PI upgrade questionnaire

Hi all,
we are moving from XI 3.0 to PI 7.1.
I need a questionnaire to ask the client.for example
1. How many interfaces are inpresent
2.What are the legacy systems involved
etc...
anyone assist me plz...
Edited by: Kumar on Feb 15, 2009 11:00 PM

Hi Kumar,
Check these useful links for the same:
Upgrade to PI 7.1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655
Sachin

Similar Messages

PI upgrade questionnaire required

Hi all,
we are moving from XI 3.0 to PI 7.1.
I need a questionnaire to ask the client.for example
1. How many interfaces are inpresent
2.What are the legacy systems involved
etc...
anyone assist me plz...
Edited by: PSRK on Feb 15, 2009 4:00 PM

Two and a half years later, you still need this?

Oracle Applications Upgrade Questionnaire

Hi,
we are planning to go for an upgrade from release 11i to 12i
I have some unclear concepts that I need to grasp about:
*Payroll hard close vs. soft close
*current organization structure with respect to payrolls
*where do i close/open the payroll accounting period from?

Please see these docs.
Purchase Order Matching Frequently Asked Questions (FAQ's) [ID 213480.1]
Purchase Order Matching Troubleshooting Guide [ID 214273.1]
How to Match Invoices to Purchase Orders White Paper [ID 198535.1]
Thanks,
Hussein

Upgrading system from 3.1c to 3.5 questionnaire

Hello All,
We are upgrading our system from 3.1c to 3.5.So can somebody please send me some upgradation Questionnaire doc for client.
Regards
Satish

Hi Satish,
Give me ur mail id, i can send u one document.
Regards,
ARK

Things to look for in SRM 7.0 upgrade.

Hello Everyone,
We are using SRM 5.0 with Extended classic scenario and we need to upgrade from SRM 5.0 to SRM 7.0.
We are going to send RFP to different vendors for this upgrade project.
As a project manager what I should ask from different vendors before the upgrade?
What things I should look for from vendors before the SRM 7.0 upgrade or what questions I should ask to different vendors before the SRM 7.0 upgrade?
Regards,
Khushbu.

