Pipeline Tracing Enabled, Original.EML / Routing.EML / SMTP.EML not show some times.

Hi All,
I had enabled Pipeline Tracing on both my Mailbox 2013 (DAG).
Noticed some times the message log in the pipeline trace folder doesn't show all 3 EML files in it.
Under what circumstance Original.EML is not logged, but Routing.EML / SMTP.EML is logged, or vice versa?
Hope someone can help me on this.
Thanks and Regards,
Low

Hi,
The message snapshot files that are created in the following list:
• Original.eml 
• Routingnnnn.eml  
• SmtpReceivennnn.eml 
Which one do you miss？
Another question, for the problematic
snapshot xml file, is there any common points, such as they are all from external, they are from the same senders, recipients or have attachments, ect?
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

  • This is what I get when I try to download my college text: This document requires global security policy to be disabled.  Please go to Edit Preferences JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions

    My college text is on my college website. When I try to download it this is what I get:
    "This document requires global security policy to be disabled.
    Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
    Message code: 005"
    Help

    matermax wrote:
    Please go to Edit > Preferences > JavaScript and uncheck the "Enable global object security policy" checkbox. NOTE: In some versions of Adobe Reader you may need to enable JavaScript first.
    And - did you?

  • Production Order routing not showing process time

    Dear Guru's
    After creating production order , routing is not showing processing time, though its maintained in the standard values. What could be the problem?
    Thanks in advance.
    Regards,
    PPQMUSER

    Hi,
    U should check ur processing formula used in work centre. If it is correct and your routing is showing correct data then do READ PP MASTER DATA in your production order.
    It will help you.
    Regards,
    Alok Tiwari

  • E1000 Router Wireless signal will disappear after some time

    Hi,
    I have set up the E1000 this week, i found that the wireless signal would disappear after some time if the wireless connection is not in use.
    For example, on my iphone
    1. I search for the wireless signal and successfully got the IP
    2. after using for some time, i put the iphone aside
    3. when i want to use the wireless again, the iphone is not yet connected to the wireless 
    4. i would then need to search for the wireless signal and connect again.
    This causes problems because i am using some VPN connection at my laptop and it would disconnect it.
    Is there any config that would keep the wireless signal ?
    Thanks!

    Try changing the wireless channel on the router.
    Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
    See if that helps you.

  • My roboform toolbar has disappeared. It shows that it is enabled in add-ons but it does not show up on the browser. I am using Windows XP.

    Firefox Version 22.0

    Thanks for your attempted help. I went back to an earlier version of Firefox, which restored the Roboform toolbar. Then, when my automatic updater ran, the Roboform toolbar remained.
    I like Firefox, but it is sometimes like a high-maintenance chick; very needy!

  • Just got comcast triple play.  Original ipad sees network but will not connect.

    Just got comcast triple play.  Original ipad sees network but will not connect.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Programaticaly remove(disable/enable) origin server from WebCache Cluster

    Hi.
    Can I programaticaly disable/enable origin server (OAS) from WebCache Cluster for safe node Up/Down ?
    Thanks.

    I found only one way - simulate HTTP request from web console by wget.
    wc_balance.bat (windows script):
    @rem Using a script: parameter ON - enable node, OFF - disable node
    @rem server env
    set HOST=class4.tst.lan:4000
    set AUTH=ias_admin:system
    @rem req env
    set u_host=class4.tst.lan
    set u_port=7888
    set u_capacity=100
    set u_numRetry=5
    set u_url=/
    set u_interval=10
    @rem !!! line number server in the Origin Server !!!
    set u_id=h2
    set U1="hostname=%u_host%&port=%u_port%&routing=%1&capacity=%u_capacity%&numRetry=%u_numRetry%&URL=%u_url%&interval=%u_interval%&SSL_TYPE=NONE&ACTION=Submit&id=%u_id%&SCREEN_ID=CGA.Site.OriginServers_Edit"
    set U2="webcacheadmin?SCREEN_ID=CGA.ConfigTree&ACTION=Apply+Changes"
    @rem set new status
    wget http://%AUTH%@%HOST%/webcacheadmin?%U1%
    @rem commit changes
    wget http://%AUTH%@%HOST%/webcacheadmin?%U2%
    Message was edited by:
    sisaev

  • How to debug "pipelined parallel enable table function" ?

