Pin removal problem in iPlanet CMS / DS

hi,
Can anyone throw some light on the problem I'm having:
How iplanet CMS removes pins for which the pinattr atribute is not mapped to
"pin" ,but some other artibute.
The CMS.cfg gets updated with the proper value of pinattr viz
auths.instance.PinDirEnrollment.pinAttr=pin/adppin as given through the
GUI,the Pin based enrollment works fine to the point of authenticating
against the uid ,password and PIN supplied .But after certifcate isuual if
the pinattr value is set to an attribute which is not named "pin" ,it fails
to remove the pin for that entity .
The exact reason for not removing cant be traced until unless we actually
get to debug the plug-in PinRemovalListener.java and PinRollment realted
java files.
I am not able to figure out why it is not able to take the correct mapping
at the time of pin removal which it could do at the time of pin
authentication.
Any information / pointers will be greatly appreciated.
TIA
- toohey

Did the packages install correctly?
If yes, run the following command to configure a DS instance:
/usr/ds/v5.2/sbin/directoryserver configure -debugMessage | tee config.out
This will turn on lots of debug info and send it to a file called config.out. This should help you determine your problem.
HTH,
Roger S.

Similar Messages

IPlanet CMS 4.7 and PGP 8.03

Hello, I am trying to use iPlanet CMS 4.7 as a CA for PGP.
Does anyone know how to configure iPlanet CMS in order to work with PGP?
Thanks for your feedback!
Cheers, Stefan

Hi there,
I believe that the issue you are encoutering looks like the following:
"The CMS installation wizard fails when creating the internal database.
I'm running the installation wizard and it fails to accept the information I enter for the internal database. I'm getting the "Invalid Credentials" error message.
When creating the internal database, which is an instance of Netscape Directory Server 4.1, the CMS installation wizard performs some LDAP operations by calling command-line tools, such as ldapmodify. These tools are invoked by /bin/sh on Solaris. One of the command-line arguments to the tool is the bind password. If this password has any other character interpreted by the shell (for example, #, $, %, *, (, ), -, ', ", ?, \, |, ~, or `), the password gets mangled by the shell, causing ldapmodify to fail (with an "Invalid Credentials" error), which in turn causes the wizard to fail.
To workaround the problem, use an alphanumeric password for the internal database. [# 357672]"
The above information was found in an old FAQ of CMS 4.1x.
Hope this would help.
Cheers / Damien.

I got a big problem that iPlanet 6.0 SP2

Hi,
I got a big problem that iPlanet 6.0 SP2 is in cycle of restart.
The web server's error logs is the following:
[16/Jul/2002:00:30:05] info ( 8545): successful server startup
[16/Jul/2002:00:30:05] info ( 8545): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[16/Jul/2002:00:30:09] info ( 8599): Installing a new configuration
[16/Jul/2002:00:30:09] info ( 8599): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:30:09] failure ( 8599): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:30:09] info ( 8599): A new configuration was successfully installed
[16/Jul/2002:00:38:14] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:38:16] info ( 9053): Installing a new configuration
[16/Jul/2002:00:38:16] info ( 9053): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:38:16] info ( 9053): A new configuration was successfully installed
[16/Jul/2002:00:38:16] failure ( 9053): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:04] failure ( 8545): Child process admin thread is shutting down
[16/Jul/2002:00:46:05] info ( 9496): Installing a new configuration
[16/Jul/2002:00:46:05] info ( 9496): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:00:46:05] failure ( 9496): Error accepting connection -5928, oserr=130 (Connect aborted)
[16/Jul/2002:00:46:05] info ( 9496): A new configuration was successfully installed
[16/Jul/2002:02:43:31] failure (15596): Child process admin thread is shutting down
[16/Jul/2002:02:43:32] info (16212): Installing a new configuration
[16/Jul/2002:02:43:32] info (16212): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:02:43:32] info (16212): A new configuration was successfully installed
[16/Jul/2002:02:43:32] failure (16212): Error accepting connection -5928, oserr=130 (Connect aborted)
You can see child process is shutdown and restart it.
I don't know what's problem is.
And other problem is the following:
[16/Jul/2002:16:10:25] catastrophe (23966): Server crash detected (signal SIGBUS)
[16/Jul/2002:16:10:25] info (23966): Crash occurred in NSAPI SAF NSServletService
[16/Jul/2002:16:10:25] info (23966): Crash occurred in function direct_identityHashCode from module /usr/java1.2/jre/lib/sparc/libjvm.so
[16/Jul/2002:16:10:25] failure (23454): Child process admin thread is shutting down
[16/Jul/2002:16:10:26] info (24006): Installing a new configuration
[16/Jul/2002:16:10:26] info (24006): [LS ls1] http://xxx.xxx.xxx.xxx, port 80 ready to accept requests
[16/Jul/2002:16:10:26] failure (24006): Error accepting connection -5928, oserr=130 (Connect aborted)
FYI, here is our environment:
# /usr/java1.2/bin/java -version
java version "1.2.2" Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
# uname -a
SunOS wagency2 5.6 Generic_105181-31 sun4u sparc SUNW,Ultra-4
Sun Enterprise 450 (2 X UltraSPARC-II 400 Mhz, 2G Memory
If you have any solution and experience, please let me know.
Thanks,
Barney Kim
[email protected]

