Picking IDOCs thrugh Batch Job

Hi
Issue : Say around 10 Idocs got created which are to be sent to third party system. Those are being sent via Batch Job.
            Here, the Batch job is picking only some idocs say 4 and leaving other 6. And after sometime, i.e in the next run of the
            Batch Job it is picking some more. Like this the idocs are being picked by the batch job randomly, not all at a time though
            they are ready.
            Partner Profile Setting is COLLECT IDOCS.
Appreciate your occasional reply/resolution.
Thanks
Shankar
Edited by: Thomas Zloch on Apr 19, 2011 2:21 PM - priority adjusted

Job is running IDOCs available when it starts....others are arriving later....picked up by next execution, and so on and on.

Similar Messages

I/b Idoc through batch job

Hi
If customer sent successfully idoc to our sap system to create orders .But if the Idoc is not created for the I/b idoc for placing orders in our system
Then how we can schedule or deal the customer requirement.
Regards
MK

More details, check the SAP link about EDI and ALE:
https://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5bea85b11d6b28500508b5d5211/content.htm

To know which positions are included in a batch job

HI Experts,
We have a batch job (PFUD) which does a daily comparison for role assignment and other activities to be updated to the user's profile.
it runs daily at 10 o clock night.
consider a scenario where we have assigned a security role to a position at 9.59 pm.
We are not sure whether this position is picked up in the daily job(PFUD).
before the job completes, is there any possible way to find whether the job has picked this position for user comparison.
Can you please help me on this request?
Please let me know if you require any additional information.
Thanks in advance.
Regards
Julius.

Hi Experts,
Thanks for your suggestions,
is it possible to find whether a reconcillation has happened for user before the batch job completes its work.
(i.e) I have assigned the role to a position,I wanted to find whether this position(HR Organisational Management REconcillation) is picked in the batch job or not.
before the batch job completes the whole process.
(we can see the log only after the batch job completes... is there any way we can tell whether its picked up in the batch job or not... when the batch job is still running)
Is it possible?
Please let me know if you require any additional informatin from me to find an answer to this questions.
Thanks in advance
Regards
Julius.

How to trigger IDOC in a batch job?

hi,
My requirement is that a batch job must run on R/3 side to check if bank data are created or changed.Any creation or update in table BNKA will trigger an IDOC
If a record is created IDOC BANK_CREATE01 should be triggered and
If a record is changed/deleted IDOC BANK_CHANGE01 should be triggered
A background program should run periodically (every hour) and check the table CDHDR for object class BANK.
The program must check if any new entry exist in the table since the last run.
New records can be identified according to the fields UDATE and UTIME.
According to the change indicator (CHANGE_IND) the program will determine if the IDOC_CREATE (changeID=I) should be run or IDOC_CHANGE (changeID=U or D).
If change ID=D, then deletion indicator will be set in the CHANGE IDOC.
Can anybody tell me how will i write the code for this and how to trigger IDOc as i very basic knowledge in ABAP
Thanks & Regards,
Loveena

hi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri

Batch job for IDOC processing in 64 status

Hi experts ,
i want to know the name of Batch job for IDOC processing in 64 status.
I have configured the partner profiles as 'process immediatly'.
So with this configuration whenever an idoc comes in production it gets processed immediatly and automatically.
i want to know how they are getting processed automatically.
is there any job which looks for these idocs(in 64 status and process immediatly flag) and process it.
What is the trigger for thiese idocs processing???
Please guide me
thanks in advance
Anit gautam

Hi Thanks for ur reply.
=====Upon arrival, "process immediately" should fire that process =====
how it is getting fire?
means is there any batch job running which looks for idoc in 64 status or is there any event which get triggered when an idoc
comes in 64 status.
why we use OYEB transaction???
Regards

How to find out which batch job generated a specific idoc?

Dear Colleagues
Is it possible to find out which batch job generated a given idoc?

You need to check in the program about the naming conventions for the job. Then based on it you will be able to identify the correct one.
Thanks
Nabheet

IDocs Batch JOb Session!

Hi!
Can any one tell me whats the transaction for <b>IDocs Batch job</b> Session.
Thanks & Regards.

Hi,
You can create a batch job via SM36 and schedule to run the following standard programs.
- RBDAPP01 (For inbound processing)
- RSEOUT00 (For outbound processing)
Please ensure your partner profile were setup to trigger by background job (for inbound) and collect IDoc (for outbound).
Regards,
Ferry Lianto

Flat File Processing using Batch Job

Hello,
I need some ABAP advice...
The scenario: There's a batch job that runs every hour and picks up all the files from APP server and processes them to creates idocs. Sometimes, while a batch job is running, a file is being created on the app server. But although the file is being written to and is not yet complete, the batch job picks up this file to create an idoc and hence leads to errors. Is there a way I can check if a file is already complete and then only the batch job should process the file.
I am using SAP 4.6c and it doesnt allow me to use GET DATASET attributes...
Any suggestions on how to check.....

