PI Monitor Message: "Hitherto shalt thou come, but no further". No lie :)

In attempting to troubleshoot a recent issue I attempted to use the PI Message Display Tool. This is using URL: http://<myserver>:<myport>/MessagingSystem/monitor/monitor.jsp
The initial page displays fine. I can select 'Audit Log' for a message without issue. Same is true if I select 'Message Details' on that same screen.
If, after I have selected 'Message Details' I then click the pushbuttom 'Display Message Bytes' I am redirected to another page with the error message: Hitherto shalt thou come, but no further
I can't make this stuff up.
There is one other post on the SDN where someone found the same message, but there is no post as to how one gets it and how to resolve it so the Message Bytes can be seen. [See Here|invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error;
I'm guessing its a security or config thing I need to get Basis involved in to resolve, but need to give them more specific details. Anyone seen this before?
Thanks!

Hello,
This functionality is hidden for your release.
This can be referred from note 1419607.
The payload content view of the messaging system monitor is protected by
web role (UME action) "content" of application com.sap.aii.af.ms.app.
Previously, anyone with the standard monitor user role was able to view
not only the message headers but also the message payload contents that
may contain business sensitive information.
But if you still want to use this tool and to view the message payload,
the logged in user needs to have a role which is assigned the
UME action "content" of the com.sap.aii.af.ms.app as mentioned in the
note.
We recommend customers using the officially supported Message Monitoring
tool in RWB.
Kind regards,
Sarah

Similar Messages

I am trying to sync my iPhone iMessages to my MacBook Air using my phone number rather than my email address as my messages on my phone come through to my phone number. My husband has been able to set it up, accidentally I think, but I can't seem to.

I am trying to sync my iPhone iMessages to my MacBook Air using my phone number rather than my email address as my messages on my phone come through to my phone number and not my email address. My husband has been able to set it up, accidentally I think, but I can't seem to.

how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US

Trying to open a 400mb mp4 file in Quicktime but message (OSStatus error -12848) comes up, can someone help?

Trying to open a 400mb mp4 file in Quicktime but message (OSStatus error -12848) comes up, can someone help?

Try VLC: VLC for MacOS X

HT1277 I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?

I have my Yahoo Mail "poped" over to Apple Mail. I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?

Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
I hope that helps.

How to monitor message in BPM?

Hi all
I try to find in forums but I did not find. Could you please to guide me how I can to see message content in each step in BPM.
Thanks and Regards
Park

Hi park,
To monitor messages for BPM... got transaction SXMB_MONI_BPE
there u can check each step.....
hey... check the slide....also useful......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
Regards
Biplab
<i>Reward with point if useful</i>

Hi. about monitor message of integration engine from RWB.

I want to monitor message of iintegration engine from RWB.
but i can not open message content tab page and queue monitor tab page.
hint is : SSO login failed. need to logon again.
which user should i use to logon?
i tried so many user not to be able to logon successuflly.

Hi Joy,
if you want to use the SSO functionality for any component you need to maintain it first....i think u SSO configurtion is not yet done ....and hence you are getting the above error.......
Pls chk the below link....thsi is for PI 7.1...
http://help.sap.com/saphelp_nwpi71/helpdata/EN/32/1c1041a0f6f16fe10000000a1550b0/content.htm
Hope this will help..
Regds,
Pinangshuk.

How to monitor Message Bridge runtime using WLST

Hi Readers,
I would like to monitor Message Bridge runtime on weblogic 8.1 using WLST script.
Can anybody tell if there is any possibility? Is there a MBEAN avaialble for Messaging Bridge.?
Edited by: user13254842 on 09-Sep-2010 23:17