Barney,
from the error log the problem seems to be related to the use of an external JDK. Try reverting back to the original JRE. See if that helps, i.e., the server starts up fine. Use the administration GUI and select Global Settings > Configure JRE/JDK Paths. On the screen that appears, you can configure the path to the JRE. The default would be <server-root>/bin/https/jre.
If that works fine, you might download a more recent version of the JDK. iWS 6 SP2 supports JDK 1.3.1.
Hope this helps.
Best regards
Rodrigo

Blackberry Pin release problem from Emitac Mobile Solutions LLP

I just bought an old blackberry phone.
Curve 9360
PIN: {REMOVED}
IMEI: {REMOVED}
I want to use the BIS service but the operator just told me that the
PIN is already registered at some different operator and you have to
release the pin from there.
The carrier is Emitac Mobile Solutions LLP.
Please suggest.
Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

You have two possibilities so far as I know.....
Track down last owner, or the owner that had the BIS, have the individual contact the carrier (not yours, the other carrier) and do whatever it takes to get the PIN released.
Figure out the other carrier. Explain the situation. Ask for help.
It's a tall order. I think hope is slim, but who knows.
If the device instead is actually blocked because it was reported stolen at some point, or someone walked out on finishing payments, you have no hope.
- Ira

Pin removed header usb3

Hi,
I bought a X79A GD65(8D). I installed it on my case, no problem.
I connected my usb3 on the header then when i disconneted the cable, but a pin of the header removed
Can't use usb 3. It's the first time when it arrives at me
I would to know if i can use the warranty.
Thank you.

no problem! only thing not covered by Warranty is if you Physically damage it with force but a single pin either missing or it snapped very easy is a manufacturing defect as that usb3.0 header should withstand at least 100 insertions and removals not 1 like you seem to have there!
so just say it came like that and you didn't notice to avoid any problems with them!