    Dear All,
    Normally we can retrieve output from a "pipelined parallel enable table function " by using SQL statement, such as
    select output from table(pipelined_function(arg1));
    Can anyone alight me how to call this function purely using PL/SQL statement?
    Reason for this : We have third party developer develooped a complicate "pipelined parallel enable table function" and this function is currently calling by SQL (select output from table(pipelined_function(arg1));
    ), I will like to debug this function, but unable to do so, so far I have done :
    1) compile function with debug option
    2) using Procedure Builder to debug, if I execute the above statement (select output from table(pipelined_function(arg1)); I believe, Procedure Builder will not debug a function from a SQL statement
    3) try to build up a PL/SQL block, but don't know how to it.
    basically I want to debug this "pipelined parallel enable table function " and don't know how to do it, any example will be greate!

    user2302827 wrote:
    Using dbms_output is fine but too tedious. I was looking for a PL/SQL procedure builder that can help to debug a statement like this:
    select output from table(pipelined_function(arg1));
    Any suggestion?I don't know about any procedure builders.
    There is a debugger you can use, though I'd have to think about how to invoke it to use with a pipelined function. The debugger is available in GUI tools like SQL*Developer and TOAD and can be used to walk through a program and set values

  • [solved] exim complains about missing router driver "smtp"

    Seeing the following error:
    paniclog wrote:2014-02-15 14:41:41 Exim configuration error in line 546 of /etc/mail/exim.conf:
      router gmail_relay: cannot find router driver "smtp"
    My configuration:
    exim.conf wrote:
    gmail_route:
      driver = manualroute
      transport = gmail_relay
      route_list = * smtp.gmail.com
    gmail_relay:
      driver = smtp
      port = 587
      hosts_require_auth = $host_address
      hosts_require_tls = $host_address
    Last edited by iwonbigbro (2014-02-15 19:11:11)

    It's okay, I figured it out.  I was following this guide, in the hope it would eliminate the need for me to understand how exim configuration hangs together (I'm used to the simpler Debian exim4 template configuration).  However, it seems after reading the configuration file and noticing the configuration sections, I merely placed the gmail_relay in the wrong section.  Moving into the correct section has solved the problem.

  • I've just enabled match and now my new purchases do not show up on my i tunes account. i can only play them buy going in to purchased playlist.

    I've just enabled match and now my new purchases do not show up on my account. I can only access them buy going into purchase playlist?

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • Why is 'Sherlock' TV show not showing up on my original ipad?

    We have a large shared iTunes library with LOTS of movies, tv shows and music. The library is stored on an 8TB Promise Pegasis RAID drive linked to a mac mini. We aos have three 1 iPhone 4, 2 iPhone 5, 2 original iPads, 1 iPad (3rd generation) and 2 Apple TV's, an old G4 Flat Panel, a 24" imac, a Macbook Pro and a Macbook Air all of which use Home Sharing. The problem I'm having is in NOT being able to see certain purchased TV shows (in this case, the show 'Sherlock' - both seasons and all but one episode of 'Game of Thrones') on the original iPads via Home Sharing. The shows appear on every other device but the original iPads. Also, the entire season of Game of Thrones appears on all other devices...but on the original iPads only the first episode appears...with a link to purchase other episodes - However, I have purchased the entire season...and ALL the episodes are available for viewing on every other device. I should point out that these shows were not ripped from DVDs but purchased from the iTunes store. Each of these devices is linked to the exact same iTunes account for purposes of Home Sharing. I assume it must be something related to both of these iPads running iOS 5.1, but I can't imagine what that issue would be. I had originally thought that it may be due to the fact that 'Sherlock' is in 1080p, but most of the movies are also HD...as is the one episode of 'Game of Thrones' that does appear via Home Sharing, so I ruled that out.
    I realize this is not an earth-shattering issue, but it is a bit of a bother. Any ideas, suggestions or possible fixes would be appreciated.
    Thanks.

    I've the same problem as the original post. I already enabled photo stream for iCloud on both my iPhone 4S and my iPad Air. Both are running iOS 7. I didn't have this problem between my iPhone 4 and my old iPad.  Thanks for any advice.

  • On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

    On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do?  Please don't tell me I have to buy a new Mac to be up to date.

