestamp" type="xs:long"/>
<xs:element minOccurs="0" name="assignmentWindowEndTimestamp" type="xs:long"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
−
<xs:complexType name="PlatformObject">
−
<xs:sequence>
<xs:element name="id" type="xs:string"/>
<xs:element name="externalId" type="xs:string"/>
<xs:element name="revision" type="xs:long"/>
<xs:element name="platformDateCreated" type="xs:dateTime"/>
<xs:element name="platformDateUpdated" type="xs:dateTime"/>
<xs:element name="objectName" type="xs:string"/>
<xs:element maxOccurs="unbounded" name="extendedAttributes" type="tns:ExtendedAttribute"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Location">
−
<xs:sequence>
<xs:element minOccurs="0" name="name" type="xs:string"/>
<xs:element minOccurs="0" name="description" type="xs:string"/>
<xs:element minOccurs="0" name="type" type="xs:string"/>
<xs:element minOccurs="0" name="address" type="tns:Address"/>
<xs:element minOccurs="0" name="position" type="tns:Position"/>
<xs:element minOccurs="0" name="geofenceId" type="xs:long"/>
<xs:element minOccurs="0" name="capcity" type="xs:int"/>
<xs:element minOccurs="0" name="contact" type="xs:string"/>
<xs:element minOccurs="0" name="email" type="xs:string"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Address">
−
<xs:sequence>
<xs:element minOccurs="0" name="addressLine" type="xs:string"/>
<xs:element minOccurs="0" name="addressLine2" type="xs:string"/>
<xs:element minOccurs="0" name="city" type="xs:string"/>
<xs:element minOccurs="0" name="secondaryCity" type="xs:string"/>
<xs:element minOccurs="0" name="subdivision" type="xs:string"/>
<xs:element minOccurs="0" name="postalCode" type="xs:string"/>
<xs:element minOccurs="0" name="country" type="xs:string"/>
<xs:element minOccurs="0" name="phone" type="xs:string"/>
<xs:element minOccurs="0" name="freeform" type="xs:string"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Position">
−
<xs:sequence>
<xs:element name="latitude" type="xs:double"/>
<xs:element name="longitude" type="xs:double"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="ExtendedAttribute">
−
<xs:sequence>
<xs:element name="name" type="xs:string"/>
<xs:element name="value" type="xs:anyType"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="upsertTaskResponse">
−
<xs:sequence>
<xs:element minOccurs="0" name="task" type="tns:Task"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Exception">
−
<xs:sequence>
<xs:element minOccurs="0" name="message" type="xs:string"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="listenForEvents">
−
<xs:sequence>
<xs:element minOccurs="0" name="listenParams" type="tns:ListenParams"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="ListenParams">
−
<xs:sequence>
<xs:element name="queueName" type="xs:string"/>
<xs:element name="resendLast" type="xs:boolean"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="listenForEventsResponse">
−
<xs:sequence>
<xs:element maxOccurs="unbounded" minOccurs="0" name="events" type="tns:Event"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="Event">
−
<xs:sequence>
<xs:element name="id" type="xs:string"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="AuthenticationRequestEvent">
−
<xs:complexContent>
−
<xs:extension base="tns:RequestEvent">
−
<xs:sequence>
<xs:element name="username" type="xs:string"/>
<xs:element minOccurs="0" name="password" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
−
<xs:complexType name="RequestEvent">
−
<xs:complexContent>
−
<xs:extension base="tns:Event">
−
<xs:sequence>
<xs:element name="correlationId" type="xs:string"/>
<xs:element name="response" type="tns:Response"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
−
<xs:complexType name="Response">
−
<xs:sequence>
<xs:element name="correlationId" type="xs:string"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="AuthenticationResponse">
−
<xs:complexContent>
−
<xs:extension base="tns:Response">
−
<xs:sequence>
<xs:element name="success" type="xs:boolean"/>
<xs:element name="username" type="xs:string"/>
<xs:element minOccurs="0" name="password" type="xs:string"/>
<xs:element minOccurs="0" name="firstName" type="xs:string"/>
<xs:element minOccurs="0" name="lastName" type="xs:string"/>
<xs:element minOccurs="0" name="email" type="xs:string"/>
<xs:element minOccurs="0" name="active" type="xs:boolean"/>
<xs:element minOccurs="0" name="timeZone" type="xs:string"/>
<xs:element minOccurs="0" name="group" type="xs:string"/>
<xs:element minOccurs="0" name="role" type="xs:string"/>
<xs:element minOccurs="0" name="errorCode" type="xs:string"/>
<xs:element minOccurs="0" name="errorMessage" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
−
<xs:complexType name="DispatchEvent">
−
<xs:complexContent>
−
<xs:extension base="tns:Event">
−
<xs:sequence>
<xs:element name="type" type="tns:eventType"/>
<xs:element minOccurs="0" name="previousTask" type="tns:Task"/>
<xs:element name="changeTask" type="tns:Task"/>
<xs:element minOccurs="0" name="newTask" type="tns:Task"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
−
<xs:complexType name="sendAuthenticationResponse">
−
<xs:sequence>
<xs:element minOccurs="0" name="authenticationResponse" type="tns:AuthenticationResponse"/>
</xs:sequence>
</xs:complexType>
−
<xs:complexType name="sendAuthenticationResponseResponse">
<xs:sequence/>
</xs:complexType>
−
<xs:simpleType name="status">
−
<xs:restriction base="xs:string">
<xs:enumeration value="NULL"/>
<xs:enumeration value="UNASSIGNED"/>
<xs:enumeration value="ASSIGNED"/>
<xs:enumeration value="RECEIVED"/>
<xs:enumeration value="ACCEPTED"/>
<xs:enumeration value="REJECTED"/>
<xs:enumeration value="IN_PROGRESS"/>
<xs:enumeration value="POSTPONED"/>
<xs:enumeration value="COMPLETED"/>
<xs:enumeration value="CANCELED"/>
<xs:enumeration value="CLEARED"/>
<xs:enumeration value="EXPIRED"/>
</xs:restriction>
</xs:simpleType>
−
<xs:simpleType name="source">
−
<xs:restriction base="xs:string">
<xs:enumeration value="NULL"/>
<xs:enumeration value="DISPATCH"/>
<xs:enumeration value="SYSTEM"/>
<xs:enumeration value="ENDUSER"/>
</xs:restriction>
</xs:simpleType>
−
<xs:simpleType name="eventType">
−
<xs:restriction base="xs:string">
<xs:enumeration value="TaskCreated"/>