Hi Khushbu ,
This are the sample basic question for SRM upgrade .
SAP SRM Upgrade Questionnaire
Basic Information
    Company / Project Name
    Current Backend SAP R/3 or ECC Version / Plug-In Version
        - OLTP Backend System 1
        - OLTP Backend System 2
        - OLTP Backend System 3
        - OLTP Backend System n
    Current SRM Release / Plug-In Version
Components in SAP SRM
Please list which of the following Components are currently implemented (Y/N) and their release versions :
a) EBP
b) SUS
c) Live Auction
d) Requisite Catalog
e) CCM
f) MDM Catalog
f) IPC
b) XI
h) Enterprise Portal
i) BW (SRM Analytics)
j) ITS
k) CRM Middleware
l) HR Integration
m) Others
If the answer to any of the above is No, Are you considering implementing additional SRM components? If so, please list the components
Do you have any of the following scenarios :
a) 1 EBP client connected to Multiple backend SAP R/3 clients
b) Multiple EBP Clients connected to Multiple backend SAP R/3 systems
SRM Scenarios currently used
Self Service Procurement
Service Procurement
Plan Driven Procurement
Contract Management
Supplier Self Services
Strategic Sourcing - RFx, Live Auction
Other SAP Solutions
   Please List R/3 or ECC Modules Currently In Use
Have you implemented SAP Supply Chain Management (APO)?
If yes, what is your current APO Version
Have you implemented Product Lifecycle Management (PLM)?
If yes, what is your current PLM Version
   Please name any other SAP Add-ons or Industry Solutions in use
Basis Information
    Database release for current backend SAP R/3 or ECC system
    Operating System release for current backend SAP R/3 or ECC System
    What is your Hardware Platforms for current backend SAP R/3 or ECC system (e.g.HP, IBM, etc.)?
How many systems are in your landscape for current backend SAP R/3 or ECC system (e.g., Development, Quality Assurance, Production, etc.)?
     How large is your current Production Database in backend SAP R/3 or ECC system (in GB)?
Current SRM Database Size?
   Database release for Current SRM system?
   What is your SRM Hardware Platforms (e.g., HP, IBM, etc.)?
What is your current OS for the different components of SRM which are in use
Please explain the complete system Landscape for SRM (Use a separate sheet, if required)
SRM Data Conversion or Replication (if any)
   Business Partners
    How many vendor records are handled in SRM ?
Product Masters
    How many product master records are there in SAP R/3 ?
    How many product master records are available in SRM ?
Legacy Systems and their Migration
Any new data migration from legacy systems
System Enhancements
Custom Developments
    Complex
    Medium
    Minor
Custom Tables
Custom Java codes (e.g in IPC)
Badi's / User Exits
Screen modifications
z-transactions
Non-SAP External Systems and Integration issues
   Have you integrated any Non-SAP External systems to SRM ?
   List of Interfaces :
   1) EBP-Business Connector-WOI (IBM Web Order Interface)
   2)
   3)
Is SRM integrated to a Third Party Tax Engine e.g Vertex, Taxware
     Are you using email servers integrated with SRM ? If yes, which email system (e.g., Lotus Notes, Outlook, etc.)?
XI (Exchange Infrastructure)
List of Interfaces
1) P.O create
2) P.O Change
3) Order Acknowledgement
4)
5)
Project Management Tools used in Project
Are you using Solution Manager ?
Other Tools used
Size of Current SAP Team and Availability of SAP Resources
      What is the size of the existing SAP SRM support team : Any Consulting / AMS Team
      What is the size of the existing SAP SRM support team : Internal Team / COE
Training Requirements
    Please Explain the User training methods used in Previous ERP or SRM implementations.
    How many Super Users, and End Users got trained during SRM 3.0 implementation?
   Do you have additional training Requirements? If so, please describe.
   What testing tools are used currently ?
Project Constraints
What are the budgetary constraints for this project?
What are the resource constraints for this project?
What are the timeline (duration) constraints for this project?
Additional Comments
Is there any plan to upgrade any of the OLTP R/3 systems in the near future
UNICODE
Are your current OLTP R/3 systems Unicode complaint
Is your current SRM system Unicode Compliant
What languages are used in the current R/3 systems
What additional languages are required in the R/3 systems
What languages are used in the current EBP system (Core)
What additional languages are required in the EBP system (Core)
What are the languages supported in the HTML layer currently
What additional languages are required in the HTML layer
Hope this will be useful to you .
Thanks & Regards
Pradeep Kumar Dondeti

ABAP Questionnaire for Upgrading from 4.6c to ECC6

Hi gurus,
I'm an ABAP developer and I'll have a project soon that will focus on the upgrade of a customers SAP system from 4.6c to ECC5. I just want to ask if you can give me a questionnaire or a guide taht will focus on the ABAP side of the upgrade. This is my first time that I will be involved in an upgrade project.
Thank you very much,
Andre

The upgrade isn't difficult at all
In ABAP you must change all the functions of files like WS_DOWNLOAD .You must use GUI_DOWNLOAD or CL_GUI_FRONTEND_SERVICESS class.
The inherited classes need that their constructor call the constructor of the father class.
In HR you have to be carefully with the casting of infotypes.
The files of the application server need encoding .The default encoding is unicode but you can deactivate using encoding non-unicode.
The syntax is more restricted.
You have a new and very good editor .A new debugger too.
Be carefully with indexes when access a field structure or similars.
In XML you must use encoding utf-8

IS-Retail Upgrade

Hi,
Is there any documentation available for IS-Retail ECC upgrade including POS, ITS ? Any check-list/questionnaire for integration with POS/ITS?
Thanks,
Mithun

Hi Mithun
IS-Retail documentation in below links.
http://help.sap.com/saphelp_erp2004/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8e/65f438c842cc2be10000000a114084/content.htm
also check the below SDN thread
IS-Retail Documents
Thanks and Regards,
Syf
Edited by: syfulla shaik on Jan 20, 2009 10:53 AM

How can we upload questionnaire to CRM 2007 during data migration activity?

