Picking status in Out. delivery changed to status A after GR post with MB0A

Hi,
I am facing an issue in our production system, these is the scenario:
- Replenishment delivery
- ZPicking confirmation idoc sucessfully picked the outbound delivery and post the GI.  The material was cut and it was batch splitted.
- Then it was performed a GR (mov 101)  against a stock transfer order via MB0A.
- After this GR posted, the status of picking of the parent material of the batch split was changed from status " " (Not relevant) to status "A" (Not yet processed).
- Also the status at header level was changed.
Current status of the delivery
Header Status
Picking Confirmation --> B
Total Gds mvt status --> B
Item Status
Item 10:
    Pick confirmation --> A
    Goods movt --> B
We have tried to reverse the GI to generate it again and reset the statuses but it is not possible to do it via VL09 neither MBST, etc.
Any idea on how to correct this problem?
Thanks,

Hi,
What is the moment type being taken for PGI through idoc?check the moment type definition for its allowable transactions and foe reverse.
Regards,

Similar Messages

  • How can we Change employee joining date after salary posted

    Dear concerned,
    I am facing situation where we need to change the joining date of an employee from 26.11.07 to 22.11.07.
    also dec salary accounting entry has been posted.
    to change date i need to delete all processed salaries but as accounting entry has been posted i can't delete it.
    please tell me way out.
    Regards,
    Gaurav.

    Hi Swapana,
    I tried your options but gives message " Personal number is already accounted for"
    If I reverse salary it says voucher already posted
    I do not think we can reverse accounting entry posted by SAP.
    please suggest.
    regards,
    Gaurav

  • HELP! Lost my entire library of over 700 songs with my last iTunes update. I had a lot of trouble even getting to update, and when it did it took out my entire library. Even after signing in with my apple ID it will not pull up my music. VERY frustrated.

    It started with my iTunes not wanting to update at all. I kept getting an error that read "cannot access %appdata%". Ok so I let that go, still had my music, podcasts, books, etc...I just didn't have an updated iTunes. It still worked so I was cool with that. Then my phone broke this week, and I had to get a new one. When I came home to register, it didn't give me my songs like it did the last time I backed a device up to my account. So I had to do it manually. Not even half way through, it just stops and won't let me add anymore of my songs, and the few songs that I tried to drag over are gray in color on my phone and you can't listen to them when you tap them. Never mind all my other songs that I lost as well. I mean, come on! I had almost 300$ worth of music that I feel has been stolen. My kids received iTunes gift cards every Christmas and birthday for the past 3 years, and now it's gone. ALL OF IT. VERY VERY UPSET! Ok, I'm getting ahead of myself, so back to the issue. I'm beginning to get flipped out when it stops working altogether. iTunes, computer, everything. It finally says, iTunes has an update available that will solve the issue (yeah right). Me being dumb, I guess, I begin the steps to again try and download this update. Still getting the error mentioned above, so I start finding out what to do to get rid of that error so I can GET MY SONGS ON MY NEW PHONE. Go to apple support, and it says to delete iTunes and all its similar components, and it won't even let me do that!!! I go into administrator side, and it says I need permission. I had already gotten into our administrator side to which only my husband and I know the password so I already have permission. I give up on that for a while, and see if windows has any updates. There were a couple so I download those. Try to go back into iTunes once that's all done, and it shoots up this license aggreement. I'm excited at this point thinking my ordeal is over. So I click agree and iTunes comes up. That's when I discovered all my music, apps, podcasts GONE. I click on iTunes match, and it says something about matching music for $24.99 a month?! I WANT MY MUSIC BACK THAT HAS ALREADY BEEN PAID FOR. If this does not get resloved, I WANT MY MONEY BACK that was spent on this music. If this isn't resolved I also will never, NEVER reccomend iTunes, or any of its other music/app/book/podcast related business to anyone ever again. I have been an iTunes user for almost 4 years now, and I have never been this disappointed. When my phone broke we almost got a regular phone to save money, but because of all my music/books/podcasts already in my iTunes account we got another iPhone. PLEASE TELL ME WHAT TO DO TO RECOVER MY LOST LIBRARY!

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • Is it possible to change the asset value after depreciation posted for 4 months

    Hi
    Is it possible to change the asset value from 50000 to 60000 after posting the depreciation for 4 months.
    If it is possible kindly share the process..
    Thanks
    Srikanth KVS

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • Trouble change ringtone and alert after update

    i can't change ringtone n alert after update firmware with my e5, tell me please if you have solution

    Can you provide more details..like how exactly you are trying.. ? Any error message ?