Hi Shipra,
Check this code taken from another post to get the creation time of the file:
*& Report ZFILE_CREATE_DATE
REPORT zfile_create_date.
TABLES epsf.
PARAMETERS dir
LIKE epsf-epsdirnam DEFAULT 'directory here'.
PARAMETERS file LIKE epsf-epsfilnam DEFAULT 'file here'.
DATA : mtime TYPE p DECIMALS 0,
            time(10),
           date LIKE sy-datum.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
     EXPORTING
          file_name              = file
          dir_name               = dir
     IMPORTING
          file_size              = epsf-epsfilsiz
          file_owner             = epsf-epsfilown
          file_mode              = epsf-epsfilmod
          file_type              = epsf-epsfiltyp
          file_mtime             = mtime
     EXCEPTIONS
          read_directory_failed = 1
          read_attributes_failed = 2
          OTHERS                 = 3.
IF sy-subrc NE 0.
WRITE: / 'error:', sy-subrc.
ELSE.
*The subroutine p6_to_date_time_tz is sap std present in rstr0400.
PERFORM p6_to_date_time_tz(rstr0400) USING mtime
                                             time
                                             date.
WRITE: / 'mtime:',mtime.
WRITE: / 'date: ', date.
WRITE: / 'time:',time.
ENDIF.
Regards,
Gilberto Li

Invoice not generated through Batch Job

Hello
I am facing a Problem in Batch Job. When the delivery is created through VL01n transaction manually, the Invoice for this delivery is created automatically. However for one of the delivery the Invoice was not created automatically through Batch Job.
Can some one help me how to go further on this problem? I have checked the Batch Job and found that it is schedule daily, However the Delviery was created after this schedule time. So ideally this delivery should have been considered for automatic generation of Invoice in the next schedule run of the Batch Job. However this has not happened.
Any views on this
Regards
Screams

Hello,
Please check the billing date and the billing date which is in the variant. in the variant there could be that the billing date might have been specified from and to, in any case billing date for the document is not past the variant billing date it will pick up.

Creating a batch job for the sapscript

Hi folks,
I have a question of how schedule a batch job in the background for the sapscript? I have the print program and I am using the following FM to read the output device which I pick up printer device from the pop up dialog box. How can i do that?
Here is the FM that I using in the print program.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
ARCHIVE_ID                   = C_CHAR_UNKNOWN
ARCHIVE_INFO                 = C_CHAR_UNKNOWN
ARCHIVE_MODE                 = C_CHAR_UNKNOWN
ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
AR_OBJECT                    = C_CHAR_UNKNOWN
ARCHIVE_REPORT               = C_CHAR_UNKNOWN
AUTHORITY                    = C_CHAR_UNKNOWN
     COPIES                       = 1
     COVER_PAGE                   = SPACE
     DATA_SET                     = 'LIST8S'
DEPARTMENT                   = C_CHAR_UNKNOWN
DESTINATION                  = C_CHAR_UNKNOWN
EXPIRATION                   = C_NUM1_UNKNOWN
IMMEDIATELY                  = C_CHAR_UNKNOWN
IN_ARCHIVE_PARAMETERS        = ' '
IN_PARAMETERS                = ' '
LAYOUT                       = C_CHAR_UNKNOWN
LINE_COUNT                   = C_INT_UNKNOWN
LINE_SIZE                    = C_INT_UNKNOWN
LIST_NAME                    = C_CHAR_UNKNOWN
LIST_TEXT                    = C_CHAR_UNKNOWN
MODE                         = 'CURRENT'
     NEW_LIST_ID                  = 'X'
NO_DIALOG                    = C_FALSE
RECEIVER                     = C_CHAR_UNKNOWN
RELEASE                      = C_CHAR_UNKNOWN
REPORT                       = 'ZSAPFORM'
SAP_COVER_PAGE               = C_CHAR_UNKNOWN
HOST_COVER_PAGE              = C_CHAR_UNKNOWN
PRIORITY                     = C_NUM1_UNKNOWN
SAP_OBJECT                   = C_CHAR_UNKNOWN
TYPE                         = C_CHAR_UNKNOWN
USER                         = SY-UNAME
   IMPORTING
OUT_ARCHIVE_PARAMETERS       =
      OUT_PARAMETERS               = i_pri_params
     VALID                        = w_valid
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND       = 1
INVALID_PRINT_PARAMS         = 2
INVALID_ARCHIVE_PARAMS       = 3
OTHERS                       = 4
IF SY-SUBRC = 0 and w_valid ne space.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   write: / 'Pri params ', i_pri_params.
Thanks,
SK

