PIM Item upload - Item Organization assignment access privilege issue

After doing my analysis and scanning through Oracle Support website, I am posting this question here.
Scenario: Item 100 was created in org X by user A using PIM Item Upload. Now, a user B is trying to create the same item in org Y and getting the error INV_IOI_ITEM_ORGASSIGN_PRIV. If the same user A tries to create the item in org Y, it works fine without any issue.
I have checked that the ICC definition (Development Manager -> Setup -> Setup Workbench) has all users added under the People tab.
I am sure I am missing a basic step here that will allow a user B to create an item 100 created by a user A in org X in a different org B. Please advise.
Edited by: 881114 on Nov 8, 2012 6:56 AM

Sir,
For this program the two value sets used are
INV_ITEMASSIGN_HIER_ORIGIN (this is C1 for u)
INV_ITEMASSIGN_HIER_WITH_SRC (this is not showing the expected value) this is dependent value sent and is checking that INV_ORGHIERARCHY_PVT is contained in the previous value set.
Can you please confirm that the responsibility from which you are running the request has the C2 organization access?
Thanks
Karthik.

Similar Messages

Create User Groups and assign Access privileges in Reports

Hi All,
Could you share the document or explain which explains about the Standard method to create User Groups in CMC for BOBJ XI 3.1 architecture.
And how to assign privileges to user groups like view reports, folders, privileges to create/edit reports etc.
Environment:
- Backend - BW
- and BO XI 3.1 sp3
Thanks,
AK

BO XI 3.1 Administration guide
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_bip_admin_en.pdf

Mac mini sudden death after access privilege issue.

Good Afternoon,
I have a Mac mini running OSX 10.5.8.
Today, I noticed that I couldn't access the Macintosh HD drive on the desktop as I did not have sufficient privileges. When I got-info on the drive, in sharing and permissions, I saw that "admin" suddenly had write-only privileges.
I could not 'unlock' the padlock to change the settings, it wouldn't react or ask for a password or anything. (I am the admin on the mini).
So I thought maybe it's just a restart needed; we run it for quite long times without a shut down.
Now it won't get past the gray Apple with spinner boot screen.
I've tried removing it from the mains to check if maybe the RAM would 'reset' or anything, but that hasn't helped.
Then, I got my OSX installation DVD to attempt booting into the repair function but, as I have the bluetooth keyboard, it won't register the keyboard at the early stage in the boot process - I cannot hold down C or other keys to boot into anywhere.
Having researched a bit, I came across others who also met this combination of issues, but none involving Macintosh HD itself and still being able to get to the gray Apple screen.
Any ideas on how to take it from here?

Then, I got my OSX installation DVD to attempt booting into the repair function but, as I have the bluetooth keyboard, it won't register the keyboard at the early stage in the boot process - I cannot hold down C or other keys to boot into anywhere.
Hi- Stupid question, but did you actually try it? It should work, as the bluetooth drivers are one of the first things loaded before the apple logo even appears.
Power off, power on, hold down the C key (or the option key), and you should be accessing the install dvd with no problems.
Failing that, perhaps you can borrow a USB keyboard from the office or from a friend, and then do it from there.

Organization Hierarchy related setup for Item Organization Assignment prog

Hi,
Could someone please help us with this..we have a Master org M1 , a child org C1 already existing and has items already assigned to it.
Now we have created a new org :C2 with the Master org still as M1. Now we want to assign all the items currently assigned to C1 to this newly created org C2.
Hierarchy Definition :
1. In the Organization C1 (after changing org) we give the name to a new Hierarchy : Test Hierarchy, set the version as 1, with the start date against it.
Then in the Organization block search for the NAME field as C1 org name..this comes as well.
Then in the Sub Ordinates section , we enter the name as C2 (This is the org to which we need to assign all the items currently assigned to C1 org)
Then we save this Test Hierarchy definition.
Item Organization Assignment program
2. Running the Item Organization Assignment program : Here we change the org to C1 first (source org), then sub mit the program . Parameters :
Source org : C1 org name
Hierarchy Origin : C1 org name (since this is my starting org or the sourcing org from where i need to assign my items)
Hierarchy : Now here the issue is happening as we are not getting the Test Hierarchy which we have created above in the options to choose from...
Since we had created the Test Hierarchy in the C1 org , we should have got this hierarchy name to show up in this parameter..
Could someone please help as to what could be the issue...we are stuck because of this.
Thanks

Sir,
For this program the two value sets used are
INV_ITEMASSIGN_HIER_ORIGIN (this is C1 for u)
INV_ITEMASSIGN_HIER_WITH_SRC (this is not showing the expected value) this is dependent value sent and is checking that INV_ORGHIERARCHY_PVT is contained in the previous value set.
Can you please confirm that the responsibility from which you are running the request has the C2 organization access?
Thanks
Karthik.

