Picking up the files in a particular order

In the sender communication channel i have mentioned the file name as plannedorder*.xml
And in the source directory i have 5 files , plannedorder1.xml,plannedorder2.xml,plannedorder3.xml etc
Now my requirement is xi has to pick the file in this order only.
I dont want plannedorder2.xml to be picked before plannedorder1.xml.
How can i achieve this.
Regards,
Divia

Hi
File Adapter allows you to configure the Processing Sequence of files for the Transport Protocol "File System (NFS)", which also determines the order for EOIO processing. Files can either be processed in ascending alphabetical order (Processing Sequence "By Name") or by their last modification time stamp (Processing Sequence "By Date"), where the oldest file is processed first. For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order

Similar Messages

Unable to pick up the file from Receive Location

BizTalk is unable to pick up the files from receive location.
My admin console is working so slow.
It is showing the problem of snap-in as follows:
I have checked all my receive location and its masking,it is working fine.
Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
It is not picking up the file from receive location.
I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
Prakash

For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance configured with your receive location is running. If the host instance is in
running state, restart the host instance and try.
Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
version of BizTalk and also ensure the service pack for your OS is updated.
Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Urgent!doubt in upload the file to a particular directory.

Hi
Actually i'm developing a site using JSP.
Main concept of the project is the user should be
able to access his files or dabases from anywhere
in the world thru internet via intranet.
i've placed upload option in my site.
each user should b given a separate directory.
can anyone tell me how to make the user to store
the file in a particular directory(the one alloted to him).
And to view the file, if the user enters the file name
it should open the file in the particular format.
i need the coding since i'm new to jsp.
can anyone help me or refer any site tht can solve
my problem?
thanx in advance.

I'd just answered a similar case. I believe this is what you are looking for;
<%@ page contentType="MIME-Type; Charset=Character-Set" %>
Read up on MIME-Type and Character-Set for info.
Here some exmaple;
By default:
<%@ page contentType="text.html; Charset=ISO-8859-1" %>
Show an MS Excel file;
<%@ page contentType="application/vnd.ms-excel" %>
or
<%
String mimeType = "application/vnd.ms-excel"
response.seContentType(mimeType);
%>
Cheers

Import Server not picking up the file

Hello,
I have 2 repositories running on the same server. Import server picks up file for one repository, but not for the other. What could be the reason? Also, for the repository, import server not picking up the file, workflow also does not send an email notification.
Please help
Subhash

Hi Subhash,
Hope you are not using the same Import Server for both the MDM Servers. If yes then you need to mention the MDM Sevrer name in the MDM Server parameter of MDIS.ini. Check the parameter list of MDIS.ini file.
If your repository has password for Admin user then you need to specify the same in MDIS.ini file under your repository section for User = Admin and Passowrd = [Admin password]. Remove the E from the PAsswordE and give the password for Admin user. Once done restart the Import Server and check again, parameter Password would have converted to PasswordE.
For Email Notification two things you need to check:
1. You should have specified the mail server address in MDS.ini file under your repository section for parameter Mail Server.
2. Workflow owner should have entry in Email address field of the user. Check this in Console under Admin -> Users.
Regards,
Jitesh Talreja

Xi server not picking up the file

Hi,
My Scenario is flat file to xml.I have declared all the file content conversion parameters and placed the input file in server.But the thing is XI server is not picking up the file.What could be the error.Does any error in content conversion has to do with XI-Server not picking up the file.
Thanks,
Srinadh

Hi Bhargav,
go to SXMB_IFR -> Runtime Workbench -> component monitoring -> adapter engine -> adapter engine monitoring or to communication channel monitoring to see the error in your sender file adapter..........rectify this error in comm channel in ID.......set filemode to delete..........then activate yur comm channel.........then your source file will be picked by XI........
Thanks,
Rajeev Gupta

How can i open the directory/folder and read all the files inside it in order and then close it?

How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
thanks

In the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Alternative BOM picking at the time of creating sales order.

Dear All,
I have on requirment and it is as follows.
I have 3 alternative BOMS for one material in same plant.Now sales order is created for this materila which alternatibe BOM will system pick.
If there any possibility to customise alternative BOM picking at the time of creating sales order.Please let me know what settings do I need to configure for this.
Thanks for your support and time.
With Rgds,
Babu

hi,
this is to inform you that,
1. since you have 3 alternative BOM's. so by default system will pick up that BOM which is first according to hirearchy level at the plant level.
alternatively if the same material is going to be used for different purpose (PRODUCTION OR PLANNING), SECOND ALTRENATIVE bom will be picked.
2. you will have to assign the BOM which you want to pick add it to the picking list (ASSEMBLY OF THE PRODUCTS/COMPONENTS).
in CO27 - maintain the range of components at component level with plant as same for which you have already created a BOM.
create a sales order according - that alternative BOM will be directly assigned to the sales order.
please check and confirm.
balajia

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

Pick & Delte the File from application server...

Dear All,
How to Delete the file(text data - Notepad file) from Application after picking it for process.
regards.