    On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

  • EA4500 Router Device not showing up in device list - Please Help

    Hi all
    I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however.......
    The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
    I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
    So I kind of think the two issues are linked.
    Sorry for the ramble. Can anyone help please.
    Thanks in advance
    Alan

    Further to this issue which I ignored as it did not really cause any issues, I recently clicked a samsung tv device which thinks that is three different devices. It has three lan addresses listed. One of the addresses listed is the original device that will not show up so I suspect that this is why it does not show up.
    It seems that I have a conflict but I can find nothing anywhere to allow me to resolve.
    I cannot even delete the Samsung TV device as its x button is not editable.
    Should I just try removing the cloud connect software. I must admit that I am starting to think that I made a bad decision with this router.
    Any help would be greatly appreciated

  • Mail-enabled Public Folders not showing as enabled in PFMC or EMS

    Good morning
    I have some PF's that are mail enabled, but running the Get-PublicFolder cmdlet shows "mailenabled" attribute as False. Also, in the PF Management Console, the folder shows as not mail enabled (with an option to enable it).
    I found this thread that seems to be related:
    http://social.technet.microsoft.com/Forums/exchange/en-US/918aad03-c96f-4023-89cc-ec2c66e51b93/mailenabled-public-folders-not-showing-as-mailenabled?forum=exchangesvrgenerallegacy
    I'd like to do some testing, but recreating this issue with a test PF is actually really hard.
    Does anyone know a way to force that "mailenabled" attribute to False after mail-enabling a PF? I can't find any ADSI attribute that is obvious. I changed MsExchRecipientTypeDetails to <not set> but that didn't do it...
    **UPDATE** I just found out that msExchMailboxGuid is missing from that object. Does anyone have any kind of suggestion for how I can find the Guid of the mailbox that is no longer associated with this PF?
    **UPDATE 2** I have found other PF's that are missing this attribute, but they are not displaying any symptoms. They are showing as mail enabled in the EMS and PFMC. So I guess this isn't a required attribute.
    Could anyone explain the purpose of this attribute for mail-enabled public folders? I just assumed it was required.
    Thanks!

    Hi,
    Do you migrate these mail-enabled public folders from previous Exchange server to Exchange 2010?
    Please check if you can see the SMTP address for mail-enabled public folders via Properties of Public folders.
    Please check if they show in the Microsoft Exchange System Objects in ADUC.
    Besides, I recommend you mail disable the public folder and then mail enable it again to check the result in the Public Folder Management Console.
    For a mail-enabled recipient, a minimum set of attributes is required to make all Exchange components work properly. For example, a mail-enabled entry (a user, contact, group, or public folder) has to have at least these attributes: mailNickname, legacyExchangeDN,
    and displayName. Without the mailNickname attribute, an object is not considered mail-enabled.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • SMTP does not start on port 587

    I just activated IMAP and SMTP on an old G5 Server running the latest version of Leopard.
    Everything, but for one thing, runs fine.  IMAP works correctly from both the local network and any distant network I could try it.  SMTP runs fine on the local network but only on port 25.  Nothing is listening on port 587, or 465.  Hence, SMTP does not work from a distant network. 
    The firewall is off, but even from the localhost, or any machine for that matter, telneting to port 587 does not get an answer :
    telnet 127.0.0.1 587
    Trying 127.0.0.1...
    telnet: connect to address 127.0.0.1: Connection refused
    telnet: Unable to connect to remote host
    I did activate ssl for smtp in the Advance>Security tab.  It uses the same selfsigned certificate as IMAP, which works fine.  I can also tunnel in from a distant machine and SMTP will work. 
    I tried to uncomment the following four lines in master.cf
    #smtps     inet  n       -       n       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    but I only lost connection on port 25 and got nothing on port 587.  This feels good, but I have no idea where to go from here.
    Any one has any suggestion ?

    I understand well that this is exactly SMTP, but just running on a different port, port 587, for submission, while port 25 is for relaying between server
    That's pretty much it, except that port 587 should be configured to accept mail from authenticated users only (as determined by the line:
      -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    This enables authenticated users (e.g. users who have accounts on the server) to send mail through the server without restriction (e.g. they can be remote) while unauthenticated users (including remote mail servers sending mail to your domain) use the standard port 25
    should I uncomment the lines for smtps in order to use SSL ?
    smtps is still different from SMTP (25) and submission (587). Both SMTP and Submission can use SSL if you enable tls support - tls enables a connection to start off insecure/unencrypted and switch to encrypted if both the client and server acknowledge they support it. It's generally not recommended to require SSL/TLS unless you're sure every client that's going to use that service can support (and is configured to use) encryption.
    smtps (which requires SSL) is now deprecated in favor of TLS (which allows the server to support both encrypted and unencrypted connections on the same port number).

Maybe you are looking for