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

GL Line Item Upload: Assignment to Profitability Segment

Hi,
I have a problem while loading GL line items using RFBIBL00 when assigning characteristic values to the "Assignment to Profitability Segment" Screen (SAPLKEAK,0300).
I am passing the values thru RKE_* fields in BBSEG structure but the program is assigning these values to a different field in FB01 transaction and the upload is failing due to this.
E.g.: For field RKE_BRSCH in BBSEG structure I have a value "KUW" but when I run the batch input for FB01, in Screen SAPLKEAK 0300, this value is getting populated in another field ARTNR.
I did search oss and could not find any reference to this issue ?
I assume there is something which need to be done at CO-PA configuration, any help wrt to this is highly appreciated.
Thanks,
Ravi.
Message was edited by: Ravi Gopan

Murugesh,
Field Mapping is done correctly ... I just checked again.
Waiting for FI/CO consultant to respond to this, I feel this has something to do with "Activation of fields in Profitability Segment"
Will post one this is solved.
Thanks,
Ravi.

Assigning the mass items to new organization

Hi to all !
I have created new organization and i have to assign 30,000 items to this organization
Is there any API or procedute by which i can assign all these items to organization...?? instead of manually assigning the items....
Plz send the answer as it is urgently....
thanks..
lalit kumar

dear,
I hv done this and getting this error
/uatcfm/uatccomn/util/jre/1.1.8/bin/java: No such file or directory
usdsop: exec failed during spawn+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
End of log messages from FND_FILE
oracle.apps.inv.setup.cp.CopyLoader
Program exited with status 1
Plz do the needful..
Thanks..

Question on the value of an Upload item

Hi all,
I have an upload item (:P100_UPLOAD) with a Submit button. When I click on Submit I notice that the value of the upload item is different if access it from javascript or from PL/SQL process.
From javascript (using html_GetElement('P100_UPLOAD').value), it gives me : C:\Documents...\myfile
and from PL/SQL (:P100_UPLOAD) it returns something like F30011/myfile ...
Could someone explain me the difference ?
Thanks a lot,
Othman

Othman,
Whenever an ApEx page containing a File Browse... item is submitted, if a file has been selected it will be uploaded and stored in the wwv_flow_file_objects$ table (which is accessible via the APEX_APPLICATION_FILES) view. Part of this process includes giving the file a unique ID (such as "F542896243/myphoto.jpg") which is stored in the NAME column in this table. To enable you to then reference and find this file in the APEX_APPLICATION_FILES view, ApEx also sets the value of your File Browse... item in session state to be the same as this unique ID.
The value you get with javascript is the value that the HTML element itself has (i.e. the full local path to the file you selected.)
Hope that makes sense,
Andy

AP/AR Open Item upload

Hi,
For AR/AP Open item upload am using the standard/Direct input - program 'RFBIBL00'.
I have a problem while trying to do the 'field mapping and conversion rules' step.Which field in SAP should be mapped to the Vendor number or Customer number in the legacy system data?
Please advice.
Regards,
Sophia Xavier

Hi
If you are asking about the field name of Vendor Number and Customer Number then it is LIFNR and KUNNR respectively. While uploading these 2 field names should be mapped.
Plz assign points if it is helpful to you.
Regards
Tapan

How to handle table control in BDC while uploading item details for anorder

How to handle table control in BDC while uploading item details for an order?
What is the use of CTU_PARAMS structure in BDC?
In Finance I have done some changes to the layout set by coping to a zscript(duning letter) and how can assign the print program?
What is the process to test the finance script?
How can I see the print preview whether it is coming correctly or not?
Thanks in advance.
Regards.
Abhilash.

hi,
for the bdc control refer the following link:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ctu_params:
refer to the link
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/dataTransfers-LSMW%2CALE%2C+BDC
reward if useful,
thanks and regards

Uploaded file (via front-end) created as a Media Download item (Literature Item)?

Is it possible to have an uploaded file (via a form or webapp edit form on the site front-end) to be stored/created as a Media Download item (Literature Item)? Or alternatively, is it possible to secure a file that has been uploaded on the front-end (by 'secure' I mean cannot be access outside of a secure zone)?
My aim is to have customers upload files into their secure zone and maintain that security on the uploaded file so other cannot access them. I can't see that this will be possible but hopefully someone might have some creative ideas to get around it.