Hi folks,
I have a question of how schedule a batch job in the background for the sapscript? I have the print program and I am using the following FM to read the output device which I pick up printer device from the pop up dialog box. How can i do that?
Here is the FM that I using in the print program.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
   EXPORTING
ARCHIVE_ID                   = C_CHAR_UNKNOWN
ARCHIVE_INFO                 = C_CHAR_UNKNOWN
ARCHIVE_MODE                 = C_CHAR_UNKNOWN
ARCHIVE_TEXT                 = C_CHAR_UNKNOWN
AR_OBJECT                    = C_CHAR_UNKNOWN
ARCHIVE_REPORT               = C_CHAR_UNKNOWN
AUTHORITY                    = C_CHAR_UNKNOWN
     COPIES                       = 1
     COVER_PAGE                   = SPACE
     DATA_SET                     = 'LIST8S'
DEPARTMENT                   = C_CHAR_UNKNOWN
DESTINATION                  = C_CHAR_UNKNOWN
EXPIRATION                   = C_NUM1_UNKNOWN
IMMEDIATELY                  = C_CHAR_UNKNOWN
IN_ARCHIVE_PARAMETERS        = ' '
IN_PARAMETERS                = ' '
LAYOUT                       = C_CHAR_UNKNOWN
LINE_COUNT                   = C_INT_UNKNOWN
LINE_SIZE                    = C_INT_UNKNOWN
LIST_NAME                    = C_CHAR_UNKNOWN
LIST_TEXT                    = C_CHAR_UNKNOWN
MODE                         = 'CURRENT'
     NEW_LIST_ID                  = 'X'
NO_DIALOG                    = C_FALSE
RECEIVER                     = C_CHAR_UNKNOWN
RELEASE                      = C_CHAR_UNKNOWN
REPORT                       = 'ZSAPFORM'
SAP_COVER_PAGE               = C_CHAR_UNKNOWN
HOST_COVER_PAGE              = C_CHAR_UNKNOWN
PRIORITY                     = C_NUM1_UNKNOWN
SAP_OBJECT                   = C_CHAR_UNKNOWN
TYPE                         = C_CHAR_UNKNOWN
USER                         = SY-UNAME
   IMPORTING
OUT_ARCHIVE_PARAMETERS       =
      OUT_PARAMETERS               = i_pri_params
     VALID                        = w_valid
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND       = 1
INVALID_PRINT_PARAMS         = 2
INVALID_ARCHIVE_PARAMS       = 3
OTHERS                       = 4
IF SY-SUBRC = 0 and w_valid ne space.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   write: / 'Pri params ', i_pri_params.
Thanks,
SK

Batch job failing with INVALID_STARTDATE exception

Hello Experts,
our batch job runs 17th minute of every hour on daily basis.It is running successfully from 00:17 AM to 20:17 PM and gets completed within 1 hour for every run.
But when it is starting 21:17PM, it keeps on running for next 5-6 hours and then gets cancelled with error "Invalid_startdate"
Currently it is posting all the idocs.Idoc status is 53. But the problem is closing the job Function module JOB_CLOSE is throwing an exception "INVALID_STARTDATE" and gets cancelled.
Could anyone please provide us any help on this.

Usually this message is raised because of:
Unsupported combinations of specifications, such as periodic repetition of jobs that were scheduled to wait for a predecessor job
Incomplete or incorrect specifications, such as an incomplete start date.
but..is your SAP in a time zone 3 hours different from yours?
e.g. New York has already a new day when you have 9PM in LA

How to find out the Batch job selection screen values

Dear Users,
One of our users has set up a Batch job by manually entering values into the Selection screen of a report instead of picking up a Variant. We would like to know the values entered on selection screen since the job has failed and the user doesn't remember the selection screen values entered.
Can anyone please advise if there is a way we can figure out the selection screen values entered?
Thanks,
Vijay

Hi,
You can debug your failed job by going to 'SM37', type in 'JDBG' in the command line ( no '/' ), put the cursor on the job and press enter - will take you to the job in debug mode.
You can do this only after the job has finished execution. This will simulate the exact background scenario with the same selection screen values as used in the job.
So type in the transaction code 'JDBG' and place your cursor on the job after It has finished. It will take you to a SAP program in debug mode. Step through this program which is about 10 lines, after this your program will be executed in the debug mode.
Check the selection screen values.

How to restrict the number of batch jobs used by middleware?

Hi,
I'm using middleware to replicate data which send IDOCs from one system to another. I know on source system, I can use SMQS to restrict the number of connections. But on target system, can I use any tool to restrict number of batch jobs? Because every time when replicating data, all batch jobs are occupied.
Thanks a lot!

Priya:
It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
Varad

Batch Job for ME59N getting error SE133 - Net value could not be determined

HI,
We can convert the PO automatically when run manually tcode ME59N successfully.
But when We schedule a batch job to run ME59N (RM06BB30) to create AUTO Purchase order for services item Purchase requistion.
Getting error message SE133 "Net value could not be determined". PO canot be converted automatically.

Hi,
Price/ Net value not picking!
Check info record based on Material Group for your service PR which need to be converted to PO.
Also check activation of Automatic Purchase order creation for Service requisitions in t.code: ML91.
Check vendor master , schema group of vendor and check MM pricing procedure, the availability of condition type for service master for service PO.
For more please read note 635511
Regards,
Biju K

Delete retail material via batch job?

Hey guys,
is there a way to delete a retail material via batch job? I know with transaction MM16 you can schedule a job to do that. But how can i do that without using transaction MM16. Is it possible to this via IDoc?
thx,
Wei-Ming

Check OSS 35615 & 93732.
Cheers

Picking IDOCs thrugh Batch Job

Similar Messages

Maybe you are looking for