  • Picking status change in Outbound delivery

    Hi All,
    I have to create a start condition in PPF actions, whihc is nothing but BADI... whihc will trigger when the Pcikinf status is changed....
    I have these threee condtions:
    Action will be triggered by outbound delivery order status change:
    1.     Picking planned status at header level changed after warehouse order creation/cancellation  (corresponds to Focus2 status      0 u2013 Forecast);:
    u2022     from u201CNot startedu201D to u201CCompletedu201D and back from u201CNot startedu201D to u201CPartially completedu201D and back ;
    u2022     from u201CPartially completedu201D to u201CCompletedu201D and back;
    2.     Picking status changed at header level after execution each of warehouse order in drop location (corresponds to Focus2 status      1 - BeginPicked);
    u2022     from u201CNot startedu201D to u201CPartially completedu201D and back;
    3.     Picking status changed at header level after execution of last warehouse order in drop location (corresponds to Focus2 status      2 - Picked):
    u2022     from u201CNot startedu201D to u201CCompletedu201D and back;
    u2022     from u201CPartially completedu201D to u201CCompletedu201D and back;
    any help????
    I want to know how can i code this??

    Hi,
    In the BADI, you can get reference to Delivey Object
    lo_dlv_ppf TYPE REF TO /scdl/cl_dlv_ppf.
    lo_prd                TYPE REF TO /scwm/cl_dlv_management_prd.
    get delivery reference
      lo_dlv_ppf ?= io_context->appl.
    Get the attributes DOCID, the find the status of the documents accordingly.
    Now get the instance of the Delivery management:
    lo_prd = /scwm/cl_dlv_management_prd=>get_instance( ).
    Then read Delivery header and items using the below method based on DOCID:
    APPEND is_docid TO lt_docid.
      ls_include_data-HEAD_PARTYLOC  = abap_true.
      ls_include_data-HEAD_DATE      = abap_true.
      ls_include_data-HEAD_TRANSPORT = abap_true.
      ls_include_data-ITEM_DATE      = abap_true.
      ls_read_options-data_retrival_only = abap_true.
      ls_read_options-mix_in_object_instances = abap_true.
    CALL METHOD lo_prd->query
            EXPORTING
              it_docid        = lt_docid
              iv_doccat       = is_docid-doccat
              is_read_options = ls_read_options
              is_include_data = ls_include_data
            IMPORTING
              et_headers      = lt_whr_headers
              et_items        = lt_whr_items.
    You can find header status in lt_wr_headers.
    Or based on DOCID, get status from table /SCDL/DB_STATUS.
    Hope that helps
    Vinod.

  • Output error - partially picked status in delivery

    Hi All,
    im getting an error while taking output for the delivery.Scenario is like, i have created STO with about 600 line items(10 interval). created outbound delivery for the same. Two deliveries have been created one with 500 line items and other with 100 line items respectively. in the first delivery i have picked all the quantity(manually w/0 WM) and did the PGI. system shows the status as partially picked and when i tried to take the out put, it is giving error " No data exists for the delivery" and in the long text " Place holder for the batch input error text, this message is not output"
    for the second delivery again i picked and did PGI, status shows fully picked and out put is getting generated.
    im using std LD00 output type
    In the output procedure i assigned the requirement '1' which is delvry GI posted which says system checks the goods movt status and if the status is fully picked and PGI is done output will be generated.
    so i have created a new routine where in i gave goods movt status to accept partially picked or fully picked and PGI is done to give out put. even then it is not working.
    i want the output for the partially picked deliveries too.
    pls help in this issue as this is happening in production client.
    Thanks and Regards
    Maddy

    Hi Maddy
    Welcome to SDN forum
    As you are using LD00 output type only , and for this output type as you have assigned requirement 1 , because of this only output is not coming . So firstly check wheather output is coming correctly or not  by removing the requirement 1 .
    Secondly ,  also check wheather any Smartforms are assigned to LD00 output type or not. If any Smartform is assigned then go to smartform and then check wheather any sub-routine has been written or not
    Finally also check the access sequcne and the condition record you have maintained
    Regards
    Srinath

  • Picking status/putaway status & Status of warehouse management activities

    Hi experts.
    I have a question but first let me explain the process.
    1) I have a Delivery document and its corresponding transfer order (TO) and the TO is not confirmed and the following status at level item into the delivery are
    Picking status/puaway status = C
    Status of warehouse management activities = B
    at this moment if I try to change the delivery quantity of the current item the system does not allow to change the quantity and this is OK.
    2) When the transfer order (TO) is confirmed and the status are changed.
    Picking status/puaway status = C
    Status of warehouse management activities = C
    at this moment if try to change the delivery quantity the system is allowing to change the quantity and for us it is not ok because the transfer order already was confirmed, how can we avoid this situation if the statuses are 'C' 'C' corresponding.
    thanks for your help and I appreciate any answer.
    Best Regards.
    Victor Calderón.

