Picking area-no values found?
hi all,
in material master-view plant/data stor1 input option 'Picking Area' is not showing any values though i defined warehouse number, storage type, storage sections and picking area using the path: SPRO>LE>WareHouse Management>Master Data>Define Picking Area.
Pls do suggest me on this.
regards,
chinta
Edited by: chinta on Feb 21, 2012 5:16 PM
i did the same bro... but no use...
the values are displayed in 'warehouse management tab 1' but not in ' plant data stor 1' any how i resolved it by doing this here
SPRO>LE>Shipping>Picking>Lean WM>Define control parameters and number ranges f warehouse no>define control parameters and number ranges f. warehouse no
and
SPRO>LE>Shipping>Picking>Lean WM-->Control Plant/storage location/ware houe no assignment
thats it i got the result..
thank you bro.. for your help.
thanks and regards
chinta
Similar Messages
-
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar -
Query based report to pick up the value from differences table
Hi,
I am trying to pick up the value from change log differences feild but since it is system variable i am unable to pick it.which table i should pick up to get that .
Regards-
Monica.Hi Monica,
This would be a tough job if you know the structure of the historical record tables. You need to familiar with all those A tables first. Any changes to one of the record would create a instance of the record before change. AITM is for OITM, AIT1 is for ITM1 etc. Which tables are you looking for?
Thanks,
Gordon -
Essbase members not picking up data values
Gurus,
I have some members in my JOB CODE hierarchies, such as 100, 200, 300 ETC.
Now I have added 100A, 200A, etc to the hierarchy. 100A is the sibling of 100, 200A is the sibling of 200, so forth.
Now, 100A, 200A, etc (the ones with the alphabet A is not picking up the values/percentages, while doing a pushdown.
Is it because of the ALPHANUMERIC member names?
Essbase allows such names right? or Do I need to change any setting/properties, etc like that?
Thanksthe answer is it depends. It is not Essbase itself that would not allow those member names as all member names are really text even if they look numeric. The problem could be in your script to "Push down" data. it could be doing some match based on UDA or member format. without seeing the pushdown script, I can't determine what could be your issue. It could even be a block creation issue, but who knows.
-
No values found in sxmb_moni
Hello together,
We are communicating with different sap application system over ABAP proxies.
But in the sxmb_moni on application system we can not choose any service in the selection in the xml monitor. The same result is for choosing the interface namespace.
We got no business system back from f4 help back.
This message is display:
No values found
Message no. DH801
Have you some idea, what are going wrong on the system.
Must be in the sxi_cache the status green on the application system?
Is this an authority problem?
The sldcheck works on the system and the interface also.
Have a nice weekend.
StefanHello,
I am talking from the sxmb_moni of an erp system for example.
The manually way is not the best solution, because between the systems are configured the sld communication. Over the sldcheck the erp knows all business systems.
Bye
Stefan -
ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?
found the solution: the filmstrip was to small !!!
-
Condition Type JSRT not picking Condition Base Value in Pricing Procedure
Hi Friends,
In a procedure System is not picking condition base value for condition type JSRT. I have checked the tax procedure and found alternative Cal Type is 17 and is working fine for Domestic vendors.
Friends i need your help in sorting out this issue. Pls suggest what I can check in order to sort out this issue.
Rgds, Krishan RahejaHello!
In TAXINN the base value for the condition JSRT is picked up from step 100.
I suggest that you change the "From" value to 100 instead of whatever you may be using
Then test the transaction once again.This will not affect your normal service tax calculation either. So please make this change & try using S1 for planned delivery cost.
Hope this helps !
Cheers!
Plauto
Edited by: Plauto Abreu on Feb 11, 2011 9:03 PM -
Queue Determination by Picking Area
Dear all,
I am having difficulty with the correct Queue determination.
Current config has four wild cards (***) and no Door, determining Queue-A
I have added one line in my config table where the wild card voor Picking Area is replaced with a Real Picking Area number, and I have assigned one location to it. Also this line has Queue-B as queue to be determined
In my TO the destination bin is the one with the picking area mentioned above.