Hi,
I don't recall whether the console provides a way to monitor the bridge, or whether the MessagingBridgeRuntimeMBean hangs off of some parent mbean, but you can obtain arbitrary mbeans using standard JMX query calls.
Some scratch code that I have:
private static MBeanServerConnection getConnection(
    String urlStr,
    String username,
    String password,
    String mbeanServer
) throws Exception {
    // This code implicitly requires weblogic classes to be in the classpath
    // in order to run efficiently, but its possible to get it to work without
    // any WL at all.   See
    //   http://e-docs.bea.com/wls/docs90/jmx/accessWLS.html#1118690
    // The code could be changed to automatically detect if WL is in
    // the classpath, and switch to "iiop" mode if it isn't.
    URI url = new URI(urlStr);
    Hashtable h = new Hashtable();
    h.put(Context.SECURITY_PRINCIPAL, username);
    h.put(Context.SECURITY_CREDENTIALS, password);
    h.put(
      JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES,
      JMX_PROTOCOL_PROVIDER
    JMXServiceURL serviceURL = new JMXServiceURL(
       url.getScheme(), url.getHost(), url.getPort(), JMX_JNDI_ROOT + mbeanServe
    JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h);
    return connector.getMBeanServerConnection();
conn = getConnection(url, user, pass, "weblogic.management.mbeanservers.domainruntime")
String type = "JMSServerRuntime";    // not sure may need to add "MBean" or strip off "Runtime", bridge = "MessagingBridgeRuntime"
Set xxx =    conn.queryMBeans(new ObjectName("*:Type=" + type + ",*"), null);Hope this helps,
Tom
Edited by: TomB on Jun 10, 2009 2:57 PM

Monitor takes five minutes to come on

Monitor takes too long to come on. ON light keeps blinking for five minutes before it comes on.

I had the same problem on my MBP. I posted the same message on here and got no response. But the good news is that after about a month, it must have fixed itself because now it's an instant-on every time I open the lid, whereas when it was having the problem, about 2/3 of the time was a delay. Hope you get the same results as me or at least some help from someone knowledgeable on here.

Mail messages disappear from the Inbox, but are still in ~/Library/Mail

Folks,
I'm encountering a perplexing problem on my parent's eMac; any input would be very much appreciated...here's the story:
Over the weekend, I upgraded my Dad's 1.25GHz eMac G4 to Tiger (it had been running 10.3.9). The upgrade went smoothly, and all seemed well. I applied all the latest Apple Software Updates to get the eMac to 10.4.6, and once again, all seemed well. I performed the usual Disk Utility "permission fixing," as well, and nothing came up that seemed unusual. I did notice that I encountered the "spinning beach ball" a fair amount during routine operations, but I attributed this to the fact that the eMac only has 512MB of RAM (it's going to receive another 512 in a few days), and that I was just being impatient, given that I am accustomed to my own machine, which is a relatively snappy dual 2.5GHz G5 with the full complement of 8GB of RAM. A day or so later, Dad reported that the Mail app was not starting; upon clicking the Mail icon, it simply bounced several times, and then simply stopped bouncing. I looked at the crash logs and found that Mail could not locate a needed file/library located in /System/Library/Frameworks/SyncServices.framework. In addition, I noticed that the iCal app and the Address Book app were also crashing (the icons of each would bounce, just like Mail's, then stop, without the apps actually firing up). The crash logs revealed that those apps were also looking for this mysterious file, which apparently had somehow been misplaced/lost. I used the "Pacifist" program to reinstall the contents of that particular directory (using the Tiger install CD). Much to my relief, once that directory was reinstalled, the apps once again started up and worked normally. HOWEVER, I noticed some odd behavior with the Mail app. The first thing that became evident was that the Inbox did not show all the messages that had been there before. Looking under the ~/Library/Mail/POP-Dad's account/INBOX.mbox/Messages directory, however, it was clear that all the messages were indeed there (in the form of the individual .emlx files). They just did not seem to be displayed in the Inbox of the Mail app. I tried doing a "rebuild" of the mailbox, but this did not result in any additional messages being displayed. Any thoughts?
The other perplexing behavior is this: the Mail app on the eMac can send and receive mail, but, once you click on a newly-received (unread) message, and then go to another mail box (say, for example, the "Drafts" or "Sent" folders), and then return to the Inbox, the message that was just received is no longer displayed/listed in the Inbox. Once again, looking in the ~/Library/Mail/POP-Dad's account/INBOX.mbox/Messages directory reveals that the message IS there (again, in its own .emlx file), but is simply not being displayed in the Inbox. I can click on the individual .emlx files, and they open new windows in Mail, from which you can hit "reply" or "forward," as normal; it just won't display the actual message that was originally in the Inbox. Sent messages, however, seem to be saved/displayed normally.
I've searched through the Mail discussion forum, and while I've found discussions along generally similar lines, I have not located an entry dealing with these particular symptoms. As such, any input/suggestions would be greatly appreciated.
Thanks in advance for your time.
-Javier