<xs:enumeration value="TaskUpdated"/>
<xs:enumeration value="TaskAssigned"/>
<xs:enumeration value="TaskDeleted"/>
<xs:enumeration value="TaskStatusChanged"/>
<xs:enumeration value="TaskConflicted"/>
</xs:restriction>
</xs:simpleType>
</xs:schema>
</types>
−
<message name="Webservice_listenForEvents">
<part element="tns:listenForEvents" name="listenForEvents"/>
</message>
−
<message name="Webservice_sendAuthenticationResponseResponse">
<part element="tns:sendAuthenticationResponseResponse" name="sendAuthenticationResponseResponse"/>
</message>
−
<message name="Webservice_sendAuthenticationResponse">
<part element="tns:sendAuthenticationResponse" name="sendAuthenticationResponse"/>
</message>
−
<message name="Webservice_upsertTaskResponse">
<part element="tns:upsertTaskResponse" name="upsertTaskResponse"/>
</message>
−
<message name="Exception">
<part element="tns:Exception" name="Exception"/>
</message>
−
<message name="Webservice_upsertTask">
<part element="tns:upsertTask" name="upsertTask"/>
</message>
−
<message name="Webservice_listenForEventsResponse">
<part element="tns:listenForEventsResponse" name="listenForEventsResponse"/>
</message>
−
<portType name="Webservice">
−
<operation name="listenForEvents" parameterOrder="listenForEvents">
<input message="tns:Webservice_listenForEvents"/>
<output message="tns:Webservice_listenForEventsResponse"/>
<fault message="tns:Exception" name="Exception"/>
</operation>
−
<operation name="sendAuthenticationResponse" parameterOrder="sendAuthenticationResponse">
<input message="tns:Webservice_sendAuthenticationResponse"/>
<output message="tns:Webservice_sendAuthenticationResponseResponse"/>
<fault message="tns:Exception" name="Exception"/>
</operation>
−
<operation name="upsertTask" parameterOrder="upsertTask">
<input message="tns:Webservice_upsertTask"/>
<output message="tns:Webservice_upsertTaskResponse"/>
<fault message="tns:Exception" name="Exception"/>
</operation>
</portType>
−
<binding name="WebserviceBinding" type="tns:Webservice">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
<operation name="listenForEvents">
<soap:operation soapAction=""/>
−
<input>
<soap:body use="literal"/>
</input>
−
<output>
<soap:body use="literal"/>
</output>
−
<fault name="Exception">
<soap:fault name="Exception" use="literal"/>
</fault>
</operation>
−
<operation name="sendAuthenticationResponse">
<soap:operation soapAction=""/>
−
<input>
<soap:body use="literal"/>
</input>
−
<output>
<soap:body use="literal"/>
</output>
−
<fault name="Exception">
<soap:fault name="Exception" use="literal"/>
</fault>
</operation>
−
<operation name="upsertTask">
<soap:operation soapAction=""/>
−
<input>
<soap:body use="literal"/>
</input>
−
<output>
<soap:body use="literal"/>
</output>
−
<fault name="Exception">
<soap:fault name="Exception" use="literal"/>
</fault>
</operation>
</binding>
−
<service name="Webservice">
−
<port binding="tns:WebserviceBinding" name="WebservicePort">
<soap:address location="https://webservice.mp.b.airclic.com:443/webservice/product/fieldservice/v1/Webservice"/>
</port>
</service>
</definitions>
Following is the pl/sql code using UTL_DBWS
DECLARE
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_input_params UTL_DBWS.anydata_list;
soap_request xmltype;
l_result xmltype;
result_output VARCHAR2(32767);
BEGIN
l_wsdl_url := 'https://webservice.mp.b.airclic.com/webservice/product/fieldservice/v1/Webservice?WSDL';
l_namespace := 'http://webservice.airclic.com/';
dbms_output.put_line ('1');
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'Webservice');
dbms_output.put_line ('2');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'WebservicePort');
dbms_output.put_line ('3');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'sendAuthenticationResponse');
dbms_output.put_line ('4');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
dbms_output.put_line ('5');
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
dbms_output.put_line ('6');
UTL_DBWS.SET_PROPERTY(l_call,'USERNAME',<username to access wsdl>);
dbms_output.put_line ('7');
UTL_DBWS.SET_PROPERTY(l_call,'PASSWORD',<password>);
dbms_output.put_line ('8');
utl_dbws.set_property(l_call,'OPERATION_STYLE', 'document');
dbms_output.put_line ('9');
soap_request := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<ns2:sendAuthenticationResponse xmlns:ns2="http://webservice.airclic.com/">
<authenticationResponse>
<correlationId>4646735802698040711:[email protected]</correlationId>
<success>true</success>
<username>changlanih</username>
<password>abcd1234</password>
<firstName>hero</firstName>
<lastName>changlani</lastName>
<email>[email protected]</email>
<active>true</active>
<timeZone>eastern</timeZone>
<group>Northeast</group>
<role>Service Manager</role>
</authenticationResponse>
</ns2:sendAuthenticationResponse>
</S:Body>
</S:Envelope>');
l_result := UTL_DBWS.invoke ( l_call,soap_request);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
result_output := l_result.getstringval;
dbms_output.put_line('web svc output ===> ' || result_output);
END;
Following is the error from pl/sql code
1
2
3
4
DECLARE
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.IllegalAccessException: error.build.wsdl.model: oracle.j2ee.ws.common.tools.api.WsdlValidationException:
Failed to read WSDL from https://webservice.mp.b.airclic.com/webservice/product/fieldservice/v1/Webservice?WSDL:
HTTP connection error code is 401
ORA-06512: at "SYS.UTL_DBWS", line 193
ORA-06512: at "SYS.UTL_DBWS", line 190
ORA-06512: at line 20
Notes
The program fails at following line of code -
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
Web services are SSL.
The WSDL is at https location and needs username/password for access. The username/password to access WSDL are set using UTL_DBWS.SET_PROPERTY
To access the SSL site, I have imported the CA in Oracle Wallet, JVM home and JDK home.
Can anyone tell me what am I doing wrong here. I am not able to even establish connection to web service host.
This is very frustrating - Oracle has no examples on how to access a SSL Web Service (that needs authentication) from Database.
This is effecting our project deadlines ......... any help would be greatly appreciated.
Thanks.