Problem with Iplanet/JWS 6.1 connecting to Weblogic on Solaris

We have an application which runs JSPs and Servlets on SJSWS/Iplanet 6.1 and uses
EJBs on
Weblogic 8.1 for database access.
When the Weblogic server is running on a Windows box, there is no problem accessing
the EJBs. But
we have not been able to get connected when the Weblogic is running on a Solaris
box.
Also, we don't have a problem connecting to the Weblogic on Solaris from a Tomcat
webserver, so
the EJBs and URI are correct.
Any help appreciated.
Here's the stacktrace of the exception:
info: CORE3282: stdout: 10:16:46,296 ERROR [UserMaintenance] Error looking up
user.UserManagement.
Exception is javax.naming.NamingException: Unhandled exception in lookup.
Root exception is org.omg.CORBA.UNKNOWN: vmcid: 0x0 minor code: 0 completed:
No
info: CORE3282: stdout: at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
info: CORE3282: stdout: at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
info: CORE3282: stdout: at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
info: CORE3282: stdout: at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
info: CORE3282: stdout: at java.lang.Class.newInstance0(Class.java:306)
info: CORE3282: stdout: at java.lang.Class.newInstance(Class.java:259)
info: CORE3282: stdout: at com.sun.corba.se.internal.iiop.messages.ReplyMessage_1_2.getSystemException(ReplyMessage_1_2.java:90)
info: CORE3282: stdout: at com.sun.corba.se.internal.iiop.ClientResponseImpl.getSystemException(ClientResponseImpl.java:105)
info: CORE3282: stdout: at com.sun.corba.se.internal.corba.ClientDelegate.invoke(ClientDelegate.java:314)
info: CORE3282: stdout: at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
info: CORE3282: stdout: at weblogic.corba.cos.naming._NamingContextAnyStub.resolve_any(_NamingContextAnyStub.java:80)
info: CORE3282: stdout: at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:213)
info: CORE3282: stdout: at weblogic.corba.j2ee.naming.ContextImpl.lookup(ContextImpl.java:171)
info: CORE3282: stdout: at javax.naming.InitialContext.lookup(InitialContext.java:347)
info: CORE3282: stdout: at com.cmg.util.ejb.EJBHomeFactory.lookupHome(EJBHomeFactory.java:77)
info: CORE3282: stdout: at com.cmg.adp.tpc.UserMaintenance.getManager(UserMaintenance.java:94)
info: CORE3282: stdout: at com.cmg.adp.tpc.LogonAction.doAuthenticate(LogonAction.java:133)
info: CORE3282: stdout: at com.cmg.adp.tpc.LogonAction.doExecute(LogonAction.java:94)
info: CORE3282: stdout: at com.cmg.adp.tpc.BaseAction.execute(BaseAction.java:51)
info: CORE3282: stdout: at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:465)
info: CORE3282: stdout: at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
info: CORE3282: stdout: at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1422)
info: CORE3282: stdout: at com.cmg.adp.tpc.PaycardServlet.process(PaycardServlet.java:178)
info: CORE3282: stdout: at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:523)
info: CORE3282: stdout: at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
info: CORE3282: stdout: at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
info: CORE3282: stdout: at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
info: CORE3282: stdout: at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
info: CORE3282: stdout: at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:293)
info: CORE3282: stdout: at java.security.AccessController.doPrivileged(Native
Method)
info: CORE3282: stdout: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:289)
info: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
info: CORE3282: stdout: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
info: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
info: CORE3282: stdout: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
info: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
info: CORE3282: stdout: at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
info: CORE3282: stdout: at com.iplanet.ias.web.WebContainer.service(WebContainer.java:586)

when i access
http://localhost/portal
A serious error has occured in the Desktop. This may have been caused by a mis-configuration on the server.
Please report this problem to your administrator.
Return to front page

How can pine users access their iPlanet account without identifying first to login, and then when they run pine?

At University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank You

At University we have just completed migration to iPlanet Messaging Server 5.2. Users of UNIX and pine now have to identify twice to get email. As stated in the question, they have to login to their shell, and then pine forces another login. Each additional time they run pine to check email it requires a new login.
Is there any way to get rid of the additional authorizations required to read email after someone is successfully authenticated to our own student/faculty servers? Perhaps adding some sort of Kerberos ticket system?
Thank You

S-video on 7-pin cable problem

Hi, I have problem with my s-video on laptop 3000 N200 (0769). When I connecting s-video 7-pin cable to the laptop - other side to TV (chinch), nothing happend. No CTRL+F7, no detection even when I try open gma control panel. BUT when I connecting 4-pin cable to the laptop - other side to TV (chinch) I have a black & white picture, when I click on gma control panel icon. So the s-video is working but seems only on 4-pin cable (but why in B&W?) And why s-video doesn't work on 7-pin cable ?? Any sugestions?
Sorry for my english
Best regards, pepe99.

First of all, I can't enter to the options of GMA when I'm connected with 7-pin s-video (because there are no connection/nothing happen) These options only enable when I connect 4-pin svideo to laptop. And then I could change PAL/NTSC - but there are no changes. My TV don't have option to change system, I'm from Poland so I believe it is PAL system BUT What's going on with this 7-pin connector??????? Cable was check on another laptop with 7-pin input - guest what? There was beautiful COLOR picture - cable is OK.

Context lookup problem in iplanet application server 6.0 sp3?