Still, the new Queue is not found.
I do not get it. Do you? If you do, please let me know.
Best regards,
NickThere is a very useful SAP OSS Note out there that sets out the correct settings required for Placements/ Removals and Other stock transfers. Have a look at:
Note 320804 - Created transfer orders are assigned to no queue
thanks,
Adam. -
DIP profile:"No values found" in the sales inquiry
Dear all.
I create an sales inquiry with one item.In the Sales B tab of item detail,I want to input DIP profile.But when I press f4 in the field of DIP profile,the sap show me a message "No values found".So I enter tcode ODP1 to maintain the DIP profile.There are 2 default DIP profile in the sap.I select the "BILLPLAN" and click Usage subtree and add one new line with Sales Doc. Type "IN".Then I go back to sales inquiry.
But the sap still show me a message "No values found" when I press f4 in the field of DIP profile.
So I need the experts give me some useful advice and reference to resolve the problem.
Thank you.
Regards
YodaHi,
Please go through this link.
[RRB|https://www.sdn.sap.com/irj/sdn/wiki]
If can not reach, follow this path
WIKI-ERP operation-Sales and distribution- click on Resource related billing in "Children"
Thanks,
Vrajesh
Edited by: Vrajesh Nayak on Oct 14, 2008 10:58 PM -
No Values Found when F4 pressed in cell
We have an input ready row on an empty plan cube. When F4 is pressed to facilitate data entry into the cell, the values in the master data table are not displayed (which is what I expected). I have experimented with the InfoObject settings on the Business Explorer tab.
In the query, the settings for the characteristics are:
Access Type for Result Values: Posted Values (but I get the same results even if it's set to Master Data)
Query Execution for Filter Value Selection: Values in Master Data Table
Any/all suggestions are appreciated.
Thank you,
PamHi Pam,
I think you are using BEx Analyzer. The settings of the query will not be taken as the default in BEx Analyzer. In the BEx Analyzer F4 help one can change the settings for the F4 help 'read mode': Press the settings button in the upper right corner of the pop up, go to the second tab. Here one can switch to 'master data'.
I think in new lines this is the default. The effect with 'no values found' I observed only in the filter item.
Regards,
Gregor -
No values found in FS02 t code
Hi experts,
In fs02 t code i have give the company code and in the gl account i try to select the account number but it showing that no values found.
pls advice.
Regards
arunhi Arun,
there could be two reasons behind:
1. there is no chart of account linked to the company code (you can check this in T001)
2. there are no G/L accounts created in the chart of account (you can check this in SKA1)
hope this helps
ec -
What are the values and meaning of PaymentStatusID and statusTypeId from the API
What are the values of PaymentStatusID and statusTypeId from the API?
The WSDL just list the fact tht these exists but not the values and meaning.Found more info on the BC site, figured I'd include it all.
PaymentMethodType
CreditCard = 1
Cheque = 2
Cash = 3
EFT = 4
PayPal = 5
HostedCreditCard = 7 - like google checkout etc.
DirectDebit = 8
GiftVoucher = 9
Free = 10
PaymentStatusID
Unknown = -1
Succeeded = 0
Failed = 1
Pending = 2
Denied = 3
AddressTypeId - AddressType
Home Address = 1
Work Addres = 2
PO Box = 3
Not Used = 4
Shipping Address = 5
Pickup Address = 6
Storage Address = 7
Billing Address = 8
OrderType
Quote = 1
Invoiced = 2 -
Bad check value found during dbv on Datafiles
Hi,
We just received new DB, that return a "Bad check value found during dbv" on DBVerify.
So, we can Open & Use this DB... perhaps until crash if we use the "bad block", but we can't save it by Rman (ORA-19566: exceeded limit of 0 corrupt blocks for file xxx) !
And best thing is... Previous DB owner don't have any save (Rman or other) of this DB !!!