Hi,
I presume your Web Service needs HTTP (BASIC?) Authentication.
All this needs is setting the following 2 properties, which as can be seen, you are setting....
UTL_DBWS.set_property(l_call, 'USERNAME', '<username>');
UTL_DBWS.set_property(l_call, 'PASSWORD', '<pwd>');
This should work as long as your DBWS Callout Utility was downloaded from OTN after June 2008, and it's version is atleast 10.1.3.1.
Following is a sample code snippet that was tested successfully for this :
Declare
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_result sys.XMLTYPE;
l_request sys.XMLTYPE;
BEGIN
l_service := UTL_DBWS.create_service(null);
l_call := UTL_DBWS.create_call(l_service);
UTL_DBWS.set_target_endpoint_address(l_call, 'http://xxx.oracle.com:8888/basic/MyWebService1SoapHttpPort');
UTL_DBWS.set_property(l_call, 'USERNAME', 'username');
UTL_DBWS.set_property(l_call, 'PASSWORD', 'pwd');
UTL_DBWS.set_property(l_call, 'OPERATION_STYLE', 'document');
UTL_DBWS.set_property(l_call, 'SOAPACTION_USE', 'true');
UTL_DBWS.set_property(l_call, 'SOAPACTION_URI', 'http://xxx.oracle.com:8888/basic/MyWebService1SoapHttpPort');
l_request := XMLTYPE('<Z_CENTRICITY_GET_DOCLIST
xmlns:urn="urn:sap-com:document:sap:rfc:functions">' ||
'<I_INCLUDE_OLD_VERSIONS></I_INCLUDE_OLD_VERSIONS>' ||
'<I_INSTITUTION>0001</I_INSTITUTION>' ||
'<I_PATIENT_NR>0000000181</I_PATIENT_NR>' ||
'</Z_CENTRICITY_GET_DOCLIST>');
l_result := UTL_DBWS.invoke(l_call, l_request);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line(sqlcode || ' ' || sqlerrm);
END;
Hope this helps,
Yogesh