Hi all,
I am writing codes in the following enviornment, iplanet application server 6.0 sp3 with iplanet web server 4.1 sp7 in Window 2000.
When I tried to login to the system, error occured when i try to lookup context for my session bean.
The error message is as follows:
login_process.jsp: Home / Remote Error:String index out of range: -7
[10/Apr/2002 18:09:10:5] error: Exception: SERVLET-execution_failed: Error in ex
ecuting servlet JSPRunnerSticky: java.util.EmptyStackException
Exception Stack Trace:
java.util.EmptyStackException
at java.util.Stack.peek(Stack.java:86)
at java.util.Stack.pop(Stack.java:68)
at com.netscape.server.deployment.AppComponentDescriptorUtil.popCurrentAppComponent(Unknown Source)
at com.netscape.server.servlet.servletrunner.AppInfo.popWebAppDescriptor(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown Source)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
could anyone suggest a method to solve the problem?
Thx very much!

There is a major security breach in authenticating
iPlanet Web Server 6.0 SP3 and SP4 using Sun ONE
Directory Server. Using a valid user id, any
password except null string would allow user access
the restricted resources. iPlanet Web Server 6.0 SP5
and 4.1 SP12 worked fine with similar configuration.Did you get an answer for this?
We are having the exact same problems with our iPlanet Web server 6.0 SP3.
thank you.

Custom Tag Problem With iPlanet

Hi,
I've followed the instructions for creating Custom Tags located at: http://docs.iplanet.com/docs/manuals/enterprise/41/rn41sp9.html#18776. I'm using the examples provided and am still getting the:
org.apache.jasper.JasperException: Unable to open taglibrary /jsps/test-tags.jar : com.sun.xml.tree.TextNode
error. I've followed the instructions "Make sure you have the DOCTYPE in your taglib.tld..." but I still get the error.
iPlanet 4.1 Enterprise on Windows 2000
Any ideas?
Thanks in advance.

Hey i am also getting the same error, please let me know if u had solved this problem. i have copied the error message below
[25/Feb/2002:15:00:46] info ( 260): JSP: JSP1x compiler threw exception
org.apache.jasper.JasperException: Unable to open taglibrary /jsps/test-tags1.jar : in is null
     at org.apache.jasper.compiler.JspParseEventListener.handleDirective(JspParseEventListener.java:708)
     at org.apache.jasper.compiler.DelegatingListener.handleDirective(DelegatingListener.java:119)
     at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:190)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1048)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1022)
     at org.apache.jasper.compiler.Parser.parse(Parser.java:1018)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:173)
     at com.netscape.server.http.servlet.NSServletEntity.load(NSServletEntity.java:230)
     at com.netscape.server.http.servlet.NSServletEntity.update(NSServletEntity.java:149)
     at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:453)
[25/Feb/2002:15:00:46] warning ( 260): Internal error: Failed to get GenericServlet. (uri=/web/jsps/test-tags.jsp,SCRIPT_NAME=/web/jsps/test-tags.jsp)

Problem Installing iPlanet WebServer on Intel(P4) with Solaris8 Operating System

Hi,
Let me know, What problem(excatly) did you faced while installing iWS(Any Error) and what is the version of iWS are you trying to install?
Btw. Are your trying to install iWS in solaris on intel platform. If that is a case it is not supported & certified by iPlanet.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Problem accessing iPlanet with Firewall

We have iPlanet 4.1 SP9 webserver installed in Solaris 8. The server is configured with IP address 10.98.23.17. We are able to access our JSP web application successfully thru intranet without any firewall.
But, we face problems while accessing with Firewall. I will explain the situation below :
We have another network with ip range 193.1.1.XXX. There is a firewall between 193.1.1.XXX and 10.99.23.XXX.
When the user in the 193 network types URL as htp://193.1.1.38/test which is the firewall IP, the firewall does the NATting and handover the request to 10.98.23.17. The reply from the iplanet to the user is coming back as http://10.98.23.17/test. Since, 10.98.23.17 is not reachable from 193 network, he is not able to access the web application.
I want the reply from iPlanet to the user to come as http://193.1.1.38/test. How to solve this problem ? Kindly help me ?
TIA
Shaik

It sounds like you need to modify the ServerName line in the config/magnus.conf configuration file to reflect the externally visible hostname or IP address. In your case, the config/magnus.conf file should contain the following line:
ServerName 193.1.1.38

Calling servlet problem in iPlanet web server.

