Picking multiple quants from one storage bin

Hello all,
I have a client that purchases copper wire in pallets that are stored initially in storage bins.  During goods issues to production the pallets are split up and, when material is put back in the warehouse,  storage bins end up with multiple quants that are partial pallets.  When they issue goods, the system, using FIFO, picks quants from multiple bins even though one bin has sufficient quantity.  That forces the warehouse staff to pick from multiple bins rather than one. 
Is there a way to make the system pick all of the material from a single bin even if there are multiple quants?
Thanks,
Ross

Strategy A: Partial Quantities First  
With this picking strategy the FIFO principle is overridden in order to optimize the management of stock in the warehouse
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f844b74afa11d182b90000e829fbfe/frameset.htm

Similar Messages

  • More than one Quant in a Storage bin section (Strategy P)

    Dear all,
    We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
    For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
    During testing I found out a Storage bin section can only contain one Quant at a time.
    Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
    If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
    Bin item X in storage bin Y already occupied
    Message no. L3063
    Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
    Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
    We want to be able to put more Quants into a Storage bin section at a time.
    How can we achieve this?
    Note we rather donu2019t want to use Storage Unit Management.
    Thanks for any clues!
    Kind regards,
    Bart

    Hi Bart,
      As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
    Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
      At any point of time you can easily track how many quants (Mat + quantity)  are stored in that Bin & relevant section.
      For strategy P , SUT check must be activated you cannot skip it.
    If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
      To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
      You just need to map appropriate Capacity check as startegy I goes with active capacity.
    Thanks,
    Mahesh

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • Effect of issuing Material directly from Interim Storage BIN?

    Dear Experts,
    What is effect of issuing(311) material directly from Interim storage BIN without storing to Storage BIN.
    Because i am unable to do LB11& LB12  for  both GR's(101) and TP(311) as it has directly picked from Interim Storage BIn to do
    TP(311).
    So please someone explain me the effect of the above Scenario?
    Thanks & Regards,
    Olet Malla

    You can do it but in general you should not allow picking from interim Storage Types.  For example you don't want Sales trying to pick materials sat in the PSAs, you don't want Production trying to pick from materials in 916 etc. etc.

  • How to transfer stock from one storage type another storage type

    Hi Guys
    I have 10 items
    How can I transfer all in One Single Transfer order  from one storage type to another storage type
    I need to take TO print for all these 10 TO items

    Hi,
    Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
    Regards,
    Dilli Babu R

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • To Move Multiple Files from one directory to another.

    Hi,
    I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
    Thanks in advance.

    Hello Sachin
    Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
    Import parameters               Value             
    RFC_DESTINATION =                 NONE              
    LOCAL_FILE             =         filename          
    LOCAL_DIRECTORY   =              /dir1/dir2        
    REMOTE_FILE             =        filename          
    REMOTE_DIRECTORY   =             /dir1             
    OVERWRITE_MODE        =          F        " force -> overwrite existing file                 
    TEXT_MODE                    =   B               " binary
    TRANSMISSION_MONITOR            X       " display transmission monitor            
    *RECORDS_PER_TRANSFER            10                
    *REQUESTED_FILE_SIZE             0                 
    *MONITOR_TITLE                                     
    *MONITOR_TEXT1                                     
    *MONITOR_TEXT2                                     
    *PROGRESS_TEXT                                     
    *OBJECT_NAME  
    Regards,
      Uwe

  • Moving multiple queries from one category to another in QM

    Hi All,
    Is there is any way of moving multiple queries from one category to another in the query manager?
    Or is the only way of doing it by saving each one individually into a different category.
    Any ideas ?
    Regards,
    Rakesh N

    Hi Rakesh,
    The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
    Thanks,
    Gordon

  • How can I order an iphone 6 and pick it up from one of the apple stores in London. It doesn't work with reserve and pick up because the 64 gb is never in stock.

    How can I order an iphone 6 and pick it up from one of the apple stores in London??? It doesn't work with reserve and pick up because the 64 gb is never in stock.

    Thank you for replying.    Yes I deleted the old email address..   

  • Add to Multiple Tables from One Page

    Hello,
    I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
    ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table IDD_ID_DATA.
    So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
    So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
    I am new to APEX so any help would be greatly appreciated!

    UPDATE:
    I received an email from the APEX Support Team:
    "The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
    In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
    I have been playing around with PL/SQL code and the end result is this:
    begin
         INSERT INTO table1
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
         INSERT INTO table2
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
    end;
    I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

  • Scenario of multiple Asset from one AUC/WBS

    Hello,
    I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
    I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
    Is there any other way to handle this scenario?
    Thanks
    Sarang

    Hello Virendra,
    I am not using Investment Managemnt. What do you mean by IM profile?
    I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
    So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
    Thanks
    Sarang

  • Creating multiple links from one map image in Flash CS4

    I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

    If I was to answer the problem, I would be giving you what you asked not to be given... the solution.  So I'll suggest that you start by researching the getURL() function.  That is what AS2 uses for opening web pages.
    As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
    http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
    Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering.  In general, if you type in the right keywords, you get fairly good search results.  In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

  • Passing Multiple rows from one external webpart list to another

    Hi Folks,
                    I have almost spent 1 week looking into this without any success. I have an external list "List A"  (in a webpart) with one of the columns as "State".
    Another external list "List B"  (in a webpart ) has state and user as columns. In some case I want to pass 1 state and in another I want to pass multiple state.  Passing one state from List A to List B works fine. But Multiple state does
    not work because the webpart list has the property "Send First row to connected web parts when page loads".  If I disable this option then the web part does not pass anything. Is there a way to pass multiple rows from one Webpart
    external list to other?

    http://www.sharepointanalysthq.com/2010/07/bcs-external-list-limitations/
    No Lookups
    Unfortunatly the only thing that you can do a look up on in an external list is on the ID column, anything else and you are out of luck.
    http://social.technet.microsoft.com/Forums/en-US/615771a0-ba78-4e38-9e2d-ded0204173ba/external-list-referenced-as-sharepoint-lookup?forum=sharepointgeneralprevious
    Try below webpart. it should help
    http://www.sparqube.com/SharePoint-Lookup-Column/
    If this helped you resolve your issue, please mark it Answered

  • How to transfer blocked stock from one storage loc to other storage loc

    Hi,
    Kindly let me know the procedure to transfer the blocked stock from one storage location to other storage location within a plant.
    Regards
    Rajesh

    I guess you have to convert it to unrestricted type before you can transfer, then reconvert it back to blocked.
    Not too sure.
    Regards,
    Srihari

  • Run multiple apps from one browser windows with 9ias r2

    We are running 9ias r1 with forms 6i as our production server. Users are able to access one html page with multiple links to their applications. They can run one application, keep it running, navigate back to the html page and run a second application.
    We are testing 9ias r2 with forms 9i, but when users try to navigate back to the html page to run the second application the first application closes.
    Is there a way to have 9ias r2 work the same as r1 and allow users to run multiple application from one html page?

    Hi,
    Thank you for posting in Windows Server Forum.
    You can take rdp of server 2012 R2 from Fedora Linux desktop by running Yum command or Gnome rdp support. Please check below article for information.
    1.  How to Use Remote Desktop (rdesktop) in Redhat/Fedora/CentOS
    2.  Remote desktop from Linux to windows using rdesktop and gnome-rdp
    3.  XRDP Installation: An Easy Remote Desktop Setup for Linux
    Note:
    Microsoft is providing this information as a convenience to you.
    The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

Maybe you are looking for