Hi Adam,
This can be implemented via web apps, please go through the web app tutorials here to know more about them - User manual
You can set up a secure web app to take the submissions from the users and include file upload in that submission. Those submissions are visible to only the user who submits it, unless, you enable the option where every one can see/edit it.
Note: Via the web apps, the files that are uploaded, they go into a folder with a random name which is directly accessible on the internet, even though, on the site, through the web app items, only the logged in users can see it. By this I mean that anyone who has the direct link to the file will be able to access it and it can also be indexed by search engines. So, when it comes to using the work around of web apps to implement this function on your site, make sure to take measure to block Google bots from indexing the files.
Check this article to know more on how the GoogleBot works - Googlebot - Webmaster Tools Help
Regards,
Abhishek Maurya

How to upload Vendor/Customer Open items through Items

Hi,
I want to upload the data for vendor open items / customer open items ( F-02 Transaction )through LSMW. There is no Object and methods are present for Batch Input or direct input. Is any BAPI or IDOC is present for this. If available, Please provide it.
Thanks & Regards,
Dhiraj.

Hi Harish ,
can u tell me Y want to Upload data for Open Items ? let us know the requirement.
as per my understanding : Open Items means Item which are ready to receive / send amt to Vendor / Customer.
Regards
Prabhu

How to maintain different prices for same item in different organizations

hi all,
We have noticed that the list price of an item at Item Validation Org level is getting defaulted when creating requisitions. We want to maintain different prices for the item for different organizations, so that the prices will be properly defaulted to requsitions depending on supplier and receiving org.
We found one way of doing this. Using contract purchase agreement and Advanced Pricing price lists. Can anyone please let us know if there is any other way of achieving this??
Also, I have a question regarding Advanced pricing Price Lists. I performed following steps.
1.Set the QP: Licensed for Product profile to Purchasing
2.Create and approve a contract purchase agreement in Oracle Purchasing
3.Define Price Lists and Price List Lines (optional)
4.Define sourcing rules and ASLs to automatically default source information onto requisition lines. Associate Contract to ASL.
5. This will enable Oracle Advanced Pricing integration in the following Oracle Purchasing functionality:
Requisition pricing
Purchase order pricing
But when I create requisitions, the price from price list is not getting defaulted automatically. In requisitions form, if I go to source tab and select source as a Contract Purchase Agreement, then the price from price lists is getting defaulted. Is there any way where the source for the requisition can be automatically defaulted to Contract and the price can be picked from price lists??

Can oyu not make it an organization level item and specify the proce there instead of keeping it a master level item?
Regards,
Utsav.

Item category and Account assignment category field grayed out in PR/PO

Hello all,
While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
Is there anyway the fields can be made modifiable in ME22N/ME52N ?
Please help!
regards,
Soumyadeep.

Hi,
Well, actually you can control the Field settings in customization of Document Type. Check the following :
Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
Hope this helps,
Best regards
Amit Bakshi

Handling unit 1000001227 contains an item that cannot be assigned

THE HANDLING UNITS ARE CREATED WITH THE BATCH MANAGED MATERIAL HU02.
AT THE TIME OF CREATING DELIVERY,WHEN I GO TO SELECT THE HANDLING UNITS IN EDIT>PACK THE SYSTEM GIVES ME FOLLOWING WARNING,
Items subject to batch handling w/o batch assignment could not be packed
AND AFTER ENTERING THE SYSTEM TAKES ME TO THAT PACKING SCREEN AND WHEN I SELECT MY HANDLING UNIT THE SYSTEM GIVES ME THE FOLLOWING MESSAGE AND DOESN'T SELECT THE HANDLING UNIT,
Handling unit 1000001227 contains an item that cannot be assigned
ALTHOUGH THE SYSTEM SELECT THE HANDLING ONLY WHEN I MENTION THE ALL BATCHES,QUANTITY AND WAREHOUSE OF THE ITEM IN BATCH SPLIT.
ANY ANYONE TELL ME THAT HOW CAN I SELECT THE HANDLING UNITS WITH OUT MENTIONING ITS BATCHES IN THE BATCH SPLIT.
REGARDS:VIJAY KUMAR

Hi Vijay,
Based on the below error Items subject to batch handling w/o batch assignment could not be packed.
I think while creating the delivery check whether the system allocated the correct batch or not. If not created the batch then click on Batch split and Batch determination.
Then from the menu Batch determination -> W/o classification. Then system will show the all batches. Then select the coorect batch and copy the Qty.
Then try to do packing edit - > pack.
I think it will work fine.
Regards,
SK

PIM Item upload - Item Organization assignment access privilege issue

Similar Messages

Maybe you are looking for