Hello, friends.
I have installed iPlanet web server 6.0. After installation I am using the default virtual server only. Thus, for all testing pages also, I use the default Document Root only (C:\iplanet\servers\docs\testsite) (I think, here "docs" is the default document root, right? If I am wrong, please correct me). I have got 2 JSP pages and 1 servlet. I put the JSP pages, into "testsite" folder and put the servlet into a folder called "myservlets" (C:iplanet\servers\docs\myservlets).
The jsp1.jsp page calls the servlet.class and in return the servlet redirects to jsp2.jsp page.
My question is: what paths should I use in jsp1.jsp file and in servlet.class file?
Thanks in Advance for all your help,
~ Nirav

There is a major security breach in authenticating
iPlanet Web Server 6.0 SP3 and SP4 using Sun ONE
Directory Server. Using a valid user id, any
password except null string would allow user access
the restricted resources. iPlanet Web Server 6.0 SP5
and 4.1 SP12 worked fine with similar configuration.Did you get an answer for this?
We are having the exact same problems with our iPlanet Web server 6.0 SP3.
thank you.

Primary key foreign key remove problem

hi expretrs,
I create 5 tables in ddic.
1. zpr_cmp Company Master
2. zpr_dpt Department Master
3. zpr_dsg Designation Master
4. zpr_emp Employee master.
5. zpr_slm Salary Master.
Foreign key reference in zpr_emp from table 1,2 and 3 created and
table zpr_emp has
cmpcd, Company Code
empcd, Employee Code
dptcd , Department Code
dsgcd Designation Code
as key fields.
I have upload data and create module pool and reports.
My problem that hr person say that we want to change deptcd/dsgcd of employee (zpr_emp) and
dptcd and dsgcd is as key fields in zpr_emp when i change the table zpr_emp and remove
two key fields dptcd/dsgcd and active error display.
I also try with se14 (Activate and Adjust database) but error still.
how can i remove key field from zpr_emp and active table without loss data and without any change of
module pool/reports
pl. help

Diagnosis
ZPR_EMP table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
Procedure
If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
If necessary, maintain the deleted foreign keys again.
Value table - It's a field in a domain it helps in domain level data validation.
Check table - unlike value table it helps in feild level data validation.
The relational data model contains not only tables, but also relationships between tables. These relationships are defined in the ABAP/4 Dictionary by foreign keys. An important function of foreign keys is to support data integrity in the relational data model. Foreign key fields may assume only those values allowed by the check table, in other words, values occurring in the primary key of the check table.
A foreign key provides a link between two tables, for eg.,T1 and T2 by including a reference in table T1 to the primary key of table T2. For this purpose, Foreign key fields assigned to the primary key fields of T2 are included in T1. Table T1, which is the one being checked, is called a foreign key table, and table T2 is called a check table. The terms dependent (foreign key) table and referenced (check) table are also used.
VALUE TABLE:If the domain of the check field has a value table, this is proposed by the system as check table in the foreign field maintenance. The key fields of the value table are in this case assigned fields of the foreign key table with the same domain. These fields may assume only those values allowed by the value table.
The value range of the domain can be defined by specifying value table.All table fields referring to this domain can then be checked against the corresponding field of this value table.In order the check can be executed, a foreign key must be defined for the value table.

Fix with remove problem

Using the Essbase version 6.2 I have tried without luck to do a fix combined with remove.My problem is that I want to remove 2 nodes. If have tried the following.FIX (@remove(@idescendants(D_ABM_MEASURE),"TOTAL COST"));CALC DIM (D_ABM_GL_ACC_DIM, D_ABM_YEARSCEN_DIM, D_ABM_BU_DIM, D_ABM_LEDGER_DIM,D_ABM_RES_DIM, DAC_DEPARTMENT, D_ABM_TIME_DIM);ENDFIXAnd this works, but it only removes one node (Total Cost). To remove a second one I use the list function as a second parameter. Which looks like this:FIX (@remove(@idescendants(D_ABM_MEASURE),@LIST(PERCENT, "TOTAL COST")));CALC DIM (D_ABM_GL_ACC_DIM, /.../D_ABM_TIME_DIM);ENDFIXWhen I run this it doesn't calculate anything.RegardsHenrik.

I think a closed brace is missingtry this FIX (@remove(@idescendants(D_ABM_MEASURE),@LIST(PERCENT, "TOTAL COST")))); CALC DIM (D_ABM_GL_ACC_DIM, /.../ D_ABM_TIME_DIM); ENDFIX

Pin removal problem in iPlanet CMS / DS

Similar Messages

Maybe you are looking for