Are there solution(s) about this problem... or this DB is definitively dead ?
Sorry for my english,
Thank for your help,
J Sourti.Hi;
What is DB version?
Please see below note(also referance part) and below link which at least show u some way
Rman Reports An Ora-19566: Exceeded Limit Of 0 Corrupt Blocks From Backup [ID 457422.1]
http://oraclespin.wordpress.com/2009/07/03/how-to-find-and-fix-block-corruption-using-rman/
Regard
Helios -
Oracle Payroll Costing not picking the segment value.
Dear ALL,
I am facing an issue in my Organization that when we run costing of the payroll the cost allocation segment didn't get the correct Project Segment value.
Our cost allocation key flex segments and qualifiers are given below:
**AKS_HR_COMPANY Qualifiers Balancing,Payroll**
**AKS_HR_PROJECT Qualifiers Assignment,Balancing,Organization,Payroll**
**AKS_HR_DEPARTMENT Qualifiers Balancing,Organization,Payroll**
**AKS_HR_ACCOUNT Qualifiers Balancing,Element,Element Entry,Organization**
**AKS_HR_SUB_ACCOUNT Qualifiers Balancing,Element,Element Entry,Organization**
**AKS_HR_EMPLOYEE Qualifiers Assignment,Balancing,Payroll**
**AKS_COST_FUTURE_1 Qualifiers Balancing,Payroll**
The costing didn't pick the AKS_HR_PROJECT segment value and some times it pick '00000' which is actually not the project code. Some times the other segment like AKS_HR_DEPARTMENT and AKS_HR_SUB_ACCOUNT pick the null value in costing.
Kindly Help because its the issue of Live environment.
Regards.Dear Vignesh,
From where I check that the SLA is enabled? because I am new and not the part of implementation.
When I check the assignment process of the employee its shows the costing data but the value of project segment not sowing properly.
The qualifiers set for the project segment is as follows:
Assignment,
Balancing,
Organization,
Payroll
I saw some employees has given 00000 in the project segment on employee level. when i delete the record from employee level, the costing has to pick project segment from organization level but when I run the costing and saw the costing from assignment process screen it again shows '00000' in the project segment.
Please guide me if I am doing any thing wrong. -
MCSI Report is showing msg "No value found"
Hi all,
when I am running MCSI Report, This Report is showing "No Values found".
What is the problem? and How can we populate data for this report?
Kindly guide with detailed steps.
Parallely report MCKH is populating with prpoer value.
Your early help is appreciated.
Thanks in advance
RajuHi
First check whether you have maintained any update grp for the self defined info structure which you have defined. If not maintain it MC24-Tcode
Than check whether you have activated the self defined info structure through tcode OMO1. If not activate it.
Check the sales area and statistics indicator assignment with Statistics Update group item in OVRP-T-code (Assign Update Group at Item Level).
Check the sales area and statistics indicator assignment with statistics group header in OVRO - T-code
(Assign Update Group at Header Level)
For more info you can check
Re: T-code - 'MCTG' 'New Division'
Regards
Mani
Maybe you are looking for
-
Show additional tab in Cprojects
Hi, I have created a custom Webdypro ABAP component to add a new tab in cProject Component(DPR_MAINFRAME). In my webdynpro component i have implemented the standard interface DPR_CUST_EXT_INTF. In view i have created a tab and inside the
-
Why SSD Macbook AIr 13" 2015 speed low
Score Test of Macbook air 13" (2015) 128GB
-
Dont want HD - too slow to download. Is there a setting?
-
I have a new iMac 27" which of course came with Yosemite and has been updated through Software Update. I have a disk drive attached, which used to be attached with no problems to my previous iMac, running 10.9. Whenever I run a program that wants to
-
Installation of Office:mac 2008
pls help, struggling to get used to my new imac. bought microsoft office:mac 2008 and went through the installation process. All i get now when i try to open any office application is an error message: "the application microsoft blah blah quit unexpe