Hi
Use OPEN DATASET, CLOSE DATASET to read the file and DELETE DATASET to delete file after reading it.
DATA: FILE(80).
DATA: T_FILE(1000) OCCURS 0 WITH HEADER LINE.
OPEN DATASET FILE IN TEXT MODE.
IF SY-SUBRC = 0.
    DO.
      READ DATASET FILE INTO T_FILE.
      IF SY-SUBRC <> 0. EXIT. ENDIF.
      APPEND T_FILE.
    ENDDO.
    CLOSE DATASET FILE.
    DELETE DATASET FILE.
ENDIF.
Max

My proxy service (messaging) with sftp protocol is not picking up the file

Hi ,
I have proxy service , which polls for a file in a regular interval , this has stopped working suddenly . The bad part is i am not able to find any log related to the service in either the domain logs or the server logs.
I tried to disable the service and re-enable it , but it was of no use .
Please help me in this , what can i look for next ?

Bala,
I just extracted the entire B2B setup as a ZIP file and imported the setup in a DEV UT01 enironment. The B2B was able to successfully pick up the B2B messages using the same ftp channel.If from one env B2B is able to pick the message using same settings then it must be a network issue. You may like to change the B2B log level to debug and then try to disable and enable the channel. See if you get anything in the log.
You may also try to create an outbound agreement and see if you are able to send message to that FTP location from the same environment.
Regards,
Anuj

Sender File Adapter not picking up the file

Hello Experts,
I have configured a sender file (FTP) adapter. All the configurations are right. The name of the file is given exactly as it is. The processing mode is Delete.
The scenario was running fine till today. I only made changes to the path from which it has to pick the file. I have checked the path numerously and it is correct.
But the file is not being picked up.
Monitoring the communication channel shows no errors. It has the green indicator. No idea what is happening.
Please Help,
Regards,
Merrilly

Hi
try to make some changes anf then again save and cativte the adapter. may be the adapter is not being activated.
also check whether the cache is refreshed or not.
or u can also check in the communication channel monitoring the channel is start or stop. if stop then start the channel and then try again.
if u still face the problem please reply me back.
Thanks
Rinku

Saving the file to a particular location!!!

Hi,
I have to upload a file and the file uploaded should be saved to aparticular location. For Example if i upload a file named 'eg.jpeg.' , how can i save this file to a particular location in the system?
Regards,
Shiny

Hi,
If you just want to display it within the same BSP application, try this:
<htmlb:image src="eg.jpg" />
If you want to retrieve the image from a non BSP application, I think you should look at logical files and paths (transaction AL11).
Regards,
Tanguy

Problem in the picking up the file

hi all,
i am working on agile to sap,
here PI has to pick .pdx (or) .axml files and thses files are zip files again, open these files winzip, then those can be extracted in xml files.
now PI has to pick the .pdx file and put it as .pdx filein the reciever side.
now my problem is iam able to pick the .pdx file but it is not pushing the file in reciever side.
in sxmb_moni, iam gettingh this error.
SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_axml_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_axml_:</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
thanks
madhav

Hi Madhav,
In your case you need to unzip the files from .pdx format to xml format for that you need to use the PayloadZipBean module in the sender communication channel.
The details you need to specify in the processing sequense are as follows:
Modulename: AF_Modules/PayloadZipBean
This should be placed before the callsapadapter
Than in the module configuration you need to specify the following:
paramatername :zip.mode
parametermode:unzip
Thanks,
Bhargav.
Note:Award points if found useful

Outbound process-Picking up the file automatically

Hi All,
In outbound processing,we have configured to get the output file in the XML format and used the EDI_PATH_CREATE_DATE_TIME function module in WE21 to get the output file along with the time and date.We have to pick up the XML file and do the FTP(for doing the FTP tranfer we have written one ZPROGRAM) transfer to the EDI Subsystem.The problem we are facing here is that the created XML(along with the time and date)0utput file should be automatically picked by the ZPROGRAM written for ftp transfer.Previously we have done that by giving manually the file name as a inputparameter in the ZPROGRAM and then transfer it to the EDI Subsystem.
Kindly give a suggestion as soon as possible.
Thanks in advance.
Raj.

Hi,
can u put the file in a standard place and the modify the zprogram to read the file in the specific location?
Or, u can use logical files. With it, u can use custom function to construct the whole path of the filename to read.
For more informations about logical files (and how determine the namefile runtime), u can read the in-line documentation of the file field of the trx "FILE"
Hope it helps
Bye
Andrea
Pls reward if it helps

I made a book called Mya in Iphoto and sent it to Apple to which I received. Since then the book crashed out of Iphoto and wondered if Apple has the file so I can order it again.I have a back-up called Rocstor and can't retrieve it

I made a book called Mya in my Iphoto projects and it has crashed out of Iphoto. I was wondering if the Apple company still has that file so I can order the book again. I backed up my data in a machine called Rocstor last october but when i went to retrieve that book it said I had to download Iphoto back into my computer and i had already updated Iphoto with Ilife and it would not go back in

Apple keeps files for 40 days for reorders according to a previous web site - give them a try
LN
BTW - Once a year is NOT a backup - I use TM so I have at least one per hour plus do a daily clone for a second one and an occasional offsite one (10 or 12 times a year) for the third one

Picking up the files in a particular order

Similar Messages

Maybe you are looking for