Hi all,
I have an requirement where i have to upload questionnaires from an existing CRM system to SAP-CRM 2007 during data migration activity.
i just go through what are questionnaires, how we can create them and how we can assign them to transactions.
how can i upload during data migration activity ?
Thanks & Regards
Raman Khurana

Hi,
According to your post, my understanding is that the 'Upload.aspx' page was missing or corrupted from many document libraries after migration to 2010 from 2007.
Per my knowleadge, the upgrade process sets the SPWeb.CustomUploadPage property for upgraded sites to a custom upload page titled
uploadex.aspx, as opposed to upload.aspx which is the default page for file uploads. And this custom upload page contains the “Destination Folder” field.
To removes the custom upload page (uploadex.aspx) from SPWeb, and reverts back to the default upload page (upload.aspx), we can use PowerShell script to loop through all Web sites that are contained within the site collection, including the top-level site
and its subsites, and checks to see if the SPWeb.CustomUploadPage property is not equal to blank. If true, then it sets the SPWeb.CustomUploadPage property to blank.
Here is a great blog for your reference:
Destination Folder field in site upgraded from MOSS 2007 to SharePoint Server 2010
More information:
What’s This Destination Folder Field On My File Upload Page?
Best Regards,
Linda Li
Linda Li
TechNet Community Support

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Ipod touch can no longer connect to XP following Apple upgrade, HELP !

This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. Thanks

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Just upgraded HDD, now how do I get my data back??

I just upgraded my stock 60GB HD to a 120GB Seagate Momentus 5400 ($100). This is what I did:
1. Before removing the 60GB HD, i created a read-only disk image of my HD(with Disk Utility on the OSX install CD). I put this disk image on my USB external hard drive.
2. Physically replaced the 60GB with the 120GB.
3. Now, I boot up the computer to the OSX install CD (since it is a blank new HD). I open up Disk Utility on the install CD, and try to restore the image i created (on my external USB HD) to my new 120GB internal drive. I am able to select the image to restore, but cannot select my internal drive as the destination.
I have all sorts of music, movies, applications...etc. on my old HD that I want on my new drive.
I want to have my computer be identical to before I upgraded, just with a larger HD. Is this possible?
I have tons of external USB HD space to use if needed, and I also still have the old HD... if I need to create a different kind of disk image or something.
Please help!
Macbook 2.0GHz (White) Mac OS X (10.4.8)

I did this already. I failed to mention it in my first post. I have my HD "111.8 GB Seagate..." and underneath it: "Macintosh HD". Still can't restore an image to the "Macintosh HD" volume.

BSI Tax Factory Upgrade 8.0 to 9.0

Hi BSI,
We are upgrading our BSI tax Factory from 8.0 to 9.0. We are running:
Windows 2008 R2
SQL Server version 10.50.1777
I'm able to connect to the database using login TF90 through SQL Server Management Studio, the ODBC Data Source Administrator and the TaxFactory Client is connecting fine too.
But when running report RPUBTCU0 from the SAP system , its caught under ABAP dump-> SYSTEM FAILURE.
Looking at the error.txt.
=Running connect_db_taxfactory
BSI dataset -> 101
ConnectToDataSource... Starting
ConnectToDataSource...Succeeded
Connect to Dataset Error string = 101
ConnectToDataSet... Starting
ConnectToDataSet...failed
Error String -> 4020 - THERE IS NO VALID LICENSE INSTALLED FOR HOST HCA-MSAP68:UNKNOWN.
=RFC error
operation/code connect_db_payroll_tax_calc_us
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status .
The machine key is successfully installed.
Please guide what we are missing here.
Please contact me at +60123675076 (malaysia) at anytime.
Thanks.
Thava

We managed to solve this by changing tf90server.bat file.
from - I:
CD I:\BSI\Server9.0
tf90server.exe %*
To - I:\BSI\Server9.0\tf90server.exe %*
Now we could run report RPUBTCU0 without error.
Thanks.
Thava

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

About 3 weeks ago, I upgraded some MCS-7825 & MCS-7835 servers to 2000.4.4aSR6. Since then, one of the 7825's has been rebooting on its own almost twice a day. The other 7825 and 7835s are operating fine.
Anybody else encountering a problem with this? I see in the release notes, some BIOS and firmware updates are included for the 7825, and am suspecting this is the problem.

My problems actually turned out to be hardware, I think. I reviewed the logs and found out it had been happening for several months.

PI upgrade questionnaire

Similar Messages

Maybe you are looking for