    Hi,
    Please visit this section in the SPRO (IMG)
    Logisctics execution ---> Shipping ---> Incompletion control for deliveries
    This is what the explanation is for the Procedure to be defined :
    "In an incompleteness procedure you group together the fields that are to be checked for completeness. If you have not entered data in one of the fields in the document, the document is incomplete. Depending on the status group you can block certain subsequent activities for the document."
    Regards
    VenkatRaman

  • Check TO & Picking status

    Is there a way wherein we can check the Picking status in the warehouse? I want to print the Production Orders only when i'm sure that the picking is done in the warehouse. Our system's current setup is that TRs are generated upon production order release. (WH receives this and transforms them into TOs )

    Hi Madhu
    Check with the transaction code mb26 -pick list
    or
    check through operation overview in display/change process order
    Thanks
    Reward if useful
    Edited by: K Saravana Kumar on Aug 7, 2008 2:07 AM

  • Issue relating to pick status

    hi,
    when i try to create a delivery through vl01n in the picking tab -the field over all pick status shows not relevant for pick i have checked tcode 0vlp relevant for picking is checked still the status shows not relevant for pick-pls guide

    HI
    If your plant is WM managed and, Picking has been done using Transfer order and same confimed then Over all piciking status will be completed or else your item many not be relevant for picking .
    Regards,
    Ram.

  • Change status automaticaly after digital sign

    Hi
    I need to change document status automatically after digital sign,
    Can any body help me how to do this?
    The only way I can think of is by routine at the status customization.
    Thanks

    hi,
    1. last tread i absorbed it says authorization object and custamization of Digital signature.
    A. I need to change document status automatically after digital sign?
    procedure like this.
    1. Use TC -  DC10--define document type,
    .or u can navigate by SPRO> Crass application functions>document management>control data> difine document type.
    2.Here u select your document type, to whicch u need Automatic Status Networking.
    3.Select define document statuse folder in the same screen. u develop ur document network.
    note: when u develope statuse net work, it will always triggers next status. for this next statuse would be change or approve like.
    4.Here u will find assigne digital sign field. here acually u enter your digital signaure[name] which u created erliear.
    5.save entries.
    6.Automatic triggering means u have to set work flow. once a person enters the signature for appropriat status, the doc would triggers next person[inbox], whos is approver or releaser.......like this u have to develop stause with signature mandatory to set workflow for automatic triggering, Both options is available in same screen.
    Benakaraj
    ??P

  • Pick Status in order row

    Hello fellow SAP users
    As stated in SAP note 1036919 the pick status in sales document rows is not reliable anymore becaus the sales order row can be split into serveral picklists and might have a diffrent picking status in each list.
    Our customer howevers is relying on this status for reporting and legal purposes.
    Has anyone encoutered this issue before? And what did you do to work around it?
    Kind regards,
    Andy Grootens

    Hello,
    Try it may it help you
    Make a UDF and entered manually row no.
    Thanks
    Manvendra Singh Niranjan

  • Picking is greyed out while i create delivery in Consignment Fill Up

    Dear SAP Gurus..
    Plz, advise,
    Picking is greyed out while i create delivery in Consignment Fill Up.
    I'm able to create Consignment sales
    Scenario:
    Comp A -->  Comp B --> Customer
    but Material should be remain in CompA value vise
    Only Inventory of Comp B will be hit.
    Thanks
    Gaurav

    hi,
    you need to check in two areas:
    OVLP - Item Not relevant for picking in item category.
    LT03 or subsequent functions at delivery level - for transfer order.
    balajia
    Edited by: balaji timmampalli achari on Dec 9, 2010 7:50 AM

  • Idoc to update picking status messages

    We have an interface from wms to sap which updates the picking status messages. Can anyone let me know what would be the idoc type to update picking status messages or do the status messages get updated automatically as soon as the actual picking quantity is updated?

    Picking status is updated when the picking quantity is updated.

  • Iphone4 shows unlooked, but no further reaction. can call this phone but no change, can't pick up the call. sim card out - not change, nothing happend

    iphone4 shows unlooked, but no further reaction. can call this phone but no change, can't pick up the call. sim card out - not change, nothing happend

    No. Call Apple Care and give them the serial number. They may be able to tell you who it is locked to.

Maybe you are looking for