Regarding the missing package that you reinstalled with Pacifist, it would have been better to fix the problem by reinstalling the Mac OS X 10.4.6 Combo Update. Actually, you're going to have to do that anyway, as the package you installed came from an older version of Mac OS X and could now be out-of-sync with the rest of the system. Not only that, but if there was something amiss with that package, chances are that something else went awry as well, so you should really reinstall the latest Combo Update. Read the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the boot volume (not just permissions) before installing the update, and no applications should be running while installing it.
As to the missing messages, the conversion from Mail 1.x to Mail 2.0 is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
If you see a strangely named Messages-XXXXXX folder within any of the *.mbox folders in the Finder, that means the conversion didn't proceed as it should, so be careful about deleting the old files, as they may contain messages that didn't come through. Better just move them out of there if you wish.
I partially disagree with Allan (and with Ernie, who also has troubleshooted a lot of similar cases and believes the old files could still be troublesome after a successful conversion as well) in that I don't think the problem with Mail 2.0 is the presence of the old files, but rather that, as a result of the improper conversion, there is something wrong with Envelope Index and with some of the converted messages themselves. IMO, the old files shouldn't be a problem if the conversion worked properly. Mail should just ignore those files when it sees a proper Messages folder in the mailbox folder.
The reason you cannot see in Mail some messages for which an *.emlx file exists is precisely that there is something wrong with Envelope Index. Mail will simply ignore any *.emlx file for which a corresponding entry does not exist in Envelope Index. Actually, Mail doesn't look into the Messages folder at all when displaying the mailbox contents, it just loads whatever there is in Envelope Index. If that information is wrong, the information displayed by Mail will be wrong as well; it may refer to messages that no longer exist, ignore messages that do exist, display one message but load a different one when you open it, etc.
Re-creating Envelope Index without cleaning up the mailboxes first would probably fail and it could even make things worse, though. That's what makes troubleshooting these issues harder than it should be.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing? Thank you in advance for your help.

Are you trying to send a message to a cell number or an email address? iPad does MMS, not SMS, meaning it can't send a message to a number. It can send a message to an email address........

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

TS4062 my ipod touch shows up in left column but i get messages like we see you but can not connect

My ipod touch shows up in the left side,but itunes can not identify my ipod.It is frozen and I can not doany tasks in itunes. my computor says my driver is good but connection test does not see a ipod . I have restarted and updated . I tried to use another computor but it says the same thing.a message about a disk comes up also. I used my ipod shuffle and it works fine! Iam going in circles trying to fix this! Help and Thanks Rileystoker

when u c the ipod under devices can u click on it?
does it show under it the following
music
flims
tv programmes
podcasts then something like
2010 music
90's music
music videos
these may not show as nothing been added or played
my top rated
recently added
recently played
top 25 played
if so simply add music, videos, etc to the ipod
it not click on the ipod tab on the top you should see
summary>apps>music>films>tv programmes>podcasts>books>photos>info>nike+ipod
you want to click on summary tab and click on the restore tab this will reset the ipod back to factory settings and let you set on the ipod again

By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If I install this sof

By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If Iinstall this software (FACEBOOK), I put as account user account that is not mine, if you change to my account, send an error and will not let medesacragarlo.As I can remove the software actaulización notice?

Hi...
I replied to you here > https://discussions.apple.com/thread/3851006?tstart=0

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy phone but the person cannot receive them; however, I can send them and it sounds like they are sent, but are not received. I can get them from a galaxy.

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!

Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W.

PI Monitor Message: "Hitherto shalt thou come, but no further". No lie :)

Similar Messages

Maybe you are looking for