Microsoft Reporting Web Service

I am trying to call the new Microsoft Reporting web service from
weblogic 8.1sp2. I've run the clientgen utility against the microsoft
reporting server's wsdl.
Using the generated stup classes, I keep getting an error about a
snapshotID parameter, which is not a parameter passed in the stub API.
I've attached the wsdl, java program and the soap xml with the error in
it.
Any help would be greatly appreciated.
Thanks,
Eddie
[ReportingService.wsdl]
import java.io.*;
import weblogic.webservice.context.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.holders.*;
public class TestClient1
public static void main(String args[])
FileOutputStream out_stream= null;
PrintWriter writer = null;
try
//out_stream =
// new FileOutputStream("C:/mystuff/JavaProjects8.1/java/Test/webservices/MSReportService/StackDump");
//writer = new PrintWriter(out_stream);
ReportingService_Impl rpt_srv_impl =
new ReportingService_Impl();
ReportingServiceSoap rpt_srv =
//rpt_srv_impl.getReportingServiceSoap();
rpt_srv_impl.getReportingServiceSoap("user", "password");
String reportPath = "/Chapter04/Invoice-Batch Number Report";
//String reportPath = "/Chapter04/Customer-Invoice Report";
//The rendering format for the report.
String format = "HTML4.0";
// The devInfo string tells the report viewer how to display with the report.
String devInfo =
"<DeviceInfo>" +
"<Toolbar>False</Toolbar>" +
"<Parameters>False</Parameters>" +
"<DocMap>True</DocMap>" +
"<Zoom>100</Zoom>" +
"</DeviceInfo>";
// Create an array of the values for the report parameters
ParameterValue parameters[] = new ParameterValue[2];
ParameterValue paramValue = new ParameterValue();
paramValue.setName("StartDate");
paramValue.setValue("01/01/2001");
parameters[0] = paramValue;
paramValue = new ParameterValue();
paramValue.setName("EndDate");
paramValue.setValue("01/06/2005");
parameters[1] = paramValue;
ParameterValue paramValue = new ParameterValue();
paramValue.setName("snapshotID");
paramValue.setValue("1/7/2005 10:38:21 AM");
parameters[0] = paramValue;
// Create variables for the remainder of the parameters
String historyID = null;
DataSourceCredentials credentials[] = null;
String showHideToggle = null;
String encoding;
String mimeType;
Warning warnings[] = null;
ParameterValue reportHistoryParameters[] = null;
String streamIDs[] = null;
SessionHeader sh = new SessionHeader();
SessionHeaderHolder shh = new SessionHeaderHolder();
sh.setIsNewExecution(true);
shh.setValue(sh);
ServerInfoHeaderHolder server_info_hd_hldr = new ServerInfoHeaderHolder();
Render param = new Render(reportPath, format, historyID, devInfo, parameters,
credentials, showHideToggle); //, encoding, mimeType,
//reportHistoryParameters, warnings, streamIDs);
//ServerInfoHeader server_info_header = new ServerInfoHeaderHolder(;
RenderResponse response = rpt_srv.Render(param, shh, server_info_hd_hldr);
byte report[] = response.getResult();
System.out.println(report);
catch (Exception e)
e.printStackTrace();
//if (writer != null)
// e.printStackTrace(writer);
--------------------Configuration: MSQLReportService - j2sdk1.4.1_07 WebService - <Default>--------------------
Command : "C:\j2sdk1.4.1_07\bin\java.exe" -Dweblogic.webservice.verbose=true -classpath "C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService;C:\mystuff\JavaProjects8.1\lib\CR121728_81sp2.jar;C:\mystuff\JavaProjects8.1\lib\CR120224_81sp1.jar;C:\mystuff\JavaProjects8.1\lib\weblogic.jar;C:\mystuff\JavaProjects8.1\lib\webservices.jar;C:\mystuff\JavaProjects8.1\lib\webserviceclient+ssl.jar;C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\weblogicbuild;C:\j2sdk1.4.1_07\jre\lib\rt.jar;C:\j2sdk1.4.1_07\lib\dt.jar;C:\j2sdk1.4.1_07\lib\tools.jar;C:\j2sdk1.4.1_07\jre\lib\ext\dnsns.jar;C:\j2sdk1.4.1_07\jre\lib\ext\ldapsec.jar;C:\j2sdk1.4.1_07\jre\lib\ext\localedata.jar;C:\j2sdk1.4.1_07\jre\lib\ext\sunjce_provider.jar" TestClient1
Directory : C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService

URL : http://wteadapadr01/ReportServer/ReportService.asmx
Headers :
SOAPAction: ["http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render"]
Content-Type: [text/xml]
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><env:Header><n2:SessionHeader xmlns:n2="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n2:IsNewExecution>true</n2:IsNewExecution></n2:SessionHeader></env:Header><env:Body><n1:Render xmlns:n1="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n1:Report>/Chapter04/Invoice-Batch Number Report</n1:Report><n1:Format>HTML4.0</n1:Format><n1:HistoryID xsi:nil="true"/><n1:DeviceInfo><DeviceInfo><Toolbar>False</Toolbar><Parameters>False</Parameters><DocMap>True</DocMap><Zoom>100</Zoom></DeviceInfo></n1:DeviceInfo><n1:Parameters xsi:type="n1:ArrayOfParameterValue"><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>StartDate</n1:Name><n1:Value>01/01/2001</n1:Value></n1:ParameterValue><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>EndDate</n1:Name><n1:Value>01/06/2005</n1:Value></n1:ParameterValue></n1:Parameters><n1:Credentials xsi:nil="true"/><n1:ShowHideToggle xsi:nil="true"/></n1:Render></env:Body></env:Envelope>


URL : http://wteadapadr01/ReportServer/ReportService.asmx
Response Code :500
Headers :
Date=Thu, 13 Jan 2005 21:59:37 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
X-AspNet-Version=1.1.4322
Cache-Control=private
Content-Type=text/xml; charset=utf-8
Content-Length=2882
Envelope :
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.</faultstring>
<faultactor>http://wteadapadr01/ReportServer/ReportService.asmx</faultactor>
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message msrs:ErrorCode="rsParameterTypeMismatch" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00" xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices" />
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>

java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
Detail:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message xmlns:msrs="http://www.microsoft.com/sql/reportingservices"
msrs:ErrorCode="rsParameterTypeMismatch"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices">
</Warnings>
</detail>; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1266)
at TestClient1.main(TestClient1.java:97)
Caused by: javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:313)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:290)
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1261)
... 1 more
Process completed.

This is a little late, I know. but I just spent the day
struggling with this very issue. Hopefully this can help someone
else in the future. Here's my solution...
on MX:Operation -- result="fillXML()"
then
private function fillXML(): void {
var x:XML = new
XML(wsProps.GetDatasetData.lastResult.toString());
...do what you need with your xml...
I use an XMLList node of the result as the source property
for an XMLListCollection bound to a datagrid. Let me know if you
need more help to get it working. It works like a charm now that I
figured that out. I don't know if it's a slimy hack, or not, but it
gets the job done.

PI Error calling Microsoft WCF Web Service hosted on IIS

Similar Messages

Maybe you are looking for